Gebruiksaanwijzing /service van het product FS-4400 van de fabrikant Fortec
Ga naar pagina of 31
.
GENERAL INFORMA TION INSTALLATION MENU INFORMA TION 3 7 9 Main Features For your Safety Unpacking General Operation RCU 3 4 5 5 6 Front Panel Rear Panel Connecting to TV& VCR using SCART support Connecting to TV using RCA support Connecting to Digital Amplifier 7 7 7 8 8 Main Menu 1.
4. T ools 4.1 Information 4.2 Factory Setting 4.3 Upgrade by USB 4.4 USB 5. Game 6. REC 6.1 Record Mangager 6.2 HDD Information 6.3 HDD Format 6.4 PVR Setting 7. Hot key 7.1 Info 7.2 EPG 7.3 Find 7.4 Numer 7.5 TV/Radio 7.6 Up/Down 7.7 Left/Right 7.8 Mute 7.
A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features.
For Y our Safety Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-and- water solution and wrung out thoroughly, and then wipe again with a dry cloth.
General Operation Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions.
RCU Key Function Turns power ON/OFF of the DSR When watching a channel, mute the sound Switches between TV and Radio mode 0~9 MENU EXIT OK, LIST PR+, PR- Enter number of the required menu item or sele.
Rear Panel Rear Panel Connecting to TV using SCART support TV DSR SCART IN Satellite Dish Rear Panel Front Panel LNB IN: CONNECT TO SA TELLITE ANTENNA LNB OUT :CONNECT TO THE OTHER RECEIVER CONNECT TO.
Connecting to TV using RCA support Satellite Dish Connecting to Digital Amplifier Satellite Dish DIGITAL AUDIO CONVERTOR OR AMPLIFIER SPEAKER DIGITAL AUDIO L R TV IN L R IN VIDEO TV AUDIO.
Main Menu This menu consists of 6 major main menus as follow. - Edit Channel - Installation - System Setup - T ools - Game - REC During the installation the OK key confirms a selection and LIST key shows Down List Box if the column has 34 mark. Y ou can also use the numeric keys on the RCU to enter numeric value.
If there is no program, you can not exit from the Main Menu window by pressing MENU or EXIT key. System will inform "No channel" and the following items turn grey . 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted.
3. Press FAV key to move the FA V button upward. Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key, and then you will find the favourite mark is displayed at the right side of the selected program.
7. Press blue colour key to enter into the Edit channel window. Press red colour key to pop up the Sort drop- down list. Name(A-Z): The ascending order , omitting the $ character, the number is ahead, then the capital letter, at last the lowercase. Name (Z-A): The opposite order of the above Name (A-Z).
If the name is empty , system will pop up a dialogue informing "Name" once yellow colour key is pressed. Press OK key to close this dialogue. In Delete window, press blue colour key to move the Delete button upward. Select the program and press OK key to mark this program with the deletion mark.
2. Installation 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted. The default password is "0000". 2. Press PR+, PR- keys to move the cursor up or down.
4. Press green colour key to pop up the Add Satellite window. Since the same operation as the above Edit Satellite window, here we don't explain any more. 5. Press blue colour key to pop up the dialogue "Are you sure to delete?". Select Yes button and press OK key to delete the selected satellite.
4. Motor Setting: Press OK key to the Motor Setting window. Satellite: Press keys to select the satellite in circle. Or press OK key to pop up the drop- down list, then select the desired satellite in the list and press OK key to confirm. Transponder: The same operation as the above.
6. If select USALS, Delete All item will turn grey. Local Longitude, Local Latitude: Press keys to switch between West and East, or press keys to switch between North and South. Press OK key to enter into the editing mode. Use numeric keys (0-9) to input the longitude or latitude, press MENU key or EXIT key to exit.
2.5 Multi Satellite Search From the Multi Satellite Search window, you can search several satellites at the one time. 1. Satellite : All selected satellites in the satellite list window are displayed on the down part. You can press keys to switch among them.
4. Press yellow colour key to pop up dialogue " Are you sure to delete?". Press OK key at the Yes button to delete the selected TP , or press EXIT key to cancel the operation. 5. Press blue colour key to pop up the TP Search window. FTA only, Scan Channel, Network Search: Press keys to select the proper option.
Press PR+, PR- key to move the cursor up or down, while press keys to change the setting and the setting will take effect immediately. 1. Display Mode: Select among Auto,PAL, PAL-M, PAL-N, NTSC. 2. Aspect Mode: Select among 4:3LetterBox, 4:3PanScan, 16:9.
2. Timer Service: Select between Channel and Message. If Channel is selected, the Wakeup Channel is displayed in the following item. If Message is selected, the Wakeup Message is displayed in the following item. In wakeup message, you can select among Birthday , Anniversary, General.
There are 32 favorites group listed in this window. Press PR+, PR- keys to select one and press OK key to the Rename window. Since the same operation as the above the Add Satellite window, here we don't explain any more. 3.7 Favorite 3.6 OSD Setting 1.
4.2 Factory Setting Press OK key to enter into the Factory Setting window. Select Y es button and press OK key to return to the factory setting. All searched channels and set information will be erased. Select No button and press OK key to cancel this operation, or press MENU or EXIT key to cancel and exit.
4.4 USB USB menu will be automatically shown when insert U disk to USB port except auto scan, multi picture, upgrade. Or open USB menu according to Menu -> T ools-> USB. Press OK to enter into this window. USB menu will be disabled when no USB device is plugged.
3.Blue Key: Press Blue Key , will delete all image files in play list, but system will remind you Are you sure? before practical operation, if you select Y es, all file will be deleted and Play list window will be closed. 4.Green key: Press Green Key will show Setup Menu, please see the besides setup menu.
26 6.3 HDD format Press OK at the HDD Format button to pop up the dialogue Are you sure to format the disc? You can select FT A,NTFS or Cancel. 1.Timeshift:If you set timeshift On , it will record the current channel you watch automatically. Then you can press [Pause] / [Fast Backward] / [Slow Backward] key to watch the previous program.
27 : Press OK key at this button to move the cursor to the current time line. : Press OK key to push the time forward or backward by half an hour . : Press OK key to push the time forward or backward by half an hour. : Press OK key to push the time forward or backward by a day .
28 During the viewing, you can press PAUSE key to stop the picture while the volume continues. Y ou can play the picture by pressing PAUSE key once again. 7.9 Pause 1. During the viewing or listening, press OK key to pop up the TV program list or the Radio program list.
29 1. Press FAV key to pop up the favourite group window. 2. Press keys to select the favorite group. Press PR+, PR- keys to select the channel up or down.. Press OK key at the selected channel to view it in full-screen. Press MENU or EXIT key to exit.
30 Problem Possible causes What to do The display on the front panel does not light up. No sound or picture, but the front panel shows red light. Main cable is not connected. The is in standby mode. receiver Check that the main cable is plugged into the power socket.
Een belangrijk punt na aankoop van elk apparaat Fortec FS-4400 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Fortec FS-4400 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Fortec FS-4400 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Fortec FS-4400 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Fortec FS-4400 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Fortec FS-4400 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Fortec FS-4400 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Fortec FS-4400 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
