Gebruiksaanwijzing /service van het product DT-10 van de fabrikant HP
Ga naar pagina of 20
SmartShare ® User Manual User Manual RM-20, RM-50, RM-100, RM-200, RM-500, RM-1000 DT-5, DT-10, DT-20, DT-50 Firmware: 1.11 Copyright © SmartShare Systems, April 2008.
SmartShare ® User Manual – 1 – Introduction The SmartShare ® is an integrated bandwidth manager and NAT router with built- in DHCP server and optional anti terror logger . The SmartShare can sup plement an existing Internet router or re place a traditional N AT router.
SmartShare ® User Manual – 2 – T able of Content s Introduction .................................................................................................................. .. 1 Key Features .................................................
SmartShare ® User Manual – 3 – DHCP Proxy ............................................................................................................ 12 Built-in DHCP Server Options ...............................................................
SmartShare ® User Manual – 4 – Inst allation Guide 1. Connect to the local network equipment Connect the LAN port on the SmartShare to any Ethernet port on the local network switch, using a straight Ethernet patch cable. 2. Start the setup menu Use a web browser on a PC connected to the local network to start the setu p menu in the SmartShare.
SmartShare ® User Manual – 5 – The SmartShare Bandwid th Management System This section describes the SmartShare bandw idth m anagement system in details, and is written for network experts only.
SmartShare ® User Manual – 6 – Dynamic Quality of Service The SmartShare always prioritizes timing cr itical traffic flows, such as IP telephony and online gaming, over ordinary traffic flows. The priority assignment is based on traffic pattern analysis of each flow.
SmartShare ® User Manual – 7 – S t atus menu This page shows the current stat us of the Internet connection. System This shows system status, such as the na me, location and contact inform ation,.
SmartShare ® User Manual – 8 – When the download bandwidth becomes overloa ded, the SmartShare starts restricting the heavy users by activating the Download Limiter.
SmartShare ® User Manual – 9 – Internet/W AN (Wide Area Network) configuration menu The Internet service provider usually supplies all the informa tion that is needed to s e t the WAN configuration in a letter accompanying the conf irm ation of the Internet subscription.
SmartShare ® User Manual – 10 – External Servers (optional) NTP Server If the system time must be s ynchronized with an external NTP server, its host name or IP address can be set. The default configuration is: (em pty) LAN (Local Area Network) configuration menu Network Setup The router name must be set.
SmartShare ® User Manual – 11 – NAPT (Network Address and Port T ranslation) configuration menu Port Forwarding to Local Servers These fields can be configured to make se rvers on the local network available from the Internet. If the port number of a local network devi ce can not be configured on the device, e.
SmartShare ® User Manual – 12 – Advanced configuration menu Remote Management The built-in web based setup menu can be changed to a different port.
SmartShare ® User Manual – 13 – Outgoing SMTP Connections The SmartShare has 4 different modes for handling outgoing SMTP (TCP port 25) connections from the local network to the WAN: • Allow All. • Allow to External Server only. • Redirect all to External Server.
SmartShare ® User Manual – 14 – Bandwidth User Groups Bandwidth User Groups can be used to configure which IP address ranges the bandwidth manager controls, and optionally set per-user bandwidth lim its within each user group. The following can be configured for each user group: • First and last IP address.
SmartShare ® User Manual – 15 – System menu Download Firmware The SmartShare firmware can be upgraded from the firmware server at S martShare Systems or any other firmware server. Firmwa re upgrade is a two step process. First, enter the URL of the firmware to be dow nloaded, and click the Download Firmware button.
SmartShare ® User Manual – 16 – Managers configuration menu Multiple users can manage and conf igure the SmartShare. The following can be configured for each manager: • User Name (required). • Password. Password for access to the web management interface.
SmartShare ® User Manual – 17 – Security Considerations Physical Access The SmartShare should be installed in a locked patch panel. Anyone with physical access to the SmartShare can power it off, disconnect it or change the conf iguration via the Serial port.
SmartShare ® User Manual – 18 – Q: After powering on the SmartShare, th e W AN connection to the ISP is not established. A: First, verify that everything is correct ly connected.
SmartShare ® User Manual – 19 – LED Indicators The two LEDs for each LAN / WAN / Ext1 / Ext2 Ethernet port indicate as follows: LINK/ACT = Off No connection. LINK/ACT = On, 10/100 = Off 10Mbit li nk to other device established. LINK/ACT = On, 10/100 = On 100Mbit li nk to other device established.
Een belangrijk punt na aankoop van elk apparaat HP DT-10 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP DT-10 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP DT-10 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP DT-10 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP DT-10 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP DT-10 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP DT-10 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP DT-10 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
