Gebruiksaanwijzing /service van het product 90003 van de fabrikant Harbor Freight Tools
Ga naar pagina of 16
6” BENCH GRINDER Model 90003 ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at: http://www .
PRODUCT SPECIFICA TIONS SA VE THIS MANUAL Y ou will need this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures, parts list and as- sembly diagram. Keep your invoice with this manual.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. ELECTRICAL SAFETY 4.
11 . Dress properly . Do not wear loose clothing or jewelry . Contain long hair . Keep your hair , clothing, and gloves away from moving parts. Loose clothes, jewelry , or long hair can be caught in moving parts. 12. A void accidental starting. Be sure the Power Switch is off before plugging in.
22. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’ s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. 23. Use only accessories that are recommended by the manufacturer for your model.
15. Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may af fect the safe operation of this product. Replace or repair damaged or worn parts immediately .
22. Always turn off the Bench Grinder and unplug it from its electrical outlet before changing accessories or performing any inspection, mainte- nance, or cleaning procedures. 23. W ARNING! The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur .
FIGURE A SKU 90003 P AGE 8 2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’ s grounding system and must never be attached to an electrically “live” terminal.
SKU 90003 P AGE 9 EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord.
SKU 90003 P AGE 10 SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. V olts Alternating Current Amperes No Load Revolutions per Minute (RPM) n o xxxx/min. A V ~ UNP ACKING When unpacking, check to make sure all the parts shown on the Parts List on page 15 are included.
SKU 90003 P AGE 1 1 3. Repeat Steps #1 and #2 to attach the Right T ool Rest (part #32) to the Right Wheel Guard (part #31). (See Figure D.) LEFT WHEEL GUARD (#27) RIGHT WHEEL GUARD (#31) RIGHT TOOL REST (#32) LEFT TOOL REST (#28) SCREW WITH LOCK W ASHER (#25) FIGURE D T o Attach The Spark Guards: 1.
SKU 90003 P AGE 12 T o Attach The Eye Shield Mounting Rods: 1. Insert one Screw (part #48) with a W asher (part #13) through a Bracket (part #36) and the Left Eye Shield Mounting Rod (part #49). Then, firmly tighten the Screw to secure the Left Eye Shield Mounting Rod to the body of the Bench Grinder .
SKU 90003 P AGE 13 LEFT EYE SHIELD MOUNTING ROD (#49) RIGHT EYE SHIELD MOUNTING ROD (#33) SCREW (#55) SCREW (#55) PRESSURE PLA TE (#50) PRESSURE PLA TE (#50) FIGURE G 2. There are two 1 1/32” diameter mounting holes located on the Base (part #15) of the Bench Grinder .
SKU 90003 P AGE 14 OPERA TING INSTRUCTIONS 2. Plug the Power Cord Plug (part #10) into the nearest grounded, 120 volt, electri- cal outlet. Then, turn the Power Switch (part #3) to its “ON” position and allow the Grinding Wheels (part #64) to spin up to full speed.
SKU 90003 P AGE 15 P ARTS LIST NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. SKU 90003 P AGE 16 ASSEMBL Y DIAGRAM 26 58 57 58 52 53 54 50 51 55 48 36.
Een belangrijk punt na aankoop van elk apparaat Harbor Freight Tools 90003 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Harbor Freight Tools 90003 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Harbor Freight Tools 90003 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Harbor Freight Tools 90003 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Harbor Freight Tools 90003 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Harbor Freight Tools 90003 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Harbor Freight Tools 90003 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Harbor Freight Tools 90003 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
