Gebruiksaanwijzing /service van het product 2801330 van de fabrikant Global Upholstery Co.
Ga naar pagina of 76
2801330 Use r’s Ma n ua l Vers ion 1.0 Mini-ITX Motherboard.
Copyright s This document is copyrighted and all rights are reserved. It does not allow a ny non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent fr om the manufacturer .
Page 15 KINO-LX Motherboard Chapter 1 1 Introduction.
Page 16 IEI ® T echnology , Corp . KINO-LX Motherboard 1.1Motherboard Overview 1.1.1 Applications Industrial PC applications Human Machine Interface (HMI) applications Marine, GPS and transport ation applications Financial, ret ail and kiosk applications 1.
Page 17 KINO-LX Motherboard Supports 2 4-bit TTL LCD and si ngle channel 1 8-bit L VDS LCD Comes with two high performan ce 10/100MB Ethernet controllers Supports two SA T A channels with transfe r rates up to 150Mb/s 1.2 Overview Figure 1-1: Overvie w 1.
Page 18 IEI ® T echnology , Corp . KINO-LX Motherboard 2 x Fan connectors 1 x Floppy disk connector 1 x Front panel c onnector 1 x GPIO connector 2 x IDE Interface connectors .
Page 19 KINO-LX Motherboard 1.2.2 Technical Specifications Technical specications are listed in Table 1-1 . Detailed descriptions of each specication can be found in Chapter 2 .
Page 20 IEI ® T echnology , Corp . KINO-LX Motherboard SPECIFICATION DESCRIPTIO N Physical Dimensions 170mm x 170mm Operating Temperature Minimum: 0ºC (32°F) - Maximum: 60°C (140°F) Operating Humidity Minimum: 5% - Maximum: 95% Weight Gross: 1.
Page 21 KINO-LX Motherboard Chapter 2 2 Detailed Specifications.
Page 22 IEI ® T echnology , Corp . KINO-LX Motherboard 2.1 CPU Support The PCB has a preinstalled AMD LX 800 proc essor. Technical specications for the AMD LX 800 processor are listed below: x.
Page 23 KINO-LX Motherboard Technical specifications of the AMD Ge ode™ CS5536 chi pset are listed below. For more information on these two chipsets please refer to the AMD website .
Page 24 IEI ® T echnology , Corp . KINO-LX Motherboard 2.2.1 Data Flow Figure 2-1: Data Flow Block Diagram.
Page 25 KINO-LX Motherboard 2.3 Graphics Support Feature AMD Geode™ LX Processor Color Depth 8, 16, 32 bpp (A) RGB 4 and 8-bit indexed ROPs 256 (2-src, dest and pattern) BLT Buffers FIFOs in Graphic.
Page 26 IEI ® T echnology , Corp . KINO-LX Motherboard Feature AMD Geode™ LX Processor Variable Source Stride Yes Variable Destination Stride Yes Destination Write Bursting Yes Selectable BLT Direction Vertical and Horizo ntal Alpha BLT Yes (constant α , α /pix, or sep.
Page 27 KINO-LX Motherboard o Compatible with IBM PC AT disk drive systems o Variable write pre-compensation wi th track selectable capability o Support vertical recordi ng format o DMA enable logic o.
Page 28 IEI ® T echnology , Corp . KINO-LX Motherboard o Compatible with IBM parallel port o Support PS/2 compatible bi-directional p arallel port o Support Enhanced Parallel Port (EPP) - Compatible .
Page 29 KINO-LX Motherboard o Keyboard Wake-Up by programmable keys o Mouse Wake-Up by progra mmable buttons o On Now Wake-Up from all of the ACPI sleeping states (S1-S5 ) Hardware Monitor Functi .
Page 30 IEI ® T echnology , Corp . KINO-LX Motherboard 10Mbps and 100Mbp s operation Supports 1 0Mbp s and 100Mbp s N-way auto-negotiat ion Supports 2 5MHz Cryst al or 25MHz OSC as the in.
Page 31 KINO-LX Motherboard 2.7.2 IDE HDD Interface 100 MB/second IDE Controller in UDMA mode pe r the A T A-6 speci fication 2.7.3 Floppy Disk Dr ive (FDD) Interface 5.25”: 360KB and 1.2MB 3.5”: 720KB, 1.44MB and 2.88MB 2.8 Serial Ports 16C550 UAR T with 16/32 byte sele ctable FIFO buf fer 1 15.
Page 32 IEI ® T echnology , Corp . KINO-LX Motherboard o 12.288MHz BITCLK input can be consumed o Integrated PCBEEP generator to save buzzer o Interrupt capability o Page registers and Analog Plug & Play Support of S/PDIF out is fully compliant with AC'97 rev2.
Page 33 KINO-LX Motherboard V oice Cancellation and Key Shif ting in Karaoke mode A VRack® Me dia Player 2.10 Real Time Clock 256-byte battery backed CMOS RAM 2.11 System Monitoring CPU, chipset, and battery voltage, +5V , and +12V CPU and board temperatures (by the corresponding embedded sensors) 2.
Page 34 IEI ® T echnology , Corp . KINO-LX Motherboard 2.14 Power Consumption Table 2-2 sh ows the power consumpti on pa rameters for the when an AMD LX-8 0 0 CPU is ru n ning with a 333 MHz , 256MB DDR RAM modul e . Voltage Current +5V 1.45A +12V 0.
Page 35 KINO-LX Motherboard 2.16 Packaged Contents and Optional Accessory Items 2.16.1 Package Contents 1 x Mini jumper pack 1 x ATA66/100 flat cable 2 x Dual RS-232 cables 2 x SATA cables 1 x SATA Power cable 1 x I/O Shielding 1 x Utility CD 1 x QIG (quick installation guide) 2.
Page 37 KINO-LX Motherboard Chapter 3 3 Connectors and Jumpers.
Page 38 IEI ® T echnology , Corp . KINO-LX Motherboard 3.1 Peripheral Interface Connectors Section 3.1.1 shows peripheral interf ace conne ctor locati ons. Sect ion 3.1.2 lists all the peripheral interface connectors seen in Section 3.1.1 . 3.1.1 Layout Figure 3-1 shows the on-board periphe ral connectors and on-board jumpers.
Page 39 KINO-LX Motherboard Connector Ty p e Label A T/A TX power connector 20-pin header CN19 CD-IN connector 4-pin header CN9 DIMM socket 184-pin socket CN22 5V Fan connector 3-pin box header CN23 1.
Page 40 IEI ® T echnology , Corp . KINO-LX Motherboard 3.1.3 External Peripheral Interface Connectors Connector Ty p e Label Audio connector 2 x audio jacks CN8 Ethernet and USB combo connector RJ-45 and USB 2.0 connectors CN6 Ethernet and USB combo connector RJ-45 and USB 2.
Page 41 KINO-LX Motherboard 3.2 Internal Peripheral Connectors Internal perip heral con nectors are fo un d on the motherbo ard and are only accessibl e wh e n the mo t her b o a rd is outside of the ch a s si s . Th is sect ion h a s co mple t e de sc r ip t i o ns of all the intern a l perip h eral conn e ctors .
IEI ® T echnology , Corp . KINO-LX Motherboard PIN DESCRIPT ION PIN DES CRIPTION 11 NC 1 NC 12 -12V 2 NC 13 GND 3 GND 14 PSON 4 +5V 15 GND 5 GND 16 GND 6 +5V 17 GND 7 GND 18 NC 8 PW-OK 19 +5V 9 +5VSB.
Page 43 KINO-LX Motherboard 3.2.2 CD-IN Connector CN Label: CN9 CN Type: 4-pin header CN Location: See Figure 3-3 CN Pinouts: See Ta b l e 3 - 5 The CD-In connector connects to au dio sour ces such as CD/DVD-ROM optical drives.
Page 44 IEI ® T echnology , Corp . KINO-LX Motherboard 3.2.3 5V Fan Connector CN Label: CN23 CN Type: 3-pin wafer CN Location: See Figure 3-4 CN Pinouts: See Ta b l e 3 - 6 The cooling fan connector provide s a 5V curr ent to a system cooling fan.
Page 45 KINO-LX Motherboard 3.2.4 12V Fan Connector CN Label: CN21 CN Type: 3-pin wafer CN Location: See Figure 3-5 CN Pinouts: See Ta b l e 3 - 7 The cooling fan connector provides a 1 2V, 500mA current to a system cooling fan.
Page 46 IEI ® T echnology , Corp . KINO-LX Motherboard 3.2.5 Floppy Disk Connector CN Label: CN26 CN Type: 34-pin box header CN Location: See Figure 3-6 CN Pinouts: See Ta b l e 3 - 8 The floppy disk conne ctor connects to a floppy disk drive.
Page 47 KINO-LX Motherboard PIN DESCRIPT ION PIN DES CRIPTION 1 GND 2 DENSEL 3 GND 4 NC 5 GND 6 NC 7 GND 8 INDEX# 9 GND 10 MOA# 11 GND 12 NC 13 GND 14 DSA# 15 GND 16 NC 17 GND 18 DIR# 19 GND 20 STEP# .
Page 48 IEI ® T echnology , Corp . KINO-LX Motherboard Power LED HDD LED Figure 3-7: Front Panel Connector Pinout Locations PIN DESCRIPT ION PIN DESCRI PTION 1 PWRLED+ 2 Buzzer+(+5V) 3 NC 4 N.
Page 49 KINO-LX Motherboard 3.2.7 GPIO Connector CN Label: CN18 CN Type: 10-pin header (2x5 pin s) CN Location: See Figure 3-8 CN Pinouts: See T able 3-10 The General Purpose Input Output (GPIO) co nnector can be connected to external I/O control devices including sensors, lights, alarms and swit ches.
Page 50 IEI ® T echnology , Corp . KINO-LX Motherboard 3.2.8 IDE Connectors CN Label: CN29 (Primary) and CN28 (Secondary ) CN Type: 40-pin header (2x20 ) CN Location: See Figure 3-9 CN Pinouts: See T.
Page 51 KINO-LX Motherboard Figure 3-9: IDE Device Connector Location s.
Page 52 IEI ® T echnology , Corp . KINO-LX Motherboard PIN DESCRIPT ION PIN DES CRIPTION 1 RESET# 2 GND 3 D7 4 D8 5 D6 6 D9 7 D5 8 D10 9 D4 10 D11 11 D3 12 D12 13 D2 14 D13 15 D1 16 D14 17 D0 18 D15 .
Page 53 KINO-LX Motherboard 3.2.9 Inverter Power Connector CN Label: CN12 CN Type: 5-pin wafer CN Location: See Figure 3-10 CN Pinouts: See T able 3-12 The inverter connector is connected to the LCD backl ight.
Page 54 IEI ® T echnology , Corp . KINO-LX Motherboard 3.2.10 Keyboard/Mouse Connector CN Label: CN2 CN Type: 6-pin wafer CN Location: See Figure 3-1 1 CN Pinouts: See T able 3-13 For alternative applications, an on board ke yboard/mouse pin header con nector is also available.
Page 55 KINO-LX Motherboard 3.2.11 LCD LVDS Connector CN Label: CN13 CN Type: 20-pin crimp conne ctor CN Location: See Figure 3-12 CN Pinouts: See T able 3-14 The LCD LVDS connector is connected to a LCD LVDS display device.
Page 56 IEI ® T echnology , Corp . KINO-LX Motherboard PIN DESCRIPT ION PIN DES CRIPTION 2 GND 1 GND 4 D0- 3 D0+ 6 D1- 5 D1+ 8 D2- 7 D2+ 10 CLK- 9 CLK+ 12 NC 11 NC 14 GND 13 GND 16 SCL 15 SDA 18 LCD_.
Page 57 KINO-LX Motherboard 3.2.12 LCD TTL Connector CN Label: CN1 1 CN Type: 40-pin crimp conne ctor CN Location: See Figure 3-13 CN Pinouts: See T able 3-15 The LCD TTL connector is connected to a LCD TTL display devi ce.
Page 58 IEI ® T echnology , Corp . KINO-LX Motherboard PIN DESCRIPT ION PIN DES CRIPTION 2 LCD_VCC 1 LCD_VCC 4 GND 3 GND 6 LCD_VCC 5 LCD_VCC 8 GND 7 SDA 10 B1 9 B0 12 B3 11 B2 14 B5 13 B4 16 B7 15 B6.
Page 59 KINO-LX Motherboard Figure 3-14: PCI Slot Location PIN DESCRIPT ION PIN DESCRIPTIO N A1 TRST B1 -12V A2 +12V B2 TCK.
Page 60 IEI ® T echnology , Corp . KINO-LX Motherboard PIN DESCRIPT ION PIN DESCRIPTIO N A3 TMS B3 GND A4 TDI B4 TDO A5 +5V B5 +5V A6 INTA B6 +5V A7 INTC B7 INTB A8 +5V B8 INTD A9 RESERVED3 B9 PRSNT1 A10 +5V B10 RESERVED1 A11 RESERVED4 B11 PRSNT2 A12 GND B12 GND A13 GND B13 GND A14 3.
Page 61 KINO-LX Motherboard PIN DESCRIPT ION PIN DESCRIPTIO N A35 GND B35 IRDY A36 TRDY B36 +3.3V A37 GND B37 DEVSEL A38 STOP B38 GND A39 +3.3V B39 LOCK A40 SDONE B40 PERR A41 SBO B41 +3.3V A42 GND B42 SERR A43 PAR B43 +3.3V A44 AD15 B44 C/BE 1 A45 +3.
Page 62 IEI ® T echnology , Corp . KINO-LX Motherboard 3.2.14 RS-232/422/485 Serial Port Connector CN Label: CN10 CN Type: 2x7 pin header CN Location: See Figure 3-15 CN Pinouts: See T able 3-17 The CN10 serial port conn ector connects to an RS-232 or RS -485 serial po rt devices.
Page 63 KINO-LX Motherboard 3.2.15 RS-232 COM Seri al Port Connector CN Label: COM3 , COM4 , COM5 and COM6 CN Type: 10-pin header (2x5) CN Location: See Figure 3-16 CN Pinouts: See T able 3-18 The COM3, COM4, COM5 and COM6 serial po rt connectors con nect to RS-232 serial po rt devices.
Page 64 IEI ® T echnology , Corp . KINO-LX Motherboard PIN DESCRIPT ION PIN DES CRIPTION 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND 10 GND Table 3-18: RS-232 Serial Port Connector Pinouts 3.
Page 65 KINO-LX Motherboard PIN DESCRIPT ION 1 GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND Table 3-19: SATA Drive Connector Pinouts 3.3 External Peripheral Interface Connector Panel 1 x PS/2 keyboard .
Page 66 IEI ® T echnology , Corp . KINO-LX Motherboard 3.3.1 Keyboard/Mouse Connector CN Label: CN8 CN Type: Dual PS/2 CN Location: See Figure 3-18 (labeled number 1) CN Pinouts: See Figure 3-19 and .
Page 67 KINO-LX Motherboard 3.3.2 Serial Port Connector CN Label: CN3 CN Type: D-sub 9 male connecto r CN Location: See Figure 3-18 (labeled number 2) CN Pinouts: See Figure 3-20 and T able 3-21 Figure 3-20: Serial Port Connector Serial port connector (COM 1) pinouts are shown below.
Page 68 IEI ® T echnology , Corp . KINO-LX Motherboard 3.3.3 Parallel Port Connector CN Label: CN5 CN Type: DB-25 female connector CN Location: See Figure 3-18 (labeled number 3) CN Pinouts: See Figu.
Page 69 KINO-LX Motherboard 3.3.4 VGA connector CN Label: CN4 CN Type: HD-D-sub 15 female connector CN Location: See Figure 3-18 (labeled number 4) CN Pinouts: See Figure 3-22 and T able 3-23 A 15-pin VGA connector co nnects to standard displays.
Page 70 IEI ® T echnology , Corp . KINO-LX Motherboard 3.3.5 LAN Connectors CN Label: CN6 and CN7 CN Type: RJ-45 CN Location: See Figure 3-18 (labeled number 5 and 6) CN Pinouts: See T able 3-24 PIN DESCRIPT ION PIN DESCRIPTIO N 1 +2.
Page 71 KINO-LX Motherboard STATUS DESCRIPTION STATUS DESCRI PTION GREEN Activity YELLOW Linked Table 3-25: RJ-45 Ethernet Connector LEDs 3.3.6 USB Connectors CN Label: CN6 and CN7 CN Type: USB port C.
Page 72 IEI ® T echnology , Corp . KINO-LX Motherboard 3.3.7 Audio Connector CN Label: CN1 CN Type: 2 x audio jacks CN Location: See Figure 3-18 (labeled n umber 7) CN Pinouts: See Figure 3-24 Line Out port (Lime): Con nects to a he adphone or a speaker .
Page 73 KINO-LX Motherboard Chapter 4 4 Installation.
Page 74 IEI ® T echnology , Corp . KINO-LX Motherboard 4.1 Anti-static Precautions Electrostatic discharge (ESD) can cause serious damage to electronic components, including the Motherboard.
Page 75 KINO-LX Motherboard o Electronic components a re easily damaged by ESD. Wea ring an ESD cuff removes ESD from the user’s body and help to preve nt ESD damage. Place the motherboard on an antistatic pad o When the motherboard is installe d and configured, place it on an antistatic pad.
Page 76 IEI ® T echnology , Corp . KINO-LX Motherboard Do not place a PCB on top of an anti-static bag. O nly the inside of the bag is safe from static discharge. 4.3.2 Checklist When PCB is unpacked please make sure the package co ntains the following items.
Page 77 KINO-LX Motherboard W ARNING! When inst alling electronic components onto the PCB always take anti-static precautio ns in order to prevent ESD damage to the PCB and other electronic component s like the CPU and DIMM modules 4.4.1 Preinstalled Components CPU 4.
Page 78 IEI ® T echnology , Corp . KINO-LX Motherboard Step 2: Step 3: Align the DIMM module with the DIMM socket making sure th e matching pins are correctly aligned. Insert the DIMM module slowly . Once it is correctly inserted, push down firmly . The white handles on either side of the so cket move back up and lock the module into the socket.
Page 79 KINO-LX Motherboard Quantity Type 1 mini jumper pack 1 ATA 66/100 HDD cable 2 SATA cables 1 SATA power cable 1 Dual RS-232 cables Table 4-1: IEI Provided Cables 4.5.1 IDE Disk Drive Connectors (CN29 Primary, CN28 Secondary) The cable used to connect the CPU card to an IDE HDD is a stand ard 40-pin ATA66/100 flat cable.
Page 80 IEI ® T echnology , Corp . KINO-LX Motherboard NOTE: When two EIDE disk drives are co nne cted together, back-end jumpers on the drives must be used to configure one drive as a m aster and the other as a slave.
Page 81 KINO-LX Motherboard 4.5.4 LCD Backlight Installation To connect an LCD backlight (inverter) to t he motherboard, follow the instructions below. Step 1: Step 1: Step 1: Step 1: Connect the 5-pin conne ctor end of the LCD backlight cable to the CN12 header on the mothe rboard.
Page 82 IEI ® T echnology , Corp . KINO-LX Motherboard 4.6 Jumper Settings NOTE: A jumper is a metal bridge t hat is used to close an electrical circuit. It consist s of two metal pins and a small metal clip (often prote cted by a plastic cover) that slides over the pins to connect them.
Page 83 KINO-LX Motherboard Figure 4-3: Jumper Locations 4.6.1 Clear CMOS Jumper Jumper Label: JP4 Jumper Type: 3-pin header Jumper Settings: See Ta b l e 4 - 3 Jumper Location: See Figure 4-3 If the PCB fails to boot due to improper BI OS settings, use this connector to clear the CMOS d a ta and reset the system BI O S inform atio n .
Page 84 IEI ® T echnology , Corp . KINO-LX Motherboard Clear CMOS DESCRIPTION Short 1 - 2 (Default) Keep CMOS Setup Short 2 - 3 Clea r CMOS Setup Table 4-3: Clear CMOS Jumper Settings 4.
Page 85 KINO-LX Motherboard 4.6.3 COM2 RS-232/ 422/485 Select Jumper Label: JP2 Jumper Type: 6-pin header Jumper Settings: See Ta b l e 4 - 5 Jumper Location: See Figure 4-3 The RS-232/422/485 sele ct jumper set s the communication proto col u sed by the second serial communicatio ns port (COM2) a s RS-232, RS-422 or RS-48 5.
Page 86 IEI ® T echnology , Corp . KINO-LX Motherboard JP1 DESCRIPTION 1-3 COM1 RI Pin Us e +12V 3-5 COM1 RI Pin Us e +5V 7-9 COM1 RI Pin Us e RI 2-4 COM2 RI Pin Us e +12V 4-6 COM2 RI Pin Us e +5V 8-10 COM2 RI Pin Use RI Table 4-6: COM2 Voltage Setup Jumper Settings 4.
Page 87 KINO-LX Motherboard The AT/ATX power connector is used to connect a chassi s power On/Off button using an adapter cable and is configured thro ugh the JP6 jumper.
Page 88 IEI ® T echnology , Corp . KINO-LX Motherboard 4.8.2 Serial Connection The external peripheral interface co nnecto r panel serial connector provides easy and quick access to external serial devices. 4.8.3 Parallel Connector The external parallel port connector connects to a printer.
Any advice or comments about our product s and service, or anything we can help you with please don’t hesitate t o contact wit h us. We will do our best to support your products, project s and business. Address: Global American, Inc. 17 Hampshire Drive Hudson, NH 03051 T elephone: T oll Free U.
Een belangrijk punt na aankoop van elk apparaat Global Upholstery Co. 2801330 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Global Upholstery Co. 2801330 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Global Upholstery Co. 2801330 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Global Upholstery Co. 2801330 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Global Upholstery Co. 2801330 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Global Upholstery Co. 2801330 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Global Upholstery Co. 2801330 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Global Upholstery Co. 2801330 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
