Gebruiksaanwijzing /service van het product 8505 8 mm van de fabrikant HP (Hewlett-Packard)
Ga naar pagina of 45
8505 8mm Cartridge Tape Drive User’s Guide Order Number: EK-STWCT-UG. E01.
Fifth Edition,December 1994 The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document.
Order Number: EK–STWCT–UG. E01 iii Contents Revision Record ................................................................ .......................................... v About This Guide ............................................................
StorageWorks 8505 8mm Cartridge Tape Drive iv Order Number: EK–STWCT–UG. E01 Appendix A Product Specifications Appendix B Product Notes for Novell ™ and MS-DOS ™ Appendix C Product Notes for Sun ™ Appendix D Product Notes for IBM™ RS/6000 Appendix E Product Notes for Hewlett-Packard Reader Comment Form .
Order Number: EK–STWCT–UG. E01 v Revision Record This Revision Record provides a concise publication history of this guide. I t lists the manual revision levels, release dates, and reasons for the revisions. It also describes how the changes to affected pages are marked in the guide.
Order Number: EK–STWCT–UG. E01 vii About This Guide This section identifies the users of this guide and describes the contents and structure. In addition, it includes a list of conventions used in this guide.
StorageWorks 8505 8mm Cartridge Tape Drive viii Order Number: EK–STWCT–UG. E01 Appendix B: Product Notes for Novell ™ and MS-DOS ™ Product Notes for Novell and MS-DOS provides information for the system administrator.
About This Manual Order Number: xxx-xxx-xxx iii Cleaning cartridge, 3 cleaning passes . . . . . 727113 Cleaning cartridge, 12 cleaning passes . . . . 727386.
Order Number: EK–STWCT–UG. E01 1–1 1 Introduction This chapter provides a product overview of the StorageWorks 8505 8mm Cartridge Tape Drive, outlines its features, and describes the formats it can read and write.
StorageWorks 8505 8mm Cartridge Tape Drive 1–2 Order Number: EK–STWCT–UG. E01 Option SWXTE-AA is a configuration in which one or two 8mm tape drives is installed in a device carrier, and the device i s subsequently placed in a StorageWorks drive expansion unit.
Chapter 1 Introduction Order Number: EK–STWCT–UG. E01 1–3 Figure 1–3 Option SWXTE-AB: Two Tape Drives in a Device Carrier Option SWXTE-AC is a configuration in which an 8mm tape drive is installed in a desktop expansion unit. Figure 1–4 shows the tape drive as it is shipped to you.
StorageWorks 8505 8mm Cartridge Tape Drive 1–4 Order Number: EK–STWCT–UG. E01 1.3 Support for Four Data Formats The StorageWorks 8505 8mm Cartridge Tape Drive can read and write data in four for.
Chapter 1 Introduction Order Number: EK–STWCT–UG. E01 1–5 1.4 Support for Partitioned Tapes Some operating systems provide support for tape partitions. With these systems, the tape drive can read and write tapes containing either one or two partitions.
Order Number: EK–STWCT–UG. E01 2–1 2 Installation and Initial Power ON This chapter refers you to the installation document you need. I t also provides the steps you should follow for the initial power on of the StorageWorks 8505 8mm Cartridge Tape Drive.
StorageWorks 8505 8mm Cartridge Tape Drive 2–2 Order Number: EK–STWCT–UG. E01 • SWXTE-AB: This option number identifies a configuration i n which a second cartridge tape drive is installed i n a device carrier. For installation instructions, refer to the same documents listed i n the preceding bullet.
Order Number: EK–STWCT–UG. E01 3–1 3 Operating the Cartridge Tape Drive This chapter describes how to operate the 8505 8mm Cartridge Tape Drive. It also includes information about using a data cartridge.
StorageWorks 8505 8mm Cartridge Tape Drive 3–2 Order Number: EK–STWCT–UG. E01 3.1.1 Unload Button The unload button is the only operator control on the cartridge tape drive. NOTE The unload button can be used to clear hardware errors. I f a hardware error occurs, press the unload button to reset the tape drive.
Chapter 3 Operating the Cartridge Tape Drive Order Number: EK–STWCT–UG. E01 3–3 Table 3–1 States Indicated by LEDs Drive State Top LED (errors) Middle LED (SCSI)* Bottom LED (motion) POST (1st.
StorageWorks 8505 8mm Cartridge Tape Drive 3–4 Order Number: EK–STWCT–UG. E01 Before loading a data cartridge into the drive, ensure that the write-protect switch is set correctly for the desired operation. You can use a ball-point pen or similar instrument to set the write-protect switch.
Chapter 3 Operating the Cartridge Tape Drive Order Number: EK–STWCT–UG. E01 3–5 3.5 Load Time Once a data cartridge has been inserted, the drive requires approximately 35 seconds to load the data cartridge and position the tape (assuming that the data cartridge has been rewound).
Order Number: EK–STWCT–UG. E01 4–1 4 Cleaning the Cartridge Tape Drive This chapter describes how to use the cleaning cartridge t o clean the tape heads and tape path of the StorageWorks 8505 8mm Cartridge Tape Drive . The heads and tape path of the StorageWorks 8505 8mm Cartridge Tape Drive should be cleaned on a regular basis.
StorageWorks 8505 8mm Cartridge Tape Drive 4–2 Order Number: EK–STWCT–UG. E01 4.2 Using the 8mm Cleaning Cartridge CAUTION To prevent contamination of the tape drive and damage to the heads, do not use the cleaning cartridge for more than the number of cleaning cycles specified on the cartridge label.
Chapter 4 Cleaning the Cartridge Tape Drive Order Number: EK–STWCT–UG. E01 4–3 Figure 4–1 Cleaning Cartridge 4.3 Exercising the Cartridge Tape Drive You might find it useful to perform the pro.
StorageWorks 8505 8mm Cartridge Tape Drive 4–4 Order Number: EK–STWCT–UG. E01 2. Locate a data cartridge and ensure that its write-protect switch has been set correctly for the desired operation. 3. Insert the data cartridge into the tape drive with the label side up and the write-protect switch facing you.
Order Number: EK–STWCT–UG. E01 A– 1 A Product Specifications This appendix lists the product specifications for the StorageWorks 8505 8mm Cartridge Tape Drive.
StorageWorks 8505 8mm Cartridge Tape Drive A – 2 Order Number: EK–STWCT–UG. E01 Transfer rate (sustained): 500 KBytes/sec. (native) 1 MBytes/sec. (compressed) 1 Power on diagnostics: approximately 30 seconds Buffer size: 1 MByte Max. search speed: 7.
Appendix A Product Specifications Order Number: EK–STWCT–UG. E01 A–3 SCSI Command Set ( Cont'd ) Mode Sense Load/Unload Receive Diagnostic Results Send Diagnostics Prevent/Allow Medium Remo.
Order Number: EK–STWCT–UG. E01 B–1 B Product Notes for Novell, ™ MS-DOS, ™ and Windows NT ™ This appendix provides information for the system administrator. It should be read before installing and using the SWXTE tape drive SBB with a host system operating under the Novell, MS-DOS, MS-DOS/Windows or Windows NT operating systems.
Order Number: EK–STWCT–UG. E01 C–1 C Product Notes for Sun ™ This appendix describes how t o include cartridge tape drive SWXTE in a SUN SPARC system running Solaris 2.3 (or later) and SunOS 4.1.x. The information covers the installation of the SWXTE tape drive hardware and configuring the system to communicate with the drive.
StorageWorks 8505 8mm Cartridge Tape Drive C–2 Order Number: EK–STWCT–UG. E01 – the first string ( DEC EXB-8505 8mm Helical Scan /w Compression ) is the name given to the drive. – the second string ( 16 ) is the length of the vendor ID provided by the SCSI "inquiry" command.
Appendix C Product Notes for Sun ™ Order Number: EK–STWCT–UG. E01 C–3 At this time the tape is configured in the /dev directory with "rst" (rewind on close) and "nrst" (no rewind on close) format.
StorageWorks 8505 8mm Cartridge Tape Drive C–4 Order Number: EK–STWCT–UG. E01 C.2.2.2 Dump Parameters for the Tape Drive The parameters that should be used when running the dump utility with the.
Appendix C Product Notes for Sun ™ Order Number: EK–STWCT–UG. E01 C–5 C.2 Modifications Required for Solaris™ 2.3 (or later) C.2.1 Installation Procedure NOTES 1. The “SWXTE” designation in the following procedure is the StorageWorks product name for Exabyte EXB-8505.
StorageWorks 8505 8mm Cartridge Tape Drive C–6 Order Number: EK–STWCT–UG. E01 – The third parameter ( 1024 ) is the block size in bytes. – The fourth parameter ( 0x1639 ) defines the options selected.
Appendix C Product Notes for Sun ™ Order Number: EK–STWCT–UG. E01 C–7 The system compiles the kernel and creates special files in /dev so that i t ca n communicate with the SWXTE. Since you booted the system using the verbose switch, the system displays all of its SCSI targets.
StorageWorks 8505 8mm Cartridge Tape Drive C–8 Order Number: EK–STWCT–UG. E01 Verify that the “ passwd ” file was saved to tape using the following command: tar tvf /dev/rst4 The system responds with /etc/passwd The installation and verification procedure is now complete.
Order Number: EK–STWCT–UG. E01 D–1 D Product Notes for IBM ™ RS/6000 This appendix provides information for the system administrator. It should be read before installing and using the SWXTE tape drive SBB with a host system with the AIX 3.2.5 (or later) operating system.
StorageWorks 8505 8mm Cartridge Tape Drive D– 2 Order Nu Example: # lsdev –Cc tape Name Status Location Description rmt0 Available 00–03–00–50 Other SCSI Tape Drive Next, type: # chdev –l .
Appendix D. Product Notes for IBM RS/6000 Order Number: EK –STWCT–UG. E01 D– 3 NOTES 1. The values of density setting # 1 and # 2 are derived from tape drive attributes that can be set using SMIT. Typically, density setting # 1 is set to the highest possible density for the tape drive, while density setting # 2 is set to a lower density.
Order Number: EK–STWCT–UG. E01 E–1 E Product Notes for Hewlett-Packard This appendix describes how t o include the tape drive SBB in an HP 9000 Series 700 system running HP-UX 9.05 (or later) and Series 800 system running HP-UX 9.04 (or later). The information covers configuration of the host system to communicate with the tape drive.
StorageWorks 8505 8mm Cartridge Tape Drive SBB E–2 Order Number: EK–STWCT–UG. E01 this time will check the kernel to determine if the necessary drivers are built in, displaying the results. If necessary, the program will rebuild the kernel. If this occurs, you will have to reboot the system in order to use the tape drive.
Appendix D. Product Notes for Hewlett-Packard Order Number: EK–STWCT–UG. E01 E–3 Example: If you were to install a tape drive SBB on the main (core) SCSI bus and in slot location 4 of the Storag.
StorageWorks 8505 8mm Cartridge Tape Drive SBB E–4 Order Number: EK–STWCT–UG. E01 E.2.1.6 Verification Use the following command to verify that the “passwd” file was written to tape: tar tvf.
.
Reader’s Comments Manual Order Number: EK- STWC T-U G. E01 8505 8mm Cartridge Tape Drive User's Guide Digital is committed to providing the best possible products and services. Since our manuals are important components of our products, we value your comments, corrections, and suggestions for improvements.
Een belangrijk punt na aankoop van elk apparaat HP (Hewlett-Packard) 8505 8 mm (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP (Hewlett-Packard) 8505 8 mm heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP (Hewlett-Packard) 8505 8 mm vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP (Hewlett-Packard) 8505 8 mm leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP (Hewlett-Packard) 8505 8 mm krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP (Hewlett-Packard) 8505 8 mm bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP (Hewlett-Packard) 8505 8 mm kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP (Hewlett-Packard) 8505 8 mm . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
