Gebruiksaanwijzing /service van het product XP-K7V400 van de fabrikant AMD
Ga naar pagina of 22
M - 040502 XP-K7V400 AMD Socket A Processor Motherboard User's Manual.
Motherboard XP-K7V400 Jun. 18, 2004 Jun. 18, 2004 XP-K7V400 Motherboard Copyright Declaration © 2004 Gigatrend Technology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend Technology.
Contents Motherboard Layout ........................................................................ 4 1. Production Introduction ............................................................. 5 1.1. Feature Summary ....................................
4 English Motherboard Layout CODEC KB_MS COMA LPT GAME PORT USB LAN F_AUDIO LINE_OUT LINE_IN MIC_IN XP-K7V400 SOCKET A CPU_FAN ATX CD_IN VIA KT400A BIOS AGP COMB FDD F_USB1 BATTERY IT8705F IDE1 VIA 82.
English 5 CPU Socket A for AMD Athlon TM XP/Athlon TM /Duron TM processor 333/266MHz FSB Supports 1.4GHz and faster Chipset North Bridge: VIA KT400A South Bridge: VIA VT8235 Memory 3 184-pin DDR DIMM sockets, support up to 3GB DRAM (Max) Supports DDR400/DDR333/DDR266 DIMM Supports only 2.
6 English 1.2. I/O Back Panel and Connectors & Jumper Setting 1.2.2. Connectors & Jumper Setting FDD (Floppy Disk Drive Connector) The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the connector.
English 7 CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector) The CPU_Fan power connector provides the largest amount of power to the CPU fan at 600mA. You can connect the casing fan to the SYS_FAN connector to enhance system cooling.
8 English F_AUDIO (Front Audio Connector) Connects to the audio connector located on the front panel of the system casing (dependent on case design). When use of the front panel audio connector is required, please remove the 5-6 pin, 9-10pin jumper.
English 9 2. Hardware Installation 2.1. Installation of a Socket A CPU and Fan Sink 2 When the CPU is inserted into its position, gently press the metal lever downwards until a click is heard. Then add an even layer of heat sink paste between the CPU and fan sink for heat dissipation.
10 English 2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage. 2. Please make sure that the memory used is supported by the motherboard. 3. Memory modules have a foolproof insertion design.
English 11 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features.
12 English <F6> Gives the list of options available for each item <F7> Return to Optimized default values (not applicable to main setup screen) <F8> Enters BIOSNow ! feature <F9> Displays system information <F10> Saves settings and exits setup 3.
English 13 n Floppy 3 Mode Support Allows user to configure a Japanese standard 3 Mode floppy drive. Options: Disabled (No 3 Mode drive installed) Drive A (3 Mode Drive installed in A:) Drive B (3 Mod.
14 English 3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc. C M O S S e t up U tili t y - C op y r i gh t ( C ) 198 4 - 200 4 A .
English 15 n OnChip IDE Channel 0 Allows the user to enable or disable the first onboard IDE channel (default:Enabled) n OnChip IDE Channel 1 Allows the user to enable or disable the second onboard IDE channel (default:Enabled) n AC97 Audio Allows the user to use the onboard AC97 audio (default:Auto) n USB 1.
16 English n Onboard Serial Port 1 Allows the user to enable or disable the first onboard serial port Options: Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:3F8/IRQ4) n Onboard Seria.
English 17 C M O S S e t up U tili t y - C op y r i gh t ( C ) 198 4 - 200 4 A w a r d S o f t w a r e P o w e r M a n a g e m e n t S e t up A C P I S u s p e nd T yp e [ S 1 ( P O S )] x U S B D e v.
18 English 3.6. PnP/PCI Configuration ø This menu allows you to configure your PCI slots. You can assign IRQ's for various PCI slots. n PCI1/PCI5 IRQ Assignment Allows you to assign an IRQ for the first/fifth PCI slot.
English 19 3.7. PC Health Status ø This menu displays the current CPU temperature, the fan speeds, voltages etc. n Current Voltage(V) Vcore / DDR Vtt / +3.
20 English 3.8. Frequency/Voltage Control ø This allows user to configure CPU frequency and voltage settings. ø This section is very dangerous for inexperienced users, and therefore it is not recommended that these settings be altered. An incorrect setting can result in system instability, corrupt data, or permanent hardware damage.
English 21 3.9. Load Fail-Safe Defaults ø Use this option to reset your BIOS settings to the system defaults. You should only use this if you are encountering serious problems.
22 English 4. Driver Installation Driver installation for the Windows 98/98SE/200/ME/XP operating systems is simple. Once you insert the provided driver disks into your optical drive, the AUTORUN screen will appear. If this screen does not appear, you can use "D:setup.
Een belangrijk punt na aankoop van elk apparaat AMD XP-K7V400 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen AMD XP-K7V400 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens AMD XP-K7V400 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding AMD XP-K7V400 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over AMD XP-K7V400 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van AMD XP-K7V400 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de AMD XP-K7V400 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met AMD XP-K7V400 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
