Gebruiksaanwijzing /service van het product CDA-7862 van de fabrikant Alpine
Ga naar pagina of 28
EN FR ES ES IT SE R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
CD changer for CDA-7965/ CDA-7864/CDA-7863/CDA-7862 Changeur CD pour CDA-7965/ CDA-7864/CDA-7863/CDA-7862 Cambiador de CD para CDA-7965/ CDA-7864/CDA-7863/CDA-7862 CHA-S624 CD changer for CDA-7965/ CD.
1 -EN ENGLISH Contents Operating Instructions W ARNING W ARNING ................................................. 2 CA UTION .................................................. 2 PRECA UTIONS ........................................ 2 Basic Operation Detaching the Front Panel .
2 -EN WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION A WA Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
3 -EN Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Inserting Discs Y our player accepts only one disc at a time for playback.
4 -EN Detaching the Fr ont Panel 1 Press the PWR (P ower) b utton for more than 3 seconds to turn off the power . 2 Press the (Release) button at lo wer left corner until the front panel pops out. 3 Grasp the left side of the front panel and pull it out.
5 -EN Mov able display The mov able display ma y be adjusted to 3 diff erent angles depending upon user preference . 1 Press the ANGLE 8 or 9 button to adjust the angle of the mov able displa y . NOTES • The display will close a half minute after the ignition key is turned to the OFF position.
6 -EN Displaying Time 1 Press the CLK (clock) b utton repeatedly until the time is displa yed. Each press changes the modes as f ollows: Radio mode CD Player/Changer modes NO TE Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily .
7 -EN → DIM → SUBW → BEEP → MUTE DEMO ← A UX ← SCR ← → DIM → SUBW → BEEP → MUTE DEMO ← A UX ← SCR ← → SUBW → BAS → TRE VOL ← F AD ← BAL ← → DIM → SUBW → B.
8 -EN Basic Operation MODE INTLZ/DISP SOURCE A.PROC BLA CK OUT TUNE DN g f UP Setting the A UX Mode Y ou can input TV/video sound by connecting an optional Ai-NET/RCA Interf ace cable (KCA-121B) to this component. 1 Press and hold the INTLZ b utton for more than 2 seconds.
9 -EN Default values BC: 80 Hz BW: WIDE1 TC: 10.0kHz HP: OFF LP: OFF SUBW (Phase): NOR NOTES • If you turn the battery power OFF , all settings r eturn to factory default. • If HP , LP , BC , and TC ar e all set to ON, depending on the BC and TC settings, you may not be able to r einforce the sound effect.
10 -EN Displaying the Title/T ext It is possible to displa y the CD/Station title if the title has been pre viously inputted. For details , see Titling Disc/Station (page 11). T ext inf or mation, such as the disc name and the trac k name, will be displa yed if pla ying a CD text compatible disc.
11 -EN Titling Discs/Stations It is possible to title y our fa vorite CD's or radio stations. 1 Press the TITLE button and select the title displa y mode. For details , see Displaying the Title/T e xt (page 10). 2 Press and hold the TITLE button f or at least 3 seconds.
12 -EN A utomatic Seek T uning 1 Press the SOURCE button until a r adio frequency appears in the displa y . 2 Press the B AND button repeatedly until the desired radio band is displa yed. Each press changes the band: → F1 → F2 → AM 3 Press the TUNE button to illuminate the DX and SEEK indicators in the displa y .
13 -EN Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory . 2 Press and hold any one of the Preset b uttons (1 through 6) f or at least 2 seconds until the station frequency on the displa y blinks.
14 -EN Mono/Stereo Switching 1 Press the "F" button to illuminate the FUNC (Function) indicator . 2 "ST" indicator appears when a stereo FM station is tuned in. Press the MONO button to s witch from stereo to monaural FM reception.
15 -EN Opening and Closing the Mo vable displa y 1 Press the c button. The mov able displa y will open. T o close the movab le displa y , press the c button again. The mov able displa y will close. NOTES • Do not apply shock to the movable display when it is open as it may r esult in malfunction of the unit.
16 -EN CD Player Operation SOURCE BAND Disc Select buttons (1 through 6) f UP DN g M.I.X. F RPT SCAN Fast Forwar d and Backwar d 1 Press and hold the DN g or f UP button to quickly mo ve bac kward or forw ard until you reach the desired section of the trac k.
17 -EN Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer ma y be connected to the CD A-7965/CDA-7864/ CD A-7863/CD A-7862 if it is Ai-NET compatible .
18 -EN Remote Contr ol Operation REMOTE CONTROL UNIT RUE - 4185 MUTE CD-CHG SOURCE A.PROC ENT BAND PROG PWR VOLUME 1 2 3 4 5 6 8 7 9 ! # 8 g Button Radio mode: SEEK (DN) Button CD mode: Press the button to go back to the beginning of the current trac k.
19 -EN Battery Replacement Applicable battery: Use two "AAA" siz ed dr y batteries or equivalent. 1 Opening the batter y cov er Slide out the batter y cov er while fir mly pressing outward. 2 Replacing the battery Put the batteries in the case obser ving the polarities as illustrated.
20 -EN Information CD CD Player/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool. CD playback sound is wavering. • Moisture condensation in the CD Module.
21 -EN Specifications FM TUNER SECTION T uning Range 87.7 – 107.9 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 80 dB Stereo Separation 45 dB Capture Ratio 2.
22 -EN Installation and Connections Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use. W arning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage.
23 -EN Installation Caution When you install this unit in your car , do not remove the Detachable Front Panel. If the Detachable Front Panel is removed during installation, you might press too hard and warp the metal plate that holds it in place. 1 Remov e the Detachable F ront P anel (ref er to page 4).
24 -EN Installation and Connections Connections ∗ When Subwoofer is set to OFF: Output is fr om Rear speakers. When Subwoofer is set to ON: Output is fr om Subwoofer . For details on how to set the Subwoofer to ON/OFF , see "Subwoofer On and Off" on page 7.
25 -EN & Left Rear (+) Speaker Output Lead (Green) (CD A-7864/CD A-7863/CD A-7862 only) ( Left Rear (–) Speaker Output Lead (Green/ Black) (CD A-7864/CD A-7863/CD A-7862 only) ) Left Front (–).
26 -EN.
Een belangrijk punt na aankoop van elk apparaat Alpine CDA-7862 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alpine CDA-7862 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alpine CDA-7862 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alpine CDA-7862 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alpine CDA-7862 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alpine CDA-7862 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alpine CDA-7862 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alpine CDA-7862 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
