Gebruiksaanwijzing /service van het product 28213 van de fabrikant GE
Ga naar pagina of 46
Model 28213 Series DECT 6.0 Multi-Handset Speakerphone User ’s Guide Y our new GE telephone system is E XP ANDABLE up to a total of 6 handsets (by purchase of optional Model 28203 handset with charg.
Important Information NOTICE: This pr oduct meets the applicable Industry Canada technical specications. Operation is subject to the following two conditions: (1) This device may not cause interference, and () This device must accept any interference, including interference that may cause undesired operation of the device.
T elephone Network Information Should your equipment cause trouble on y our line which may harm the telephone network, the telephone company, where practicable, may notify you that temporary discontinuance of service may be required.
4 FCC RF Radiation Exposur e Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment . This equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and your body.
5 I mport ant I nforma tIon ..............................2 I nterference I nforma tIon ..........................2 t elephone n et work I nforma tIon ..............3 ren n umber ............................................3 h earIng a Id c ompa tIbIlIty (hac) .
6 t ransferrIng e xternal c alls to o ther h andsets ........................................... 29 c aller Id (cId) ..................................... 29 C all w aiting C aller iD ........................... 30 r eCeiVing CiD r eCorDs ............
7 Handset Telephone line cor d AC power adaptor Handset battery pack Battery compartment cover Base Belt Clip Before Y ou Begin Parts Checklist (for 28213xx1 model) Make sure your package includes the items shown her e. Introduction CAUTION: When using telephone equipment , there are basic safety instructions that should always be followed.
8 T elephone Jack Requirements To use this phone, y ou need an RJ11C type modular telephone jack, which might look like the one pictured here, installed in your home. If y ou don’t have a modular jack, call your local phone company to nd out how to get one installed.
9 Important Installation Guidelines • Avoid sources of noise and heat , such as motors, uorescent lighting, microwave ov ens, heating appliances and direct sunlight . • Avoid areas of excessive dust , moisture and low temperature. • Avoid other cordless telephones or personal computers.
10 nd (button) charge- in use (indicator) do not disturb (button) Base Layout Front View.
11 display ash (button) CALLER ID-VOL 5 or 6 (caller id/volume up or down button) T ALK/SPEAKER (button) *tone/ (button) #pause/ringer (button) END (button) mute/menu OK (button) delete/int/conf (d.
1 Installing the Phone Installing the Handset Battery NOTE: Y ou must connect the handset battery before use. CAUTION: T o reduce the risk of r e or personal injury, use only the Thomson Inc. approved Nickel-metal Hydride battery (Ni-MH) battery model 5-2840, that is compatible with this unit .
1 Base Station 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. . Plug one end of the telephone line cord into the TEL LINE jack on the back of the base and the other end into a modular jack.
14 Programming the T elephone Standby Screen The handset displays the handset number and user name. Programming Functions The system uses a menu structure to give you access to all of the built -in features. Y ou may program the following items in main menu: Phone book, Room Monitor , Alarm Clock, Initial Setup, Sound Setup, Reset Settings.
15 5. Use the touch tone pad to enter the handset name/number to be monitored. NOTE: When this phone system is expanded (up to 6 handsets by purchase of optional Model 28203 handset with rechar ge cradle), handsets are named HANDSET 1, HANDSET 2, HANDSE T 3 and so on respectively.
16 Initial Setup 1. Make sure your phone is OFF (not in T ALK mode). . Press the mute/menu OK button to go to the main menu. . Press caller ID-volume ( 6 or 5 ) button to scr oll to INITIAL SETUP .
17 Date and Time From the Initial Setup Menu: 1. Press the caller ID-volume ( 5 or 6 ) button to scr oll to the DA TE and TIME sub-menu. . Press mute/menu OK button to enter the menu. Use the number keys to enter the current date, (for example, 1 December , 007) key in 0711.
18 Language From the Initial Setup Menu: 1. Press the caller ID-volume ( 5 or 6 ) button to scr oll to the LANGUAGE sub-menu. . Press mute/menu OK button to enter the menu. The screen displays 4 ENGLISH ESP ANOL . . Use the caller ID-volume ( 5 or 6 ) button to scroll to the desir ed language.
19 5. Press and hold the nd button on the base unit , the charge/in use indicator ashes. Press the handset mute/menu OK button. The screen displays REGISTERING .
0 Global De-registration If one or more handsets become lost , you should de-register all handsets to ensure proper system operation. W ARNING: It is not recommended that a handset be de-registered.
1 NOTE: Y ou must have the Ringer V olume set to ON for ring tone t o signal an incoming call. Ringer Volume From the Sound Setup Menu: 1. Press the caller ID-volume ( 5 or 6 ) button to scr oll to the RINGER VOLUME sub-menu. . Press mute/menu OK button to enter the menu.
Voicemail From the Reset Settings Menu: 1. Press the caller ID-volume ( 5 or 6 ) button to scr oll to the VOICEMAIL sub-menu. . Press the mute/menu OK button to enter the menu. The screen displays 4 YES NO . The default setting is NO . . Use the caller ID-volume ( 5 or 6 ) button to move the cursor to YES or NO .
Handset The T ALK/SPE AKER indicator buttons ash when you receive a call and r emain lit during a call. The keypad and CID will also light when a call is received.
4 Answering Calls 1. When the phone rings, pick up the handset and press the T ALK/SPE AKER button. . When nished, press END button to hang up. - OR - If the auto talk mode is selected, pick up the handset from the charge cradle to answer the call immediately.
5 Flash/Call Waiting If y ou subs crib e to th e co mbin ed C all Wai ting Cal ler ID serv ice fro m yo ur l ocal te leph one comp any , yo u wi ll r ece ive Call er I D i nfor mati on ( if avai labl e) o n C all Wait ing cal ls.
6 Page The page feature helps you locate a misplaced handset . To send and receiv e pages, all handsets must be registered. If y our handset is not registered, follow the instructions in the Registration section of this manual. Paging from the Base/Gr oup Page Use the base-only to page all registered handsets at the same time.
7 Intercom Operation (applicable only with additional handsets) The intercom feature allows y ou to have a conversation with another registered handset without tying up the telephone line, allowing you to still receive incoming calls. Making an Auto Int ercom Call 1.
8 Advanced Intercom Featur es Receiving an Incoming Call During an Intercom Call If you receive a telephone call during an inter com call, an incoming call alert tone will be heard (through the earpiece or speaker). If the user w ants to answer an incoming call, they must press END to terminate the intercom and r eceive an incoming ring.
9 NOTE: A handset can enter conference mode dir ectly by pressing T ALK/SPE AKER on the second handset during a call. T ransferring External Calls t o Other Handsets During an external call, you may transfer the external call to another handset . 1.
0 Call Waiting Caller ID Prov ide d yo u subscribe to Call Waiting Caller ID service from your phone company; if you receive an incoming call and y ou are using the GE multi handset system, a beep indicates the presence of a Call Waiting call on the line.
1 Dialing a CID Number 1. Make sure the phone is OFF (not in T ALK mode). . Use the caller ID-volume ( 5 or 6 ) button to display the desired recor d.
Deleting a CID Recor d 1. Make sure the phone is OFF (not in T ALK mode). . Use the caller ID-volume ( 5 or 6 ) button to display the CID record y ou want to delete. . Press the delete/int/conf button. The display shows DELETE CALL ID? NOTE: Pr ess the END button to return to the previous screen without deleting any CID records.
Phonebook Each handset can store up to fty recor ds in phone book for quick dialing; each record can contain a maximum of 0-digit numbers and 14-character names (including spaces). Review Recor ds 1. Make sure the phone is OFF (not in T ALK mode).
4 5. Use the touch-tone pad to enter the telephone number (up to 0 digits, including pauses), and press the mute/menu button to conrm and advance SET MELODY sub-menu. 6. Use the caller ID-volume ( 5 or 6 ) button to select from melody 01 to melody 10 (a testing tone is generated while making melody selection).
5 Dialing a Number from Internal Memory 1. Make sure the phone is OFF (not in T ALK mode). . Press the mute/menu OK button to access the phonebook sub-menu. . Use the caller ID-volume ( 5 or 6 ) button to scroll to VIEW RECORDS . 4. Press the mute/menu OK button to conrm 5.
6 Changing the Battery CAUTION: T o reduce the risk of r e or personal injury, use only the Thomson Inc. approved Model 5-2840 Nickel-metal Hydride battery (Ni-MH), which is compatible with this unit . 1. Make sure the telephone is OFF (not in T ALK mode) before you replace battery.
7 Display Messages The following messages show the status of the phone, provides Caller ID information, or helps you set up and use your phone. BLOCKED NUMBER Indicates the person is calling from a number which is blocked from transmission. CALL SCREENING Indicates you may use the handset to screen calls befor e answering the call.
8 LOW BA T TERY Indicates the battery needs to be charged. MSG W AITING OFF Indicates voice mail has been retrieved fr om service provider . NEW CALL XX XX represents the number of new CID r ecords not reviewed. NEW VOICE MAIL Indicates voice mail has not been retrieved fr om service provider .
9 T roubleshooting Guide Caller ID Solutions No Display • The battery must be fully charged. Try replacing the battery. • Make sure that the unit is connected to a non-switched electrical outlet . Disconnect the unit from the wall and plug it in again.
40 You experience static, noise, or fading in and out • Move closer to base. The handset might be out of range. • Reloca te the base. Ma ke sur e bas e is not plugge d into a n elect rical ou tlet wi th another househ old appl iance. • Charge the battery.
41 Causes of Poor Reception • Aluminum siding. • Foil backing on insulation. • Heating ducts and other metal construction that can shield radio signals. • You’r e too close to appliances such as microwav es, stoves, computers, etc. • Atmospheric conditions, such as strong storms.
4 Warranty Thomson Multimedia Ltd., warrants to the pur chaser or gift recipient that if any manufacturing defect becomes apparent in this product within 1 y ear from the original date of purchase, it will be replaced fr ee of charge, including return transportation.
4 Accessory Information To or der , call the nearest distributor for your ar ea; Ontario: (905) 624-851 Manitoba: (204) 783-2088 British Columbia: (604) 438-8001 Quebec: (514) 352-9071 A shipping and handling fee will be charged upon ordering.
44 Index A Accessory Information 4 Add Records 4 Advanced Intercom Featur es 8 Alarm Clock 15 All Settings Answering Calls 4 Area Code 17 Auto Standby 4 Auto Talk 18 B Base .
45 L Language 18 Last Number Redial 5 Licensing M Making a Call Making an Auto Intercom Call 7 Mute 6 P Page 6 Paging from the Base/Group P age 6 Parts Checklist 7 Phonebook .
Model 81 0005960 (Rev . 1 CAN E) 08- Printed in China Thomson Multimedia Ltd. 0 Eglinton Ave W ., Suite 04 Mississauga, ON Canada L5R E7 © 008 Thomson Multimedia Ltd. Trademark(s) ® Registered Marque(s) ® déposée(s) Visit the GE website at: www .
Een belangrijk punt na aankoop van elk apparaat GE 28213 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen GE 28213 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens GE 28213 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding GE 28213 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over GE 28213 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van GE 28213 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de GE 28213 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met GE 28213 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
