Gebruiksaanwijzing /service van het product H61MXV van de fabrikant Foxconn
Ga naar pagina of 112
H61MXV/H67MXV Series Motherboard User ’ s Manual.
Statement: This manual is the intellectual property of Foxconn, Inc. Although the information inthismanualmaybechangedormodiedatanytime,Foxconndoesnotobligate itself to inform the user of these changes.
Declaration of conformity HON HAI PRECISION INDUSTRY COMP ANY L TD 66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT , T AIPEI HSIEN, T AIW AN, R.O.C. declares that the product Motherboard H61MXV/H67M.
Declaration of conformity T rade Name: FOXCONN Model Name: H61MXV/H67MXV Responsible Party: PCE Industry Inc. Address: 458E.LambertRd. Fullerton,CA 92835 T elephone:.
Installation Precautions Please carefully read the following procedures to install your computer : ■ Itissuggestedtoselecthigh-quality ,certiedfansinordertoavoiddamagetothe motherboard and CPU due to high temperature.
T ABLE OF CONTENTS Chapter 1 Product Introduction ProductSpecications .............................................................................. 2 Layout....................................................................................
FOX LOGO ............................................................................................. 64 FOX DMI ................................................................................................ 65 Chapter 5 RAID Conguration RAIDCongurationIntroduction .
Thank you for buying Foxconn H61MXV/H67MXV Series mother- board. Foxconn products are engineered to maximize computing power , providing only what you need for break-through perfor - mance.
1 2 1-1 Product Specications CPU SupportLGA1 155socketIntel ® CPU,Maxprocessorpowerupto95W For the latest CPU information, please visit ： http://www .
1 3 Internal Connectors 2xSA T A 2.0connectors,2xSA T A 3.0connectors(H67MXV) 2xUSB2.0connectors(supporting4xUSBdevices) 1xCPUfanhe.
1 4 1-2 Layout Note : The above motherboard layout is for reference only , please refer to the physical motherboard for detail. 1.4-pin A TX12VPowerConnector 2.SYS_F AN1Header 3. PCI Express x16 Slot 4.ClearCMOSJumper 5.PCIExpressx1Slot 6.
1 5 1-3 Back Panel Connectors 1. PS/2 Mouse Port Usetheupperport(green)toconnectaPS/2mouse. 2. PS/2 Keyboard Port Usethelowerport(purple)toconnectaPS/2keyboard. 3. DVI-D Port TheDVI-DportsupportsDVI-Dspecication.
1 6 8. RJ-45 LAN Port The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate. Active LED Link LED LAN T ype Left: Active Right: Link Status Description Status Descriptio.
This chapter introduces the hardware installation process, includ- ing the installation of the CPU, memory , power supply , slots, pin headers and the mounting of jumpers.
2 8 2-1 Install the CPU and CPU Cooler Install the CPU Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Read the following guidelines before you begin to install the CPU : ■ MakesurethatthemotherboardsupportstheCPU.
2 9 Follow the steps to install the CPU onto the CPU socket : 2.LiftthemetalcoverontheCPU socket. 3. Remove protective socket cover . 5.WhenCPU isproperlyseated, re - place the metal cover and push the CPU socket lever back to its locked position.
2 10 Install the CPU Cooler Follow the steps below to correctly install the CPU cooler on the motherboard. 1. Apply and spread an even ther- mal grease on the surface of CPU.
2 1 1 2-2 Install the Memory Dual Channel Memory Conguration This motherboard provides two DDR3 memory sockets and supports Dual Channel T echnology .
2 12 Installing a Memory If you take a look at front side of memory module, it has asymmetric pin counts on both sides sepa- ratedbya notchinthemiddle,so itcanonlytin onedirection.Followthesteps belowtocorrectly install your memory modules into the sockets.
2 13 2-3 Install an Expansion Card Follow the steps below to correctly install your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card.
2 14 2-4 Install other Internal Connectors Power Connectors This motherboard uses an A TX power supply . In order not to damage any device, make sure all the devices have been installed properly before applying the power supply . 24-pin A TX Power Connector : PWR1 PWR1 is the A TX power supply connector.
2 15 Audio Connector : CD_IN CD_IN is a Sony standard audio connector, it can be connected to a CD/DVD-ROM drive through a CD/ DVD audio cable. Audio Connector : F_AUDIO The audio connector supports HD Audio standard. It provides the Front Audio output choice.
2 16 Front Panel Connector : FP1 This motherboard includes one connector for connecting the front panel switch and LED Indicators. Hard Disk LED Connector (HDD-LED) Connect to the chassis front panel IDE indicator LED. Itindicatestheactivestatusofthe harddisks.
2 17 TPM Connector : TPM The TPM (T rusted Platform Module) provides the ability to the PC to run applications more secure and to make transactions and communication more trustworthy . T o utilize this function, you should purchase additional device and install it.
2 18 2-5 Jumpers For some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the various functions of this motherboard by changing the jumper settings. Users should read the following content carefully prior to modifying any jumper setting.
2 19 Intel ® ME Jumper: PCH_ME_ENABLE This motherboard uses PCH_ME_ENABLE jumper to enable or disable Intel® Management Engine function. Intel® Management Engine (ME) is an embedded microcontroller located in Intel chipset. It provides latest IT management features such as Intel® AMT , that allows to improve management of corporate assets.
This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS param- eters are also provided. Y ou have to run the Setup Program when the following cases occur : 1. An error message appears on the screen during the system Power On Self T est (POST) process.
3 21 Enter BIOS Setup The BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintain optimal system performance.
3 22 Main ► System Date <weekday><month><date> <year> format. Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read Only). Month—monthfrom1to12. Date—date from 1 to 31. Y ear—year , set up by users.
3 23 [No Errors]: No error can result in system halt. [All, but keyboard]: All errors but keyboard can result in system halt. ► CPU Brand Name It displays the current CPU name. ► T otal Memory This item displays the total memory size. The size is depending on how many memory mod- ules are installed in your system before powering on.
3 24 Advanced ► T rusted Computing/CPU Conguration/Performance T uning/SA T A Conguration/Intel IGD SWSCI OpRegion /USB Conguration/Onboard Device Conguration Press <Enter> to go to relative submenu. T rusted Computing Ver sion 2.0 2.
3 25 device on the motherboard and set this item to [Enabled], then save changing and reset your computer , otherwise the operation system can not show the relative information. CPU Conguration Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 26 ► Package C State limit It is used to select the C-State mode. Performance T uning CPU Performance T uning Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 27 SA T A Conguration Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . SAT A Co nfig urat ion SAT A Mo de [ID E Mo de] SAT A Po rt1 Not Pre sent SAT A Po rt2 WDC WD1 600A AJS (16 0.
3 28 ► Spread Spectrum Clock Ifyouenabledthisfunction,itcansignicantlyreducetheEMI(ElectroMagneticInterference) generated by the system, so to comply with FCC regulation. But if overclocking is activated, you better disable it.
3 29 Onboard Device Conguration Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 30 Super IO Conguration Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 31 Chipset Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 32 ► VT -d This item is used to enable or disable the VT -d feature. Intel ® Virtualization T echnology for Directed I/O (VT -d) can help end users improve security and reliability of the systems and also improve performance of I/O devices in virtualized environment.
3 33 Intergrated Clock Chip Conguration Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Int egra ted Cloc k Ch ip C onfi gura tion ICC Ove rClo ckin g Li b Ve rsio n 7.
3 34 Boot Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 35 Power Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 36 Disabled: Normal ACPI function. ► Restore AC Power Loss This item is used to set which state the PC will take with when it resumes after an AC power loss.
3 37 Health Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 38 Security Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
3 39 Save & Exit Ver sion 2.0 2.12 05. Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc . Apt io S etup Uti lit y - Cop yrig ht ( C) 2 010 Amer ican Meg atre nds, Inc .
The utility CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features. This chapter includes the following information: ■.
4 41 Utility CD content This mothe rboard comes with one Ut ility CD. Y ou can simpl y put it in to you r CD/DVD-R OM dri ve, and the main menu will be displayed on your PC screen to guide you how to install. 1. Install Driver Use these options to install all the drivers for your system.
4 42 Install driver and utility This mothe rboard comes with o ne DVD, after installing the Operating System, you can sim ply put it int o your DVD-ROM drive, and the main menu will be displayed on your PC screen to guide you how to install. 1. Driver Usetheseoptionstoinstallallthedriversforyoursystem.
4 43 2. Utility Use these options to install additional software programs. And click “User ’s Manual“ button to view the product manual. Choose the items you want to Install (Windows 7) (Windows.
4 44 FOX ONE FOX ONE is a powerful utility for easily modifying system settings. It also allows users to monitor various temperature values, voltage values, frequencies and fan speeds at any time.
4 45 1. Main Page T oolbar Use the toolbar to navigate to other pages. Alert Lamp When the system is in healthy state, the color of alert lamp is green. When the system is in abnormal state, the alert lamp color is red. Switch Button Click this button, it will simplify the whole FOX ONE control panel to a smaller information bar (i.
4 46 Skin Button There are more choices of FOX ONE screen panels. Click this button, you can select your favorite skin (FOX ONE Panel). Exit Click this button to exit the program. Minimum Click this button to drop the FOX ONE to Windows system tray located at the lower right corner of your screen.
4 47 Conguration Thismenuallowsyoutocongure: 1). Monitor interval (ms) : Thisistodenetheintervalofdifferentmessagesofsystemsettingswhichareto be displayed on Simple Mode screen. Minimum value is 1 second.
4 48 Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Y es. Step2: Afterdataiscollected,itwillaskyoutorestartyourcomputernow . Later on, when the FOX ONE program is activated, and F .
4 49 2. CPU Page - CPU Control This page lets you select (or overclock) CPU clock to meet the current performance level of the system. The fastest and suitable CPU clock running for current system can be calculated by FOX ONE automatically or manually input by yourselves.
4 50 Y ou can see the system is raising CPU clock until the system hangs. Push RESET button on the front panel of your system to restart the computer . Run FOX ONE program again, it will inform you the previous test found that255MHzisthe recommended CPU clock for your system.
4 51 FOX Intelligent Stepping (F .I.S., Optional) Select FOX Intelligent Stepping will allow your system to automatically adjust your CPU clock rate based on different system loadings. For example, if you select Power Gaming, CPU clock will be driven to run at its maximum speed.
4 52 4. Limit Setting 4.1 Limit Setting - CPU T emperature This page lets you to set CPU high limit temperature and enable the alert function. 4.2 Limit Setting - System T emperature This page lets you to set system high limit temperature and enable the alert function.
4 53 4.3 Limit Setting - CPU Fan This page lets you to set CPU fan low limit rpm and enable the alert function. 4.4 Limit Setting - System Fan This page lets you to set system fan low limit rpm and enable the alert function.
4 54 4.5 Limit Setting - F AN1 Fan This page lets you to set F AN1 fan low limit rpm and enable the alert function. 5. V oltage Page - V oltage Control (Optional) This page lets you set CPU voltage, memory voltage and North Bridge voltage manually .CPUvoltagecanbesteppedup/downbyaunitof12.
4 55 6. Fan Page - Fan Control This page lets you enable Smart Fan function or set the fan speed by manual. WhenSmartFanisselected,youmustusea4-pinCPUcoolerinyoursystem.
4 56 FOX LiveUpdate FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by local or online. Supporting Operating Systems : ■Window.
4 57 1-2 Local Update - Backup ThispagecanbackupyoursystemBIOS.Y oucanclick“Backup”,andkeyinalename,then click“Save”tonishthebackupoperation.Theextensionofthisbackupleis".
4 58 2. Online Update 2-1 Online Update - Update BIOS This page lets you update your system BIOS from Internet. Click “start”, it will search the new BIOSfromInternet.Thenfollowthewizardtonishtheupdateoperation.
4 59 2-3 Online Update - Update Utility This page lets you update utilities from Internet. Click “start”, it will search the new utilities from Internet.
4 60 2-4 Online Update - Update All This page lets you update your system drivers from Internet. Click “start”, it will search all new BIOS/drivers/utilitiesfromInternet.Thenfollowthewizardtonishtheupdateoperation.
4 61 3. Congure 3-1 Congure - option This page lets you set auto search options. After you enable the auto search function, FOX LiveUpdatewillstartitssearchingfromInternetandifanyqualieditemfound,itwillpopouta message on the task bar to inform you to do the next step.
4 62 Whenyouenable"AutoSearchFOXLiveUpdate",ifyourFOXLiveUpdateversionisolder ,itwill auto search from internet and prompt you to install the new version.
4 63 3-3 Congure - Advance ThispageletsyouselecttoashBIOS/BootBlockandclearCMOS.IfyouchooseFlashBoot Block,itmeansBIOSisnotprotective,andyoumustmakesuretheashprocessiscontinuous and without any interruption.
4 64 FOX LOGO FOX LOGO is a simple and useful utility to backup, change and delete the boot time Logo. The boot Logo is the image that appears on screen during POST (Power-On Self-T est). Y oucanprepareaJPGimage(1024x768)le,thenuseFOXLOGOtoopenitand change the boot time Logo.
4 65 FOX DMI FOX DMI is a full Desktop Management Interface viewer , and it provides three DMI data formats : Report, Data Fields and Memory Dump. With DMI information, system maker can easily analyze and troubleshoot your mother- board if there is any problem occurred.
This chapter will include the following information : ■RAIDCongurationIntroduction ■Intel ® Matrix Storage Manager ■Creat.
5 67 Installing a new Windows XP (Vista) in a brand new RAID system. 1.Follow5-1tocreateaRAIDdriverdiskette. (Windows Vista has in-box driver by its own and can skip this step). 2.Follow5-2tosetBIOSsetting"SA T A Mode"toRAIDor AHCI.
5 68 RAID Conguration Introduction RAID (Redundant Array of Independent Disks) is a method for computer data storage schemes that divide and/or replicate data among multiple hard drives. RAID can be designed to provide increased data reliability (fault tolerance) or increased I/O (input/output) performance, or both.
5 69 RAID 0 (Stripe) RAID 0 reads and writes sectors of data interleaved among multiple drives. If any disk member fails, it affects the entire array . The disk array data capacity is equal to the number of drive members times the capacity of the smallest member .
5 70 Intel ® Matrix Storage Manager The Intel ® MatrixStorageManagertechnologysupportsRAID0,RAID1,RAID5,and RAID 10 (0+1) functions. It allows you to get high performance with fault tolerance, big capacity , or data safety provided by different RAID functions.
5 71 1.FindaPC,putadisketteintoitsoppy drive A:, this diskette will be formatted later . Put the driver CD into DVD-ROM drive. 2.Dependingonwhichplatformyoursystem is,normally ,itisa32-bitXPsystem.
5 72 RAID driver into this diskette. 9.Checkifthediskettecontainsthedriverles. Later , when in the process of installing Windows XP in your RAID system, it will ask you to use this oppydiskette to provide driver for additional specic devices, for example, a RAID device.
5 73 5-2 BIOS Conguration 1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self T est). 2.Usethearrowright/leftkeystoselectthe“Advanced ” .
5 74 Create RAID V olume Create RAID 0 (1st V olume) 1. Select “ 1. Create RAID V olume ” from the menu and press <Enter>. The menu appears : 2. In " Name " item, you can input a device name for the RAID0 system and press <Enter> to apply it.
5 75 4. It then goesto “ Disks ” item. Press <Enter> to display the hard disks list for this RAID0 system. 5.Fromtheharddrivelist,use UporDownarrowkeytoreachthehard disksyouwant to combine them as RAID0, then press <Space> key to select them.
5 76 6. It is now entering “ Strip Size ” menu. Use Up or Down arrow key to select the desired stripsize. Theavailable values rangefrom 4KB to128KB.The strip valueshould be selected based on different applications.
5 77 8. In “ Create V olume ” item, press <Enter>. A warning message will appear : 9. Press <Y>to create thevolume and returnto themain menu, a150GB RAID0 system isnormallycongured.
5 78 Create RAID0 (2nd V olume) 1. Select “ 1. Create RAID V olume ” from the menu and press <Enter>. The menu appears : 2.In" Name "item,wenameitasT ryRAID0-1forsecondvolume. 3. In “ RAID Level ” item, you can use Up or Down arrow key to make a selection, only RAID0, 1 can be selected.
5 79 4. It then goesto “ Disks ” item. Press <Enter> to display the hard disks list for this RAID0 second volume system. 5.Fromtheharddisk list,selectthepreviouslyconguredRAID0harddisks, andpress <Space> key to select them.
5 80 6. It goes to “ Strip Size ”menudirectly .Capacityautomaticallydisplays148.1GB,and at this time, you can not input any value in capacity as there is no additional volume available. TheavailablevaluesofStripSizerangefrom4KBto128KB.
5 81 A message will appear : Press <Y> to create the volume and return to the main menu. T wo RAID0 volumes werecongured. Are you sure you want to create this volume ? (Y/N) : Intel(R)MatrixStorageManageroptionROMv5.
5 82 Create RAID 1 1. Select “ 1.Create RAID V olume ” from the main menu and press <Enter>. 2.In" Name "item,youcaninputadevicenamefortheRAID1systemandpress <Enter> to apply it.
5 83 4.Itthengoesto“ Disks ” item. Press <Enter> to dispaly the hard disks list for this RAID1 system. 5.Fromtheharddrivelist,useUporDownarrowkeytoreachtheharddisksyouwant to combine them as RAID1, then press <Space> key to select them.
5 84 6. It will skip “ Strip Size ” menu for RAID1. 7. In “ Capacity ” item, use the default value, and press <Enter>. The size of the smaller harddisk74.5GBisbecomingthedefaultvalue,anditindicatesthemaximum capacity .
5 85 Create RAID 10 (0+1) 1. Select “ 1.Create RAID V olume ” from the main menu and press <Enter>. 2.In" Name "item,youcaninputadevicenamefortheRAID10systemandpress <Enter> to apply it.
5 86 4. Afterexitingfrom" RAID Level ",itgoesdirectlyto" Stripe Size "item.Becauseall four disks are selected for RAID10, so there is no need to go to Disks option.
5 87 Create RAID5 (Parity) 1. Select “ 1.Create RAID V olume ” from the main menu and press <Enter>. 2.In" Name "item,youcaninputadevicenamefortheRAID5systemandpress <Enter>toapplyit.
5 88 4.Itthengoesto“ Disks ” item. Press <Enter> to display the hard disks list for this RAID5system. 5.Fromtheharddrivelist,useUporDownarr.
5 89 6. Use Up or Down arrow key to select the desired strip size when entering “ Strip Size ”menu.Thedefaultvalueis64K.Press<Enter>. 7. In “ Capacity ” item, use the default value, and press <Enter>. The default value is twicethatofthesmallestharddisksize,thatis,74.
5 90 Create Recovery 1. Select “ 1.Create RAID V olume ” from the main menu and press <Enter>. 2. In" Name "item,youcaninputadevicenamefortheRecoverysystemandpress <Enter> to apply it.
5 91 4.Itthengoesto“ Disks ” item. Press <Enter> to display the hard disks list for this Recovery system. 5.Fromtheharddrivelist,useUporDownarrow.
5 92 6. It will skip “Strip size” and “Capacity” items. The default “ Capacity ” value is the smallerharddisksize,thatis74.5GB.In“Sync”item,wesuggestyouselectthe “Continuous” value and press <Enter>.
5 93 Delete RAID V olume 1.T ake TryRAID5forexample.Select“ 2. Delete RAID V olume ” in main menu and press <Enter>. 2.UseUporDownarrowkeytoselecttheRAIDsetyouwanttodelete.Hereonlyone RAID5isseen,sopress<DEL>keytocontinue.
5 94 3. After <DEL> key is pressed, the screen appears as below: Press<Y>keytoconrmthevolumedeletion. 4.ReturntoMainMenu.
5 95 Reset Disks to Non-RAID Reset RAID volume allows you to replace a failed disk with a new one, and the operating system will rebuild the data later . For RAID0, reset a hard disk would totally crashthesystem,butforRAID1,RAID10andRAID5,theyallcanberebuilt.
5 96 3. Select Hitachi hard disk as the one to be reset. Press <Enter>. A double conrmationmessagepopsout,press<Y>toconrm. 4.ItgoesbacktoMainmenuwitha"Failed"statusofRAID0volume.
5 97 Example 2. Reset a RAID5 system 1. A T ryRAID5volumewasbuiltwiththreeharddisks,wewanttoresetoneofthem. Select “ 3. Reset Disks to Non-RAID ” in main menu and press <Enter>. 2. A warningmessageisdisplayed.
5 98 4. A " DEGRADED VOLUME DETECTED "screenpopsoutaskingyoutoselectanew harddiskforrebuilding.Here,weselectST74.5GB.Press<Enter>toselectit. 5.ItgoesbacktoMainmenuwitha"Rebuild"statusofRAID5volume.
5 99 Recovery V olume Options 1. “Recovery V olume Options” is only available when “Recovery” is built. Here, we take T ryRecovery as an example, select “ 4. Recovery V olume Options ” in main menu and press <Enter>. The screen displays: 2.
5 100 4.Press<Space>keytoselectitandpress<Enter>,itreturnstothemainmenu.Y ou canseethe74.5GBdiskisofine,andactionsofRecoverychangefromContious Update mode to On-Request.
5 101 Exit RAID BIOS 1.T ake TryRAID5asanexample,select“ 5. Exit ” in main menu and press <Enter>. The screen displays : 2.Press<Y>toexitIntel ® Matrix Storage Manager program. The system will enter BIOS setup.
5 102 5-4 Install a New Windows XP 1. Press <DEL> to enter BIOS Setup during POST . 2.InserttheWindowsinstallationCDintotheopticaldrive. 3. Set the “Boot Option #1” to “SA T A: A T API DVD ...”, save changes and exit the BIOS setup.
5 103 5.Aftersomelesarecopiedtoyoursystem,thefollowingpictureappears,press<S> tocontinuethespecicdriverinstallation. 6.ItwillaskyoutoinserttheRAIDdriverdisketteintoyouoppydrive.
5 104 7. Depending on South Bridge chip of your system, select appropriate driver for it. Here, we choose Intel ® ICH8R/ICH9R/ICH10R/D0/PCH SA T A RAID Controller . Press <Enter> to select it. 8. Aconrmationmessagepopsouttodoublecheckifthedriverisreallywhatwe wanted.
5 105 9. Windows will display the partition of your system, you have to create partitions as many as you wish, assign them C:, D: or E: drive names. After partitions were done, you can press <Enter> to continue. It will ask you to format your hard disk, then copyles.
Een belangrijk punt na aankoop van elk apparaat Foxconn H61MXV (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Foxconn H61MXV heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Foxconn H61MXV vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Foxconn H61MXV leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Foxconn H61MXV krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Foxconn H61MXV bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Foxconn H61MXV kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Foxconn H61MXV . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
