Gebruiksaanwijzing /service van het product FINEPIX XP20 BLO1299-200 van de fabrikant FujiFilm
Ga naar pagina of 124
FW:FiLm DIGITAL CAMERA FINEPIX XP20 Series Owner's Manual Thank you for your purchase of this product. This manual describes how to use your FUJIFILM digital camera and the supplied software. Be sure that you have read and understood its contents and the warnings in "ForYour Safety"(_ ii) before us- ing the camera.
For Your Safety [ IMPORTANT SAFETY INSTRUCTIONS ] • Readlnstructions: All the safety and operat ing instructions should be read before the appliance is operated.
Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage sur.
......... , { Safety Notes ] • Make sure that you use your calrera correctly Read these safety notes and your Ovvnel'_ Monuol carefully before use • After reading these safety notes, store th.
:o" ,: :y Do not usethe charqer to charqe batteries other than those sped- batteries can cause the battery to leak fluid, overheat or burst When cerrvinq the batterv, instell it in a diqital camera or heep it in the hard case. When storim terminals with insulation tope.
......... , { The Battery and Power Supply ] your camera and read the appropriate sections. The following describes the proper use of batteries and how to prolong their life. Incor rect use can shorten batlery life or cause leak age, overheating,fire, or explosion Read this section if your camera uses a rechargeable Li-ion battery.
J • Do not mix old and new batteries, batteries with different charge levels, or batteries of different types • If the camera will not be used for an extend ed period, remove the batteries Note that the calr'era clock will be reset • Tile batteries may be warm to the touch immediately after use.
......... , { Using the Camera ] Do not aim the camera at extremely bright light sources, such as the sun in a cloudless sky. Failure to observe this precaution could damage the camera image sensor Be.
_About This Manual Before using the camera, read this manual and the warnings in "For Your Safe- ty"(_ ii). For information on specific topics, consult the sources below.
_quently-Used Buttons -I_ To return instantly to shooting mode, press the shutter button halfway. Shoot the Camera on in PlaybackMode -k When the camera is off, playback can be started by pressing the [] button for about a second. • Silent Mode -I_ Press and hold the DISP/ BACK button to disable camera lights and sounds.
Product Features and Precautions for Use • Water, Dust, and Shock Resistance ']) The camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68) dust resistance standards, and has passed FUJlFILM drop tests (drop height: 1.5 m/4.9 ft.
_>_x}(:it_ct _@u_Lires _(i _ec_tio_s _o_ Use • After Use ']) Remove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign mat- ter could damage the seal, lowering water resistance.
_Table of Contents For Your Safety .................................................................. ii IMPORTANT SAFETY INSTRUCTIONS .................................. ii SafetyNotes ..................................................................
More on Playback Playback Options ............................................................. 37 * Favorites: Rating Pictures ......................................... 37 Playback Zoom ............................................................... 38 Multi-FramePlayback .
of Ccn_e ts Using the Menus: Playback Mode .................................. 67 Using the Playback Menu............................................... 67 Playback MenuOptions .................................................. 67 [] PHOTOBOOK ASSIST .
Technical Notes Optional Accessories ....................................................... 84 Accessories from FUJl F I LM .............................................. 85 Caring for the Camera ..................................................... 86 Storage and Use .
_ymbols and Conventions The following symbols are used in this manual: (D :This information should be read before use to ensure correct operation. _, :Additional information that may be helpful when using the camera. _: Other pages in this manual on which related information may be found.
Parts of the Camera For more information, refer to the page listed to the right of each item. Plh _;h h ( Selector button Move cursor up [] (exposure compensation) button (32) (delete) button (_ x) ] Move cursor left Move cursor right I (macro) button (_ 33) ,_ (flash) button (_ :34) I I Move cursor down 1 @ (self-timer) button (36) / .
Zoom control........................................................... 20, 38 Shutter button .............................................................. 21 _ ON/OFF button ............................................................. 16 Flash ....
_a_ts of ti_e Came_ Camera Displays The following types of indicator may be displayed during shooting and play- back. Indicators vary with camera settings. • Shooting / °1 o0 : .._1 r _+_ ] Fi AF _'' _i1_12/31/2050 10;00 AM _[ 250 F4.S []-1_ ¢ Shooting mode .
• Playback 1 _.) s |12/31/2050 10:00 AM 1 / 250 F4.5 []-1 Playback modeindicator .......................................... 23, 37 Intelligent Face Detection indicator ......................... 29, 71 Red-eye removal indicator ......................
_ H d ng andV ew ng nd cators Press DISP/BACK to cycle through shooting and playback indicators as follows: • Shooting: Indicators displayed/indicators hidden/best framing Playbad(: Indicators displ.
_ging the Battery The battery is not charged at shipment. Charge the battery before use. 1 Place the battery in the supplied battery charger. Insert the battery in the orientation 8otter indicated by the (-I-} ¢(--} labels: v Tile camera uses an NP-45A recharge- €,¢(-_ able battery, lobe/ _:' 2 Plug the charger in.
t_ iS_tt y 3 Charge the battery, Remove the battery when charging is complete. See the specifications (_ 106) for charging times (note that charging times increase at low tem- peratures).
_lnsertinq the Battery and a Memory Card Although the camera can store pictures in internal memory, optional SD, SDHC, and SDXC memory cards (sold separately) can be used to store addi- tional pictures. After charging the battery, insert the battery and memory card as described below.
2 Insert the battery. Insert the battery with the terminal first and in the orientation shown by the label inside the battery chamber, keeping the battery latch pressed to one side. Confirm that the battery is securely latched. (!_ Insert the battery in the correct orientation.
3 Insert the memory card. Holding the memory card in the orientation shown at right, slide it in until it clicks into place at the back of the slot. (l> Be sure card is in the correct orientation; do not insert at an angle or use force.
4 Close the battery-chamber cover. Before closing the cover, check to confirm that there is no dust, sand, or other foreign matter on the water-resistant seal or adja- cent surfaces. Confirming That the Cover Is Latched iii • Confirm that tile battery-chamber or connector cover does not protrude from the camera body.
ir_<_ _ ti _ t _;_ i:_1b;_If _ "_ _ _'_¢_i_f (a_i_i ®® Removing theBattery and Memory Card Before removing the battery or memory card, turn thecamera offand press the latch to open the battery-chamber cover. To remove the battery, press the battery latch to the side, and Bottery/otch slide the battery out of the camera as shown.
• Compatible Memory (ards FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap- proved for use in the camera. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digitol_comeros/compotibility/. Operation is not guaranteed with other cards.
!_se_t # itleBx_t y :_i_Se_o_yCad • Tile data in internal memory may be erased or corrupted when the camera is re- paired. Please note that tile repairer will be able to view pictures in internal memory. • Formatting a memory card or internal memory in tile camera creates a folder in which pictures are stored.
_g the Camera on and Off ShootingMode Press the ON/OFF button to turn the camera on. Press ON/OFF again to turn the camera off. _, Switching to PlaybackMode Press the [] button to start playback. Press tile shutter button halfway to return to shooting mode.
T_!!_!_gtieCa! ea<t _ d(}_ (!:> Fingerprints and other marks on the protective glass covering the lens carl affect pictures. Keep tile glass clean.
Basic Setup A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as described below (you can reset the clock or change languages at any time using the [] DATE/TIME or [] _J_/LANG. options in the setup menu; for information on displaying the setup menu, see page 77).
_g Pictures in _r_ (Scene Recoqnition) Mode This section describes how to take pictures in r_ (scene recognition) mode. The camera automatically analyzes the composition and adjusts settings ap- propriately. 1 Turn the camera on, Press the ON/OFF button to turn the camera on.
2 Frame the picture. Use the zoom control to frame the picture in the display. Zoom out Zoom in QT wQ ®_ Holding theCamera Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands carl blur your shots.
3 Focus. Press the shutter button halfway to focus. The lens may make a noise when the camera focuses; this is normal. If the camera is able to focus, it will beep twice and the in- dicator lamp will glow green. If the camera is unable to focus, the focus frame will turn red, !AF will be dis- played, and the indicator lamp will blink green.
d;!;i_ x 4 Shoot. Smoothly press the shutter button the rest of the way down to take the picture. If the subject is poorly lit, the flash may fire when the pic- ture is taken. For information on using tile flash when lighting is poor, see "$ Using tile Flash (Intelligent Flash)" (_ 34).
_Viewing Pictures Pictures can be viewed in the LCD monitor. When taking important photo- graphs, take a test shot and check the results. 1 Press the [] button, The most recent picture will be displayed. 2 View additional pictures, Press the selector right to view pictures in the order recorded, left to view pictures in reverse order.
_Shooting. Mode Choose a shooting mode according to the scene or type of subject. Choosin.g o Shooting Mode 1 Press MENU/OK to display the shooting menu. 2 Highlight [] SHOOTING MODE and press the selector right to display shooting mode options. 3 Highlight the desired mode and press MENU/0K 4 Press DISP/BACK to exit to shooting mode.
S_oo _gL;_d< Shooting ModeOptions Mode Description The camera automatically analyzes the composition and selects a scene ,_ SCENE RECOGNITION according to shooting conditions and tile type of subject. Choose for crisp, clear snapshots. This mode is recommended in most I_1 AUTO situations.
Mode 4_ UNDERWATER UNDERWATER (WIDE) _o¢ UNDERWATER (MACRO) _i" PARTY -_ FLOWER TEXT Description For underwater shooting (effective in movies). Choose for wide-angle underwater shots that include more of the back- ground behind the main subject.
• 1_ MOTION PANORAMA In this mode, you can take up to three pictures and join them together to form a panorama. Use of a tripod is recommended to assist in composing overlapping shots. 1 Press the selector up to select a frame. Press the selector left or right to highlight a pan direction and press MENU/OK 2 Take a photograph.
4 Take the last shot as described in Step 3. _, To end shooting and create a panorama after the first or second shot, press tile multi selector up after completing Step 2 or Step 3 and proceed to Step 5. 5 Press MENU/OK to save the picture. (l> Panoramas are created from multiple frames.
[] Intelligent Face Detection Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits.
_Focus Lock To compose photographs with off-center subjects: 1 Focus: Position the subject in the focus frame (E[+]_) and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock).
_OCL_S LOCi( Although the camera boasts a high-precision autofocus system, it may be unable to focus or] the sub]ects listed below. If the camera is unable to focus, focus or] another subject at the same distance and use focus lock to recompose the photograph.
Exposure Compensation To adjust exposure compensation when photo- graphing very bright, very dark, or high-contrast subjects, press the selector up ([]).
_ Macro Mode (Close-ups) For close-ups, press the selector left (_) and select _. When macro mode is in effect, the camera fo- cuses on subjects near the center of the frame.
_g the Flash (Intelligent Flash) When the flash is used, the camera's Intelligent Flash system instantly analyzes the scene based on such factors as the brightness of the subject, its position in the frame, and its distance from the camera.
If the flash will fire, [] will be displayed when the shutter button is pressed halfway. At slow shutter speeds, t"" will appear in the display to warn that pictures may be blurred; use of a tripod is recommended. The flash may fire several times with each shot.
Q Using the Self-Timer To use the self-timer, press the selector down (_) and choose from the following options: Option Description (OFF) Self-timer off. The camera starts the timer when it detects two portrait subjects close together. Press the selector up to choose how close the subjects must be together before d.
_yback Options To view the most recent picture in the LCDmonitor, pressthe [] button. Press the selector right to view pictures in the order recorded, left to view pictures in reverse order. Keep the selector pressed to scroll rapidly to the desired frame.
i>i_i_yi:>_(k Oi:::4ior_s Play, back Zoom Select T to zoom in on pictures displayed in single-frame playback; select W to zoom out. When the picture is zoomed in, the selector can be used to view areas of the image not currently visible in the display.
Multi-Frame Playback Selecting W when a picture is shown full-frame in the LCD monitor displays the current image with previous and following images in the background. Select W to increase the number of images displayed to two, nine, or one hundred, T to view fewer images.
[] Deletinq Pictures To delete individual pictures, multiple selected __ pictures, or all pictures, press MENU/OK, select [] ERASE (_ 67), and choose from the options be- low. Note that deleted pictures can not be recov- ered. Copy important pictures to a computer or other storage device before proceeding.
[] Image Search Search for pictures. I Select [] IMAGE SEARCH in the playback menu (_ 67), highlight one of the following search criteria, and press MENU/OK: • BY DATE: Search by date. • BY FACE: Search for faces from the face recognition database.
[] PhotoBook Assist Create books from your favorite photos. Creating a PhotoBook 1 Select NEW BOOK for [] PHOTOBOOK ASSIST in the playback menu (_ 67) and choose from the following options: • SELECT FROMALL: Choose from all available pictures. • SELECT BYIMAGE SEARCH: Choose from pictures matching selected search conditions (_ 41).
Viewing, Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the selector left or right to scroll through the pictures.
_Viewing Panoramas If you press the selector down when a panorama is displayed full frame, the camera will play back the picture from left to right. To pause playback, press the selector down; press the selector down again to resume. To exit to full- frame playback, press the selector up while panorama playback is in progress.
Recordinq Movies Press (o; to shoot a movie. During recording, REC and the time remaining will be displayed in the LCD monitor and sound will be recorded via the built-in microphone (be careful not to cover the microphone during recording). Time ovoilob/e is disployed in monitor To end recording, press the _o) button again.
_ ,::<>_c!_g Moves (J> The indicator lamp lights while movies are beirlg recorded. Do not open the bat- tery chamber during shooting or while the indicator lamp is lit. Failure to observe this precaution could prevent tile movie from being played back.
_Viewing. Movies During playback, movies are displayed in the LCD monitor as shown at right. The following operations can be per- formed while a movie is displayed: Option Description Start/pause Press the selector down to start playback. Press again to playback )ause.
_Viewing Pictures on TV Connect the camera to a TV to show pictures to a group. 1 Turn the camera offand connect an optional A/V cable as shown below. Insert into Connect ye//ow p/ug to USB mUd-connec.
_Printing Pictures via USB If the printer supports PictBridge, the camera can be connected ,_f directly to the printer as shown below and pictures can be printed rJ without first being copied to a computer. Note that depending on PiclBridge the printer, not all the functions described below may be supported.
!ki_gPct _esv_ 6 Press MENU/OK to start printing. Printing can be interrupted by pressing DISP/I_ACK, but note that some printers may not respond immediately.
Printing.the DPOF Print Order The [] PRINT ORDER (DPOF) option in the playback menu can be used to create a digital "print order"for PictBridge-compatible printers (_ 84) or de- vices that s.
F'c_esv_ sSF: S Press the selector up or down to choose the number of copies (up to 99). To remove a picture from the print order, press the selector down until the number of copies is zero. 6 Repeat Steps 4-5 to complete the print order and press MENU/OI( when settings are complete.
_Viewing Pictures on a Computer The supplied software can be used to copy pictures to a computer, where they can be stored, viewed, organized, and printed. Before proceeding, install the software as described below. Do NOT connect the camera to the computer until instaflation is complete.
/ "< ) 3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive. Windows 7/Windows Vista ii If an AutoPlay dialog is displayed, click SETUP.
Mocintosh: Instollin.g, FinePixViewer 1 Confirm that the computer meets the following system requirements: CPU PowerPC or Intel OS Pre-installed copies of Mac OS X version 103.
Vew!_gF'c_ _es(_ aC(_ _p_te 4 Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry location out of direct sun- light in case you need to re-install the software.
Connectin.g. the Camera 1 If the pictures you wish to copy are stored on a memory card, insert the card into the camera. _, Windows users may require the Windows CD when starting the software for the first time. ¢!) Loss of power during transfer could result in loss of data or damage to internal memory or tile memory card.
Vew!_gFc_esc! a<o @_te For more information on using the supplied software, start the application and select the appropriate option from the Help menu. (J> If a memory card corltairling a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images.
_m D sconnect ng theCamera After confirming that the indicator lamp is out, follow the on-screen instructions to _ Un nsta ng the Supp ed Software iii Only uninstall the supplied software when it is no longer required or before begin- ning reinstallation.
_g the Menus: Shooting. Mode Using the Shooting Menu To display the shooting menu, press MENU/OK in shooting mode. Highlight items and press the se- lector right to view options, then highlight an op- tion and press MENU/OK Press DISP/BACK to exit when settings are complete.
M_ : Mx: Control the camera's sensitivity to light. Higher values can reduce blur; note, however, that mot- tling may appear in pictures taken at high sensitivities. 1 O0 I ISO I 3200 Bright _- Scene --, Dark Less noticeable _ Noise (mottling) --.
Choose the image size and aspect ratio at which pictures are record- I1_ 4:3 ed. Large pictures can be printed at large sizes with no drop in quality, l___--"T' while small pictures require less memory, allowing more pictures to be Size Aspect ratio recorded.
U_ing the Men_i_: Shooting Mode Choose how much image files are compressed. Option I Description FINE Low compression. Select for higher image quality. NORMAL High compression. Select this option to store more pictures. Enhance contrast and color saturation or take pictures in black and white.
U_ing the _em_: Si_ooting Mode For natural colors, choose a setting that matches the light source. Option Description AUTO White balance adjusted automatically. -;÷:- For subjects in direct sunlight. _'.'_ For subjects in the shade. Use under"dayJight'fluorescent lights.
U_ing tile Menu_: Shooting Mocie Capture motion in a series of pictures. Option Description ON Tile camera takes up to 3 pictures while the shutter button is pressed. OFF One photograph is taken each time the shutter button is pressed. _, Focus and exposure are determined by the first frame in each series.
This option controls how the camera selects the focus area. Regardless of the option selected, the camera will focus on the subject in the center of the LCD monitor when macro mode is on. Option I Description [] CENTER Tile camera focuses on the subject in tile center of the frame.
_g. the Menus: Playback Mode Using the Play.buck Menu To display the playback menu/press MENU/OK in play- back mode. Highlight items and press the selector right to view options/then highlight an option and press MENU/OK Press DISP/BACK to exit when settings are complete.
i J!_ir_c_ the i_eF_<_s; [>iayb_/<ik i_o<:!e Create a retouched copy of the current picture. 1 Display the desired picture. 2 Select I_ EDIT in the playback menu and choose from the following options: Option Description CROP Crop the copy.
_s g the i_ Se!_ _s: Pay _i:<k f4od_ Select pictures for upload toYouTube or Facebook using MyFinePix Studio (Windows only). • Selecting Pictures for Upload 1 Select YouTube to choose movies for upload toYouTube, FACEBOOK to choose photos and movies for upload to Facebool<.
t_e i_Se_ _s: P _yba< k i_sod View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press DISP/BACR at any time during the show to view on-screen help.
;s g t e J";e _s::>aybackf';cde If the current picture is marked with a _] icon to indicate that it was taken with intelligent Face Detection, this option can be used to remove red-eye. The camera will analyze the image; if red- eye is detected, the image will be processed to create a copy with reduced red-eye.
£s_g ie _Se_ _s: iJ ayb;_<:< i_sode Create a cropped copy of the current picture. 1 Display the desired picture. 2 Select [] CROP in the playback menu. 3 Use the zoom control to zoom in and out and use the selector to scroll the picture until the desired portion is displayed.
U_i_g _he _e_u_: _i_yb_:k Mode Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD monitor. 1 Display the desired picture. 2 Select [] IMAGE ROTATE in the playback menu. 3 Press the selector down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclock- wise.
i_;_Arw:i ti'e _A_ :,¸ ,' _ _ _ k_ _ _ A _ I_ l :Sllla (Idaui_s Io OEE), Choose the transition between images during playback. Option I Description WIPE IChoose for a wipe transition between images. SLIDE-IN J lmages slide into the display.
_s gt_ Me s:PaybackMode Add existing footage to the end of the current movie to create an edited copy. 1 Display the desired movie. 2 Select [] MOVIE JOIN in the playback menu.
_The Setup Menu llsing the Setup. Menu 1 Display the setup menu. 1.1 Press MENU/OK to display the menu for the cur- rent mode. 1.2 Press the selector left to highlight the tab for the current menu. 1.3 Press the selector down to highlight "_ SET.
Setup MenuOptions Setthe camera clock (18). I e S_t_p Switch the camera clock instantly from your home time zone to the local time at your destina- tion when traveling. To specify the difference between local time and your home time zone: 1 Highlight _,_ LOCAL and press the selector right.
Ti_e _et_p _em_ Reset all settings except [] DATE/TIME, [] TIME DIFFERENCE, and 1_ VIDEO SYSTEM to de- fault values. 1 Highlight [] RESET and press the selector right to display a confirmation dialog. 2 Highlight OK and press MENU/0K If a memory card is inserted in the camera, this option will format the memory card.
New pictures are stored in image files named using a four-digit file Fromenumber number assigned by adding one to the last file number used. The file I %o-looo_ '] number is displayed during playback as shown at right.
The Set_p Men_ Adjust the volume of the sounds produced when camera controls are operated. Choose ,qOFF (mute) to disable control sounds. Adjust the volume of the sounds produced when the shutter is released. Choose ,|OFF (mute) to disable the shutter sound.
'e_p Choose whether the display automatically dims to save power in shooting mode. This option does not take effect during playback. Option Description The display dims to save power if no operations are performed for a few [] POWER SAVE ON seconds.
Th_!_ _etup _er_u If ON is selected, selecting T at the maximum optical zoom position will trigger digital zoom, further magnifying the image. TheZoom Indicator ii; DIGITAL ZOOM on DIGITAL ZOOM w T I( )1_ _1 Optico/ zoom Digito/ zoom w T I( )1 Optico/zoom ill l; Digital zoom produces lower quality images than optical zoom.
]iqe Sd:b_ p Me_q _ Choose a video mode for connection to a TV. SECAM is not supported. Option Description Select this mode for connection to video devices in North America, the Carib- NTSC bean, parts of Latin America, and some East Asian countries.
_ptional Accessories The camera supports a wide range of accessories from FUJlFILM and other manufacturers. • Printing __ FINEPIX XP20 Series •Audi°/Visual ?_ AN cable (optional) USB cable ( (supplied) PictBridge-compotib/e I • Computer Related USB cable (supplied) [ I SD card slot or card reader [ C°mp uter_ [ Available separately.
Op _} Accessories from FUJIFILM The following optional accessories are available from FUJIFILM. For the lat- est information on the accessories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/producs/digitol_ comeros/index.
_g for the Camera To ensure continued enjoyment of the product, observe the following pre- cautions. Storage and Use If the camera will not be used for an extended period, remove the battery and memory card.
Cleaning_ Use a blower to remove dust from the protective glass covering the lens and LCD monitor, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJlFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied.
_Problems and Solutions Water in the Camera Problem Solution I The battery-chamber cover was not fully closed beforethe camera was immersed, or was opened Waterin the camera under water: Take the came.
i_ ¸Qi_i_ _ _c_i l!_c_i_ic_ Problem Solution Charging doesnot start, IReinsertthe battery in the correct orientationand make sure that the charger is plugged in (7), Charging is slow, lChargethe battery at room temperature (vi), The charging lamplights, I" There is dirt on the batteryterminals: Clean the terminals with a soft, dry cloth.
Problem Solution The camera doesnot The subjectis close to the camera: Select macro mode(33), focus. The subject is far away from the camera: Ca ncelmacro mode(33), The subject is not suited to autofo.
i_ ¸oi;_i_ _ _c_i l!_c_i_i_ Problem Solution Some flash modes are The desired flash mode isnot available in the current shooting mode: Choose a different not available, shooting mode (24), The camera.
Playback Problem Solution Pictures are grainy. The picturesweretaken with a different make or model of camera. Playback zoom is unavail- The current pictureis a resized copy with a size of [_]. able. No sound in movie Playback volume is too low: Adjust playback volume (80).
i_ ¸Qi_i_T_ _a_c_i l!_c_i_tic_ Connections/Miscellaneous Problem Solution No pictureor sound. The camera is not properly connected: Connect the ca mera properly (48). AnA/V cable was connectedduring movie playback: Connect the camera oncemovie play- back has ended.
_Warninq Messages and Displays The following warnings are displayed in the LCDmonitor: (red) (blinks red) tel o !AF (displayed in red with red focus frame) Apertureor sh utter speed displayed in red FOCUS ERROR TURN OFF THE CAMERA AND TURN ONAGAIN Warning Description Low battery.
Warning Description The memory card is not formatted for use in the camera. Formatthe card (78). The memory card contacts require cleaning orthe memory card is damaged. Clean the contacts CARD ERROR with a soft, drycloth. Ifthe message isrepeated, formatthecard (78).
Warning Description The camerahas run out of frame numbers (current frame number is 999-9999), Formatthe FRAME NO, FULL memory card and select RENEW for [] FRAME NO. in the setup menu, Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for [] FRAME NO (79).
Warning Description No memory card inserted when _ COPY is selected in the playback menu. Inserta memory card. The source selected for Q COPY contains no images.Select a different source. The DPOF print order on the current memory card contains more than 999 images.
_ps and Tricks The following tips and tricks will help you get the most from your camera. Choose the following settings for improved battery performance: • [] FACE DETECTION (_ 65): OFF • [] AF MO.
When ON is selected for [] FACE DETECTION (_ 65), you carl: • Zoom in on faces when ZOOM (CONTINUOUS) is selected for [] IM- AGE DISP. (_ 78). • Remove red-eye by selecting ON for [] RED EYEREMOVAL 1_ 81 ). • Zoom in on faces during slide shows 1_ 70) or by pressing tile selector down during playback.
Tips _nd Tdck_ • To photograph tile same scene both with and without tile flash, select _NATURAL&_. for r;1SHOOTING MODE (_ 24). Use multi4rame playback (_ 39) to compare the two shots. • To photograph subjects that are in motion, select [] TRACK- ING for IlnAF MODE (_ 66).
Internal Memory/Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All fgures are approximate; file size varies with the scene recorded, producing wide variations in the number of flies that can be stored.
_pecifications Model Digital Camera FinePix XP20 Series Effectivepixels 14,2 million CCD _,k3-in, square pixel CCD with primarycolorfilter Storage media • Internal memory (approx. 10 MB) • SD/SDHC/SDXC memory cards File system Compliantwith Design Rule for Camera File System(DCF), Exif2.
Sensitivity Standard output sensitivity equivalent to ISO 100, 200, 400, 800,1600, 3200;AUTO Metering 2S6-segment through-the-lens (TTL) Exposure control Programmed AE Exposure compensation -2 EV- +2 .
Self-timer Off, 2 sec., I0 sec., _._ (@UPLE T%ER), _.'._(GROUP T%ER) Flash Auto flash; effective range when sensitivity is set to AUTO is approx.70cm-3.1 m/2.2ft.- 10.1 ft (wide angie), 70 cm-2.7 m/2.2 ft-8.8 ft. (telepho_o); effective range in macro mode is approx.
Power supply Battery life (approximate number of flames thatcan be taken with a fully charged battery) CIPA standard,measured in I_1 (auto) modeusing battery supplied with cameraandSD mem- ory card, Note: Number of shots that can be taken with battery va ties with battery charge level andwill declineat low temperatures, Camera dimensions 99.
Nominal voltage DC 3,7 V Nominal capacity 720 mAh Operating temperature 0 °C- +40 °C/+32 °F-+104 °F Dimensions (Wx H × D) 31,0 mm x 39,6 mm x 6,0 mm/1,2 in,x 1,6in, x 02 in, Weight Approx, 15,5 g.
Sp_(:i_(:ation_ • Notices • Specifications subject to change without notice FUJIFILM shall not be held liable for damages resulting from errors in this manual • Although the LCDmonitor is manufa.
FUJ:FILm FUJIFILM Corporation 7-3, AKASAKA 9-CHOME, MtNATO-KU, TOKYO 107-0052, JAPAN http://www.fujifiLm.com/products/digitat cameras/index.htmI.
Een belangrijk punt na aankoop van elk apparaat FujiFilm FINEPIX XP20 BLO1299-200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen FujiFilm FINEPIX XP20 BLO1299-200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens FujiFilm FINEPIX XP20 BLO1299-200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding FujiFilm FINEPIX XP20 BLO1299-200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over FujiFilm FINEPIX XP20 BLO1299-200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van FujiFilm FINEPIX XP20 BLO1299-200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de FujiFilm FINEPIX XP20 BLO1299-200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met FujiFilm FINEPIX XP20 BLO1299-200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
