Gebruiksaanwijzing /service van het product IT640-ORA-W van de fabrikant Gorenje
Ga naar pagina of 20
Ceramic glass induction hob MT Instructions for use, installation, and connection IE GB.
243971 The built-in ceramic-glass cooktop is intended for household use only . Materials used for packaging are nature friendly and may be recycled, deposited or destroyed without any threats to the environment. In order to recognize these features, all packing materials are marked with relevant symbols.
243971 • The appliance may be built-in and connected to the power supply only by a quali fi ed technician. • Particular areas of the cooktop surface (adjacent to the hotplates) are hot during operation. Prevent the children to hang around the appliance and warn them properly against the danger of burns.
243971 A ON/OFF sensor B Hotplate power or remaining heat displays B1 Decimal dot on the power displays: - On : hotplate power control is possible - Off : hotplate power control is not possible C Hotp.
243971 • Ceramic glass hob is fi tted with four hotplates. Hob surface is completely fl at and smooth, without edges to accumulate dirt. • The hob is fi tted with high power induction hotplates. Heat is generated directly at the bottom of the dish, where it is most needed, without any losses through the ceramic glass surface.
243971 Magnet test Use small magnet to test if the dish bottom is magnetic. Only dishes where magnet sticks to the bottom are suitable for induction cooking.
243971 • When buying cookware be careful in selecting size: pot diameter usually refers to the top edge of the dish, which is often larger than the dish bottom. • Steam-pressure pots (economic pots), which use pressure in tightly sealed interior , are especially economic, and save both time and energy .
243971 • After turning the ceramic glass hob on all displays come on for a moment. The hob is ready for operation. • The hob is fi tted with electronic sensors which are switched on if you touch the relevant circle for at least one second. • Each sensor activation is followed by a sound signal.
243971 Fast deactivation • Selected hotplate must be activated, decimal dot (B1) is on. • Press both (+) and (-) (C and E) sensors simultaneously , and the hotplate is immediately switched off. • The hob can be switched off any time by pressing the ON/OFF sensor (A).
243971 During the time extra power is activated, the power of other hotplates is limited. This is indicated on the power display by intermittently showing the selected cooking level and limited power . Activating extra powerful setting • First select the hotplate by touching its relevant sensor , and immediately after press the sensor “P”.
243971 Hint • If the power selection knob remains at level 0 three seconds after the automatic fast heating is activated, that is if you fail to select the power setting for regular cooking, the fast heating function is switched off.
243971 Example: Set the hotplate to power level 6 and leave it operate for some time. If you do not change the above setting, the safety mechanism will switch the hotplate off after one hour and a half.
243971 Remaining cooking time Y ou can display the remaining cooking time by touching the hotplate ON/OFF sensor (C). Switching the timer off When the preset time expires a beep is heard which you can either turn off by touching any sensor or leave it to turn of f automatically after 2 minutes.
243971 • During the time the alarm is activated, timer can not be preset for any hotplate (to enable timer setting function, alarm must be switched off). The hob is equipped with the overheat safety sensors. When they are activated they turn off the hotplates nearest to the control board.
243971 Major stains are removed with special ceramic-glass cleansers. Follow strictly the manufacturer ’s instructions. Be careful to remove any remains of cleansing agent from the hob surface, otherwise they will be heated during the next use and can damage the hob ( fi g.
243971 Before inserting the appliance into the opening in the kitchen worktop, the supplied foam gasket must be attached to the lower side of the glass ceramic (glass) cooking hob (see fi gure above).
243971 empty and no objects may be stored or kept there. • Rear side of the kitchen element must also have a 140 mm high opening along the entire width of the element, and the front part must have an opening of no less than 6 mm.
243971 • The connection should be selected in accordance with the declared charge capacity of the mains and the fuse power . • Such appliances are allowed to be mounted on one side next to a high kitchen cabinet, the height of which may exceed that of the appliance.
WE RESERVE THE RIGHT TO AL TER THE SPECIFICA TIONS WITH NO INFLUENCE T O THE OPERA TION OF THE APPLIANCE. 243971 T echnical information Rating plate A Serial number B Code C Model D T ype E T rademark.
SIVK - ORA ITO 243971/en (04-10).
Een belangrijk punt na aankoop van elk apparaat Gorenje IT640-ORA-W (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gorenje IT640-ORA-W heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gorenje IT640-ORA-W vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gorenje IT640-ORA-W leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gorenje IT640-ORA-W krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gorenje IT640-ORA-W bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gorenje IT640-ORA-W kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gorenje IT640-ORA-W . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
