Gebruiksaanwijzing /service van het product 72H3482 van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 41
T urbo16/4 T oken Ring Network ISA Adapter 72H3482 Installation Guide.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Workgroups Requirements • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.
1 Connecting to a Netware 3.12 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.
1 Connecting to a Netware 3.12 Server Windows 95 SR2.
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Workgroups Requirements • HP Vectra VL8 with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.
2 Connecting to a Netware 4.11 Server Windows for Workgroups ❒ NetWare Client-32 ❒ NetBIOS ❒ IEEE 802.2 8 Select the Continue button. 9 At the “IBM LAN Client Configuration” screen, use the defaults and select the Install button. 10 Insert disks 2 – 4 when prompted.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.
2 Connecting to a Netware 4.11 Server Windows 95 SR2.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Workgroups Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon.
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 12 Select “IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2 only” and click on “OK.” 13 Accept the default “Network Drivers” and click on “Close.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 When Windows 95 has loaded, click on “Start” then “Settings” and open the “Control Panel.” 11 Double-Click the “Network” icon and click on “Add.” 12 Select to add an “Adapter”, click on “Add” and then click on “Have Disk.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 Windows NT Workstation Version3.51 Requirements • HP Vectra with Windows NT Workstation 3.51 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 10 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer. 11 Insert the Windows NT Workstation CD. 12 In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version3.51.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra VL8 with Windows NT Workstation 4.0 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 10 In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”.
4 Connecting to a Windows NT 4.0 Server Windows for Workgroups 4 Connecting to a Windows NT 4.0 Server Windows for Workgroups Requirements • HP Vectra with Windows for Workgroups 3.11 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.
4 Connecting to a Windows NT 4.0 Server Windows for Workgroups 5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.” 6 Make any changes, exit LANAID, and remove the drivers diskette. 7 Reboot the machine to Windows, open the “NETWORK” folder, and double-click the “NETWORK SETUP” icon.
4 Connecting to a Windows NT 4.0 Server Windows for Workgroups on “OK.” 13 Accept the default “Network Drivers” and click on “Close.” • IBM Token-Ring ISA Adapter, NDIS2 only [NDIS2] • Microsoft NetBEUI • IPX/SPX Compatible Transport with NetBIOS 14 At the “Network Setup” dialog box, click “OK.
4 Connecting to a Windows NT 4.0 Server Windows for Workgroups.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 • Microsoft Windows 95 SR2 media.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 7 Reboot the machine and allow it to boot to Windows 95. 8 Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card. If you are using a Vectra VL8, go directly to step 9. If you are using a Vectra VE7/VE8, follow the instructions below to complete the installation.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 “Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Workgroup name and Computer description, contact your network administrator) 16 When prompted for your Windows 95 CD-ROM, click on “OK.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 Windows NT Workstation Version3.51 Requirements • HP Vectra VL8 with Windows NT Workstation 3.51 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 10 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer. 11 Insert the Windows NT Workstation CD. 12 In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version3.51 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra VL8 with Windows NT Workstation 4.0 installed. • IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 10 In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0.
.
V ersion Number IBM T urbo 16/4 Rev .1.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) 72H3482 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) 72H3482 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) 72H3482 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) 72H3482 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) 72H3482 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) 72H3482 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) 72H3482 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) 72H3482 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
