Gebruiksaanwijzing /service van het product PMCS 6.15 van de fabrikant GE
Ga naar pagina of 24
GE MULTILIN TM EnerVista PMCS 6.15 Quick Start Guide i.
EnerVista PMCS 6. 15 Quick Start Guide Table Of Contents INTRODUCTION ............................................................................................................................................. 3 SYSTEM REQUIREMENTS .................
Introduction Welcome to the Enervista P MCS 6.15 Quick start Guide . The intent of this g uide is to quickly walk a user through the basic configuration and opera tion steps in order to view data fr om a GE Multilin device.
EnerVista PMCS 6. 15 Quick Start Guide Recommended system requirements : 2+ GHz Processor 1GB RAM Video capable of displaying 16-bit, 1280x1024 resolution IEDs Supported - Summary The following devices are supported in the Modbus Servers in this release.
Supported Firmware Versions IED Product Versions Supported IED Product Versions Supported 239 2.3x to 2.7x Spectra MicroVersa Trip 5.1x 269+ 6.0x Enhanced MicroVersa Trip C 4.1x 369 1.6x to 2.3x Enhanced MicroVersa Trip D 4.1x 469 2.5x to 5.0x EPM1000 3.
EnerVista PMCS 6. 15 Quick Start Guide Introduction to EnerVista PMCS 6.15 Welcome to EnerVista PMCS 6.15, a PC-ba sed program for on-de mand monitoring a nd control. After successful installation of P MCS 6.15, the first item to launch is the EnerVista P MCS 6.
DEVICE SETUP Toolkit group - Device Setup Introduction to Device Setup The Device Setup tool is use d to add/edit/modify GE IEDs. The ma ximum number of devices t hat can be configured is 100.
EnerVista PMCS 6. 15 Quick Start Guide “Serial” – reserved for devic es using Modbus RT U accessed via PC COM ports connected t o a RS232/485 line.
FAQ Device Modbus slave addressing considerations when using a Multinet or Modbus Bridge: Modbus RTU devices configured with a Multilin Multinet are configured in the Ethernet Site. Each device will have the same IP Address (that of the Multinet) and Modbus Port, but each device on the same Multinet must have a unique Modbus address.
EnerVista PMCS 6. 15 Quick Start Guide Serial, Modbus RTU parameters Returning to the Main Menu: Should you want t o cancel your changes made in this s ession, you can click on the [CANCEL] bu tton to exit back to the EnerVista PMCS Configurator me nu without savi ng.
FAQ EVENTS The Enervista Event Logging syste m is made up of tw o components: the Even tServer, which collects events and stores them in an on-line database, and the EventView er, which provides an intuitive graphical interface for viewing, querying, and PMCS the database c ontents.
EnerVista PMCS 6. 15 Quick Start Guide What’s on the EventViewer Screen? To launch the EventViewer select the “EV ENTS” catego r y i n T O O L K I T a r e a o f t h e m a i n w i n d o w .
FAQ WAVEFORMS Toolkit group – Waveforms Waveform Availability Waveforms are only av ailable from devices that support and are confi gured for automatic wave form retrieval. Manual triggering of waveforms is supported t hrough Waveform Client ap plication on some of the Supported devices.
EnerVista PMCS 6. 15 Quick Start Guide On clicking [Viewer] , Waveform Viewe r application will be launched, which has wave form display, harmonic display, phasors display, a nd playback features. Waveform files retrie ved by Waveform Server in COMTREADE format can be view ed in the Waveform Clien t.
FAQ Displayed on the top of the window are the following parameter fields: • The Blue field (labeled ) displays the parameter value at the blue cursor 2 position. • The Green field (labeled ) displays the parameter valu e at the green cursor 1 p osition.
EnerVista PMCS 6. 15 Quick Start Guide • Select the Trigger button to have the cursor times displayed as an offset from the ‘Trigger Time’ of the COMTRADE fil e. A negative time i ndicates a time that occurs be fore the trigger and a positive time indicates a time that occurs after the trigger.
FAQ • The Delta box on the t op right side of the s creen indicates the differe nce in magnitude between the two cursors. The box at the top shows the di fference in time (milliseconds). • Waveforms may be super-i mposed on top of each other by selecting and dragging them wit h the left mouse button.
EnerVista PMCS 6. 15 Quick Start Guide EnerVista System Tray Tool This is a simple tool for accessing the Se rver applications, in case user wants. This tool is automatically launched by the system while start- up and this is av ailable alwa ys as Tray Icon on the Task bar.
FAQ Understanding Enervista PMCS Architecture P M C S 6 . 1 5 i s d e s i g n e d t o c o m m u n i c a t e w i t h G E M o d b u s d e v i c e s . I t i s c o m p r i s e d o f t h e f o l l o w i n g components.
EnerVista PMCS 6. 15 Quick Start Guide Understanding Modbus device updat e times and system performance Subject: GE Multilin Modbus TCP/IP/RT U device update times Applies to: All GE Multilin Modbus d.
FAQ Modbus TCP/IP vs. Modbus RTU: Many people assume th at Modbus TCP/IP is ‘faster’ th an Modbus RTU due to the fact that it runs on Ethernet or a TCP/IP networ k. However since Mo dbus TCP/IP follows the same r ules as Modbus RTU the device update performance is almos t identical.
EnerVista PMCS 6. 15 Quick Start Guide and creates a Modbus requ est(s) for the required regist ers. If all the registers required can fit into one Modbus return message (124 register s in sequential order) than only one request for one block of data is made.
FAQ Data needed from each MLP QM. For this exampl e each PQM will r equire 5 modbus requests for the required data. Below is a breakdown of the example req uests.
EnerVista PMCS 6. 15 Quick Start Guide UR 1.1.1.2 2000ms 2000ms Multinet 1.1.1.3 1500ms 1500ms *ML750 1.1.1.4 1500m s 1500ms Enervista PMCS Enervista PMCS incorporate device ‘wiz ards’ or pre- made device graphics containing data point displays of typically required in a device.
Een belangrijk punt na aankoop van elk apparaat GE PMCS 6.15 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen GE PMCS 6.15 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens GE PMCS 6.15 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding GE PMCS 6.15 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over GE PMCS 6.15 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van GE PMCS 6.15 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de GE PMCS 6.15 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met GE PMCS 6.15 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
