Gebruiksaanwijzing /service van het product AVR65 van de fabrikant Harman-Kardon
Ga naar pagina of 52
Congratulations! With the purchase of a Harman Kardon A VR65 you are about to begin many years of listening enjoyment. The A VR65 has been custom designed to provide all the excitement and detail of movie sound tracks and every subtle nuance of musical selec- tions.
Safety Information Important Safety Information V erify Line V oltage Before Use Y our A VR 65 has been designed for use with 120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.
Safety Information Cleaning When the unit gets dirty , wipe it with a clean, soft, dry cloth. If necessary , wipe it with a soft cloth dampened with mild soapy water , then a fresh cloth with clean water . Wipe dry immediately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner , alcohol or any other volatile cleaning agent.
Front Panel Controls 4 A VR65 120 volt Rev (C) 10/6/98 1 Main Power Switch 2 System Power Control 3 Power Indicator 4 Headphone Jack 5 Bass Control 6 T reble Control 7 Balance Control 8 Video 3 Inputs.
Front Panel Controls 5 A VR65 120 volt Rev (C) 10/6/98 1 Main Power Switch: Press this button to apply power to the A VR65. When the switch is pressed in, the unit is placed in a Standby mode, as indicated by the amber LED 3 sur- rounding the System Power control 2 .
Front Panel Controls & Preset Stations Selector: Press this button to select stations that have been entered into the pr eset memory . (See page 29 for more information on tuner programming.) * T une Mode: Press this button to select the stereo or mono mode for FM tuning.
Front Panel Information Display 7 A VR65 120 volt Rev (C) 10/6/98 TUNED SLEEP MONO STEREO AUTO MEMORY PRESET MUTE BYPASS ANALOG DIGITAL OPT COAX PRO LOGIC AC-3 PCM MULTI NIGHT THEATER DTS HALL 2 HALL .
Front Panel Information Display A Mute: This indicator illuminates to remind you that the A VR65’ s out- put has been silenced by pressing the Mute button Û d .
Rear Panel Connections 9 A VR65 120 volt Rev (C) 10/6/98 SWITCHED TOTAL 150W or 0.5A MAX. UNSWITCHED TOTAL 100W or 1A MAX. (120V.60Hz) TOTAL 150W or 1.5A MAX MODEL NO. AVR-65 HARMAN KARDON NORTHRIDGE CALIFORNIA, USA FM (75 Ω ) AM ANTENNA GND AC 120V 60 Hz 3.
Rear Panel Connections 10 A VR65 120 volt Rev (C) 10/6/98 ª Subwoofer Pre-Out: Connect this jack to the line level input of a powered subwoofer . If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. ‚ Front: Connect these terminals to the front left/right speakers.
Remote Control Functions 11 A VR65 120 volt Rev (C) 10/6/98 a y v t r d f i k m o b c e g j h l n p q s u x w z ` a A VR Selector b Device Control Selectors c Power Button d Mute e T est f Display/Mul.
Remote Control Functions IMPORT ANT NOTE: The A VR65’ s remote may be pr ogrammed to con- tr ol up to eight devices, including the A VR65. Before using the remote, it is important to remember to press the Device Control Selector button ab that corresponds to the unit you wish to operate.
Remote Control Functions n Memory Button: Press this button to enter a radio station into the A VR65’ s preset memory . After pressing the button the MEMOR Y indicator P will flash, and you then have five seconds to enter a present memory location using the Numeric Keys l .
Installation and Connections System Installation After unpacking the unit, and placing it on a solid surface capable of supporting its weight, you will need to make the connections to your audio and video equipment. These steps need to be done only when the receiver is first installed, or when a change is made to the input source equipment.
Installation and Connections NOTE: While most speaker manufacturers adhere to an industry convention of using black terminals for negative and red ones for positive, some manufacturers may vary from this configuration.
System Configuration When all audio, video and system con- nections have been made, there are a few configuration adjustments to be made. A few minutes spent to correctly configure and calibrate the unit will greatly add to your listening experience.
System Configuration 17 A VR65 120 volt Rev (C) 10/6/98 System Setup Once the speakers have been placed in the room and connected, the final step in the setup process is to enter the settings that con.
System Configuration 18 A VR65 120 volt Rev (C) 10/6/98 Speaker Configuration The first few adjustments tell the A VR65 which type of speakers are in use. This is important as it adjusts the settings that determine which speakers receive low- frequency (bass) information.
System Configuration 19 A VR65 120 volt Rev (C) 10/6/98 When CEN SP LARGE is selected, a full-range output will be sent to the center speaker output, and NO center channel signal will be sent to the subwoofer output. When CEN SP NONE is selected, no signals will be sent to the center channel output.
System Configuration T o adjust and calibrate the output levels, follow these steps. For accurate calibration, it is a good idea to make these adjustments from the location in your room that is your favorite listening position: 1.
System Configuration Delay Settings One aspect of the surround modes is the delay of audio signals between the front speakers and the rear speakers. Each surround mode is factory preset with a specifi.
System Configuration 3. Press the Set button i ˜ . 4. Adjust the delay time by pressing the ⁄ / ¤ buttons g on the remote or the Selector buttons ¸ on the front panel until the delay time figure cal- culated using the formula entered above appears in the display .
Operation Basic Operation Once you have completed the setup and configuration of your new receiver , it is simple to operate and enjoy . The follow- ing instructions will provide the steps needed to e.
Operation Full-OSD A second display option is to have a full screen report of the A VR65’ s status appear . T o activate the full OSD, press the OSD button o three times in quick succession. The first press will turn the semi-OSD on, the second will turn the semi-OSD off, and the third will bring a full status report to the screen.
Operation Surround Mode Selection One of the most important features of the A VR65 is its ability to reproduce a full multichannel surround sound field from Dolby Digital sources, analog matrix surround encoded programs and stan- dard stereo programs.
Operation 26 A VR65 120 volt Rev (C) 10/6/98 MODE DOLBY DIGIT AL DTS DOLBY PRO LOGIC DOLBY 3 STEREO THEA TER HALL 1 and HALL 2 STEREO FEATURES This mode is available only when the source material is encoded with Dolby Digital (AC-3) data. It provides up to five separate main audio channels and a special dedicated Low-Frequency Effects channel.
Operation Digital Audio Playback Dolby Digital Dolby Digital (also known as AC-3) is a digital audio system that delivers up to five full-range surround channels (left, center , right, left surround and right surround) plus a special dedicated Low- Frequency Effects (LFE) channel.
Operation 1+1: This is a monaural signal that plays the same information in both the left front and right front speakers. There is no sound sent to the center or surround speakers. 1/0: This is a monaural signal that plays through the center channel speaker only .
Operation Station Selection 1. Press the AM/FM button $ k to select the tuner as an input. 2. Press the AM/FM button $ k again to switch between AM and FM so that the desired frequency band is selected. 3. Press the T une Mode button * q to select manual or automatic tuning.
Operation Output Level T rim Adjustment Normal output level adjustment for the A VR65 is established using the T est T one, as outlined on page 20. In some cases, however , it may be desirable to adjust the output levels using program material such as a test disc, or a selection you are familiar with.
Multiroom Operation The A VR65 is fully equipped to operate as the control center for a sophisticated multiroom operation with optional remote IR sensors, speakers and power amplifiers.
Multiroom Operation 1. Press the Multi button f to initiate the multiroom system. If the semi-OSD system is engaged, a message will appear at the bottom of the screen. If the full-OSD system is engaged, the complete multiroom menu (Figure 9) will be shown on the video display .
Programming the Remote The A VR65 is equipped with a powerful remote control that will control not only the receiver’ s functions, but also most CD players and cassette decks manufactured by Harman Kardon.
Programming the Remote 4. Press the Device Control Selector again, and note that the red light will flash twice to confirm the entry before going dark.
Programming the Remote T o find out what function a particular button has for a specific device, find the button number on the Function List and then look in the column for the device you are controlling. For example, button number 5 is the T est T one button for the A VR65, but it is the “Favorite” button for many VCRs and Satellite receivers.
Programming the Remote After following these steps, each time you press the Power button c , the remote will send the Power On/Off command each time the Power button is pressed. T o remove a macro program, follow steps 1, 2 and 4 above, but do not follow step three.
Programming the Remote 37 A VR65 120 volt Rev (C) 10/6/98 Function List No. Button Name CD T ape Aux (DVD) TV VCR CBL SA T 1 Power On/Off Power Power On/Off Power On/Off Power On/Off Power On/Off 2 Sl.
Programming the Remote 38 A VR65 120 volt Rev (C) 10/6/98 1 2 3 7 4 8 5 6 12 14 16 15 9 10 11 13 17 21 22 23 24 28 27 26 25 29 33 34 35 36 37 42 43 44 45 46 48 47 41 40 39 38 30 31 32 18 19 20 Referen.
Programming the Remote 39 A VR65 120 volt Rev (C) 10/6/98 Manufacturer/Brand Setup Code Number A MARK 112 ADMIRAL 072 081 161 AKAI 001 167 AMPRO 073 167 ANAM 043 054 055 056 080 104 108 112 118 121 AO.
Programming the Remote 40 A VR65 120 volt Rev (C) 10/6/98 Manufacturer/Brand Setup Code Number JC PENNY 004 008 024 030 065 101 143 160 JENSEN 013 JVC 034 038 070 083 KENWOOD 001 070 KLOSS 002 059 KTV.
Programming the Remote 41 A VR65 120 volt Rev (C) 10/6/98 Manufacturer/Brand Setup Code Number REALISTIC 007 019 047 RUNCO 072 169 SAMPO 001 004 058 SAMSUNG 004 101 127 133 143 160 SANYO 007 020 021 0.
Programming the Remote 42 A VR65 120 volt Rev (C) 10/6/98 Manufacturer/Brand Setup Code Number AIW A 034 AMPRO 072 ANAM 031 103 AUDIO DYNAMICS 012 023 043 BROKSONIC 035 037 129 CANON 028 031 CAPEHART .
Programming the Remote 43 A VR65 120 volt Rev (C) 10/6/98 Manufacturer/Brand Setup Code Number OPTONICA 053 054 P ANASONIC 070 133 140 PENT AX 004 020 031 063 PHILCO 031 034 067 PHILIPS 031 034 054 06.
Programming the Remote 44 A VR65 120 volt Rev (C) 10/6/98 Manufacturer/Brand Setup Code Number ADCOM 062 042 AIW A 187 170 AKAI 202 195 CARVER 003 167 041 135 138 139 050 203 DENON 205 226 HARMAN KARD.
Programming the Remote 45 A VR65 120 volt Rev (C) 10/6/98 Manufacturer/Brand Setup Code Number Remote Control Model PIONEER 001 BR-200 AMERICAST 005 JERROLD 006 RT -J22 (CFT2200) JERROLD 007 RT -J550C.
T roubleshooting Guide 46 A VR65 120 volt Rev (C) 10/6/98 SYMPTOM No front panel lights when power switch is pressed Display lights, but no sound or picture No sound from any speaker .
T echnical Specifications 47 A VR65 120 volt Rev (C) 10/6/98 Audio Section Stereo Mode Continuous A verage Power (FTC) 75 Watts per channel 20Hz–20kHz: @ < 0.07% THD, both channels driven into 8 ohms Five-Channel Surround Mode Power Per Individual Channel Front L&R channels: 65 Watts per channel, @ < 0.
Notes 48 A VR65 120 volt Rev (C) 10/6/98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A VR65 120 volt Rev (C) 10/6/98 DIGITAL COAX AC-3 AVR 65 CD T • MON DVD VID 1 VID 2 VID 3 6 CH AM/FM TUNING Phones Power Printed in China Part #1 1 1 1-A VR65OM 631 1-005-010.
A VR65 120 volt Rev (C) 10/6/98 Harman Kardon A VR65 Audio/ V ideo Receiver Owner’ s Manual DIGITAL COAX AC-3 AM/FM PRESET SCAN TUN MODE DIGITAL PRO LOGIC 3-STEREO HALL 1 HALL 2 THEATER SURR. OFF PRESET TUNING Mute R L Max Min Max Min Bass Treble Balance Volume Speaker Multi Room Dig.
Owner’ s Manual A VR65 Audio/V ideo Receiver A VR65 120 volt Rev (C) 10/6/98 T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Information . . . . . . . . . . . . . . . . . . .
A VR65 120 volt Rev (C) 10/6/98 Staple or clip original invoice here. ▼.
Een belangrijk punt na aankoop van elk apparaat Harman-Kardon AVR65 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Harman-Kardon AVR65 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Harman-Kardon AVR65 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Harman-Kardon AVR65 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Harman-Kardon AVR65 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Harman-Kardon AVR65 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Harman-Kardon AVR65 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Harman-Kardon AVR65 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
