Gebruiksaanwijzing /service van het product XQG50-11 van de fabrikant Haier
Ga naar pagina of 29
® What The W orld Comes Home To TM Front Load Clothes Washer & Dryer Combo XQG50-11 WATER SAVER NO SPIN ON/OFF User Manual- Guide de l’Utilisateur - Manual del Usuario- Model # Modèle Modelo #.
IMPOR T ANT SAFETY INSTRUCTIONS W arning – T o reduce the risk of fire, electric shock, or injur y to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. 2. Use this appliance only for its intended purpose as described in this use and care guide.
2 20. This appliance must be connected to proper electrical outlet with the cor r ect electrical supply . 21. Proper grounding must be ensured to reduce the risk of shock and fire.
3 Thank you for purchasing our Haier product. This easy-to-use manual will guide you in getting the best use of your washer & dryer combo unit. Remember to record the model and serial number. They are on a label in back of the unit. Model number Serial number Date of purchase Staple your receipt to your manual.
T able Of Contents P AGE SAFETY INSTRUCTIONS .................................................................... 1 OPERATING INSTRUCTIONS ............................................................ 4 Parts and Features...............................
XQG50-11 WATER SAVER NO SPIN ON/OFF ® 5 English 1. Wash Cycle Selector Knob 2. Dry Cycle Select Knob 3. Power "On" Indicator Light 4. Power "On/OFF" Button 5. No Spin Selector Button 6. W ater Saver Button 7. Detergent/Softener Dispenser 8.
English 1. Water Inlets (Hot/Cold) 2. Power Cord (115 V / 60 Hz) 3. Drain Hose 4. Rear Adjustable Leveling Legs 5. "U " Clamp 6. Hose Retainer Clips 6 2 3 4 1 6 5 XQG50-11 Manual 10/29/02 1:.
Power Button: • Push the button in to have your washer "ON". The light will turn on indicating that power is "ON". Push the button out to have your washer "OFF". The light will go off indicating that power is "OFF".
English 8 W ash Cycle T urn the knob CLOCKWISE only to your desired setting when selecting the cycle. Below is the cycle reference chart for your clothes. Follow the steps below to select the proper cycle: 1. Select proper cycle. 2. T urn the knob clockwise.
Cotton Cycle: Pre-Wash Cycle: The purpose of this cycle is that if you want to pre-wash heavily soiled clothes before the actual wash cycle begins. This cycle is configured in such a manner that it will go through Intense Normal Delicate wash cycles time mode and then the rinse and spin cycles automatically to complete the wash.
English 10 W ool Cycle: Delicate Wash Cycle: This cycle is used for delicate fabrics that are often washed by hand. This cycle is approximately 32 minutes. • After the wash position of the cycle is complete (at "Soak" indication on control panel) the machine will stop.
11 English T emperature The water temperature is preset so when you select wash cycle it will set the proper temperature for that wash load. Please see the chart below to understand the proper tempera.
Proper Use of Dispenser: The detergent/softener dispenser is located on the upper left corner of the washer . Open the dispenser by pulling it out. You will see that there are four compartments. "1" Compartment: This is used for liquid detergent for pre-wash.
13 English Proper Use of Detergent: Low-Susding is recommended for front load style washers. This type of detergent prevents damage to your washing machine; which may be caused by excess amount of suds entering the condensing compartment.
English 14 Note: For full loads, you may want to remove 1 / 3 to 1 / 2 of the load and dry the r emaining clothes seperately. This will be an efficient way to dry your clothes and will not take as long to dr y . For less than full loads, you may want to r educe drying time.
15 English Button Trap • Button Trap is designed to collect small objects such as button, coins, etc. As this may happen very rarely, we recommend to check trap no more than twice a year . • Button trap is located on the bottom front right corner behind the small door cover.
English 16 Warning: Always unplug your appliance to avoid electric shock before cleaning. Ignoring this warning may result in death or injur y . Before using cleaning products, always read and follow manufacturer’s instructions and warnings to avoid personal injury or product damage.
17 English Moving & Vacationing • T urn off water supply faucets and disconnect hoses. Drain water from all hoses. This will prevent from damaging due to water leakage if the hoses accidentally get r uptured or they become loose. • Disconnect electrical plug.
English 18 Washer does not operate: • Check if unit is plugged in. The plug may have come loose. • Check if the electrical wall receptacle is of proper voltage. • Check if the circuit breaker needs to be reset or if the fuse needs to be replaced.
19 English W asher is making noise: • Washer may need to be reinstalled. (Check washer installation section) • Washer load may need to be re-balanced, as the load may be uneven. • Coins, loose change, buttons or other heavy objects could make noise (read Operating Guide – Normal Operating Sounds).
English Dryer is working but not drying the clothes: • Unit may be over loaded. The dryer drum should only be half full. • Dryer load needs to be resorted. Heavy clothes may need to be separated from regular clothes. • Bulky clothes may require repositioning.
21 English INSTALLATION INSTRUCTIONS T ools and Materials Required Y ou will need to have following tools to help you in the installation of your Washer: • Scissors • Phillips Screwdriver • Standard Screwdriver • Pliers • Wrench • Tape Measur e • Gloves • Level Accessories Supplied Quantity 1.
English 22 Unpacking Your Appliance • Remove all packing materials including transportation bolts and brackets. Also r emove adhesive tape holding the accessories inside and outside. • Inspect and remove any remains of packing, tape or printed materials before using the washer.
23 Leveling Your Appliance • Y our washer has 4 leveling legs; which are located on the four bottom corners. After properly placing your washer in its final position, you can level your washer . • Leveling legs can be adjusted by turning them counterclockwise to raise your washer or turning them counter clockwise to lower your washer .
24 2. Connect the hot and cold water inlet hoses to the hot and cold water faucets respectively . 3. Connect the other end to their respective washer inlet located at the rear . Note: Hot water needs to be at a temperature of at least 120˚F – 140˚F .
25 English (Route Drain Hose through Clip) Note: Inspect carefully for any leaks around and back of the machine. If leak occurs, double check to see if any connections are loose. You may need to tighten any loose connections. 5. Plug in the Washer to a regular 115 volt / 60 Hz, 15 amp outlet.
26 Grounding Instructions This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric cur r ent. This appliance is equipped with a cord having a grounding wire with a grounded plug.
Limited Warranty 27 In Home Service Full ONE Year Warranty For 12 months from the date of original retail purchase, Haier will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship.
XQG50-11 Issued: September 02 IMPORT ANT Do Not Return This Product To The Store If you have a problem with this product, please contact the "Haier Customer Satisfaction Center" at 1-877-337-3639.
Een belangrijk punt na aankoop van elk apparaat Haier XQG50-11 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Haier XQG50-11 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Haier XQG50-11 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Haier XQG50-11 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Haier XQG50-11 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Haier XQG50-11 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Haier XQG50-11 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Haier XQG50-11 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
