Gebruiksaanwijzing /service van het product DTA-2198 van de fabrikant Haier
Ga naar pagina of 35
Please read this manual carefully before using this TV set and keep it for future reference. OWNER'S MANUAL COMBINED 21" TV AND D VD PLAYE R TV TV + + The Owner's Manual for the Follow .
CONTENTS Before Operation Basic operation Warning and cautions ............................................................................2 Installation ...............................................................................................3 Aerial connection.
Warning and cautions 1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire.
Battery installation Take of f the battery compartment cover. Place two AA batteries, make sure that battery polarity matches with the +/- mark inside the battery compartment. Installation Aerial connection For an optimum high quality picture, it is strongly advised that the TV set connect to an external aerial(s) using high quality coax cable.
Function buttons and external sockets Front panel of the TV set VIDEO L-AUDIO-R TV/DVD MENU V- V+ P- P+ Video R/LAudio The DVD Player Power Indicator Signal Receiver TV/DVD Switching Menu Volume up/ d.
Buttons on the remote control Stand By DVD Open/close (Not available) Scan Mute Former Program Call Screen Display Program Number (Not available) TV/AV Exchange Digital Selector TV/DVD Volume/Channel .
Switching on/ off the TV set In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained. Switching on/ off the TV set Switching on/ off the TV set 1 Please press the power switch to switch on AC power supply and the power indicator will light.
Watching TV Watching TV program You can watch T V program in a preset channel. How to select TV program Select the desired program Select the desired sound 1 Using "Program number" buttons 2 Using the P+/- buttons Press the P+ button to select a channel number in number direction.
Watching TV continued Swap function enables quick swap to the last watched program. Auto scan function enables automatic successive scanning of all the programs in memory with (each channel will last about 2 seconds).
Searching channel This TV set has three methods to set the channels, which are respectively full automatic, semi automatic and manual fine tune. - In this section, how to use the remote control to set the channel is explained. Y ou can also use the buttons on the TV set to set channel.
Searching channel Continued Semi-automatic search Semi-automatic search 1 Press the P+/- buttons or PROGRAM NUMBER 0-9 buttons to choose desired channels I.E. channel 1 2 Press the TUNE menu button , till the TUNE menu shown on the right display on the screen.
Searching channel Continued Manual fine tune Manual fine tune 2 Press the MENU menu button , till the TUNE menu shown on the right display on the screen. 3 buttons to select " FINE TUNE". Press the P+/- 4 Press the V-/+ buttons all through to carry out fine tune, till the best picture and sound are obtained.
Searching channel Continued Program skip Program skip The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the P+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote control.
Multiple picture modes How to select picture modes You can quickly select the desired picture mode from four preset modes and one customized mode. Convenient picture and so und control functions Press the P .STD button to select the desired picture quality.
Black stretch and noise reduce Convenient picture and so und control functions Continued How to select BLACK STRETCH How to select NOISE REDUCE 1 Press the MENU menu button , till the menu shown on the right display on the screen. PICTURE 1 Press the MENU m enu button, till the menu shown on the right displa y on the screen.
Convenient picture and so und control functions Continued MUTE Sound mute 1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off. 2 If you want to recover the sound, press the MUTE button again or directly press the V -/+ buttons.
On/off timer Clock setting Time functions Clock setting and timer on/off functions 1 Press the TIME button, and the TIME menu display on the screen. menu 2Press the P .
Sleep timer and program preset Sleep timer REMIND PROG function The TV set have 18 sections option (each section has a time interval of 10 minutes) for sleep timer function (See right chart): 0 10 20 170 180 1 Press the TIME button, and the TIME menu display on the screen.
P+ P- V- V+ MENU NO SIGNAL Set up function Screen saver and childlock functions How to start screen saver function When the BACKGROUD function is ON, the screen will turn automatically as shown "NO SIGNAL" of moving ( black background). 1 Press the MENU menu button , till the menu shown on the right display on the screen.
P+ P- V- V+ MENU P+ P- V- V+ MENU AVL and calendar functions Set up function Continued 1 Press the MENU menu button till the FUNCTION menu , shown on the right display on the screen.
Fade Fade Set up function Continued 1 Press the MENU menu button , till the menu shown on the right display on the screen. FUNCTION 3 Press the . V- /+ b utton to turn the F ADE function "ON".
P+ P- V- V+ MENU P+ P- V- V+ MENU P+ P- V- V+ MENU Position exchange functions Exchange Exchange EXCHANGE PROGRAM 1 6 PROGRAM 2 9 EXCHANGE 1 Press the MENU button again (6 times) till the EXCHANGE , menu display on the screen. 2 Press the V / buttons or the PROGRAM NUMBER 0-9 buttons to set PROGRAM 1 T O 6.
Basic Playback Preparations Press the TV button on the remote control or the TV to turn on the DVD player. / DVD 1. Press OPEN/CLOSE to open the disc tray, place a disc on the disc tray. There are two different disc sizes. Place the disc in the correct guide on the disc tray.
Advanced Playback PROGRAM When playing discs, press "PROGRAM" to enter program mode. Starting with program number "01" highlighted, press the digit buttons to select the title and chapter number that you want. When finished move the cursor to select "ST ART" .
When a disc containing standard JPEG picture files is inserted into the player, a navigation menu will be displayed automatically . Use the UP and DOWN cursor buttons to select a file then press PLA Y/ENTER. The slide show will commence. Press PREVIOUS or NEXT to move between pictures.
DVD System Setup DVD System Setup General Setup Process General Setup Page When using the DVD with the internal TV , select 4 3/LB. The following information applies only when the DVD output is connected to an external TV .
DVD System Setup(Continued) DVD System Setup General Setup Page CAPTIONS: This functionallows you to display or hide the caption. SCREEN SAVER: If the screen saver is on,then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes .
The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. DVD System Setup(Continued) DVD System Setup Preference Page TV TYPE: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems.
DVD System Setup(Continued) DVD System Setup DEFAUL T : Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. Note: Some functions may not be available depending on the type of disc.
The following discs can be played: Playable Discs You cannot play discs other than those listed above. You cannot play discs of non-standardized discs, even if they may be labelled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning.
Disc Protection and DVD Characteristics Compare DVD disc with other discs: DVD LD SVCD VCD CD Encode method Digital/MPEG Analog Digital Digital/ MPEG Digital Capacity 650MB 650MB 650MB 133 minutes 242.
Connecting the TV set to the other video and audio equipment Connecting to the other video and audio equipment You can connect a stereo to the AUDIO output terminals on the TV set to enjoy sounds of higher quality. VIDEO and AUDIO output terminals output the video and audio signals being monitored by the TV set.
Troubleshooting guide T o assist in location possible faults use help guide below . BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Ensure that the power supply is connected to the TV set and turned on.
Specifications Specifications The specifications offered you here are only for reference and, with the improvement of the products ,there may be some different between the description and the practicality.
01 0090504963.
Een belangrijk punt na aankoop van elk apparaat Haier DTA-2198 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Haier DTA-2198 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Haier DTA-2198 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Haier DTA-2198 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Haier DTA-2198 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Haier DTA-2198 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Haier DTA-2198 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Haier DTA-2198 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
