Gebruiksaanwijzing /service van het product 3C900 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 40
Etherlink XL PCI Network Interface Card 3C900 Installation Guid e.
Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.
1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media.
1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.
2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media.
2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) .
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2.
3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer .
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue.
3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version 3.11 4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver.
4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) .
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2.
4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer .
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 25 Set your IP address information in the “TCP/IP Configuration” dialog box, and click “OK”.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue.
4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0.
.
Version Number 3C900 Rev. 1.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) 3C900 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) 3C900 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) 3C900 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) 3C900 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) 3C900 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) 3C900 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) 3C900 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) 3C900 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
