Gebruiksaanwijzing /service van het product Switches and Sensors van de fabrikant Honeywell
Ga naar pagina of 148
Sensors Industrial Switches Global switches Heavy duty switches Compact switches Precision switches Hazardous location switches Safety switches Relays Position products Ultrasonic distance sensors Pre.
2 www .honeyw ell.com/sensing Inside front co v er ! WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet (or catalogue) is for reference only.
1 www .honeyw ell.com/sensing CONTENTS Introduction - How to use this catalogue Page 2 EVN2000 Series Page Fast Install Limit Switches A recent addition to our range. Saves over 50 % in installation time with a design that eliminates the need to gain access to the inside of the housing in order to connect the switch.
2 www .honeyw ell.com/sensing INTRODUCTION HONEYWELL INDUSTRIAL SWITCHES AND SENSORS Honeywell Industrial Switches and Sensors provide a wide selection of products and technologies for applications in most industrial applications. This catalogue contains our most popular listings.
3 www .honeyw ell.com/sensing INTRODUCTION How to use this catalogue For each referenced listing, key specification parameters, descriptions and mounting drawing information are presented. These illustrate our capabilities while the specifications include allow easy differentiation between similar products.
4 www .honeyw ell.com/sensing Blank page.
5 www .honeyw ell.com/sensing Industrial Electromechanical Limit Switches Honeywell offers an advanced line of heavy duty limit switches and a wide selection of application-proven enclosed switches (precision snap-acting switches sealed in rugged metal housing).
6 www .honeyw ell.com/sensing LIMIT SWITCHES Proper application of limit switches The following are guidelines for the correct application of Limit Switches. Never use the Limit Switch as a physical end stop. Mechanical damage or incorrect operation may occur if this is done.
7 www .honeyw ell.com/sensing LIMIT SWITCHES A Note on Degrees of Protection IP Classification The IEC 529 standard describes a system for classifying the degree of protection provided by the enclosures of electrical equipment. The level of protection given by the enclosure is indicated by the IP code.
8 www .honeyw ell.com/sensing GLOBAL LIMIT SWITCHES EVN2000 Series EN 50047 Global Limit Switches The EVN2000 series limit switch is an innovative product which has been developed to address a need highlighted by Original Equipment Manufacturers (OEM), where “Ease of Wiring” is required.
9 www .honeyw ell.com/sensing VL Series General Purpose Compact Limit Switches The new economical SZL-VL Series miniature type limit switches are specially designed for applications of small mounting space.
10 www .honeyw ell.com/sensing VL Series Side rotary actuated switches (continued) Adjustable rod 7 .276 in dep th mounting holes hexagonal holes .217 36.3±0.8 44.9 (Roller can b e rotate d and locked in any position through 360˚) M4 rod fastenin g plate screw with hexa gonal holes Rod fastening plate 12.
11 www .honeyw ell.com/sensing Plunger actuated switches (continued) Cross roller plunger .402 M3x6 cover screw 12.5 dia.x3.8 stainless ste el roller 2-M3x23 cover scre w 21±0.2 28 56± 0.3 38 14.8 7.5± 0.2 15.1 25 20.4±0.3 .157 64 14 mounting ho les 2-M5 (P =0.
12 www .honeyw ell.com/sensing GLS Series Global Limit Switches GLOBAL LIMIT SWITCHES SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT EN50041 (GLA) EN50047 (GLC, GLD, GLE) 0,120 N m (1.10 lb in) 0,165 N m (1.50 lb in) GLE only 11.
13 www .honeyw ell.com/sensing GLA EN 50041 Standard metal body Mechanical life: up to 15 million Sealing: IP 67, NEMA 1, 4, 12, 13 Operating temperature: -25 °C to 85 °C (-13 °F to 185 °F) Approv.
14 www .honeyw ell.com/sensing GLA EN 50041 Standard metal body (continued) W obble, coil actuator CONT ACT CONDUIT REFERENCE SPDT ½ in NPT GLAA01E7B SPDT PG 13,5 GLAB01E7B DPDT PG 13,5 GLAB20E7B SPD.
15 www .honeyw ell.com/sensing GLC EN 50047 Standard metal body (continued) Side rotar y adjustable Plastic roller CONT ACT CONDUIT REFERENCE SPDT ½ in NPT GLCA01A2A SPDT PG 13,5 GLCB01A2A Metal roller CONT ACT CONDUIT REFERENCE SPDT ½ in NPT GLCA01A2B SPDT PG 13,5 GLCB01A2B SPDT 20 mm GLCC01A2B Side rotary adjustable, metal rod 34 (1.
16 www .honeyw ell.com/sensing GLD EN 50047 Double insulated standard body 24,75 (0.97) 14,5 (.57) 30 (1.18) conduit thread PG 13,5 22 (.87) 20 (.78) 3 (.
17 www .honeyw ell.com/sensing GLE EN 50047 Compatible 3 conduit metal standard body (continued) Offset side rotary roller Plastic roller CONT ACT CONDUIT REFERENCE SPDT ½ in NPT GLEA01A5A SPDT PG 13.
18 www .honeyw ell.com/sensing OPTIONS T op pin plunger 25,4 (OP) CONT ACT REFERENCE Silver SL1-H Gold clad cross point SL1-HK T op roller plunger , parallel 31,4 (OP) CONT ACT REFERENCE Silver SL1-A Gold clad cross point SL1-AK SL1 Series Compact Limit Switches The SL1 Series compact limit switches are sealed, sensitive and have a long life.
19 www .honeyw ell.com/sensing T op roller plunger , perpendicular 31,4 (OP) CONT ACT REFERENCE Silver SL1-D Gold clad cross point SL1-DK T op roller plunger , long, perpendicular 41,4 (OP) CONT ACT REFERENCE Silver SL1-K Gold clad cross point SL1-KK T op roller lever Operating force max.
20 www .honeyw ell.com/sensing COMP ACT LIMIT SWITCHES 14CE/914CE Series Miniature Enclosed Switches The 14CE/914CE Series offers a miniature, rugged, compact, pre-wired switch which has proved itself successful and gained wide market acceptance.
21 www .honeyw ell.com/sensing COMP ACT LIMIT SWITCHES Plunger actuated switches OPTIONS T op pin plunger Ø 10,0 (0.39) OP 15,7 (0.62) NORTH AMERICA/GLOBAL REFERENCE 3 ft cable, bottom exit 914CE1-3 .
22 www .honeyw ell.com/sensing COMP ACT LIMIT SWITCHES 14CE/914CE Series Plunger actuated switches (continued) T op roller plunger , perpendicular Ø 12,4 (0.
23 www .honeyw ell.com/sensing COMP ACT LIMIT SWITCHES 24CE/924CE Series Miniature Safety Electromechanical Switches Free position Note: connector versions also available 2 Holes 5,1 dia Counter Bored 10,2 dia x 6 deep (both sides - option 'A' only) Side exit cable (Option 'A') max.
24 www .honeyw ell.com/sensing 24CE/924CE Series OPTIONS Side rotar y PT PT OT OT DT DT North America/Global CABLE LENGTH CONT ACT REFERENCE 3 ft 1NC, BBM 924CE16-S3 9 ft 1NC, BBM 924CE16-S9 3 ft 1NC,.
25 www .honeyw ell.com/sensing T op roller plunger , parallel, boot sealed 36,1 max. ø12,4 North America/Global CABLE LENGTH CONT ACT OPTION REFERENCE 3 ft 1NC, BBM 924CE31-S6 20 f t 1NC 924CE31- Y20.
26 www .honeyw ell.com/sensing COMP ACT LIMIT SWITCHES Blank page.
27 www .honeyw ell.com/sensing LS Series Compact Limit Switches LS Series compact limit switches are carefully designed for accurate repeatability under the most stringent conditions. Compact size and field adjustable features greatly extend the flexibility of these switches.
28 www .honeyw ell.com/sensing COMP ACT LIMIT SWITCHES LS Series Side rotary actuated switches OPTIONS Fixed length lever Operating force max. (OF): Standard 13,3 N (3.0 lb) Low 5,0 N (18 oz) Pretravel max. (PT): Standard 20° Low 5° Overtravel min. (OT) 30° Differential travel max.
29 www .honeyw ell.com/sensing No lever Note: Levers are ordered separately (see pages 69-71 for details) Operating force max. (OF): Standard 0,51 N m (4.5 in lb) Low with standard PT 0,21 N m (30 in oz) Low with low PT 0,11 N m (1 in lb) Pretravel max.
30 www .honeyw ell.com/sensing COMP ACT LIMIT SWITCHES LS Series Plunger actuated switches OPTIONS T op pin plunger Operating force max. (OF): Standard 31,14 N (7 lb) Low 10 N (36 oz) Pretravel max. (PT): 1,65 mm (0.065 in) Overtravel min. (OT) Standard 6,35 mm (0.
31 www .honeyw ell.com/sensing W obble actuated switches These switches will operate by moving actuator in any direction except direct pull. Operating force max. (OF): 1,39 N (5 oz) Pretravel max. (PT): 28,6 mm (1,125 in) Switching options: SPDT OPTIONS Flexible cable 141,0 ±2,54 (5,550 ±0.
32 www .honeyw ell.com/sensing BF Series Plastic Enclosed Basic Switches PRECISION LIMIT SWITCHES BF Series Plastic Enclosed Basic Switches are available with a wide variety of actuators, and are designed for easy mounting and wiring. BF switches are designed to allow mounting with the cover either towards or away from the mounting surface.
33 www .honeyw ell.com/sensing PRECISION LIMIT SWITCHES Plunger actuated switches (continued) T op roller arm, adjustable, one way 14,73 0.58 32,26 1.27 19,05 0.75 180˚ 58,7 2.31 73,5 2.89 35,1 1.38 Ø 15,5 0.61 44,5 1.75 73,6 2.90 9,5 0.38 4,9 0.19 17,5 0.
34 www .honeyw ell.com/sensing BZE/DTE Series Compact Enclosed Switches The BZE/DTE Series general purpose enclosed limit switches offer precision operation and sturdy actuation in a compact but rugged aluminium housing. The large wiring enclosure means that the user can get access to wire the device simply .
35 www .honeyw ell.com/sensing E6/V6 E6 (side mount) and V6 (flange mount) switches are offered with or without actuator seal boots. Both have a combination insulator/ seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches.
36 www .honeyw ell.com/sensing BZE/DTE Series E6/V6 Momentary contact (continued) T op roller plunger , perpendicular Flange mount without boot seal 56,6 (2,23) OP 19,0 (0.75) 25,4 (1.00) 25,4 (1.00) 77,2 (3.04) 22,6 (0.89) 12,7 (0.50) Ø X 4,6 (0.18) W Roller Side mount with boot seal With boot seal Operating Force max.
37 www .honeyw ell.com/sensing One way roller lever Side mount with boot seal With boot seal Operating Force max. (OF): 2,22 N to 5,56 N (8 oz to 20 oz) Pretravel max. (PT): 5,94 mm (0.234 in) Overtravel min. (OT): 5,56 mm (0.219 in) Differential travel max.
38 www .honeyw ell.com/sensing BZE/DTE Series E6/V6 Maintained contact (reset) switches The switches shown below provide maintained contact after the operating force on either top or bottom plunger is released.
39 www .honeyw ell.com/sensing E7 Metal standard enclosed switch Mechanical life: 10 million Sealing: Without boot seal IP50 Standard With boot seal IP65 Sealed Operating temperature: -30 °C to 70 °.
40 www .honeyw ell.com/sensing PRECISION LIMIT SWITCHES BAF/DTF Series High Capacity Enclosed Switches The BAF/DTF Series is available with or without boot seals. The elastomer boot on sealed actuator versions protects the actuating mechanism and the internal basic switch from contamination.
41 www .honeyw ell.com/sensing PRECISION LIMIT SWITCHES Momentar y contact (continued) T op roller plunger , parallel Right-hand Left-hand *28,2 on DTF2 Types 1.11 O-ring actuator seal Operating force max. (OF): BAF/DTF 35,6 N (8.0 lb) Pretravel max. (PT): BAF/DTF 3,18 mm (0.
42 www .honeyw ell.com/sensing BAF/DTF Series Momentary contact (continued) Manual palm button Left-hand *28,2 on DTF2 Types 1.1 1 With boot seal Operating force max.
43 www .honeyw ell.com/sensing Wobble, coil spring 82,6 (3.25) 41,4 (1.63) 27,4 (1.08) 27,4 (1.08) 158,5 (6.24) 32,5 (1.28) 20,6 (0.81) 101,6 (4.00) Ø 7,1 (0.28) Ø 6,9 (0.27) (3) 1/2-14 NPT Threads With boot seals on wobble stick and plunger Pretravel max.
44 www .honeyw ell.com/sensing HEA VY DUTY LIMIT SWITCHES HDLS Series Heavy Duty Limit Switches The HDLS Series Heavy Duty Limit Switches offer a wide choice of mounting and actuator options.
45 www .honeyw ell.com/sensing HEA VY DUTY LIMIT SWITCHES Operating temperatures Environmental seal performance.
46 www .honeyw ell.com/sensing HDLS Series Side rotary actuated switches Levers: Levers for side rotary types are ordered separately (see pages 69-71 for details) Approvals: NEMA 1, 3, 4, 4X, 6, 6P , 12, 13 UL, CSA, CE Operating force (Newton meters, N m/in lb): LSA, LSL, LSM, LSM, LSP , LSU 0,45 N m max.
47 www .honeyw ell.com/sensing OPTIONS Standard Pretravel: 15° max. Differential travel: SPDT 5° max. DPDT 7° max. Overtravel: 60° min. Plug in CONT ACT CONDUIT ELECTRI CAL RA TING REFERENCE SPDT .
48 www .honeyw ell.com/sensing HDLS Series Side rotary actuated switches (continued) Maintained contact, 2 position Operation is maintained on counterclockwise rotation, reset on clockwise rotation and vice versa. Pretravel: 65° max. Differential travel: 40° max.
49 www .honeyw ell.com/sensing Side plungers, momentary action Pretravel: 2,54 mm (0.100 in) max. Differential travel: SPDT 0,64 mm (0.025 in) max. DPDT 0,89 mm (0.035 in) max. Overtravel: 4,83 mm (0.19 in) min. Operating force: 26,7 N m (6 lb) max. OPTIONS Side pin plunger Operating point: 33 mm ± 0,76 1.
50 www .honeyw ell.com/sensing HDLS Series W obble actuated switches Momentary action wobble actuated switches have flexible levers which may be operated with any movement, except direct pull.
51 www .honeyw ell.com/sensing Fully potted HDLS Fully potted HDLS are designed to meet the demanding requirements of NEMA 1, 3, 4, 6, 6P and 13 for wet applications where the integrity of the conduit seal must be assured.
52 www .honeyw ell.com/sensing Fully potted HDLS (continued) Side rotary actuated switches Sequential Pretravel: 1st pole 15° max. 2nd pole additional 10° max. Differential travel: Each pole 5° max. Overtravel: 48° max. Operating force: 0,45 N m (4 in lb) max.
53 www .honeyw ell.com/sensing Stainless steel HDLS HDLS stainless steel switches are designed for use in highly corrosive environments such as petro- chemical plants, food processing plants, shipboard and dockside locations. The type 316 cast stainless steel body is designed to minimise crevices where food particles could become trapped.
54 www .honeyw ell.com/sensing Blank page.
55 www .honeyw ell.com/sensing Explosion proof switches Honeywell explosion proof switches are designed specifically for use in hazardous locations. T o comply with explosion proof requirements, the flame path within the housing is designed to contain and cool the escaping hot gases that otherwise could cause an explosion outside the switch.
56 www .honeyw ell.com/sensing T op pin plunger M4 ground screw 40,0 Max. 1,57 16,0 Max. 0.63 25,0 1.00 59,0 2.32 31,4 1.24 15,7 OP 0.62 1,8 PT 0.07 49,0 Max. 1.93 7,6 0.30 (2) Ø 5,1 (0.20) Mounting holes Ø 10,0 (0.39) Stainless steel plunger "L" CABLE LENGTH REFERENCE 1 m (3.
57 www .honeyw ell.com/sensing GXE Series Explosion Proof Limit Switches The GXE Series explosion proof limit switches are designed specifically for use in hazardous applications. The GXE enclosure is fully potted and has sealing protection of IP66/67 as per IEC/EN 60529.
58 www .honeyw ell.com/sensing EX Series Standard Explosion Proof Switches The EX Series features the smallest UL listed housings available for use in hazardous locations. Flame paths within the housing cool exploding gases below the kindling temperature before they reach the explosive gases surrounding the housing.
59 www .honeyw ell.com/sensing Roller lever Roller material: Bronze Operating force max. (OF): Electrical rating A Clockwise (CW) 2,22 N to 5,56 N (0.5 lb to 1.25 lb) Counter clockwise (CCW) 11,1 N (2.5 lb) Electrical rating B 3,34 N to 8,90 N (0.75 lb to 2.
60 www .honeyw ell.com/sensing EX Series Side rotary actuated switches (continued) Cross roller lever , rotated 90° Operating force max. (OF): 2,22 N to 5,56 N (0.5 lb to 1.25 lb) Pretravel max. (PT): 5,56 mm (0.219 in) 8° Overtravel max. (OT 90° Differential travel max.
61 www .honeyw ell.com/sensing Boot sealed Operating force max. (OF): Electrical rating D 13,34 N (3.0 lb) Electrical rating B 15,57 N (3.5 lb) Pretravel max. (PT): Electrical rating D 1,98 mm (0.078 in) Electrical rating B 2,77 mm (0.109 in) Overtravel min.
62 www .honeyw ell.com/sensing CX Series W eather Sealed Explosion Proof Switches CX switches, as are the LSX/BX Series, are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion.
63 www .honeyw ell.com/sensing Short housing Standard housing OPTIONS HOUSING BASIC CONT ACT ELECTRICAL SHAFT RESTORI NG REFERENCE SIZE SW ITCHES RA TING FORCE TO CENTRE Short BZ (2) SPDT A With 11CX2.
64 www .honeyw ell.com/sensing LSX/BX Series W eather sealed explosion proof switches LSX/BX Series weather sealed, explosion proof limit switches are for use either indoor or outdoors in hazardous atmospheres. They are completely sealed and designed for use in explosive gas/dust environments.
65 www .honeyw ell.com/sensing OPTIONS Side rotar y Operating temperature: -12 °C to 121 °C (10 °F to 250 °F) LSX CONT ACT CONDUIT ELECTR ICAL RA TING REFERENCE SPDT ½ in - 14NPT A LSXA3K SPDT 20.
66 www .honeyw ell.com/sensing LSX/BX Series (continued) Plunger actuated switches T op plungers Operating force max. (OF): 17,79 N (4 lb) Pretravel max. (PT): 1,78 mm (0.07 in) Overtravel min. (OT): 4,83 mm (0.19 in) Differential travel max. (DT): SPDT 0,38 mm (0.
67 www .honeyw ell.com/sensing Side plungers Operating force max. (OF): 26,69 N (6 lb) Pretravel max. (PT): 2,54 mm (0.10 in) Overtravel min. (OT): 4,83 mm (0.19 in) Differential travel max. (DT): 1,14 mm (0.045) Operating temperature: -12 °C to 93 °C (10 °F to 200 °F) OPTIONS Side pin plunger Operating point: 33,0 mm (1.
68 www .honeyw ell.com/sensing Blank page.
69 www .honeyw ell.com/sensing Levers Separate levers must be ordered with side rotary types. The table provides a cross reference between product families and the lever order/ reference numbers. The following pages describe the levers. Illustrations are for reference only .
70 www .honeyw ell.com/sensing OPTIONS Standard fixed lever MOUNTED ON REFERENCE Without roller LSZ51* Nylon roller Front LSZ51A* Metal roller F ront LSZ51B Nylon roller Back LSZ51C* Metal roller Back.
71 www .honeyw ell.com/sensing NOTICE ** Large rubber rollers and conveyor roller arm Because of the lever’s mass, the limit switch should be mounted with the lever facing down. This will enable gravity to help restore the switch to the free position.
72 www .honeyw ell.com/sensing MY2 Series OPTIONS Standard, PCB T erminal, DPDT 3,5 [0.14] 1,0 [0.04] 3,3 [0. 1 3] 0,5 [0.02] 0,5 [0.02] Max. 36 ,0 [1.
73 www .honeyw ell.com/sensing POWER RELA YS Solder/Plug-In T erminal, 4PDT 14 - O 1.2 [0.0 5] x 3 Holes 0,5 [0. 02] Max. 36,0 [1 .42] 6,0 [0.2 4] Max. 21,5 [0.8 5] Max. 28, 0 [1.10] 6,3 [0.2 5] 0,5 [0.02] 2,6 [0.10] Standard COIL INPUT VOL T AGE MAX.
74 www .honeyw ell.com/sensing POWER RELA YS SZR-L Y Series Power Relay SZR-L Y Series general-purpose power relays are designed for a wide range of applications including power , as well as logic control, for factory machines and control panels.
75 www .honeyw ell.com/sensing POWER RELA YS Solder/Plug-In T erminal, 4PDT 14 - O 3. 0 H oles Max. 36,0 [1.4 2] 6,4 [0.25] 3,0 [0.12] 5,0 [0.2 0] 0,5 [0.
76 www .honeyw ell.com/sensing 25,0 [0.99] 18,0 [0.70] 15,6 [0.61] 45,0 [1.7 7 ] 35,2 [1.39] 3,9 [0.15] 6,0 [0.24] 4,2 [0.17] 62,0 [2.44] 30,0 [1.18] 26,0 [1.02] 3,0 [0.12] 62,0 ± 0,1 [2.44 ± .004] 2 - O 4,5 [0.18] Holes 2-M3 or 2-M4 Max. 61,0 [2.40] 26,0 [1.
77 www .honeyw ell.com/sensing SAFETY SWITCHES Electromechanical Safety Switches Honeywell is a worldwide leader in advanced switching and sensing technology - especially in the area of industrial safety .
78 www .honeyw ell.com/sensing SAFETY SWITCHES GKM Series Global Miniature Safety Key Operated Switch Used alone as Category 1 safety components or , in conjunction with other safety switches and our complete range of safety relays, it is possible to construct comprehensive protection schemes with Category 2, 3 or 4 compliance.
79 www .honeyw ell.com/sensing SAFETY SWITCHES OPTIONS Side exit cable CABLE LENGTH CONT ACT REFERENCE 1 m 2NC, low energy GKMA17 1 m 1NC/1NO, BBM, low energy GKMA19 2 m 1NC/1NO, BBM GKMA23 2 m 2 NC G.
80 www .honeyw ell.com/sensing GSS Series Hinge Mount Safety Limit Switch The Hinge Mount Safety Limit Switch is designed for use on machine access doors as an alternative solution to key operated interlocks and safety limit switches.
81 www .honeyw ell.com/sensing GSC Metal body GSD Plastic body EN 50047 Safety Standard 24,75 / 0.97 14,5 / 0.57 30 / 1.18 conduit thread ø 23 / ø 0.
82 www .honeyw ell.com/sensing GSE EN 50047 Compatible Safety 3 Conduit Metal Standard conduit thread 60 / 2.37 4 / 0.16 52 / 2.05 57 / 2.24 65 / 2.56 13,75 / 0.54 2,5 / 0.1 R 2,15 / 0.08 3 / 0.12 20 / 0.79 22 / 0.87 40 / 1.57 42 / 1.65 23,8 / 0.94 ø 23 / ø 0.
83 www .honeyw ell.com/sensing SAFETY SWITCHES GK Series Dual Entr y Key Operated Safety Interlock Switch The GK Series is designed specifically for use on machines where key removal brings the machine to an immediate safe condition.
84 www .honeyw ell.com/sensing Head orientation OPTIONS Opening to front and top 9 / 0.35 Standard CONDUIT CONT ACT KEY REFERENCE 1/2 NPT 1NC/ 1NO 90° GKBA1L7 1/2 NPT 1NC/1NO Up-down GKBA1L8-F11* 1/2.
85 www .honeyw ell.com/sensing SAFETY SWITCHES GKL/GKR Series Dual Entr y Solenoid Key Operated Safety Interlock Switch The GKR (head to the right) and GKL (head to the left) products offer the user an unrivalled range of standard options. The GKR/GKL product is a key actuated device incorporating a key trapping mechanism.
86 www .honeyw ell.com/sensing GKL/GKR Series (continued) Key: T ype 6 Straight T ype 9 Side - side, spring loaded T ype X No key Latching mechanism: T ype A Mechanical (solenoid unlock with screwdriv.
87 www .honeyw ell.com/sensing SAFETY SWITCHES Opening to right and top 12 / 0.47 Right 1/2 in - NPT buna-n seals CONT ACT KEY LA TCHING SOLENOID REFERENCE TYPE TYPE VOL T AGE 3 (1NC/1NO, BBM) None A .
88 www .honeyw ell.com/sensing Keys for GK and GKL/GKR switches Straight key 15 / 0.59 8,5 / 0.33 20 / 0.79 49,8 / 1.96 77 / 3.03 14 / 0.55 3 / 0.12 0.21 2x ø 5,3 / REFERENCE GKZ56 90° key 8,5 / 0.33 49,8 / 1.96 14 / 0.55 40 / 1.57 52 / 2.05 0.21 2 x ø 5,3 / REFERENCE GKZ57 Spring-loaded key: up/down 40 / 1.
89 www .honeyw ell.com/sensing SAFETY SWITCHES CPS Series Cable Pull Safety Switch CPS Series Cable Pull Safety Switches provide a readily accessible emergency stop signal. This is a cost- effective means compared to using multiple emergency stop push-buttons.
90 www .honeyw ell.com/sensing CPS Series (continued) OPTIONS Cable maintained 1/2 in NPT CONT ACT INDICA TOR REFERENCE 1NC/1NO None 1CPSA1 1NC/1NO 24 V 1CPSA1A 1NC/1NO 120 V 1CPSA1B 2NC/2NO None 1CPS.
91 www .honeyw ell.com/sensing SAFETY SWITCHES Cable maintained both sides 1/2 in NPT CONT ACT CONT ACT BLOCK INDICA TOR REFERENCE MOUNTING 2NC/2NO 1 None 2CPSA1A1 2NC/2NO 1 24 Vdc 2CPSA1A1A 2NC/2NO 1.
92 www .honeyw ell.com/sensing Blank page.
93 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION Linear and Rotar y Position Position sensors respond to the movement or location of a target, such as a molding press slide or a pulley shaft, by producing either a digital or an analogue output correlated to its location.
94 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION LFII Series Longfellow II linear position transducer The new Longfellow II incorporates design innovations to increase transducer life and provide greater resistance to vibration, while providing a smooth high- quality signal for demanding factory control applications.
95 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION LFII Metric Series Longfellow II linear position transducer 2 1 3 34,5 (1.36) 19,00 (0.25) Dimensions in mm (inches) 11,11 (0.48) Across flats 47,8 (1.88) 50,8 (2.0) 42,7 (1.68) 21,3 (0.84) 12,7 (0.
96 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION DR Series Durastar rodless linear position transducer The DuraStar rodless linear position transducer is the longest lasting factory- rugged potentiometer . It allows large misalignment of shaft and housing, while providing whisper -quiet operation and smooth, clean signal output.
97 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION SLF Series Short Longfellow linear position transducer The Short Longfellow is frequently used for measuring linear position or displacement up to 6 inches (152,4 mm) on a wide variety of manufacturing and process equipment.
98 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION SLF Metric Series Short Longfellow linear position transducer 22.9 11 .4 1.5 22.9 11 .4 X 34.5 11 .4 Movable mounting brackets 6.6 across flats M6 x 1 metric th r e a d 6.3 across flats 1 5 1 2 000 oh m S haft E xte nd ed 2 3 4.
99 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION L T Series Linear position transducer , 1/2 in diameter The L T Series are ½ inch diameter , linear position transducers rugged enough to withstand the hostile environment of the factory. The L T can be provided with shaft seals for spray or hose down environments.
100 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION ML T Series Linear position transducer , 3/8 in Diameter The ML T Series is 3/8 in diameter linear position transducer that is rugged enough to withstand hostile factory environments.
101 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION AQL T/AQML T Series Shaftless, waterproof linear position transducer The AQL T and AQML T are shaftless waterproof linear potentiometers designed to operate in wet/washdown and in-tank environments.
102 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION M22 Series Rotar y position transducer The M22 rotary potentiometer , available in ser vo and bushing mount, utilizes wear -resistant MystR ® conductive plastic film combined with precious metal wipers to produce a quiet operating, low-noise, stable signal.
103 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION WPM Series Rotar y position transducer , ser vo mount Available in servo mount styles, the WPM Series rotary transducer provides long life by utilizing the proprietary MystR ® conductive plastic film, precious metal wipers and shielded ball bearings on the stainless steel shaft.
104 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION T orque W atch Guages The T orque Watch, an industry mainstay when an accurate indication of rotar y force is necessary , is simple to use, requiring no special tools or setups. Available in three models they cover ranges from 0.
105 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION INDEX TH100 Series The TH-100 Series puts Honeywell’ s proven variable-resistor technology to work in angle-management applications such as control-lever sensing and equipment position feedback.
106 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION 578 Series, Precision potentiometer The 578 Series conductive plastic precision potentiometer puts Honeywell’ s proven variable resistor technology to work in a high performance, cost- effective device.
107 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION 590 Series, Commercial potentiometer The 590 Series conductive plastic modular potentiometer features low electrical noise, smooth feel, robust construction, and brass bushing and shaft. T erminals are PC style.
108 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION 380 Series, Industrial potentiometer The 380 Series “Quiet One” is a 2-watt conductive plastic potentiometer offering superior dynamic noise and a long rotational life. It meets MIL-R-94 specifications where applicable.
109 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION RV4 MIL Series potentiometer The RV4 is a dual-marked potentiometer with all the fine features of the 380 Series in a more economical package. It is built in strict accordance with MIL-R-94.
110 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION RV6/392M MIL Series potentiometer RV6/392M Series are economical potentiometers designed to meet wave soldering applications for mounting PC boards. They meet flow solderability and washability test requirements, and MIL-R-94 standard apply .
111 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION 53 Series potentiometer The 53 Series has all the fine features of the Series 380 in a more economical package. It is available with a 50,8 mm [2.0 in] long shaft. Power rating: 2.0 W max. Element type: Conductive plastic T erminal type: Solder lug Shaft: Slotted, 50,8 mm (2.
112 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION 510 Series , Mechanical The 510 Series controls are manually operated, rotary , mechanical encoders that provide a two-bit gray code for relative reference applications and a four- bit gray code for absolute electrical reference applications.
113 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION S-510 Series The S-510 Series consists of a gallum arsenide IRED and silicon phototransitor mounted in a small injection-molded housing.
114 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION S-860/870 Series The S-860/870 family of optical switches offers the designer the most flexible semi-custom specification available in commercial optoelectronics.
115 www .honeyw ell.com/sensing LINEAR AND ROT AR Y POSITION S-800W Series, Wide gap The S-800W Series of wide gap slotted switches consists of a gallium arsenide IRED and silicon phototransistor in an injection-molded housing.
116 www .honeyw ell.com/sensing LINEAR AND ROT ARY POSITION Blank page.
117 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS Ultrasonic Distance Sensors Ultrasonic sensing systems offer no-touch distance measurements to an accuracy of 1 mm through dust, smoke and vapour , in areas of high noise level, and with all types of target materials, shapes and colours, with sensing ranges from 100 mm up to 6000 mm.
118 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS Figure 2 : Effect of target inclination on the measurement Environmental influences The velocity of sound in air is temperature-dependent, and increases at a rate of 0.
119 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS The new 940/947 Series is microprocessor controlled, can be set up quickly and are fitted with epoxy transducers. All the housings are sealed to IP67. The retroreflective versions allow detection of any kind of target without any dead zone.
120 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS 948 Series Thru scan, 2 part The 948 series perform presence measurement by using an ultrasonic beam. The 948 series is one of the smallest ultrasonic scan through devices in the world. It is especially suited for food and beverage applications, in particular bottle counting.
121 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS OPTIONS 2 switching outputs PNP 2NO/NC Analogue output 0-10 volts Beam angle: 8° Repeatability : 0,4 % or ±2 mm Supply voltage: 19 to 30 Vdc Sealing: Connector IP65 Front face IP67 Housing: M30 x 1,5 mm plastic (PBTB) Switching frequency: 5 to 30 Hz Max.
122 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS 942 Series 2 Piece 30 mm diameter sensor with RS232 Interface Voltage and current output 2 switching RS232 interface Max.
123 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS 946 Series T each In 30 mm diameter precision output OPTIONS Analogue voltage (0-10 V) and current (4-20 mA) output Beam angle: 5° Repeatability: < 0,1 % Supply voltage: 10 to 30 V Sealing: IP65 Housing: M30 x 1,5 mm stainless steel T ermination: M12 connector Max.
124 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS Accessories Due to regional agency approval requirements, some products may not be available in your area.
125 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS M12 Connectors OPTIONS WITHOUT CABLES M12 female, 5 pin, 5 screw terminals The 66195044-001 is used for the 940, 941, 944, 947 series but may be used for any industrial sensor with standard M12 4 pin or 5 pin connector .
126 www .honeyw ell.com/sensing UL TRASONIC DIST ANCE SENSORS Accessories (continued) Programming OPTIONS Software The software package 55195101-101 contains software for programming 942 series separate and 55195101-102 for the 942 series compact . The software runs under Microsoft Windows™ versions 95™ and later .
127 www .honeyw ell.com/sensing PRESSURE SENSORS Pressure Sensors Honeywell has over 40 years of experience in the pressure transducer industry . We offer three pressure sensor measurement types - absolute, differential and gage - including vacuum gage and bidirectional types.
128 www .honeyw ell.com/sensing PRESSURE SENSORS AB/HP Series The AB-High Performance pressure transducer is extremely accurate down to 0.25% span over a wide compensated temperature range. Both zero and full- scale temperature compensation are held to extremely narrow limits.
129 www .honeyw ell.com/sensing PRESSURE SENSORS BX Series The BX pressure sensor is intended for OEMs who need a small, high performance pressure sensor . The unique sensor module design eliminates the need for oil-filled capsules and corrugated diaphragms providing a true, robust sensing surface for long life and superior per formance.
130 www .honeyw ell.com/sensing PRESSURE SENSORS 25,0 (1.0) 25,0 (1.0) PSI: 1/8-27 NPT , 15,9 (0.625) Hex BAR: G 16,0 (0.25) Hex 76,0 (3.0) max. 38,0 (1.5) max. max. 2 4 3 1 2 3 Ground 4 Excitation Output EA Series The EA Series is designed for OEM users requiring high output and corrosion- resistance.
131 www .honeyw ell.com/sensing PRESSURE SENSORS 10,0 in. (0.375) max . PSI: 1/8-27 NPT , 16,0 (0.625) Hex 7/16 UNF , 14,0 (05625) Hex BAR: G1/4, 19,0 (0.75) Hex 3 Conductor , 24 AWG, Color Coded, Shielded Cable, 0,91 m (3 ft.) (1.875) 48,0 max. (1.0) max.
132 www .honeyw ell.com/sensing PRESSURE SENSORS MediaMate Series The MEDIAMA TE pressure transducer provides the user with the corrosion resistance of stainless steel at low OEM pricing. It is fully compensated and completely interchangeable without further calibration.
133 www .honeyw ell.com/sensing PRESSURE SENSORS SA Series The harsh duty SA pressure transducer has a water resistant, stainless steel case for complete protection from harsh environments. Internal hermetic sealing is used to provide measurement from absolute pressures (psia) or pressures referenced to a sealed chamber (psis).
134 www .honeyw ell.com/sensing PRESSURE SENSORS ML Series The Model ML pressure transducers combines the latest in ASIC technology with our proven stainless steel design.
135 www .honeyw ell.com/sensing PRESSURE SENSORS VENT HOLE (GAUGE UNITS ONL Y) -OUT +OUT -IN +IN CERAMIC SHOWN (COMP . UNITS ONL Y) Ø 16,98 (0.668) CKT CAVITY A 1 30,0 (1.22) 17,78 (0.70) 11,43 (0.45) .000 9,9 (0.39) 50,0 (2.0) NOMEX INSULATED STRIP CABLE W/ 2,54 (0.
136 www .honeyw ell.com/sensing PRESSURE SENSORS 13mm Series 1/8 in - 27 NPT 50,0 mm (2.0 in) Nomex ribbon cable MEASUREMENT TYPE PRESSURE RANGE OUTPUT TYPE REFERENCE Absolute 0 psi to 5,000 psi 148 m.
137 www .honeyw ell.com/sensing PRESSURE SENSORS SPT Series The SPT stainless steel devices are designed for pressure applications that involve measurement of hostile media in harsh environments and will accommodate any media that will not adversely attack 304 or 316 stainless steel wetted parts.
138 www .honeyw ell.com/sensing PRESSURE SENSORS F1 Series All F1 pressure transducers are manufactured in our Class 10 clean room environment. Our flow-through pressure transducers are specifically designed for the semiconductor industry .
139 www .honeyw ell.com/sensing PRESSURE SENSORS OPTIONS VF 1/4 in Female Face Seal Bendix Male Connector MEASUREMENT TYPE PRESSURE RANGE REFERENCE Compound -14.7 psig to 100 psig S14VFV100CB VM 1/4 in Male Face Seal Bendix Male Connector MEASUREMENT TYPE PRESSURE RANGE REFERENCE Compound -14.
140 www .honeyw ell.com/sensing PRESSURE SENSORS TLD Series OPTIONS Flow-through/Output Signal 4 mA to 20 mA MEASUREMENT TYPE PRESSURE RANGE CONNECTIONS REFERENCE Compound -14.7 psig to 100 psig 1/4 in. OD 0.035 in. wall, 1/4 in long tube stub TLDF4CVT4V100CP Compound -14.
141 www .honeyw ell.com/sensing PRESSURE SENSORS 6,4 0.25 4,57 0.18 47,0 1.85 11,2 0.44 24,1 0.95 75,2 2.96 56,9 2.24 11,2 0.44 24,1 0.95 81,5 3.21 38,1 1.50 z s 38,1 1.50 100,9 3.97 42,7 1.68 CABLE 2 COND 1,8 m (6 ft) CABLE 2 COND 1,8 m (6 ft) z s 38,1 1.
142 www .honeyw ell.com/sensing PRESSURE SENSORS COMMON V out +V 0,95 [0.04] 0.43 [0.015] GT 150 SERIES - 3 PIN 1, 37 [0.05] 7/16-20UNF GLAND PER MS33656 (3-904 O-RING SEAL NOT PROVIDED) ST AINLESS STEEL OR PLA TED CRS HOUSING COMMON V out +V 0,95 [0.
1 www .honeyw ell.com/sensing SENSING AND CONTROL PRODUCTS HONEYWELL SENSING AND CONTROL PRODUCTS Selecting the right sensor or switch for your application has never been easier .
2 www .honeyw ell.com/sensing INTRODUCTION Relays General-purpose power relays and relay sockets designed for a wide range of applications that require stability and reliability . Resolvers Absolute position sensors which provides high angular accuracy , high resolution and repeatability under severe environmental conditions.
3 www .honeyw ell.com/sensing Sales and Service Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorised Distributor or Sales Representative, contact your local sales office or: INTERNET : www.
W arranty/Remedy Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective.
Een belangrijk punt na aankoop van elk apparaat Honeywell Switches and Sensors (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Honeywell Switches and Sensors heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Honeywell Switches and Sensors vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Honeywell Switches and Sensors leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Honeywell Switches and Sensors krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Honeywell Switches and Sensors bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Honeywell Switches and Sensors kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Honeywell Switches and Sensors . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.