Gebruiksaanwijzing /service van het product IC-M21 van de fabrikant Genius
Ga naar pagina of 32
INSTRUCTION MANUAL iM21 VHF MARINE TRANSCEIVER.
i IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. ❍ USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. “MA YDA Y MA YDA Y MA YDA Y .” 2. “THIS IS ...........
ii FOREWORD Thank you for purchasing this Icom product. The IC-M21 VHF MARINE TRANSCEIVER is designed and built with Icom’ s su- perior technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation.
CAUTIONS R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fi re hazard or result in an electric shock. R W ARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body , especially the face or eyes, while transmitting.
iv IN CASE OF EMERGENCY ................................................ i RECOMMENDA TION ........................................................... i FOREWORD ....................................................................... ii IMPORT ANT ...
D Priorities • Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy . Safety and distress calls take priority over all others. • Y ou must monitor Channel 16 when you are not operating on another channel. • False or fraudulent distress calls are prohibited under law .
2 2 P ANEL DESCRIPTION q DIAL / CHANNEL GROUP SWITCH [DI A L ] • Selects and changes the regular channels. (p. 6) • Selects one of 2 regular channels in se- quence when pushed for 1 sec. (p. 6) - International and U.S.A. (U.K. version only) channels* are available for regular channels.
3 2 P ANEL DESCRIPTION CAUTION!: When attaching or releasing a battery pack, make sure the rubber seal is set in the groove of the battery pack/case correctly . If the seal is not neatly in the groove it may be damaged when attaching the battery pack/case.
4 2 P ANEL DESCRIPTION ■ Function display q TRANSMIT INDICA T OR (p. 8) Appears while transmitting. w BUSY INDICA T OR (p. 8) Appears when receiving a signal or when the squelch opens. e T AG CHANNEL INDICA T OR (p. 12) Appears when a tag channel is selected.
5 2 P ANEL DESCRIPTION o SUB CHANNEL READOUT • Indicates Channel 16 during priority scan. • Indicates Channel 16 during dualwatch or tri-watch. (p. 10) • Indicates the SET mode item while in SET mode !0 BA TTER Y INDICA TOR Indicates remaining battery power .
6 3 BASIC OPERA TION D International and U.S.A. channels There are 57 International and 57 U.S.A. channels. These channel groups may be speci fi ed for the operating area. q Push [DIAL] to select a regular channel. w Push [ Y ]/[ Z ] switches to select a channel.
7 3 BASIC OPERA TION ■ Lock function This function electronically locks all keys, except [PTT], [SQL • MONI ] and [H/L • LOCK ] to prevent accidental channel changes and function access. • Push [H/L • LOCK ] for 1 sec. to turn the lock function ON and OFF .
8 3 BASIC OPERA TION q Rotate [OFF/VOL] clockwise to turn power ON. - Use the squelch function to mute any audio noise if necessary . Refer to the previous page for details. w Push* [SQL • MONI ] for 1 sec., and rotate volume to set audio output level.
9 3 BASIC OPERA TION ■ Call channel programming The call channel switch is used to select Channel 9 by de - fault, however , you can program your most often-used chan- nels in each channel group for quick recall. q Push [DIAL] for 1 sec. to select the desired channel group (INT , USA) to be programmed.
10 4 DUAL W A TCH/TRI-W A TCH ■ Description Dualwatch monitors Channel 16 while you are receiving an- other channel; tri-watch monitors Channel 16 and the call channel while receiving another channel.
11 5 SCAN OPERA TION ■ Scan types Scanning is an ef fi cient way to locate signals quickly over a wide frequency range. The transceiver has a priority scan and a normal scan. Set the tag channels (channels to be scanned) before scan- ning. Clear the tag channels which inconveniently stop scan- ning, such as those used for digital communications.
12 5 SCAN OPERA TION ■ Setting tag channels For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Chan- nels set as non-tag channels will be skipped during scanning. T ag channels can be assigned to each channel group (INT , USA) independently .
13 6 SET MODE ■ SET mode programming SET mode is used to change the conditions of 1 1 transceiver functions: beep tone, scan type, scan resure timer , auto scan, monitor action, automatic backlighting, LCD contrast, auto power save, self check, battery voltage and S/RF meter .
D Scan resume timer “ St ” The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until a received signal disappears. When ON is selected, the scan pauses for 5 sec. after receiving a signal and then re- sumes even if the signal is still being received.
D Self check function “ SC ” The self check function checks transceiver conditions by it- self, and informs you in case a problem is found. The follow- ing items are checked after the power is turned ON, then it switches to operation mode.
16 6 SET MODE D Battery voltage indicator “ bt ” This function contains display or non-display settings of the voltage of the connected battery pack when the power is ON. • The voltage of the connected battery pack is displayed for 2 sec. after power is turned ON.
17 7 BA TTER Y CHARGING ■ Battery charging Prior to using the transceiver for the fi rst time, the Ni-Cd bat- teries must be fully charged for optimum life and operation. • Recommended temperature range for charging: +10 ° C to +40 ° C (+50 ° F to +104 ° F) • Use the supplied charger (BC-150) only .
18 7 BA TTERY CHARGING ■ Installing batteries in the battery case (Not supplied with some versions) When using a battery case attached to the transceiver , install 6 × AA(R6) size alkaline batteries as illustrated below . q Remove the battery case from the transceiver .
19 7 BA TTERY CHARGING D Rapid charging with the BC-121N+AD-103 The optional BC-121N allows up to 6 battery packs to be charged simultaneously . The following are additionally re- quired. • Six AD-103. • An AC adapter (BC-124) or the DC power cable (OPC-656).
20 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Supplied accessories The following accessories are supplied: Qty . q Flexible antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 w Swivel belt clip . . . . . . . . . . . . . . . . . .
D Swivel belt clip T o attach: q Slide the stopper into the plastic loop on the back of the transceiver . w Clip the belt clip to a part of your belt. 21 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS e Insert the stopper to the back of the belt clip. Once the transceiver is locked in place, it will swivel 360 de- grees.
22 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS T o remove: q T urn the transceiver upside down, and then lift to release the transceiver from the belt clip. w Release the belt clip. e Push the top of the stopper towards the transceiver and out at the same time, then push it downwards and free of the plastic loop.
23 9 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION . REF . No sound comes from the speaker . • Squelch level is too deep. • V olume level is too low . • Speaker has been exposed to water . p. 7 p. 8 — • Set squelch to the threshold point. • Set [OFF/VOL] to a suitable level.
24 10 CHANNEL LIST International channels CH Frequency (MHz) CH Frequency (MHz) CH Frequency (MHz) CH Frequency (MHz) CH Frequency (MHz) CH Frequency (MHz) T ransmit Receive T ransmit Receive T ransmit Receive T ransmit Receive T ransmit Receive T ransmit Receive 01 156.
25 11 SPECIFICA TIONS AND OPTIONS ■ Speci fi cations • GENERAL Frequency coverage : T ransmit 156.000 – 161.450 MHz Receive 156.000 – 163.425 MHz Mode : FM (16K0G3E) Channel spacing : 25 kHz Current drain (at 7.5 V DC) : TX High (5 W) 1.5 A typical (1 W) 0.
DECLARATION OF CONFORMITY We Icom Inc. Japan 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan Kind of equipment: VHF MARINE TRANSCEIVER This compliance is based on conformity with the following harmonised standards, specifications or documents: i) EN 301 178-2 V1.
Count on us! 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0002 Japan A-61 17H-1EU Printed in Japan © 2001 Icom Inc. GER BEL SWE FRA AUT LUX DEN SUI NED GRE IRL POR ITA GBR ESP FIN < Intended Country of.
Een belangrijk punt na aankoop van elk apparaat Genius IC-M21 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Genius IC-M21 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Genius IC-M21 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Genius IC-M21 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Genius IC-M21 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Genius IC-M21 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Genius IC-M21 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Genius IC-M21 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
