Gebruiksaanwijzing /service van het product A74ML-K van de fabrikant Foxconn
Ga naar pagina of 105
A74ML Series Motherboard User ’ s Manual.
Statement: This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modied at any time, Foxconn does not obligate itself to inform the user of these changes. T rademark: All trademarks are the property of their respective owners.
Declaration of conformity HON HAI PRECISION INDUSTRY COMP ANY L TD 66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT , T AIPEI HSIEN, T AIW AN, R.O.C. declares that the product Motherboard A74ML/A74ML.
Declaration of conformity T rade Name: FOXCONN Model Name: A74ML/A74ML-K Responsible Party: PCE Industry Inc. Address: 458 E. Lambert Rd. Fullerton, CA 92835 T elephone: 714-738-8868 Facsimile: 714-73.
Installation Precautions Please carefully read the following procedures to install your computer : ■ It is suggested to select high-quality , certied fans in order to avoid damage to the motherboard and CPU due to high temperature. Never turn on the computer if the CPU fan is not properly installed.
T ABLE OF CONTENTS Chapter 1 Product Introduction Product Specications .............................................................................. 2 Layout..........................................................................................
Congure ......................................................................................... 63 About & Help .................................................................................... 65 FOX LOGO .................................
Tha nk you for buy ing Fox con n A 74M L Serie s mothe rbo ard. Fox con n products are engineered to maximize computing power , providing only what you need for break-through performance.
1 2 1-1 Product Specications CPU Support AMD socket AM3 Phenom II TM series processors Support AMD socket AM2+ Phenom TM series processors Support AMD socket AM2 series processors : Athl on TM 64X2.
1 3 Back Panel 1 x PS/2 keyboard port Connectors 1 x PS/2 mouse port 1 x VGA port 1 x Serial port 4 x USB 2.0 ports 1 x RJ-45 LAN port 6-channel Audio ports Hardware Monitor System voltage detection C.
1 4 1-2 Layout 1. 4-pin A TX 12V Power Connector 2. SYS_F AN Header 3. North Bridge: AMD 740G 4. PCI Express x1 Slot 5. PCI Express x16 Slot 6. PCI Slots 7. Front Audio Connector 8. CD_IN Connector 9. S/PDIF Out Connector 10. Speaker connector 1 1. Front USB Connectors 12.
1 5 1-3 Back Panel Connectors 1. PS/2 Mouse Port Use the upper port (green) to connect a PS/2 mouse. 2. PS/2 Keyboard Port Use the lower port (purple) to connect a PS/2 keyboard. 3. Serial Port This is output of RS232 COM1 port. 4. VGA Port T o connect with external display devices, such as monitor or LCD display .
1 6 7. RJ-45 LAN Port The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate. Link LED Active LED LAN T ype Left: Active Right: Link Status Description Status Descriptio.
This chapter introduces the hardware installation process, including the installation of the CPU, memory , power supply , slots, pin headers and the mounting of jumpers.
2 8 2-1 Install the CPU and CPU Cooler Install the CPU Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket. Pin-1 triangle marking of CPU Pin-1 corner of the CPU socket 1. Release the CPU socket lever . 2. A lign Pin-1 of the CPU with the CPU so cke t, a nd ge ntl y put t he CP U onto the socket.
2 9 3. Wh e n C P U i s p ro p er l y s e at e d, push the CPU socket lever back to its locked position. Install the CPU Cooler Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn cooler as the example.) 1.
2 10 2-2 Install the Memory Dual Channel Memory Conguration This motherboard provides two DDR2 memory sockets and supports Dual Channel T echnology .
2 1 1 Installing a Memory If you take a look at fron t sid e of memory modu le, it has asym metr ic pin cou nts on both side s sepa rate d by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install your memory modules into the sockets.
2 12 2-3 Install an Expansion Card Follow the steps below to correctly install your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel. 2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
2 13 2-4 Install other Internal Connectors Power Connectors This motherboard uses an A TX power supply . In order not to damage any device, make sure all the devices have been installed properly before applying the power supply . 24-pin A TX power connector : PWR1 PWR1 is the A TX power supply connector .
2 14 Front Panel Connector : FP1 This motherboard includes one connector for connecting the front panel switch and LED Indicators. Hard Disk LED Connector (HDD-LED) Connect to the chassis front panel IDE indicator LED. It indicates the active status of the hard disks.
2 15 Audio Connector : F_AUDIO The audio connector supports HD Audio standard. It provides the Front Audio output choice. Audio Connector : CD_IN CD_IN is a Sony standard audio connector , it can be connected to a CD/DVD-ROM drive through a CD/DVD audio cable.
2 16 Speaker Connector : SPEAKER The speaker connector is used to connect speaker of the chassis. Fan Connectors : CPU_F AN, SYS_FAN There are two main fan headers on this motherboard. The fan speed can be controlled and monitored in “PC Health Status” section of the BIOS Setup.
2 17 2-5 Jumpers For some featur es neede d, user s can change the jump er sett ings on this mother board to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting.
Since BIOS could be updated some other times, the BIOS information described in this manual is for reference only . We do not guarantee the content of this manual will remain consistent with the newly released BIOS at any given time in the future. Please visit our website for updated manual if it is available.
3 19 Enter BIOS Setup The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance. Power on the computer , when the message " Press <DEL> to enter Setup, <ESC> to boot menu ".
3 20 ► Power Management Setup All the items related with Green function features can be set up through this menu. ► PC Health Status This setup enables you to read/change Fan speeds, and displays temperatures and voltages of your CPU/System.
3 21 System Information This sub-menu is used to set up the standard BIOS features, such as the date, time, oppy drive and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change the setting. AMIBIOS ► Date (mm:dd:yy) <weekday><month><date> <year> format.
3 22 ► Mouse Th e s ys t em b o ot w i ll n o t st o p fo r a m o us e e rr or if y o u en a bl ed th is it em . ► Floppy T h e sy s te m b oo t w il l n ot s t op f o r a f lo pp y e rr o r if yo u e na bl e d th i s it e m. ► Model Name Model name of this product.
3 23 Advanced BIOS Features ► IDE Detect Time Out This item is used to select the time out value for detecting A T A/A T API devices. If the checking time is over the set value, the system will skip it.
3 24 [Disabled] : Displays the normal POST messages. [Enabled] : Displays OEM customer logo instead of POST messages. ► Quick Boot While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the time needed to boot the system.
3 25 Fox Central Control Unit ► Super BIOS Protect T o protect the system BIOS from virus attack, there is a BIOS write-protection mechanism provided. Super BIOS Protect function protects your BIOS from being affected by viruses, e.g. CIH. ► Auto Detect PCI Clock This option is used to auto detect PCI slot.
3 26 ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power-On Self-T est (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals.
3 27 ► PCI Express Clock This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card speed. ► CPU Multiplier Adjust (Optional only if CPU supports) This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can get the CPU speed.
3 28 CPU Conguration This menu shows most of the CPU specications. ► Cool ‘N‘ Quiet (Appear only when CPU supports) This option helps lowering down the CPU frequency and voltage when system is idling. When the CPU speed is slowing down, the temperature will drop as well.
3 29 Advanced Chipset Features ► Memory Conguration/DRAM Timing Conguration Press <Enter> to go to its submenu. ► CAS Latency This item shows the CAS latency .
3 30 It allows you to change the clock rate of graphics engine. ► Surround View SurroundView is the A TI technology that provides multi-graphics controller display capability for both the A TI PCIe-based graphics card and the A TI integrated graphics processor (IGP).
3 31 When disabled, the system will turn off clock on the empty DIMM slots and to reduce EMI (Electro-Magnetic Interference). ► MemClk T ristate C3/A TL VID Enables the DDR memory clocks to be tristated when alternate VID mode is enabled. ► Memory Hole Remapping This item is used to enable/disable memory remapping around memory hole.
3 32 CKE pins per DRAM channel. For each channel : [Channel] CKE control. The DRAM channel is placed in power down when all chip selects associated with the channel are idle. [Chip Select] CKE control. A chip select or pair of chip selects is placed in power down when no transactions are pending for the chip select(s).
3 33 Integrated Peripherals ► IDE Configuration / USB Configuration / SuperIO Configuration / T rusted Computing Press <Enter> to go to relative submenu. ► OnBoard LAN This item is used to enable or disable the onboard LAN controller . ► OnBoard LAN Boot ROM This item is used to enable or disable the onboard LAN boot optional ROM.
3 34 IDE Conguration ► OnBoard PCI IDE Controller [Disabled]: Disable the integrated IDE controller . [Enabled]: Enable the integrated IDE controller . ► OnChip SA T A Channel [Disabled] : Disable SA T A controller. [Enabled] : Enable SA T A controller.
3 35 USB Conguration ► Legacy USB Support This item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, set to auto or enabled. ► USB 2.0 Controller Mode This item is used to set the transmission rate mode of USB 2.
3 36 SuperIO Conguration ► OnBoard Floppy Controller This item is used to enable/disable Floppy Controller . ► Serial Port 1 Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port . ► IR Address This item is used to assign the I/O address and interrupt request (IRQ) for the IR port.
3 37 T rusted Computing ► TCG/TPM Support T rusted Computing Group (TCG) members develop and promote open, vendor-neutral, industry standard specications for trusted computing building blocks and software interfaces across multiple platforms TP M (T rusted Platform Module) is a specication promoted by TCG.
3 38 Power Management Setup ACPI (Advanced Conguration and Power Interface) is an open industry standard interfaces enabling OS-directed conguration, power management, and thermal management of mobile, desktop, and server platforms. It denes ve sleeping states, they are : S1 - The S1 sleeping state is a low wake latency sleeping state.
3 39 ► ACPI Suspend T ype This item is used to set the energy saving mode of the ACPI function. When you select “S1 (POS)” mode, the power is always on and computer can be resumed at any time. When you select “S3 (STR)” mode, the power will be down after a period of time.
3 40 PC Health Status ► W arning T emperature This option is used to set the warning temperature for the system. When the temperature of CPU is higher than the set value, the motherboard will send out warning information. ► Shut Down T emperature This item is used to set the system temperature upper limit.
3 41 BIOS Security Features ► Change Supervisor Password This item is used to install or change supervisor password. After you input Supervisor password, it then will ask you to input user password optionally .
3 42 Load Optimal Defaults Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values. Select this option and press Enter , it will pop out a dialogue box to let you load the defaults.
The util ity CD that came with the moth erbo ard cont ains usef ul soft ware and several utility drivers that enhance the motherboard features. This chapter includes the following information: ■ Uti.
4 44 Utility CD content This mot herb oard come s wit h one Utility CD. Y ou can simpl y put it into your CD/DVD-R OM d rive , and the main menu will be displayed on your PC screen to guide you how to install. 1. Install Driver Use these options to install all the drivers for your system.
4 45 Install driver and utility 1. Install Driver Y ou must click "AMD Chipset Driver" to install it rst. After that, you can click "One Click Setup" to install all the other drivers left, or you can click on each individual driver to install it manually .
4 46 FOX ONE FOX ONE is a powerful utility for easily modifying system settings. It also allows users to monitor various temperature values, voltage values, frequencies and fan speeds at any time.
4 47 1. Main Page T oolbar Use the toolbar to navigate to other pages. Alert Lamp When the system is in healthy state, the color of alert lamp is green. When the system is in abnormal state, the alert lamp color is red. Switch Button Click this button, it will simplify the whole FOX ONE control panel to a smaller information bar (i.
4 48 Skin Button There are more choices of FOX ONE screen panels. Click this button, you can select your favorite skin (FOX ONE Panel). Exit Click this button to exit the program. Minimum Click this button to drop the FOX ONE to Windows system tray located at the lower right corner of your screen.
4 49 Conguration This menu allows you to congure : 1). Monitor interval (ms) : This is to dene the interval of different messages of system settings which are to be displayed on Simple Mode screen. Minimum value is 1 second. 2). Simple Mode : T o select which message of system settings are to be displayed in the Simple Mode.
4 50 Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Y es. Step 2 : After data is collected, it will ask you to restart your computer now .
4 51 2. CPU Page - CPU Control This page lets you select (or overclock) CPU clock to meet the current performance level of the system. The fastest and suitable CPU clock running for current system can be calculated by FOX ONE automatically or manually input by yourselves.
4 52 Y ou can see the system is raising CPU clock until the system hangs. Push RESET button on the front panel of your system to restart the computer . Run FOX ONE program again, it will inform you the previous test found that 255MHz is the recommended CPU clock for your system.
4 53 FOX Intelligent Stepping (F .I.S., Optional) Select FOX Intelligent Stepping will allow your system to automatically adjust your CPU clock rate based on different system loadings. For example, if you select Power Gaming, CPU clock will be driven to run at its maximum speed.
4 54 4. Limit Setting 4.1 Limit Setting - CPU T emperature This page lets you to set CPU high limit temperature and enable the alert function. 4.2 Limit Setting - System T emperature This page lets you to set system high limit temperature and enable the alert function.
4 55 4.3 Limit Setting - CPU Fan This page lets you to set CPU fan low limit rpm and enable the alert function. 4.4 Limit Setting - System Fan This page lets you to set system fan low limit rpm and enable the alert function.
4 56 4.5 Limit Setting - F AN1 Fan This page lets you to set F AN1 fan low limit rpm and enable the alert function. 5. V oltage Page - V oltage Control (Optional) This page lets you set CPU voltage, memory voltage and North Bridge voltage manually . CPU voltage can be stepped up/down by a unit of 12.
4 57 6. Fan Page - Fan Control This page lets you enable Smart Fan function or set the fan speed by manual. When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.
4 58 FOX LiveUpdate FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by local or online. Supporting Operating Systems : ■ Windows 2000 ■ Windows XP (32-bit and 64-bit) ■ Windows 2003 (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit) Using FOX LiveUpdate : 1.
4 59 1-2 Local Update - Backup This page can backup your system BIOS. Y ou can click “Backup”, and key in a le name, then click “Save” to nish the backup operation. The extension of this backup le is ".BIN" for Award BIOS and ".
4 60 2. Online Update 2-1 Online Update - Update BIOS This page lets you update your system BIOS from Internet. Click “start”, it will search the new BIOS from Internet. Then follow the wizard to nish the update operation. 2-2 Online Update - Update Driver This page lets you update your system drivers from Internet.
4 61 2-3 Online Update - Update Utility This page lets you update utilities from Internet. Click “start”, it will search the new utilities from Internet.
4 62 2-4 Online Update - Update All This page lets you update your system drivers from Internet. Click “start”, it will search all new BIOS/drivers/utilities from Internet.
4 63 3. Congure 3-1 Congure - option This page lets you set auto search options. After you enable the auto search function, FOX LiveUpdate will start its searching from Internet and if any qualied item found, it will pop out a message on the task bar to inform you to do the next step.
4 64 When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older , it will auto search from internet and prompt you to install the new version. 3-2 Congure - System This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate utility .
4 65 3-3 Congure - Advance This page lets you select to ash BIOS / Boot Block and clear CMOS. If you choose Flash Boot Block, it means BIOS is not protective, and you must make sure the ash process is continuous and without any interruption. 4.
4 66 FOX LOGO FOX LOGO is a simple and useful utility to backup, change and delete the boot time Logo. The boot Logo is the image that appears on screen during POST (Power-On Self-T est). Y ou can prepare a JPG image (1024x768) le, then use FOX LOGO to open it and change the boot time Logo.
4 67 FOX DMI FOX DMI is a full Desktop Management Interface viewer , and it provides three DMI data formats : Report, Data Fields and Memory Dump. With DMI information, system maker can easily analyze and troubleshoot your motherboard if there is any problem occurred.
This chapter will cover two topics : ■ Creating a Bootable Array - Installing a new Windows XP (or Vista) in a brand new RAID system. ■ Creating a Non-Bootable Array - Existing Windows XP (or Vista) system with new RAID built as data storage.
5 69 Creating a Bootable Array - Installing a new Windows XP (or Vista) in a brand new RAID system. 1. Follow 5-1 to create a RAID driver diskette. 2. Follow 5-2 to set RAID enabled in BIOS. 3. Follow 5-3 to select a RAID array for use. 4. Follow 5-4 to Install a new Windows Operating System.
5 70 RAID Conguration Introduction RAID (Redundant Array of Independent Disks) is a method for computer data storage schemes that divide and/or replicate data among multiple hard drives. RAID can be designed to provide increased data reliability (fault tolerance) or increased I/O (input/ output) performance, or both.
5 71 RAID 0 (Striped) RAID 0 reads and writes sectors of data interleaved among multiple drives. If any disk member fails, it affects the entire array . The disk array data capacity is equal to the number of drive members times the capacity of the smallest member .
5 72 FastBuild Driver The FastBuild driver supports RAID 0 ,RAID 1 and RAID10 functions. It allows you to get high performance with fault tolerance, big capacity , or data safety provided by different RAID functions. Here, we will use four SA T A hard disks as an example to guide you through how to congure your RAID system.
5 73 T wo topics will be covered in the following sections : 1). Creating a Bootable Array - Installing a new Windows XP in a brand new RAID system. 2). Creating a Non-Bootable Array - Existing Windows XP system with new RAID built as data storage. Install SA T A Hard Disks before we continue : ■ Shut down your computer .
5 74 1. Find a PC, put a diskette into its oppy drive A:, this diskette will be formatted later . Put the driver CD into DVD-ROM drive. 2. Depending on which platform your system is, normally , it is a 32-bit XP system. Use Windows explorer , and go to CD:Driver AMDRAIDFloppyWinXP , click on Raid- T ool icon to start the creation.
5 75 6. Y ou can input a volume label for this diskette, click on "Start" to format. 7. Click on "OK" to go through this warning mes- sage. 8. Format nished. Click "OK" to continue copying of RAID driver into this diskette.
5 76 5-2 RAID Enable in BIOS 1. Enter the BIOS setup by pressing <DEL> key when boot up. 2. Select the “Integrated Peripherals” from the “Main menu”, then select the “IDE Conguration” menu and press <Enter> to go to the conguration items.
5 77 Create RAID 0 (Striped) Here, we will show you how to create two RAID 0 Logical Drives (LD) by using two hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears.
5 78 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. Another screen prompts. Press [Ctrl-Y]. Input 80GB to select the rst logical drive (LD1) and press [Enter].
5 79 8. When LD2 is selected, press [Enter] to continue. 9. Y ou can see in the previous example, about 40GB of Channel 1 and 2 hard disks were allocated. Select the remaining spaces from them for RAID0 again. Press [Ctrl-Y] to save the setting. [ Dene LD Menu ] LD No RAID Mode T otal Drv Capacity(GB) Status LD 1 RAID 0 2 79.
5 80 10. A message prompts. Press [Ctrl-Y] to erase the RAID array . 1 1. The remaining disk spaces are assigned to LD2. The size is about 42GB*2 = 84GB.
5 81 Create RAID 1 (Mirrored) Here, we will show you how to create one Mirrored Logical Drives (LD) by using two hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears.
5 82 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. Another screen prompts. Press any key to use the maximum capacity . 7. The selection of LD1 array is completed. The nal capacity of 249.99GB (250GB) is the smaller size of the two hard drives.
5 83 Create RAID 10 (Striped Mirror) Here, we will show you how to create one Striped Mirror Logical Drives (LD) by using four hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears. 2. Press [Enter], the screen appears as below .
5 84 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. Another screen prompts. Press any key to use the maximum capacity . 7. The selection of LD1 array is completed. The nal capacity of 164.56GB (82.28GB*2) is twice capacities of the smallest size of the four hard drives.
5 85 Create RAID Ready A "RAID Ready" system is a specic system conguration that, with the addition of a second Serial A T A hard drive, can be seamlessly migrated to a conguration that provides either improved storage performance or data protection from a single hard drive failure.
5 86 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. The conguration of LD1 array is completed. [ Dene LD Menu ] LD No RAID Mode T otal Drv Capacity(GB) Status LD 1 RAID 0 2 163.
5 87 Create JBOD Here, we will show you how to create a JBOD Logical Drives (LD) by using four hard disks. 1. Select [2] from the main menu, "Dene LD Menu" appears. 2. Press [Enter], the screen appears as below . 3. Use [↓] key to select the hard disks, press [Space] key to change its assignment status to "Y".
5 88 5. A message prompts. Press [Ctrl-Y] to erase the RAID array . 6. The conguration of LD1 array is completed. T otal size is 82.28+1 19.96+250.00+320.
5 89 5-4 Install a New Windows XP Assume a Mirrored array (249.99GB) was created as introduced in section 5-3, after the system restarts : 1. Press <DEL> to enter BIOS Setup during POST . 2. Insert the Windows installation CD into the optical drive.
5 90 5. After some les are copied to your system, the following picture appears, press <S> to continue the specic driver installation. 6. It will ask you to insert the RAID driver diskette into you oppy drive. Press <Enter> after it is done.
5 91 7. There are two drivers, for your 32-bit XP system, press [Enter] to select the rst driver - "AMD AHCI Compatible RAID Controller-x86 platform". 8. A conrmation message appears to double check if the driver is really what we wanted, press <Enter> to continue.
5 92 9. Windows will display the partition of your system. As we are using a Mirrored RAID array as an example, its size 232.88GB is now displayed as 238410MB. Y ou can press [C] to create partitions as many as you wish, assign them C:, D: or E: logical drive names.
5 93 5-5 Setting Up a Non-Bootable RAID Array This section assumes the following setup : ■ Boot Disk with Windows XP installed : One hard disk HDS728090PLA T20 (80GB) is connected to the IDE channel, and set to Master .
5 94 2. Select a RAID array for use (also can refer to section 5-3) After rebooting your computer , you will see the RAID software prompting you to press [Ctrl-F]. Press [Ctrl-F] to enter the FastBuild BIOS setup and congure the mirrored RAID array as described in the 5-3 section.
5 95 5. After the AMD RAID driver is installed, it will ask you to click "Finish" to restart your computer . 6. When Windows starts, a message is prompting you to reboot again.
5 96 7. After PC starts, the RAID array is now ready to be initialized under Windows. Launch Computer Management by clicking Start -> (Settings ->) Control Panel then open the Administrative T ools folder and double click on Computer Management.
5 97 1 1. The Computer Management window appears. The actual disks listed will depend on your system. In below gure, you can see there is a 232.82 GB unallocated partition.
5 98 17. The format of disk array (Disk1) is in processing. 18. Format completed, now you can start using your RAID array ..
Een belangrijk punt na aankoop van elk apparaat Foxconn A74ML-K (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Foxconn A74ML-K heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Foxconn A74ML-K vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Foxconn A74ML-K leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Foxconn A74ML-K krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Foxconn A74ML-K bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Foxconn A74ML-K kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Foxconn A74ML-K . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
