Gebruiksaanwijzing /service van het product 97550 van de fabrikant Genie
Ga naar pagina of 27
Operator’ s Manual Third Edition Second Printing Part No. 97550.
Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Copyright © 1994 by Genie Industries First Edition: Third Printing, June 1994 Second Edition: Sixth.
P ar t No. 97550 Genie Superlift Advantage 1 Operator's Manual Third Edition • Second Printing Safety Rules W arning F ailure to obey the instructions and saf ety r ules in this manual ma y result in death or ser ious injur y .
2 Genie Superlift Advantage P ar t No . 97550 Operator's Manual Third Edition • Second Printing Fall Hazards Do not use the machine as a personnel lifting platform or step. Do not stand on the load handling attachments. Do not climb on the mast.
P ar t No. 97550 Genie Superlift Advantage 3 Operator's Manual Third Edition • Second Printing SAFETY RULES Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current.
4 Genie Superlift Advantage P ar t No . 97550 Operator's Manual Third Edition • Second Printing SAFETY RULES Crushing Hazards Do not raise if the load is not properly centered on the load handling attachment. Do not raise unless the load is properly secured to the load handling attachment.
P ar t No. 97550 Genie Superlift Advantage 5 Operator's Manual Third Edition • Second Printing SAFETY RULES Damaged Machine Hazards Do not use a damaged or malfunctioning machine. Do not use a machine with a worn, frayed, kinked or damaged cable.
6 Genie Superlift Advantage P ar t No . 97550 Operator's Manual Third Edition • Second Printing Legend 1 2 3 4 11 14 12 15 17 18 19 8 3 4 1 Winch 2 Cable 3 Mast 4 Carriage 5 Adjustable arm 6 Tr.
P ar t No. 97550 Genie Superlift Advantage 7 Operator's Manual Third Edition • Second Printing LEGEND Standard Forks Adjustable Forks 20 20 17 17 24 21 17 Boom Flat Forks 20 17 22 20 23 1 8 Mas.
8 Genie Superlift Advantage P ar t No . 97550 Operator's Manual Third Edition • Second Printing Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
P ar t No. 97550 Genie Superlift Advantage 9 Operator's Manual Third Edition • Second Printing PRE-OPERATION INSPECTION Pre-operation Inspection R Be sure that the operator’s manual is complete, legible and in the storage container located on the machine.
10 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Function T ests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
P ar t No. 97550 Genie Superlift Advantage 11 Operator's Manual Third Edition • Second Printing Function T ests 1 Select a test area that is firm, level and free of obstructions. Setup Machines Without Stabilizers 1 Remove the leg retainer pin and lower the leg to the down position.
12 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing FUNCTION TESTS Flat Forks 1 Place the fork mounting bracket inside the carriage. 2 Insert the retaining pin. 3 Adjust the forks to the desired width and be sure the snap pin is properly inserted in each fork.
P ar t No. 97550 Genie Superlift Advantage 13 Operator's Manual Third Edition • Second Printing FUNCTION TESTS Test Two-Speed Winch Operation 1 Install a load handling attachment. 2 Shift the winch to the slow speed. 3 Raise the carriage by firmly grasping the winch handles and rotating them towards the mast.
14 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing W orkplace Inspection Fundamentals The workplace inspection helps the operator determine if the workplace is suitable for safe machine operation. It should be performed by the operator prior to moving the machine to the workplace.
P ar t No. 97550 Genie Superlift Advantage 15 Operator's Manual Third Edition • Second Printing Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
16 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing OPERATING INSTRUCTIONS Moving Machine with a Load It is best to move the machine on the worksite with no load. Moving a raised load should be restricted to positioning for loading and unloading.
P ar t No. 97550 Genie Superlift Advantage 17 Operator's Manual Third Edition • Second Printing Load Capacity Char ts Observe and Obey: Failure to properly position the load may result in death or serious injury. Verify that the load you wish to raise does not exceed the maximum load for your load center.
18 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing LOAD CAPACITY CHARTS Boom Load P ositioning Instructions 1 Determine the weight of the load and the location of its load center. 2 Refer to the chart below to determine if the machine is capable of lifting the weight at the location on the boom.
P ar t No. 97550 Genie Superlift Advantage 19 Operator's Manual Third Edition • Second Printing T ranspor t and Lifting Instructions Observe and Obey: The transport vehicle must be parked on a level surface. The transport vehicle must be secured to prevent rolling while the machine is being loaded.
20 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Decals Part No. Description Quantity 31072 Label - Operator's Manual Container 1 32686 Warni.
P ar t No. 97550 Genie Superlift Advantage 21 Operator's Manual Third Edition • Second Printing DECALS.
22 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Part No. Description Quantity 32689 Cosmetic - SLA-5 2 32690 Cosmetic - SLA-10 2 32691 Cosmetic -.
P ar t No. 97550 Genie Superlift Advantage 23 Operator's Manual Third Edition • Second Printing DECALS.
24 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Model SLA-5 SLA-10 SLA-15 SLA-20 SLA-25 Height-Stowed 78 1 / 2 in 78 1 / 2 in 78 1 / 2 in 78 1 / .
P ar t No. 97550 Genie Superlift Advantage 25 Operator's Manual Third Edition • Second Printing SPECIFICATIONS Dim ensio ns SLA-5 SLA-10 SLA-15 SLA-20 SLA-25 Standard Forks forks down 4 ft 10 1 / 2 in 9 ft 9 in 14 ft 7 1 / 2 in 19 ft 6 in 24 ft 4 in 1.
Een belangrijk punt na aankoop van elk apparaat Genie 97550 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Genie 97550 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Genie 97550 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Genie 97550 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Genie 97550 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Genie 97550 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Genie 97550 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Genie 97550 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
