Gebruiksaanwijzing /service van het product 98198 van de fabrikant Harbor Freight Tools
Ga naar pagina of 27
18" DRUM SANDER 98198 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 2 CONTENTS IMPORT ANT SAFETY INFORMA TION ............................ 3 GENERAL POWER T OOL SAFETY W ARNINGS....................... 3 DRUM SANDING OPERA TIONSAFETY W ARNINGS . 5 GROUNDING .
SKU 98198 For technical questions, please call 1-800-444-3353. Page 3 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 4 plugs with grounded power tools. Unmodied plugs and matching out - lets will reduce risk of electric shock. A void body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 5 Do not use the power tool if the b. switch does not turn it on and off. Any power tool that cannot be con - trolled with the switch is dangerous and must be repaired. Disconnect the plug from the c.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 6 generated by your operation. Pro- longed exposure to high intensity noise may cause hearing loss. Keep bystanders a safe distance 5. away from work area. Anyone entering the work area must wear personal protective equipment.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 7 SA VE THESE INSTRUCTIONS. GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 8 - tories, Inc., the Canadian Standard Association, and the National Electri- cal Code.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 9 SPECIFICA TIONS Maximum Stock Width 18" (36” two passes) Sanding Motor .
SKU 98198 For technical questions, please call 1-800-444-3353. Page 10 with two M8-1.25 x 15 Carriage Bolts (268) and Flanged Nuts (269). Do not tighten the screws to the c.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 1 1 W ork Piece and Work Area Set Up Designate a work area that is clean 1. and well-lit. The work area must not allow access by children or pets to prevent injury and distraction. Route the power cord along a safe 2.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 12 Dust Bag (273) Dust Bag c. The Dust Bag (273) is secured to the Dust Chute (70) with a Collar (218). Speed adjustment. 8. The speed of the Feed Belt (165) is a. adjusted by turning the Speed Ad- justment Knob (74) while the ma- chine is running .
SKU 98198 For technical questions, please call 1-800-444-3353. Page 13 size and shape of the template will not change over time. 3" Sandpaper (179) k.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 14 T est by pressing in the middle with a moderate amount of force. T urn off the sander and un-plug the b. power cord. c.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 15 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 16 Replacing V -belts Disconnect the Drum Sander from 1. the electrical outlet. Open the Side Cover (82). 2. T o replace the variable-speed Drive 3. Belt (97), loosen the cap screw se- curing the variable-speed Pulley (26, 28) before loosening the motor mount cap screws.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 17 off and perform tracking adjustment again. The belt should no longer move to 3. one side during continuous use. The Conveyor T able (137) should not move up or back and forth Do not over tighten the Feed Belt.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 18 T o adjust the rear Pressure Plate: 5. Disconnect the power cord from the a. outlet. b.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 19 MOTOR Power ON/OFF Switch Wiring Diagram The colored wires connected to the motor are not speci- fied because they are interchangeable.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 20 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start or trips the breaker . 1.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 21 T roubleshooting Problem Possible Causes Likely Solutions Machine has vibration or noisy operation. Motor or component is loose. 1. V -belts are worn or loose. 2. Motor fan is rubbing on fan 3.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 22 Problem Possible Causes Likely Solutions Sandpaper on Drum tears during operation 1. workpiece. Sandpaper not tightened or 2.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 23 P ART P ART NAME Qty 1 SPRING W ASHER 4 2 P AN HEAD SCREW 6 3 6 4 HEX SOC HD SCR 4 5 BEARING.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 24 97 1 98 1 99 1 100 MOTOR BRACKET 1 101 .
SKU 98198 For technical questions, please call 1-800-444-3353. Page 25 193 PIN 2 194 BUSHING 2 195 .
SKU 98198 For technical questions, please call 1-800-444-3353. Page 26 ASSEMBL Y DIAGRAM.
SKU 98198 For technical questions, please call 1-800-444-3353. Page 27 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and.
Een belangrijk punt na aankoop van elk apparaat Harbor Freight Tools 98198 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Harbor Freight Tools 98198 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Harbor Freight Tools 98198 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Harbor Freight Tools 98198 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Harbor Freight Tools 98198 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Harbor Freight Tools 98198 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Harbor Freight Tools 98198 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Harbor Freight Tools 98198 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.