Gebruiksaanwijzing /service van het product HWM60-20B van de fabrikant Haier
Ga naar pagina of 18
Full Automatic W ashing Machine User ' s manual This manual is for Please read this manual carefully before using. Retain it for future reference.
1/15L 2/18L 3/23L 4/26L 5/28L 6/31L 7/33L 8/35L 9/38L 10/42L Specifications.....................................................................................the 2 nd cover Names of the parts..........................................................
Liquid detergent inlet 1 Names of the par ts T op lid Detergent box Control panel (Installed by user) Lint filter Filter cover Pulsator Control panel film Cabinet Inner tub Power line Water valve W at.
2 Safety precautions Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or nip it with weight. If the power cord or the power plug is bad, or the power plug becomes flexible, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department.
3 Safety precautions Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine.
4 Installa tion and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
5 How to change the direction of the drain hose 1.Dismantle the ba ck cover of the washing machine. 3.Dismantle the protecting cover of the drain outlet at the other side (method the same as the bushing). Install the bushing as per indicated in Figure 4.
6 Water tap,suitable Water tap,not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. 3. Loosen the screw till the water tap can be accessed.
7 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer . 3.Fasten the nut.
8 Pr eparation bef or e washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise.
9 Liquid whitener inlet Control panel seat See to the manual o f s oftener for the usage and dosage. Do not leave the softener fo r long period after a dding it into the box. O therwise it may be solidified and block the inlet. As the softener is easy t o s olidify , p lease c lean the box frequently .
Procedure button Program button Push it to select one or more programs from SOAK WASH RINSE and SPIN Reserve button Water level button Push the button to select washing finishing time between 2-24 hours. Push the POWER ON/OFF POWER ON/OFF button to switch on the power.
1 Push the "POWER ON/OFF " button to switch on the power . POWER ON/OFF 3 Push the PROCEDURE button to select suitable procedure. 11 SPIN WASH RINSE SOAK ST ANDARD GENTLE HEAVY FAST POWER ON.
Even there's no water in the tub, a certain period is required before spin starting. Do not use the soak program for the woolen textiles. Separate the laundries that are not colorfast from other laundries in washing.
• •• RESERVE SURPLUS (MIN) RESERVE(HOURS LATER) 13 Push the "reserve" button to select suitable reserve wash program After switching on the power, th e reserve program is set to off mode automatically .
Clean the detergent box and set it on the control panel seat. The method of dismantle : Push it up aslant and gently . The method of install : install it upwards and aslant and push it in . 14 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc.
The pulsator pauses during water filling in washing and rinsing. It is to avoid splashing during water filling. 15 Reorder the laundries. Close the top lid.
16 User's manual Components of the water inlet hose Bottom plate T apping screws One One One Seven One Full automatic washing machine Packing list Lint filter One Guarantee One Name Quantity.
Een belangrijk punt na aankoop van elk apparaat Haier HWM60-20B (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Haier HWM60-20B heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Haier HWM60-20B vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Haier HWM60-20B leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Haier HWM60-20B krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Haier HWM60-20B bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Haier HWM60-20B kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Haier HWM60-20B . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
