Gebruiksaanwijzing /service van het product DT06-10A1 van de fabrikant HANNspree
Ga naar pagina of 59
TV M CH CH NTSCTVTWEN1203 MAC-001018 Based on the "Winnie the Pooh" works by A.A. Milne and E.H. Shepard. User's Manual 9.6" Liquid Cr ystal Display T ele vision DT06-10A1 2F , No.362, Jui-Kuang Rd., Neihu District, T aipei City 1 14, T aiwan, R.
Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..............................
Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............ ... 2 8 Brightness ............................................................ ... 2 9 Contrast ............................................................... ... 3 0 Video Setting .
3 The instructions on this manual are for the model(s) listed on the front cover . Before you st art reading, check your product number by looking at the rear of your TV .
4 This manual is designed to assist users in setting up and using the LCD TV . Information in this document has been carefully checked for accu- racy; however , no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connects to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in ca se the product needs to be shipped in the future.
8 Optimal V iewing Dist anc e 102 cm T V M CH CH.
9 Import ant Safety I nstructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus n ear water . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings.
10 10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point wh ere they exit from the appar atus. 1 1. U se only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Inst allation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from power trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any o ther power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must a ccept any interference received, including inter ference that may cause und esired operation.
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for radio no ise emissions from digital app aratus as set out in the Radio Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this Liquid Crysta l Display TV . Y our LCD TV is designed to be safe, versatile, and easy to use. The design of the prod- uct is based on the “Winnie the Pooh” , which makes it a fun addi- tion to any room.
17 Make sure the following component s are included in the b ox. Contact your vendor immediately if any thing is missing or damaged. TV TV M CH CH User ’ s Manual Quick St art Guide Wire Material Pa.
18 Fr o n t V i e w Description Function 1 Power LED/ Power T urns the T V on and off. Red LED in di - cates power in st andby mode. 2 Menu T urns the On-Screen Display (OSD) menus on and of f. 3 TV/A V Selects the input source to be displayed (TV , A V1, or A V2).
19 Input and Output P or ts Description Function 1 Left and right audio in (of A V1) Connects to VCR/VCD/DVD p layer CVBS RCA left and right audio cables (white and red). 2 DC-IN Connects to the included power adapter . 3 Headphone line out Connects to head phones or other audio device.
20 Connecting to an An tenna/Cable TV 1. Connect one e nd of the VHF/UHF (Antenna) or CA TV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV . 2. Connect the other end of the VHF/UHF (Antenna) or CA TV cable to the Antenna socket or CA TV cable.
21 Connecting to A V De vices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1 and A V2 port s on the back of the TV . Connecting to a VCR, VCD or DVD Player The illustration presented here shows how to connect your TV to a VCR, VCD or DVD player .
22 Connecting to a Video Camera The illustration presented here shows how to connect your TV to a camcorder or other type of digit al camera. Actual connections vary according to the make and model o f the device. Note The cables are co lor-coded (black, red, white, yellow).
23 Connecting Exter nal Speak ers and Headphones Headphones or externa l speakers may be used to listen to the TV instead of the built-in speakers. Connect your h eadphones to the speaker/head phone line out port as illustrated. Notes • External speakers or headphones are not included with the product.
24 Connecting the P o wer Adapter 1. Connect the power cord to t he power adapter as illustrated. 2. Plug the power adapter connector into the DC-IN on the rear p anel of the TV . 3. Insert the three-pronged plug at the other end of the powe r cord into a powe r outlet.
25 Using the R emote Control For best results, use the remote control within a dist ance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration.
26 T ur ning the TV On and Off 1. Press the POWE R button; the power indicator LED chang es from red to green, indicating that the power has been turn ed on. 2. Press the POWE R button again; the power indicator LED changes from green to red, indicating that the TV is in standby (of f) mode.
27 Switching Source Signals Press the SOURCE button on the remote control or the TV button on the control p anel to select the incoming source signal. The current source setting CH xx appears on the top lef t corner of the screen; A V1 or A V2 appears on the bottom right corner of the screen.
28 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapt er describes how to change each of the available settin gs. The OSD can be used with either the remote contro l or the front con- trol panel.
29 Brightness 1. Press MENU to enter the OSD menus. 2. Press the CH UP button or CH DOWN button t o s e l e c t B r i g h t n e s s . 3. Press MENU . The brightness slide bar is highlighted. 4. Press the CH UP button to increase the brightness. 5. Press the CH DOWN button to decrease the brightne ss.
30 Contrast 1. Press MENU to enter the OSD menus. 2. Press the CH UP button or CH DOWN button t o s e l e c t C o n t r a s t . 3. Press MENU . The contrast slide bar is highlight ed. 4. Press the CH UP button to increase the contrast. 5. Press the CH DOWN button to decrease the contr ast.
31 Video Setting Press the MENU button to enter the OSD Main Menu screen. 1. Press the CH UP button o r CH DOWN button t o s e l e c t Vi d e o Setting.
32 Hue 1. Press the CH DOWN button or CH UP button t o s e l e c t H u e . 2. Press MENU to enter the Hue sub - menu. 3. Press the CH UP button to increase green and decr ease red. 4. Press the CH DOWN button to decrease green and increase red. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
33 Saturation 1. Press the CH DOWN button o r CH UP button to select Saturation. 2. Press MENU to enter t he Saturation submenu. 3. Press the CH UP button to increase the saturation. 4. Press the CH DOWN button to decrease the satur ation. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
34 Sharpness 1. Press the CH DOWN button o r CH UP button to select Sharpness. 2. Press MENU to enter the SHARP - NESS submenu. 3. Press the CH UP button to increase the sharpness. 4. Press the CH DOWN button to decrease the sharpn ess. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
35 Color T emperature 1. Press the CH DOWN button o r CH UP button to select Color T emp. 2. Press MENU to enter the Color T em - perature submenu. Ther e are three default color temperatures to choose from. St andard Color Press the CH DOWN button or CH UP button to select S tandard, then press MENU .
36 Audio Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH UP button o r CH DOWN button to se lect Audio Setting. 2. Press MENU to enter the Audio Setting menu.
37 Tr e b l e 1. Press the CH DOWN button o r CH UP button to select T reble. 2. Press MENU to enter the treble submenu. 3. Press the CH UP button to increase the treble. 4. Press the CH DOWN button to decrease the treble. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
38 Bass 1. Press the CH UP button o r CH DOWN button to select Bass. 2. Press MENU to enter the Bass sub - menu. 3. Press the CH UP button to increase the bass. 4. Press the CH DOWN button to decrease the bass. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
39 Balance 1. Press the CH DOWN button o r CH UP button to select Balance. 2. Press MENU to enter the Balance sub - menu. 3. Press the CH DOWN button to shift the balance to the left speaker . 4. Press the CH UP button to shift the balance to the right speaker .
40 Mute 1. Press th e CH DOWN button o r CH UP button to select Mute. 2. Press MENU to enter the Mute sub - menu. 3. Press the CH UP button to turn the mute of f. 4. Pr ess the CH DOWN button to turn the mute on. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
41 Note The setting menu is available when current select source is TV . TV Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH UP button o r CH DOWN button to se lect TV Setting.
42 TV/CA TV 1. Press the CH DOWN button o r CH UP button to select TV/CA TV . 2. Press MENU to enter t he TV/CA TV submenu. Receiving Cable TV Press the CH UP bu tton to select CA TV , then press MENU . Receiving Broadcast TV Press the CH DOWN button to select TV , then press MENU .
43 MTS 1. Press the CH DOWN button o r CH UP button to select MTS. 2. Press MENU to enter the MTS sub - menu. Select from the following options. MAIN Press the CH DOWN button or CH UP button to select MAIN. A green dot appears and MAIN is hig hlighted in yel - low .
44 Auto Program 1. Press the CH DOWN button o r CH UP button to select Auto Program. 2. Press MENU to enter the Auto Pro - gram Setting submenu. 3. Press the CH DOWN button o r CH UP button to select ON or OFF and press MENU . The screen shows “ Auto Program.
45 Manual Program 1. Press the CH DOWN button o r CH UP button to select “Manual Program”. 2. Press MENU to enter the Manual Pro - gram submenu. 3. Press the CH DOWN button an d the CH UP button to find the channel you want to add. Press MENU to select the channel.
46 Channel Add/Erase 1. Select the channel you want to add or delete, for example, Channel 28. 2. Press the CH DOWN button or CH UP button to select CH. Add/Erase. 3. Press MENU to enter the Channel Add/Erase submenu. Select from the following options.
47 Favorite Ch annels 1. Press the CH DOWN button or CH UP button to select Favorites CH. Edit. 2. Pr ess MENU to enter the Favorites CH. Edit submenu. 3. The screen displays the four favor - ite channels: M1, M2, M3, and M4. 4. Press the CH DOWN button a n d the CH UP button to select th e channel number you want to set for M1.
48 Miscellaneous Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH UP button the CH DOWN button o r to select Miscellaneous Setting.
49 Language 1. Press the CH DOWN button o r CH UP button to select Language. 2. Press MENU to enter the Language submenu. 3. The screen displays the available OSD languages: English and T -Chinese (T raditional Chinese). 4. Press the CH DOWN b u t to n and the CH UP button to select a language.
50 Sleep Timer The sleep timer turns the TV of f automatically af ter a set period of time. 1. Press the CH DOWN button o r CH UP button to select Sleeper . 2. Press MENU to enter the Sleeper sub- menu. 3. The screen displays the available sleep timer setting: Off, 30, 60, 90, and 120 minutes.
51 OSD Display This setting allows you to set th e amount of information that appears on the LCD screen when the DISPLA Y button is pressed. Y ou can choose from three settings: Of f, Portion, or All. 1. Press the CH DOWN button o r CH UP button to select OSD Dis play .
52 Time Setting This section shows you how to change your TV’ s clock setting. 1. Press the CH DOWN button o r CH UP button to select T i me Setting. 2. Pres s MENU to enter th e T ime Setting submenu. 3. The screen displays the current set- ting. The hour is highlighted in yellow .
53 Re se t The Reset function returns all of your TV’ s user settings to their fac- tory defaults. W arning: The reset function erases all of yo ur custom and favorite channel set- tings, and will reset all display settings (such as cont rast, brightness, etc.
54 T urn the power of f before you be gin cleaning the TV. Use a clean lens cloth to remove dust and finger- prints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoi d the damaging the finish. Wipe the shell with a dry soft cloth a nd use neutral cleaning flu ids.
55 Situation Solution No picture and sound. • Connect the power cord prope rly . • Press the POWER button on the control panel or remote control. • Press the TV button to cycle through connected video sources. • Press the CH UP button or CH DOWN button to switch to other TV stations.
56 No sound but have image. • Make sure the source device is functioning properly . • Set the volume to a higher level. • Make sure the audio cable is connected securely . • T urn the mute off. Screen image turns over . • Make sure the video si gnal cable is connected properly .
57 Item Specifications DT06-10A1 LCD Panel Size 9.6-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600(vertical) Maximum Display Area 194.
58 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevisi on, the original name for cable TV .
Een belangrijk punt na aankoop van elk apparaat HANNspree DT06-10A1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HANNspree DT06-10A1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HANNspree DT06-10A1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HANNspree DT06-10A1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HANNspree DT06-10A1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HANNspree DT06-10A1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HANNspree DT06-10A1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HANNspree DT06-10A1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
