Gebruiksaanwijzing /service van het product echoMAP 70dv van de fabrikant Garmin
Ga naar pagina of 42
GPSMAP ® 500/700 Series and echoMAP ™ 50/70 Series Owner’s Manual December 2013 190-01556-10_0B Printed in Taiwan.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Introduction .................................................................... 1 Device Views ............................................................................ 1 echoMAP 70 Series and GPSMAP 700 Series .................
Setting the Barometer Reference Time ............................... 13 Tide, Current, and Celestial Information .................................. 13 Tide Station Information ...................................................... 13 Current Station Information .
SiriusXM® ..................................................................... 23 SiriusXM Equipment and Subscription Requirements ............. 23 Weather Data Broadcasts ........................................................ 23 Viewing Precipitation Information .
.
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Views echoMAP 70 Series and GPSMAP 700 Serie.
Customizing the Home Screen You can add items to and rearrange items on the Home screen. 1 From the Home screen, select Customize Home . 2 Select an option: • To rearrange an item, select Rearrange , select the item to move, and select the new location.
original paper chart), navigational aids and symbols, obstructions, and cable areas. Navigating to a Point on the Chart CAUTION The Auto Guidance feature is based on electronic chart information. That data does not ensure obstacle and bottom clearance.
2 Select an option to view additional station information: • Select the station name. • If more than one item is in the vicinity, select Review , and select the station name. Animated Tide and Current Indicators NOTE: This feature is available with premium charts, in some areas.
speed information, or if the vessel is not moving, a projected course line does not appear. Changes in the speed, course over ground, or rate of turn information transmitted by the vessel can impact the calculation of the projected course line.
Chart and 3D Chart View Settings NOTE: Not all settings apply to all charts and 3D chart views. Some options require premium maps or connected accessories, such as radar. These settings apply to the charts and 3D chart views, except the radar overlay and Fish Eye 3D ( Fish Eye 3D Settings ).
NOTE: Not all settings apply to all charts and 3D chart views and chartplotter models. Some options require premium maps or connected accessories, such as radar. From a chart or 3D chart view, select Menu > Chart Setup > Chart Appearance . Orientation : Sets the perspective of the map.
Basic Navigation Questions Question Answer How do I make the chartplotter point me in the direction in which I want to go (bearing)? Navigate using Go To.
NOTE: When using Auto Guidance, a gray segment within any part of the magenta line indicates that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the settings for minimum safe water depth and minimum safe obstacle height.
9 Follow the magenta line, steering to avoid land, shallow water, and other obstacles. Creating and Saving a Route This procedure saves the route and all the waypoints in it. The starting point can be your present location or another location. 1 Select Nav Info > Routes > New Route > Use Chart .
3 Select Edit Track . 4 Select an option: • Select Name , and enter the new name. • Select Track Color , and select a color. Saving a Track as a Route 1 Select Nav Info > Tracks > Saved Tracks . 2 Select a track. 3 Select Edit Track > Save Route .
Viewing Trip Gauges Trip gauges show information for odometer, speed, time, and fuel for your present trip. Select Gauges > Trip Data . Resetting Trip Gauges 1 Select Gauges > Trip Data > Menu . 2 Select an option: • To set all the readings for the present trip to zero, select Reset Trip .
• To calculate the vessel speed based on GPS data, select GPS Speed . Configuring the Heading Source of the Wind Gauge You can specify the source of the heading displayed on the wind gauge. Magnetic heading is the heading data received from a heading sensor, and GPS heading is calculated by your chartplotter GPS (course over ground).
Full-Screen Sonar View There are several full-screen views available, depending on the equipment connected. The full-screen sonar views show a large image of the sonar readings from a transducer. The range scale along the right side of the screen shows the depth of detected objects as the screen scrolls from the right to the left.
traditional transducers or the contrast for DownVü and SideVü/ DownVü transducers. This setting works best after you have adjusted the level of detail shown on the screen using the gain or brightness settings.
• If you have a 200/50 kHz, dual-frequency transducer, select Dual Frequency . • If you have another type of transducer, select it from the list. Sonar Setup Sonar Settings NOTE: Not all options and settings apply to all models, sounder modules, and transducers.
Setting the Depth and Water Temperature Graph Range and Time Scales You can indicate the amount of time and the range of depth that appear in the depth and water temperature graphs. 1 Select Sonar > Data Graphs > Menu . 2 Select Depth Graph Settings or Temperature Graph Settings .
Setting the Standby and Transmit Times Before you can set the standby and transmit times, you must enable timed transmit ( Enabling Timed Transmit ). To help conserve power, you can indicate the radar standby time and the transmit time to implement periodic radar signal transmissions at set intervals.
Radar Overlay and Chart Data Alignment When using the Radar overlay, the chartplotter aligns radar data with chart data based on the boat heading, which is based by default on data from a magnetic heading sensor connected using a NMEA 0183 or NMEA 2000 network.
nearby clutter and targets more than it affects the appearance of distant clutter and targets. A higher sea clutter setting reduces the appearance of clutter caused by nearby waves, but it can also reduce or eliminate the appearance of nearby targets.
Select Nav Info > Other Vessels > DSC List . Adding a DSC Contact You can add a vessel to your DSC list. You can make calls to a DSC contact from the chartplotter. 1 Select Nav Info > Other Vessels > DSC List > Add Contact . 2 Enter the Maritime Mobile Service Identity (MMSI) of the vessel.
4 Select an available channel. Making an Individual Routine Call NOTE: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed, the radio will not receive call information. 1 Select Nav Info > Other Vessels > DSC List .
Adjusting the VHF Squelch NOTE: Your media player must support VHF radio to use this feature. 1 From the VHF source page, select Menu > Squelch . 2 Use the slider bar to adjust the VHF squelch. Scanning VHF Channels Before you can scan VHF channels, you must set the source to VHF.
Waypoints : Shows waypoints. Legend : Shows the weather legend. Storm Cell and Lightning Information Storm cell icons on the weather Precipitation chart indicate both the present position of a storm and the projected path of that storm in the immediate future.
Symbol Weather Symbol Weather Partly cloudy Fair (sunny, hot, clear) Cloudy Rain (drizzle, sleet, showers) Windy Foggy Thunderstorms Snow (snow showers, flurries, blizzard, blowing snow, sleet, freezi.
Review does not appear if the cursor is not near an object. If the cursor is near only one object, the name of the buoy appears. Viewing Local Weather Information near a Buoy You can select an area near a buoy to view forecast information. 1 From a weather chart, select a location on the chart.
GLONASS : Turns on or off GLONASS usage (Russia satellite system). When the system is used in situations with poor sky visibility, this configuration can be used in combination with GPS to provide more accurate position information.
measures the water temperature as being colder than it actually is. Enter this value in step 5 as a negative number if the sensor connected to the chartplotter measures the water temperature as being warmer than it actually is. 4 Select Settings > My Vessel > Temp.
2 Select Settings > Communications > Wireless Devices > Bluetooth Devices > Bluetooth . 3 If necessary, enter a name for this wireless network. 4 If necessary, enter a password. You will need this password to access the wireless network from a wireless device.
Adjusting the Distance from Shore CAUTION The Auto Guidance feature is based on electronic chart information. That data does not ensure obstacle and bottom clearance. Carefully compare the course to all visual sightings, and avoid any land, shallow water, or other obstacles that may be in your path.
2 Select Nav Info > Manage Data > Data Transfer > Card > Save to Card . 3 If necessary, select the memory card to copy data to. 4 Select an option: • To create a new file, select Add New File , and enter a name. The file name is saved with an .
Capturing Screenshots 1 Insert a memory card into the card slot. 2 Select Settings > System > Display > Screenshot Capture > On . 3 Go to a screen you want to capture.
Index A aerial photos 4 AIS 4, 5, 7 alarm 5 distress signal device 5 radar 18 SART 5 targeting 4, 5 threats 5, 18 turning on 30 vessels 5 alarms 29 anchor drag 29 a.
waypoints 18, 20 zoom scale 17 radar overlay 18 radio, SiriusXM 26 range rings 6 registering the device 31 routes copying 30, 31 creating 9, 10 deleting 10 editing 10 nav.
.
www.garmin.com/support 913-397-8200 1-800-800-1020 0808 238 0000 +44 (0) 870 8501242 1-866-429-9296 +43 (0) 820 220230 + 32 2 672 52 54 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 .
Een belangrijk punt na aankoop van elk apparaat Garmin echoMAP 70dv (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Garmin echoMAP 70dv heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Garmin echoMAP 70dv vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Garmin echoMAP 70dv leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Garmin echoMAP 70dv krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Garmin echoMAP 70dv bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Garmin echoMAP 70dv kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Garmin echoMAP 70dv . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
