Gebruiksaanwijzing /service van het product 60c van de fabrikant Fortinet
Ga naar pagina of 62
FortiGate 60 Installation Guide INTERNAL DMZ 4 3 2 1 LINK 100 LINK 100 LINK 100 LINK 100 LINK 100 LINK 100 LINK 100 WAN 1 WAN 2 PWR ST A TUS Ve r s i o n 2 .
© Copyright 2005 Fortine t Inc. All rights rese rved. No part of this publication incl uding text, examples , diagrams or illustrations may be reproduced, transmitted, or translated in any form or by an y means, electro nic, mechanical, manual, optical or otherwise, for any purpose, without prio r written pe rmission of Fort inet Inc.
Contents FortiGate-60 Installation Guide 01-28008-0018-20050128 3 Table of Contents Introduction ............. .............................. ........................................................ ......... 5 Secure installation, configurat ion, and management .
Contents 4 01-28008-0018-2005012 8 Fortinet Inc. Using the command line interface... ......................... ....................... ....................... ........... 30 Configuring the FortiGate unit to operate in NAT/Route mode ...... ..........
FortiGate-60 Inst allation Guide V ersion 2.80 MR8 FortiGate-60 Installation Guide 01-28008-0018-20050128 5 Introduction FortiGate A ntivirus Firewalls im prove network se curity , reduce network misu se and abuse, and help you use communication s resources more efficiently without compromising the performance of yo ur netw ork.
6 01-28008-0018-2005012 8 Fortinet Inc. Secure installation, configurat ion, and management Introduction The CLI or the web-based manager can then be used to comple te configuration and to perform maintenance and administration.
Introduction Document conventions FortiGate-60 Installation Guide 01-28008-0018-20050128 7 Setup wizard The FortiGate setup wizard p r ovides an easy way to configure the basic initial settings for the FortiGate unit.
8 01-28008-0018-2005012 8 Fortinet Inc. FortiGate documentation Introduction For example: set allowaccess {ping https ssh snmp http telnet} Y ou can enter any of the following: set allowaccess ping se.
Introduction Related documentati on FortiGate-60 Installation Guide 01-28008-0018-20050128 9 • FortiGate I PS Guide Describes how to configure the FortiGate Intrusion Prevention System setting s and how the FortiGate IPS deals with some common att a cks.
10 01-28008-0018-2005012 8 Fortinet Inc. Customer service and technical support Introduction FortiMail documentation • FortiMail Administration Guide Describes how to install, configure, and manage .
Introduction Customer service a nd technical suppo rt FortiGate-60 Installation Guide 01-28008-0018-20050128 11 For information on Fortinet tele phone su pport, see http://support.
12 01-28008-0018-2005012 8 Fortinet Inc. Customer service and technical support Introduction.
FortiGate-60 Inst allation Guide V ersion 2.80 MR8 FortiGate-60 Installation Guide 01-28008-0018-20050128 13 Getting st arted This section describes unp acking, setting up, and powering on a FortiGate Antivirus Firewall unit.
14 01-28008-0018-2005012 8 Fortinet Inc. Package contents Getting started Package content s The FortiGate-60 p ackage contains the following items: • FortiGate-6 0 Antivirus Firewall • one orange .
Getting sta rted Turning the Fo rtiGa te unit power on and off FortiGate-60 Installation Guide 01-28008-0018-20050128 15 Power requirements • DC input voltage: 12 V • DC input current: 3 A Environ.
16 01-28008-0018-2005012 8 Fortinet Inc. Connecting to the web-based manager Getting started Connecting to the web-based manager Use the followin g procedure to connect to the web-based manager for the first time.
Getting started Connecting to the command line interface (CLI) FortiGate-60 Installation Guide 01-28008-0018-20050128 17 Connecting to the command line interface (CLI) As an alternative to the web-based ma nager , you can install and configure the FortiGate unit using the CLI.
18 01-28008-0018-2005012 8 Fortinet Inc. Quick installation us ing factory defaults Getting started Quick inst allation using factory default s Y ou can quickly set up your FortiGate unit for a home or sm all office using the web- based manager a nd the factory default FortiG ate configur ation.
Getting started Factory default FortiGate configurati on settings FortiGate-60 Installation Guide 01-28008-0018-20050128 19 7 Select one of the following DNS settings • Obtain DNS se rver address au.
20 01-28008-0018-2005012 8 Fortinet Inc. Factory default FortiGate confi guration settings Getting started Factory default NAT/Route m ode network configuration When the FortiGate unit is first p o wered on , it is running in NA T/Rout e mode and has the basic netw ork configuration list ed in T able 3 on pag e 20 .
Getting started Factory default FortiGate configurati on settings FortiGate-60 Installation Guide 01-28008-0018-20050128 21 Factory default Transparent mode network configuration In T ransparent mode, the FortiGate un it has the default network configuration listed in Ta b l e 4 .
22 01-28008-0018-2005012 8 Fortinet Inc. Factory default FortiGate confi guration settings Getting started The factory default firewall configu ration is the same in NA T/Route and T ranspar ent mode.
Getting started Planning the FortiGate configura tion FortiGate-60 Installation Guide 01-28008-0018-20050128 23 Figure 5: Web protection profile settings Planning the FortiGate configuration Before you configure the Fo rtiGate unit, you need to plan how to integrate the unit into the network.
24 01-28008-0018-2005012 8 Fortinet Inc. Planning the FortiGa te configuration Getting started Y ou must configure routing to support the redundant W AN1 and W AN2 internet connections. Routing can be used to au tomatically redirect connections from an interface if its connectio n to the external network fails.
Getting started Planning the FortiGate configura tion FortiGate-60 Installation Guide 01-28008-0018-20050128 25 Otherwise, security policy configuration is similar to a NA T/Route mode configuration with a single Internet connection.
26 01-28008-0018-2005012 8 Fortinet Inc. Next steps Getting started Configuration options Once you have selected T ranspar ent or NA T/Route mode operatio n, you can complete the configuration plan an d begin to configure the FortiGate unit. Choose among three dif ferent tools to configure the FortiGate unit.
FortiGate-60 Inst allation Guide V ersion 2.80 MR8 FortiGate-60 Installation Guide 01-28008-0018-20050128 27 NA T/Route mode inst allation This chapter describes how to inst all the FortiGate un it in NA T/Route mode. For information about installing a FortiGate unit in T ransparent mode, see “Tr ansparent mode inst allation” on pag e 39 .
28 01-28008-0018-2005012 8 Fortinet Inc. Using the web-based ma nager NAT/Route mode installa tion DHCP or PPPoE configuration Y ou can configure any FortiGate interface to acquire its IP address from a DHCP or PPPoE server . Y our ISP may provide IP add resses using one of these protocols.
NAT/Route mode installati on Using the web-based manager FortiGate-60 Installation Guide 01-28008-0018-20050128 29 Configuring basic settings After conne c ting to the web-based manager you can use the following procedures to complete the basic configurat ion of th e FortiGate unit.
30 01-28008-0018-2005012 8 Fortinet Inc. Using the command line interface NAT/Route mode installa tion 1 Go to System > Router > St atic . 2 If the S tatic Route t able contai ns a default route (IP and Mask set to 0.0.0.0) , select the Delete icon to delete this route.
NAT/Route mode installation Using the command line interface FortiGate-60 Installation Guide 01-28008-0018-20050128 31 Example config system interface edit internal set mode static set ip <192.
32 01-28008-0018-2005012 8 Fortinet Inc. Using the setu p wizard NAT/Route mode installa tion T o configure DNS server sett ings • Set the primar y and secondary DNS server IP addresses. Enter config system dns set primary <address_ip> set secondary <address_ip> end Example config system dns set primary 293.
NAT/Route mode installati on Using the setup wizard FortiGate-60 Installation Guide 01-28008-0018-20050128 33 If you are configuring the FortiGate unit to operate in NA T/Route mode (the default), you.
34 01-28008-0018-2005012 8 Fortinet Inc. Connecting the FortiGate unit to the network(s) NAT/Route mode installati on Starting the setup wizard 1 In the web-based manager, sele ct Easy Setup Wizard.
NAT/Route mode installati on Connecting the FortiGate unit to the ne twork(s) FortiGate-60 Installation Guide 01-28008-0018-20050128 35 • One DMZ port for connectin g to a DMZ network. • Modem is the interface for connecting an external modem to the FortiGate-60 .
36 01-28008-0018-2005012 8 Fortinet Inc. Configuring the netw orks NAT/Route mode installati on Configuring the networks If you are running the FortiGate unit in NA T/Route mode, your networks must be configured to route all Internet traf fic to t he IP address of the FortiGate interface to which they are connected.
NAT/Route mode installati on Next steps FortiGate-60 Installation Guide 01-28008-0018-20050128 37 T o set the date and time For effective scheduling and logging, the FortiGate syst em date and time must be accurate.
38 01-28008-0018-2005012 8 Fortinet Inc. Next steps NAT/Route mode installati on 1 Go to System > Maintenance > Up date Center . 2 Select Refresh to test the FortiGate unit connectivity with the FortiProte ct Distribution Network (FDN).
FortiGate-60 Inst allation Guide V ersion 2.80 MR8 FortiGate-60 Installation Guide 01-28008-0018-20050128 39 T ransp arent mode inst allation This chapter de scribes how to install a FortiGate unit in T ranspar ent mode. If you want to install the FortiGate un it in NA T/Ro ute m ode, see “NA T/Route mode installation” on pag e 27 .
40 01-28008-0018-2005012 8 Fortinet Inc. Using the web-based manage r Transparent mode installa tion Using the web-based manager Y ou can use the web-based manager to complete the initial configuration of the FortiGate unit. Y ou can continue to use the web-based manager for all FortiGate unit settings.
Transparent mode installatio n Using the command line interface FortiGate-60 Installation Guide 01-28008-0018-20050128 41 T o configure DNS server sett ings 1 Go to System > Network > DNS . 2 Enter the IP address of the primary DNS se rver . 3 Enter the IP address of the secondary DNS server .
42 01-28008-0018-2005012 8 Fortinet Inc. Using the command line interface Transparent mode i nstallation The CLI displa ys the status of the For tiGat e unit including the following line of text: Operation mode: Transparent T o configure the management IP address 1 Make sure that you are logge d into the CLI.
Transparent mode installatio n Using the setup wizard FortiGate-60 Installation Guide 01-28008-0018-20050128 43 Example If the default gate way IP is 204.23.1.2 and this gateway is connected to port 2: config router static edit 1 set dst 0.0.0.0 0.0.0.
44 01-28008-0018-2005012 8 Fortinet Inc. Connecting the FortiGate unit to your network Transparent mode installation Connecting the FortiGate unit to your network When you have com pleted the initial conf iguration, you can conne ct the FortiGate unit between yo ur internal netw ork and the Inter net using the In ternal and WAN1 interfaces.
Transparent mode installatio n Next steps FortiGate-60 Installation Guide 01-28008-0018-20050128 45 Next step s Y ou can use the following information to co nfigure FortiGate system t ime, to register the FortiGate unit, and to configure ant ivirus and attack definition updates.
46 01-28008-0018-2005012 8 Fortinet Inc. Next steps Transparen t mode installation 1 Go to System > Maintenance > Up date Center . 2 Select Refresh to test the FortiGate unit connectivity with the FortiProte ct Distribution Network (FDN).
FortiGate-60 Inst allation Guide V ersion 2.80 MR8 FortiGate-60 Installation Guide 01-28008-0018-20050128 47 High availability inst allation This chapter describes how to install two or more FortiGate units in an HA cluster .
48 01-28008-0018-2005012 8 Fortinet Inc. Configuring FortiGate units for HA operation High availability installati on T a ble 10: High availability settings Mode Active-Active Load balancing and failo ve r HA.
High availability installation Confi guring FortiGate units for HA operation FortiGate-60 Installation Guide 01-28008-0018-20050128 49 Configuring FortiGate units for HA using the web-based manager Use the followin g procedure to configure each FortiGate unit f or HA operation.
50 01-28008-0018-2005012 8 Fortinet Inc. Configuring FortiGate units for HA operation High availability installati on T o configure a FortiGate unit for HA operation 1 Go to System > Config > HA . 2 Select High Availability . 3 Select the mode. 4 Select a Group ID for the HA cluster .
High availability installation Conne cting the cluste r to your networks FortiGate-60 Installation Guide 01-28008-0018-20050128 51 T o configure the FortiGate unit for HA operation 1 Configure HA settings.
52 01-28008-0018-2005012 8 Fortinet Inc. Connecting the cluster to your ne tworks High availability installation Inserting an HA cluster into your networ k temporar ily interrupt s communications on the network because new phys ical connections are being made to route traf fic through the cluster .
High availability installation Inst alling and configu ring the cluster FortiGate-60 Installation Guide 01-28008-0018-20050128 53 2 Power on all the FortiGat e units in the cluster . As the units st art, they negotiate to choose the primary cluster unit and the subordinat e units.
54 01-28008-0018-2005012 8 Fortinet Inc. Installing and configuring the cluster High availability installati on.
FortiGate-60 Inst allation Guide V ersion 2.80 MR8 FortiGate-60 Installation Guide 01-28008-0018-20050128 55 Configuring the modem interface The FortiG ate-60 includes th e option of an external modem for use as e ither a redundant interface or a st andalone interface in NA T/Route mode.
56 01-28008-0018-2005012 8 Fortinet Inc. Selecting a modem mode Configuring the modem interface For the For tiGate unit to switc h from an ethe rnet interface t o the modem yo u must select the name of the interf ace in the modem configuration and configure a ping server for that interface.
Configuring the modem i nterface Configuring modem settings FortiGate-60 Installation Guide 01-28008-0018-20050128 57 3 Configure other modem settings as required. See “Configuring modem settings” on page 5 7 . Make sure there is correct info rmation in one or more Dialup Accounts.
58 01-28008-0018-2005012 8 Fortinet Inc. Connecting and disconnecting the modem in Stand alone mode Configuring the modem interface Y ou can configure and use the modem in NA T/Route mode only . T o configure modem settings 1 Go to System > Network > Modem .
Configuri ng the modem interface Defining a Ping Server FortiGate-60 Installation Guide 01-28008-0018-20050128 59 5 Select Dial Now . The FortiGate unit initiates dialing into ea ch dialup acco unt in turn until the modem connect s to an ISP . Modem status is one of the following: A green check mark indicates the active dialup account.
60 01-28008-0018-2005012 8 Fortinet Inc. Adding firewall policies for modem conn ections Configuring the modem interface 3 For Fail-over Detection, type a number of times that th e connec tion test fails before the FortiGate unit assumes that t he gateway is no longer function ing.
FortiGate-60 Installation Guide 01-28008-0018-20050128 61 FortiGate-60 Inst allation Guide V ersion 2.80 MR8 Index A auto-dial 57 C CLI 6 configuring IP addresses 41 configuring NAT/Route mode 30 conn.
62 01-28008-0018-2005012 8 Fortinet Inc. Index S set time 37, 45 setup wizard 28, 32, 40, 43 starting 2 9, 34, 40, 43 standalone mode configuring 56 modem 55, 56 starting I P DHCP 20 synchronize with .
Een belangrijk punt na aankoop van elk apparaat Fortinet 60c (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Fortinet 60c heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Fortinet 60c vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Fortinet 60c leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Fortinet 60c krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Fortinet 60c bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Fortinet 60c kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Fortinet 60c . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
