Gebruiksaanwijzing /service van het product TWILIGHT-II van de fabrikant Heat & Glo LifeStyle
Ga naar pagina of 37
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 1 Model: T wilight-II* Owner ’ s Manual Installation and Operation * Does not ship with interior or exterior door , or TL-Trim kit. These items must be purchased separately.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 2 Congratulations Listing Label Information/Location Model Name: ___________________________________________ Date p.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 3 - T able of Contents - Section 8: Finishing A . Mantel Projections ................................... 1 8 B . Facing Material .....................................
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 4 B. Glass Specifications Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous locations such as bathtub enclosures as defined by the Consumer Product Safety Commission (CPSC).
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 5 A. Design and Installation Considerations Heat & Glo direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 6 3 Framing and Clearances NOTE: • Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONL Y. • I llustrations/diagrams are not drawn to scale.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 7 B. Clearances Figure 3.3 Clearances to Combustibles Fire Risk. • Locate and install appliance to all clearance specifications in manual W ARNING Fire Risk. Odor Risk.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 8 C. Mantel Projections - Interior only Figure 3.4 Indoor Clearances to Mantels or other Combustibles above Appliance Figure 3.5 Indoor clearances to Mantel Legs or Wall Projections (Acceptable on both sides of opening.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 9 T ermination Locations 4 ___________________________________________________________________________ ____________.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 10 The diagram shows how to properly position, level, and se- cure the appliance (see Figure 5. 2). Nailing tabs are provid- ed to secure the appliance to the framing members.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 11 • See Figure 5.3 for placement of combustible housewrap or building paper and non-combustible sheathing for the outside wall.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 12 NOTE: Have the gas supply line installed in accordance with local building codes, if any . If not, follow ANSI 223.1. Installation should be done by a qualified installer approved and/or licensed as required by the locality .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 13 W ARNING Fire hazard. Do NOT change the valve settings. • This valve has been preset at the factory . • Changing valve settings may result in fire hazard or bodily injury .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 14 A. Recommendation for Wire This appliance requires 1 10-120 V AC be wired to the junction box for proper operation of the appliance.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 15 Wall Switch Position the wall switch in the desired position on a wall. Run a maximum of 25 feet (7.8 m) or less length of 18 A.W .G . minimum wire and connect it to the appliance ON/ OFF switch pigtails.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 16 Figure 7.3 Intellifire Pilot Ignition (IPI) Wiring Diagram * NOTE: 1. Ignition module, valve, pilot, and wall switch operate on 3 volts. Uninterrupted 120 V AC is required at junction box unless equipped with battery back-up.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 17 E. Junction Box Installation F . W all Switch Inst allation for Fan (Optional) If the box is being wired from the OUTSIDE of the appliance: • Install the Romex ™ connector (not included with appliance) in the side wrap.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 18 A. Mantel Projections Figure 8.1 shows the minimum vertical and corresponding maximum horizontal dimensions of appliance mantels or other combustible projections above the top front edge of the appliance.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 19 Outside Facing Material Fire Risk. Finish all edges and fronts to clearances and specifications listed in manual. W ARNING • Black metal columns may be covered with non- combustible material only .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 20 Figure 8.5 Exterior View APPLIANCE HOOD TOP OF APPLI ANCE SOFF I T SIDING HOUSE W R AP (BUILD ING P A PE R) A ND.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 21 Appliance Setup 9 A. Remove Shipping Materials Remove shipping materials from inside or underneath the firebox. B. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 22 E. Positioning the Logs Log Set Assembly: LOGS-TWI 1 2 2005-937D CAUTION: Logs are fragile! Carefully remove the logs from the packaging. Remove the metal supports which held the log box in place during shipping.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 23 STEP 4. LOG #3 (SRV2005-702): Position log #3 as shown by leaning it against log # 2 and resting the other end on the peak of the burner . Do not cover any port holes.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 24 STEP 8. LOG #7 (SRV703-703): Place log #7 on the grate tine between log #2 and log #5. Rest one end on the burner making sure not to cover any port holes. STEP 7. LOG #6 (SRV2077-701): Set log #6 onto the grate bar as shown.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 25 A. Before Lighting Appliance Operating Instructions 10 CAUTION If installing Intellifire ignition battery backup: • Do not install batteries if the backup mode may not be used for extended time.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 26 B. Lighting Appliance Intellifire Ignition Final Inspection by _________________________________ 1. Turn off all electric power to the appli- ance. 2. This appliance is equipped with an ig- nition device which automatically lights the burner .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 27 C. Af ter Appliance is Lit D. Frequently Asked Questions Initial Break-in Procedure When you light the appliance, you may notice that it pro- duces heat which does have an associated odor or smell.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 28 T roubleshooting 11 With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 29 Intellifire Ignition System - (continued) Sym pt om P ossibl e C auses Correct i ve Act i on s 3. C on t i n u ed d. Damaged pilot assem bl y or dirt y sen sor r od.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 30 Maint aining and Servicing Appliance 12 Although the frequency of appliance servicing and maintenance will depend on use and the type of installation, a qualified service technician should perform an appliance check-up at the beginning of each heating season.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 31 I nspect Mai nt en ance T asks Doors, Su r rou n ds an d Fr on t s 1. Assess c on di t i on of scr een an d r epl ace as n ecess ary . R ecom mend addi t i on of scr een i f on e i s not present .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 32 Reference Materials 13 Locati on In ch e s Millime te r Locati on In ch e s Millime te r A 4-3/ 4 121 J 36-1/ 4 .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 33 Part number list on following page. (NG , LP) Exploded Parts Diagram B.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 34 B. Service Parts List See following page for additional IPI service part numbers.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 35 14 (NG , LP) Exploded Parts Diagram Service Parts TWILIGHT -II Beginning Manufacturing Date: 6-05 Ending Manufac.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 36 © 2005 Hearth & Home T echnologies Inc. C. Limited Lifetime W arranty LIMITED LIFETIME W ARRANTY HEA T & GLO GAS APPLIANCE PRODUCTS BASIC ONE-YEAR W ARRANTY .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 37 Heat & Glo LifeS tyle Collection, a brand of Hearth & Home T echnologies Inc.
Een belangrijk punt na aankoop van elk apparaat Heat & Glo LifeStyle TWILIGHT-II (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Heat & Glo LifeStyle TWILIGHT-II heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Heat & Glo LifeStyle TWILIGHT-II vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Heat & Glo LifeStyle TWILIGHT-II leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Heat & Glo LifeStyle TWILIGHT-II krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Heat & Glo LifeStyle TWILIGHT-II bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Heat & Glo LifeStyle TWILIGHT-II kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Heat & Glo LifeStyle TWILIGHT-II . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
