Gebruiksaanwijzing /service van het product 4200 van de fabrikant Hand Held Products
Ga naar pagina of 20
™ IMAGETEAM™ 4200 Hand Held Linear Imager Quick Start Guide.
Disclaimer Hand Held Products, Inc. (“Hand Held Pr oducts”) reserves the right to make changes in specifications and other in formation contained in this document without prior notice, and the reader sh ould in all cases consult Hand Held Products to determine whether any su ch changes have been made.
i Table of Contents Getting Started IT4200 with Green LED Aimer Imager Identification ............................................................. 1 Connecting the Imager for USB .............................................. 3 USB Interface Selection .
ii.
IMAGETEAM™ 4200 Quick Start Guide 1 Getting Star ted IT4200 with Green LED Aimer Imager Identification.
2 IMAGETEAM™ 4200 Quick Start Guide Reading T echniques The imager has a view finder that projects a bright red or green aiming beam that corresponds to the imager’s ho rizontal field of view. The aiming beam should be centered over the bar code, but it can be positioned in any direction for a good read.
IMAGETEAM™ 4200 Quick Start Guide 3 Connecting the Imager for USB A imager can be connected to the USB port of a computer. 1. Connect the appropriate inte rface cable to the imager. 2. Connect the other end of the cable to the computer. Note: The cable must be connected at the imager end (1) before the PC (2) end is connected.
4 IMAGETEAM™ 4200 Quick Start Guide Connecting Imager for Keyboard W edge (Powered by Host) A imager can be connect ed between the keyboard and PC as a “keyboard wedge.” The following is an exampl e of a keyboard wedge connection: 1. Turn off power to the terminal/computer.
IMAGETEAM™ 4200 Quick Start Guide 5 Connecting the Imager for RS-232 Serial Port (External Power) 1. Turn off power to the terminal/computer. 2. Connect the appropriate in terface cable to the imager. 3. Plug the serial connector into the serial port on your computer.
6 IMAGETEAM™ 4200 Quick Start Guide Useful Menu Bar Codes Manual/Serial T rigger Mode Presentation Mode Suffix Selections Resetting the S t andard Product Defaults Manual/Serial Trigger Presentation.
IMAGETEAM™ 4200 Quick Start Guide 7 T o Add a T est Code I.D. Prefix to All Symbologies Beeper and LED Sequences and Meaning Repairs User repairs and/or upgrades are not to be performed on th is product. These services are to be performed onl y by an authorized service center.
8 IMAGETEAM™ 4200 Quick Start Guide The imager’s housing may also be cleaned the same way. Inspecting Cords and Connectors Inspect the imager’s interface cable and connector for wear or other signs of damage. A badly worn cable or damage d connector may interfere with imager operation.
IMAGETEAM™ 4200 Quick Start Guide 9 T o Replace the IT4200 Interface Cable: 1. Turn the power to the host system OFF. 2. Disconnect the imager’s cable from the terminal or computer. 3. Locate the small hole on the side of the imager’s handle. This is the cable release.
10 IMAGETEAM™ 4200 Quick Start Guide You need to program a suffix. Programming a suffix enables the imager to output the bar code data plus the key you need (suc h as “CR”) to enter the data into your application. The imager won’t read yo ur bar code at all.
IMAGETEAM™ 4200 Quick Start Guide 11 T echnical Support If you need assistance installing or trou bleshooting your imager, please call your Distributor or your Hand Held Pr oducts, Inc. technical support office: Asia Pacific: Telephone: Int+852-3188-3485 or 2511-3050 E-mail: aptechsupport@handheld.
12 IMAGETEAM™ 4200 Quick Start Guide Patents Please refer to the product pa ckaging for patent information. Solids and W ater Protection The IT4200 has a rating of IP41, immunity of foreign particles and dripping water. Limited W arranty Hand Held Products, Inc.
IMAGETEAM™ 4200 Quick Start Guide 13 OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HAND HELD PRODUCTS FOR THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HAND HELD PRODUCTS MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, OR DAMAGES.
14 IMAGETEAM™ 4200 Quick Start Guide.
.
4200-QS Rev A 9/05 Hand Held Products, Inc. 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208.
Een belangrijk punt na aankoop van elk apparaat Hand Held Products 4200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Hand Held Products 4200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Hand Held Products 4200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Hand Held Products 4200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Hand Held Products 4200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Hand Held Products 4200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Hand Held Products 4200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Hand Held Products 4200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
