Gebruiksaanwijzing /service van het product LC 2000R van de fabrikant HP
Ga naar pagina of 194
HP NetServer LC 2000/2000r Installation Guide HP Part Number D8514-90000 Printed Novem ber 1999.
ii Notice The inf ormation c ontaine d in this docum ent is su bject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this m aterial, includ ing, but not lim ited to, the i mp lied warrantie s of merchantability a nd fitness for a parti cul ar pu rpos e .
iii Cont en ts 1 Setti ng Up the HP NetServer ....................................................................... 1 Ins ta llat ion Gu id e line s.................................................................................... 1 Pedestal I nstal l ati on .
Contents iv Hot Swap Confi gurat i on Options .............................................................. 38 Ca bling Co nfig urat ions ............................................................................ 43 Ins talling Hot Sw ap Ha rd D rives .
Contents v Attac h ing the Fro n t B e ze l ........................................................................ 94 Conti nui ng wit h the Rack Install ati on Proc ess .............................................. 95 9 C onnec ting t he M onit or, K ey board , Mous e , and U PS .
Contents vi Over vi ew ....................................................................................................127 Us ing In format ion As s i stan t ........................................................................127 Gett ing He lp .
Contents vii Envi ronm ent al Requi rem ents ......................................................................163 Physic al Requir em ent s ...............................................................................16 4 Vi deo S uppor t .....
.
1 1 Setting Up the HP NetSer v er Install ation Guidelines This I n stallatio n Guide is f or the H P NetSe r ver LC 2000 pede sta l mode l , and the H P NetSe rver LC 2000 r rack-opti mi zed mo del. L C 2000r (Rack-mounted Model ) LC 2000 (Pedestal M o del) Fi gu r e 1- 1.
Chapter 1 Setting Up th e HP NetServer 2 Us e t h e r emova bl e a n d r eu s a bl e r ac k -m ou n tin g h an d l e s t o m ove a n d p la c e th e LC 2 00 0r in th e ra ck . Rem o ve t h e h an dles on l y w h en y ou h ave secur ed th e HP Net S er ver t o th e r a ck sli d es .
Chapter 1 Setting Up th e HP NetServer 3 CAUTI ON Th e H P Ne t Server LC 2 000 we ighs app r oximately 80 lbs. (36 kg), w h i ch m a y be mo r e than o n e pe r son should lift.
Chapter 1 Setting Up th e HP NetServer 4 11 . Conn ect al l ot h e r ex t er n al ca bl es t o th e r ear of th e HP Net S er ver. 12. Ob tain t he rele ase his tory of th e HP Net Serv er Nav igat or CD-ROM pro v ided w ith t h e H P Ne tSe rve r to e nsu r e y ou hav e the late st N avig ato r CD-R OM.
Chapter 1 Setting Up th e HP NetServer 5 Rack M ount Install at ion Foll o w t h e setu p st ep s in th e ex a ct or d er sh own bel o w for a s u cces s fu l r a ck insta llat ion. Ski p any step s that do no t ap p ly to y o ur ins tal latio n. Show n Rem oved fo r De ta il Figure 1-3.
Chapter 1 Setting Up th e HP NetServer 6 3. If you h a ve opt i on al it em s to a d d t o th e HP NetSer ver ( m emor y, a cces s or y boa r ds, ma ss stor ag e, or pr ocess ors) , r em ove th e bezel an d the top cover . ◊ If th e re are n o o ptio nal ite ms to i nstal l, s kip to S tep 12.
Chapter 1 Setting Up th e HP NetServer 7 13 . Conn ect th e mon i t or , k eyb oa r d, and mou se t o th e r ear of th e HP Net S er ver. Re f e r t o Ch a pt er 9, "Con n ect i n g Mon i tor , Keyb oa r d, M ou s e , a n d UPS. " 14 . Conn ect al l ot h e r ex t er n al ca bl es t o th e r ear of th e HP Net S er ver.
.
9 2 Controls, Ports, and Indicators Front of HP NetServer Th i s cha p t er d escr ibes th e contr ols, p ort s an d in di ca t or s on th e fr on t an d r ear of the H P NetSe rver LC 20 00 and L C 2000r. Fi gures 2-1 and 2-2 below sh ow th e H P NetServers LC 2 000/ LC 2000r as pedes tal a n d rack models r espec t ively .
Chapt er 2 Cont ro l s, Port s, and Indi cat ors 10 Power , Res et, and Key b oard Lo ck Bu tton s The co n tr ol but t ons s h ow n i n Figures 2-1 and 2-2 are des crib ed i n the T a ble 2-1 .
Chapt er 2 Control s, Port s and Ind ic ator s 11 Fron t Pan el LED I n dicator s Table 2-2. Co m ponent I ndi cators LED IC ON Descrip ti on Disk LE D This Disk L ED has tw o d istinc t iv e state s: o ff fo r inac tive ope r atio n b linkin g G ree n fo r SCSI d rive act ivity .
Chapt er 2 Cont ro l s, Port s, and Indi cat ors 12 Hot Sw ap Disk Dr i ve Indicators Eac h of the H o t Sw ap ha rd d isk d rive s has tw o LED i ndica tors , one f o r o peratio nal st atu s a nd o ne f or ac t iv ity status.
Chapt er 2 Control s, Port s and Ind ic ator s 13 Non-H ot Swap Dev ice In dicator s T he i ndic ato rs f o r no n-H ot S w ap de v ice s, w hich p rov ide o pe r atio n al s tatu s, are also show n in Figu r e 2 -3. T h e i n dicato r s show n in Fig ure 2-3 also app l y t o th e rack-mou n t mode l (LC 2000 r ).
Chapt er 2 Cont ro l s, Port s, and Indi cat ors 14 Rear Panel Ind icators and Ports Th e H P Net Ser ver’ s rear pan el in cl u d es com m uni ca ti on p or ts, th e A C power inlets, a nd t h e NetSe r ver’ s po we r supplies . Fi g ur e 2 - 4 sh ows th e r ear of th e HP NetSer ver.
Chapt er 2 Control s, Port s and Ind ic ator s 15 Pow er Su pply Modu le I ndica tor Each H P NetServe r po wer supply module has a n indicato r a s s h ow n i n Figure 2-5, and eac h powe r supply h a s i t s ow n pow er cord co nn ection.
Chapt er 2 Cont ro l s, Port s, and Indi cat ors 16 Communi c at i o n Port s Th e conn ector s on th e HP Net S er ver’ s rear p an e l ar e sh own i n Fi g ur e 2- 6 and desc r ibed b el ow. Keyb oard Mo use Video NIC (Emb edded ) Se r ial Mana gement Fi gure 2-6.
Chapt er 2 Control s, Port s and Ind ic ator s 17 NIC In d icato rs The e m be dded N IC (Netw ork Inte r fac e Ca rd) has two LEDs asso ciate d w ith it, whi ch can on l y b e se en from th e r ear of th e HP Net S er ver. S ee Fi g ur e 2 - 7 an d Tab le 2-6 .
Chapt er 2 Cont ro l s, Port s, and Indi cat ors 18 A ppl y ing Power to the HP NetServer Po wering Up the HP NetServer 1. En sur e th e HP NetS er ver’ s power cor d or p ower cor ds ar e con n ected to th e pow er source. See Figure 2-4. 2. Pr ess t h e Po wer butto n on the f ro n t co n trol pa n el.
Chapt er 2 Control s, Port s and Ind ic ator s 19 Sleep S tate s (AC PI ) The H P Ne tServe r supports the A CPI (Adva n ced Conf igu ratio n and Po wer Int er face) st and ard, wh i ch is a key comp on en t of a NOS’ s direc ted power manage me nt.
Chapt er 2 Cont ro l s, Port s, and Indi cat ors 20 NOT E T he H P N e tS e rv er p o w er b u tt o n w il l f o rc e a p o w e r do w n with out waitin g fo r th e NOS to g racefull y sh ut down th e sy stem i f t h e po wer butto n is p r essed a nd held i n exc ess of fo ur secon ds.
21 3 Opening and Closing the HP NetServer Introduct ion T h is ch apte r des cribe s ho w to s afe l y exte n d the r ac k- mou nted H P N etSe r ve r LC 2000 r out of the rack and h ow to remov e and replace th e co vers f rom the H P NetServer LC 2000 r and th e pede stal m odel, H P NetServe r LC 2000 .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 22 Removing the HP NetServer’s Covers Th e HP Net S er ver’ s cover s ar e desi gn at ed t op an d bott om f or th e r a ck - m ount ed v e rsio n a nd l e f t a nd ri g ht f o r t he pe de s ta l v e rs io n .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 23 3. Pr es s th e power s wit ch on th e H P Net Ser ver’ s co n tr ol pan el when pr om pt e d b y th e oper a t i n g syst em . No rmally , t his co mple tes t h e po w er do wn p r oc edure .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 24 6. Sw ing t h e b ezel o pe n to the le ft to ac ce ss th e B eze l Re lease Tab. 7. Pre ss dow n on t he b lue R ele ase Tab as s how n in Fig u re 3-2 to r ele ase t h e b eze l f rom t h e c hassis .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 25 9. Unscrew t h e sl ide se curi ng sc r ew (2) on eac h b r acket sec urin g t h e c hassis to th e column a da p t er on ea ch si d e of th e r a ck.
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 26 Figure 3-4. E xtending the HP NetServe r LC 2000 r CAUT IO N T o pr even t da m a ge t o t h e cov er s, su pp or t th e cover a s you r e m ove i t fr om th e HP N e t S er ver . Th e N et Ser ver ’s cove r s a r e he av y .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 27 To p C o v e r Bottom Co ver Cover Pul l Figur e 3-5. Removing H P Ne t Server LC 2000r Cove r s 15 . If n eces s a r y , r emove th e bottom cover by loos en in g th e th umbscr ew at th e fr on t of t h e H P Net Ser ver wi th on e han d.
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 28 24 . Sl i d e th e HP NetS er ver in t o th e ra ck . 25. To r ep lace the f ro nt b eze l, rev erse the p roc edure by po sitio ning the b e zel over th e h in ge pin s at th e fr ont of th e HP Net Ser ver’ s ch a s si s .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 29 3. Pr es s th e power s wit ch on th e H P Net Ser ver’ s co n tr ol pan el when pr om pt e d b y th e oper a t i n g syst em . No rmally , t his co mple tes t h e po w er-do w n pro ce dure .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 30 6. T o re move the lef t side co ver, use t h e key prov i ded to u n l ock t h e Mass St or a ge C a ge an d rel ea s e th e left si d e cov er .
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 31 12. To r ep lace the lef t side co ver, p o sitio n t h e c ov er’s tab s n ext to t he r esp ect i ve h ol es a l ong th e ou t er ed g e on th e s i d e of th e ch a ss i s. 13 . Sl i d e th e cover t owar d th e r ear.
Chapt er 3 Openi ng and Cl osi ng t he HP NetS erv er 32 Rem ovin g the Pede sta l The pede sta l v ersion o f th e H P Ne t Server LC 2000 mounts to an a nti-tip pe destal, w h ich c an b e e asily remo ved , if n ec ess ar y . 1. Perfo rm Steps 1-4 i n th e p r ev ious s ec tion, "Re m oving Co ve r s – Pedes t a l (LC 2000) .
33 4 Installing M ass Storage Dev ices Introduct ion T h is c hapte r d es crib es h ow to insta ll the in ternal mas s sto rage de v ice s, inc lu ding th e in t ern a l S C S I Hot S wa p h a r d di s k dr i ve s a n d th e op ti on al T a p e Ba c k u p (DA T ) Dri ve.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 34 Driv e Bay Shelves Th e n on -h ot sw a p dr ives in cl u d e th e I DE CD- ROM an d the 3. 5 in c h fl ex i bl e d i sk drive s w h ich are st anda rd fo r all H P NetServe r models (L C 2000/2000 r ) an d ship w i t h each u nit.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 35 Yo u c an c hange t his b oo t orde r usi ng the Setu p U tility (B IO S) and the S CSI Co nfigu r atio n Utili ty during the boot p r oces s . Ref e r t o Ch a pt er 1 0 " C on fi g ur in g t he H P N et S erv e r" f o r mo re i nf o rm at io n.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 36 Mass S torage Gu idelin es • Gen er a l Gu i d elin es ◊ Use ca r e wh en un pa ckin g an d han dlin g th e d i sk dr i ves. Th e h ar d di s k dr i ves ar e ver y su s c ep t i bl e t o m ech an ical sh ock an d can be easil y da m aged by a drop as short a s o n e-quarte r of an in ch.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 37 • SCSI Dri ve Addressin g ◊ T he d riv es in the H ot S wap Cage a r e autom atic ally assig ned S CSI addr esses by t h e HP NetServer .
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 38 If t h e r e ar e ga p s in th e ca g e, th e dr ives m a y not r ecei v e t h e p r oper v entilatio n a n d c ould suf f er t he r mal dama ge.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 39 1 1 01 23 8 9 A A A A A A 2 2 Slo t Nu m ber Di sk Dri ve SCSI Device ID SCSI Conne ctor 3 3 4 4 5 5 6 6 1 1 02 8 A A A 2 2 Sl ot Nu mbe r Di sk .
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 40 S l ot N u mb e r D is k Dri v e SCS I Devic e I D S C S I C o n necto r 1 1 0 1 2 3 8 9A A A A A A 22 33 44 5 5 6 6 Sl o t N u m be r D i sk D r.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 41 1 1 0 12 01 2 A A A B B B 2 2 Slot Number Disk Drives SCSI Device ID SCSI Connector 3 3 4 4 5 5 6 6 Con B Con A Center Line 1 1 02 0 2 A A B B 2S.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 42 Pe de s tal C on f ig ura t io ns f or SCSI Hot Swap Mass Storage Cag e Duplex Board In stalled - T w o Bus Control Co nne ct ors A and B Center .
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 43 Ca b li ng Conf ig urat i o ns There are v arious SCS I c able co n figurat i ons asso ciated w ith the HP NetS erv er an d if al l p oss i bl e SC S I d evi c es a n d con n ecti on s ar e used , th en an ad di ti on al SCSI di sk con troll er i s r eq u ir ed.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 44 SCSI C able C onfi gurat io n s Hot-Sw ap and Non- Hot Sw ap D rives (Singl e Bus Con trol - No Duple x Board In st all ed) SCSI Channel A SCSI C.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 45 SC SI Cabl e Co nfigurat io ns Hot-Swa p an d Non-Hot Swap Dr ives (T wo Bus Con trol - Dupl ex B o ard Inst alled) SC SI Chann el A SC SI Chann .
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 46 Inst all ing Hot S wap H ar d D riv es U se this se ctio n to i nsta ll H o t Sw ap hard driv es i n t he H o t Sw ap dr iv e c age . CAUT IO N Prot ec t the d riv e f r om s tatic ele ctric ity b y le aving it in its ant i-sta tic b ag until yo u a r e r eady to insta ll i t.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 47 3. Remove an y drive space r s, if n ece ssary : a . Sl i de t h e dr i ve sp a cer ba ck, a f r a c t i on of an i n ch a wa y fr om you r bod y a s you fa ce t h e fr ont of t h e dr i ve . Driv e sp ac ers att ach to the dis k d rive mod ule w ith f our s mall f ee t.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 48 CAUTI ON T o pr even t sn ap p in g off th e han dle do n ot us e ex tr eme for ce when openin g it.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 49 CAUTI ON Use cautio n w h e n ha n dli n g t h e driv e to p r ev ent d amage to the fr a gil e li gh t pi p e s a s you i n ser t th e dr i ve . 5. Gen t l y sli d e th e dri ve m od u l e in to the ca g e an d st op wh en you fe el r esi stan ce.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 50 Remo ving Hot Swap Hard Dri ves CAUT I ON You m ust remo ve th e dr ive s low ly to ensur e the dri ve h eads ar e par ked pri or to remo val. Ensu re yo u fo llow th es e i nstruc tio n s c are f ully to p rev ent handli ng da mage, suc h as head sl aps o r head ac tuato r unlo c king.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 51 Installi ng Non-Hot Swap Storage Devi ces Use t h i s s ect i on t o in stal l an y o f th e n on -h ot swa p ma ss st or a g e d evi ces u sed a s a hard d r ive o r a tape b ackup sto r age.
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 52 3. If wo r king o n a pede stal- mou nte d Ne tSe r ve r, re mov e the be zel a nd ga in acc es s to the H P N etS erv er’s no n -ho t sw ap-d r ive bay s. Re f e r t o Ch a pt er 3, "O p en i n g an d C l os in g th e HP N et Ser ver .
Chapt er 4 Inst all i ng M ass St ora ge Dev ic e s 53 Connecting External SCSI Devices Th e HP Net S er ver ma y pr ovid e an ext erna l S C S I conn ector ( opt i ona l ) at th e r ear panel knoc kout as s h ow n in Figu r e 4-14 .
.
55 5 Installing A dditional M emory Introduct ion T his c hapte r p r ov ide s the i nstruc tio n s f o r inst alli n g and r e mov ing DIM Ms o n the sy stem boar d i n the H P NetSe rver LC 2000 or L C 2000 r. The v ideo m emory co m es with 2MB standard an d ca nn ot be upgraded.
Chapt er 5 Install ing Additio nal M emor y 56 Mem ory In stallation Gu ideline s • The H P NetSe rver LC 2 000/ 2000 r uses onl y 133 MH z (PC133) SDR AM DIMMs, whi ch a r e elect r i cally different fr om t h e EDO and PC100 SD RA M me mory mo dules use d in p r ev iou s H P N etSe rver mo de ls.
Chapt er 5 Install ing Additio nal M emor y 57 To inst all ad di tio n al me mo ry in the H P Ne tSe rve r , ref er to the fo llow in g proce dure. 1. To gain acc ess to the H P Ne tSe rve r , pe rfo rm o n e o f the p roc edu res lis ted bel ow.
Chapt er 5 Install ing Additio nal M emor y 58 5. In sert th e DIMM fully into th e slot, han dling the DIMM by i t s ed ges. See Figures 5-2 and 5- 3. T he reta ining cl ips s ho uld gr asp t he DIM M auto mat ically if it is inse rted pr operl y. I f t h e cli p s do n ot cl ose, th e DIMM is n ot in s er t ed cor r ectl y.
Chapt er 5 Install ing Additio nal M emor y 59 7. If th e Ne tS erve r is in a r ac k inst allat ion , retu rn t h e c h ass is into the r ac k. Re f e r t o Ch a pt er 3, "O p en i n g an d C l os in g th e HP N et Ser ver . " 8. R e-insta ll t h e b eze l onto the fro nt o f the H P Ne tServ er.
Chapt er 5 Install ing Additio nal M emor y 60 Figur e 5 -4. Remov ing a D IM M Module 6. Repeat Steps 2 throug h 5 to remov e an y additional de sired DIMMs on t h e sy s te m bo ard . NOT E En s ur e th e retain ing cl ips on th e DIMM slots for each DIMM ar e cl osed be f or e r epla cin g the cover on t o th e HP NetSer ver .
61 6 Installing A dditional Boards Introduct ion T his ch apte r de sc r ibe s ho w to i n sta ll ac ce ss o r y bo ards i nto the sy ste m bo ard o f t h e H P NetServer LC 2000/2000 r. T h e sy stem bo a r d p rov ides up to six P CI slots (P1 throug h P6), tw o of w h i ch are 64-bit slo ts.
Chapt er 6 Install ing Add itio nal Board s 62 Boot Pr io rity T his s ec tion de ta ils the H P N etSe r ve r ’ s b oo t orde r by hig h est to lo w est p r iority . Th e Net Ser ver ’ s boot or d e r ( BI O S s e a r ch or d er for a bo ot dr i ve ) s h oul d be co nside r ed w he n se lec ting a slo t o n t h e sy s tem bo ard.
Chapt er 6 Install ing Add itio nal Board s 63 I RQ Settings T he IR Q s etti ngs are au tomat ical ly ass ign ed and do n’ t r equ i re use r i nte r ve n tio n .
Chapt er 6 Install ing Add itio nal Board s 64 • Two PCI slots (P 5-P6) suppo r t f ull-l engt h 32- or 64-b it bo ar ds a t c l ock rates o f 33 MH z . T h ese s l ots o nl y suppo r t +5 VD C po wer a nd U n i versal boards. Th ese s lots h ave key s in the upper half o f the b oard slot to preve n t 3.
Chapt er 6 Install ing Add itio nal Board s 65 Shad ed re ct an gl e r epr es ents t he posi tion of sli de sw itc h. 2 Proc essor Sp ee d (Bit 1) 3 Proc essor Sp ee d (Bit 2) 4 Proc essor Sp ee d (Bit 3) 5 Cl ear Conf ig uratio n 6 Clea r Pass wo rd 8 FSB Sp eed (1 33 /10 0 M Hz ) Op e n = O ff Closed = On Re ar o f HP NetSer ver Figur e 6 -2.
Chapt er 6 Install ing Add itio nal Board s 66 5. Ga in a cces s t o th e N et Ser ver by per f or min g the ap pr op r iat e p r oced u r e for the Ne tServe r LC 2000 or t h e LC 200 0r.
Chapt er 6 Install ing Add itio nal Board s 67 8. Remove th e s lot co ver from t h e N et Se rv e r’s re a r p a nel , b ef o re i ns ta lli ng th e n ew boa r d into th e s l ot , as sh own in F i g ur e 6- 3. 1. O pen T a b 2. Li f t Lat c h 3. Remo ve Sl ot Co ver Figur e 6-3.
Chapt er 6 Install ing Add itio nal Board s 68 9. Before i nstalling t h e new PCI bo ard: ◊ Ve r ify the re is no ha n dle attac hed to it , esp ec ially if it is a f ull-le ngt h board. ◊ If it has a ha ndle att a ched, re m ove t h e h andle b efore instal ling t h e bo ar d i nto the slo t .
Chapt er 6 Install ing Add itio nal Board s 69 1. Insert Board 2. Cl ose Latch 3 . Tu r n Ta b Figure 6-4. Inst alling t he Accesso r y Board 12. Secure t h e PCI bo ar d as s h ow n in F igure 6- 4.
Chapt er 6 Install ing Add itio nal Board s 70 16. If all i n s talla tio n wo rk is c o mplete , re turn po we r to the N etSe rve r accord in g to the respecti ve NOS power up instru ct i on s.
71 7 Installing A dditional Processor s Introduct ion The H P NetSe rver LC 2 000/ 2000 r suppo rt s tw o processo r s in p ri mary a nd sec on d ar y slot s an d both pr ocess or s mu st op er a t e at th e s am e sp eed an d cach e size . The H P NetSe rver supports the Pentiu m III proce ssors at a f ro n t side b us (FSB ) spe ed of 133 MH z.
Chapt er 7 Install ing Additio nal Pro ce ssor s 72 CAUTI ON D o n ot s et th e pr ocess or sp eed swi t ch es to an y oth er sp eed , a s t his ca n resu l t in u n reli able o r i nte rmit te nt perf orm a n ce , and dat a i nteg r ity may als o be at risk .
Chapt er 7 Install ing Additio nal Pro ce ssor s 73 Installi ng the Processor T he i ns ta llatio n p r oc edu re is the s ame f or the rac k-mo unted mo de ls as f or the pe des tal mo de ls o f th e N etS erv er once yo u gai n a cce ss to th e system bo a r d .
Chapt er 7 Install ing Additio nal Pro ce ssor s 74 6. Veri fy th e p r ocessor sp eed an d FSB settin g, before in sta ll in g the sec ond proce ssor mo dul e. See F i gures 7- 1 a n d 7-2 , a nd Tab l es 7-1 and 7-2 . Bot h pr ocess or m odu l es mu st ha ve th e same cl ock s p eed , ca ch e s i z e, FS B speed , an d p r oduct n um ber .
Chapt er 7 Install ing Additio nal Pro ce ssor s 75 NOT E So me proce ss or speeds listed i n Table 7-1 may n ot be supported. Fo r th e lates t suppo rt i n fo r matio n, v i sit t h e H P w eb site : http://www.
Chapt er 7 Install ing Additio nal Pro ce ssor s 76 9. Rem ove t h e t er min ati on fr om th e second ar y pr ocess or s l ot by pr essin g in on the tab s and pulli n g d ir ectly upwards.
Chapt er 7 Install ing Additio nal Pro ce ssor s 77 10 . Rem ove t h e pr ocessor m odu l e fr om the seal ed ba g . 11 . Op en th e lat ch es on t op of th e pr ocess or slot .
Chapt er 7 Install ing Additio nal Pro ce ssor s 78 2nd VRM VRM La tc hes Fi gu r e 7- 6. I n s t all i ng V RM CAUTI ON T o pr even t da ma g e t o the V RM, d o not push on th e lar ge fl at sur face or touch th e comp on en t s on th e boa r d as yo u p u s h th e VRM car d dow n int o th e sl ot.
79 8 Rack M ounting th e HP NetServer Introduct ion T his c hapte r te lls h ow to mount the HP NetS erv er i n a n H P S ys te m/E o r Sy ste m/U rac k. The illus tr atio n be low show s the c harac te r istic s o f the S y ste m/E a n d S ystem / U r a ck s .
Chapt er 8 Rack-M ounting the HP NetS erv er 80 NOT E If y o u w a nt t o p ut y o ur N e tS e rv e r in to a th ird -p a rt y rac k no t men tioned in t he guid e, y ou may b e ab le to f in d rele va n t do cume n tatio n o n H P’ s w eb site at the f o llow ing U RL : http://www.
Chapt er 8 Rack-M ounting the HP NetS erv er 81 Safety Pr ecauti ons Alw ay s kee p the f o llow ing s af ety an d e nviro nme ntal is sue s in mi nd, esp ec ially if you in stal l th e HP NetSer ver .
Chapt er 8 Rack-M ounting the HP NetS erv er 82 Preparing the Rack Th e col u mn a da p t er s an d r a ck nu t s mu st be conn ected t o th e r a ck befor e m oun t in g th e sl i d e mech an ism. On ce th e slid es ar e cor r ectl y moun ted , t h en th e HP Net S er ver LC 2 00 0r can be in stall in g in t o th e ra ck .
Chapt er 8 Rack-M ounting the HP NetS erv er 83 1. Find th e rack-mo unt ing templ ate. If yo ur H P Ne tServ er is still in its b ox , the temp la te s hou ld be in t he acces s or ies tr ay that sit s on top of th e NetS er ver its el f. 2. Ho ld t he te mpl ate alo ngside the o utsid e f ace (f r ont) o f t h e le f t f r ont rack co lumns.
Chapt er 8 Rack-M ounting the HP NetS erv er 84 # # # # # "#" # Bottom of HP Net Serv er Ma rk t his fa ce of th e left- fr o n t and right-front co lumns. Right Lef t Fr ont of Rack r epres ents the E IA unit numb er s on t h e ra ck co lum ns .
Chapt er 8 Rack-M ounting the HP NetS erv er 85 A ttachin g the Co lumn Adapter s and Sl ides 1. Pu ll t he a nti-t ip fo o t forw ar d o ut o f the b o tto m of t h e r ack . Se e F igure 8 -6 f o r t h e ant i-tip f o o t loc ation. 2. Alig n t he lef t HP colum n ad apte r to the lef t fro nt c olum n as s how n i n Figure 8-5 .
Chapt er 8 Rack-M ounting the HP NetS erv er 86 b . The two hole s in t he mou n ting f la nge s hou ld li ne up w ith t h e c apt ive nuts (at 7th and 9th h ole s) i n the co lum n ada pte r a n d t he tw o r ack nuts you in stal l ed on ea ch r ear col u mn .
Chapt er 8 Rack-M ounting the HP NetS erv er 87 8. Fa s t en th e s l i d e’ s r ear br a ck et t o th e ra ck nut s on th e left - r ear colu mn . a. S ec ure t h e s c rew s o n ly loo se l y at first , so the br ack et ca n se ttle into t he lo wes t pos sible pos ition.
Chapt er 8 Rack-M ounting the HP NetS erv er 88 Slid e Mem ber s Ant i-ti p Foot Level er Scre w s (4) Mou nt i ng T abs Fig ure 8-7 . P ullin g Out the S lid es 3. Pull o ut b oth s lides u nti l t he sl ide me mbe r s a r e f ully e xtende d. See Figur e 8-7.
Chapt er 8 Rack-M ounting the HP NetS erv er 89 Channel(2) Figur e 8-8. Mou nti ng the HP Ne t Server on the Slides 7. Mo v e the sl ide me mbe rs in to the N etS e r ve r ’s c hanne ls u ntil b oth s lide mem ber s ar e un dern ea th al l four of th e Net Ser ver ' s h an d l es.
Chapt er 8 Rack-M ounting the HP NetS erv er 90 Figure 8-9. Re m oving th e Moun t i ng Hand l es 10. In se rt the f lathead screw s into the sli des’ h oles at the rear and t h e pa nh eads scr ews i n th e oth er four pla ces t o secu r e th e cha s si s to th e s li d es.
Chapt er 8 Rack-M ounting the HP NetS erv er 91 Figure 8-10. P ressing in t he Release L at ches 14. V erify the Ne tServ er w ill sl ide a ll t h e w a y into t h e rack, be fo re c ontinui ng wit h th e proced u r es.
Chapt er 8 Rack-M ounting the HP NetS erv er 92 WARNI N G Be f or e sl id i n g ou t t h e HP N e t S er ver LC 2 0 00r , en sur e th e an ti - ti p foot i s st il l ex t en d ed fr om th e fr o n t of t h e r a ck . A tip-o v er h aza rd ex ists , so nev er sl ide mo r e t ha n one co mpo n ent o ut of th e rac k at a t ime.
Chapt er 8 Rack-M ounting the HP NetS erv er 93 Rear o f HP NetServ er Left Rear Rack Co lumn Ca ble Ma nag em ent A rm Figur e 8-12. At t aching the Cable M anage m ent Arm 5. Attac h t he o the r fla nge of the c ab le a rm to t h e rea r co lum n of the rack w ith the tw o M-5 pan h ead T -25 Torx s c r ew s, which are included with t h e A r m.
Chapt er 8 Rack-M ounting the HP NetS erv er 94 A ttachin g the Fr on t Beze l T he f r ont b eze l att ac h es to the H P N e tSe r ve r by a h inge on the le f t and a latc h o n th e r ight. Th e hin g e ha s th r ee sp rin g-loa d ed h in g e pin s t o secur e th e bez el .
Chapt er 8 Rack-M ounting the HP NetS erv er 95 2. Pr ess do wn on t h e blue Bezel R elease Tab s how n in Figure 8-13. Figure 8-14. A ttach ing the B ezel to the NetServe r 3. Pre ss the b eze l onto the fro nt o f the H P Ne tServ er a n d r ele ase the Blu e Tab to e ngage t h e hinge pins.
.
97 9 Connecting the Monitor, Key board, Mouse, and UPS Introduct ion T his c hapte r p r ov ide s the i nstruc tio n s f o r co nnec ti ng a mon ito r, ke yb o ar d, mo use and U n interruptible Po we r Supply (UPS ) to the rea r of th e H P Ne tServe r .
Chapt er 9 Conn ecting th e M onitor , Keybo ard, M ouse, and UP S 98 NOT E I f you h a ve a c on sol e s wi t ch box , r efer t o t h e swit ch box ’ s u s e r guide f o r inst r uctio n s o n connec ting the ke y boar d, mouse , and mo n ito r.
99 10 Configur ing the HP NetServer Introduct ion This c hapte r suppo rts setting up so ftw ar e on y our HP NetSe r ver LC 20 00/2000r. Yo u may c hoo se to do this b efo r e o r af ter y o u inst all t he Ne tSe r ve r in the rack.
Chapter 10 Configurin g t he HP NetServ er 100 B efore the H P N avig ato r ma in me nu is d isp lay e d, yo u may b e pro mpte d to se t t he language, time, and da te.
Chapter 10 Configurin g t he HP NetServ er 101 Document Number X X X X Figur e 10 -1. Location of Document Nu mber on Navigator CD Yo u c an o btain t he R ele ase H isto r y an d S t atus Re po r t fo r yo ur CD-R OM in o n e of th ese wa ys: • In t er n et WWW-- http ://w ww.
Chapter 10 Configurin g t he HP NetServ er 102 T he CD -RO M w ill sta rt auto mat ically us ing t h e auto- run f eatu re as so on as th e dr i ve cl oses. NOT E U sing the lo w prof ile CD -RO M d r ive is sl ig htly dif fe rent t han f ull-hei ght u nits .
Chapter 10 Configurin g t he HP NetServ er 103 Running Co nfiguration A ssistant and Insta ll at i on A s sistant Insert t he HP N e tSer ver Navig a tor CD- ROM into t h e CD-R OM d ri ve . Turn the pow e r of f , w ait 10 se co n ds, and tur n t h e p ow er o n ag ai n.
Chapter 10 Configurin g t he HP NetServ er 104 Pe r fo r m a n auto mate d NOS i n st alla tio n fo r fi r st- time inst allat io n of Novel l N et Wa r e/In tr an etWar e or Micr oso ft Win dows NT Ser ver on a factor y-confi gu r ed Net Server .
Chapter 10 Configurin g t he HP NetServ er 105 • Co n figu re R emo te Manag eme n t: T his u tili ty co n fig ures t he I nteg rated Re mote Manage me n t de vic e fo r remo te manage me n t. I t e nab les remo te, dial-u p H P Ne tSe r ve r manageme n t.
Chapter 10 Configurin g t he HP NetServ er 106 Custom Configur at ion Only select Cust om on th e Configur ati o n Assi stan t menu if y ou a r e e xperi enced in Net Ser ver con fi g ur at i on an d ha ve a pr efer red seq u en ce of st ep s , or i f you pr efer to co n figu re y ou r sy ste m one c o mpo n ent at a time .
Chapter 10 Configurin g t he HP NetServ er 107 Replicate Confi g urati o n In R ep licate co nfigu ratio n mo de , y o u can s ave a co p y of yo ur cu rre n t s y stem co nfiguratio n or lo ad a p rev io usl y sav ed co n figurat io n. T h is me thod s ave s time w h en co nfigu ri ng mu ltip le , id e ntic al s y ste ms.
Chapter 10 Configurin g t he HP NetServ er 108 HP Manage ment So lutions H P Mana ge ment S o lutio ns is a c o mp r ehe n s iv e su ite o f utilitie s, a ppl ic atio ns, a nd b uilt-in f eatu r es to ma nage m ul tiple HP NetS erve rs lo cally or f rom r emo te lo catio n s.
Chapter 10 Configurin g t he HP NetServ er 109 • Easy li n kage w ith le ading ma nage me n t pl atfo r ms inc ludi n g H P O penVie w Netwo r k Node Manage r • Suppo r t fo r DMI 2 .
Chapter 10 Configurin g t he HP NetServ er 110 HP I n tegrated R emote A ssistan t Yo ur H P N etSe r ve r co mes w ith a b uilt in pro duc t ca lled the H P I nteg rated Remote Assi st an t (r eferr ed to as Integra t ed RA).
Chapter 10 Configurin g t he HP NetServ er 111 • SNMP Age nt s – SNMP age n t s enable in - ban d (across th e net work) ga th ering of inform at i on and al ert gener a ti on t o a n SNMP- based man ageme nt c lie nt.
Chapter 10 Configurin g t he HP NetServ er 112 Setup Utili t y T he H P N etS erve r has a S etup U tility (B IOS ) in re ad-o nly me mory . The util ity f eatures sev eral sy stem c onf iguratio n a n d h ous eke eping o pti o ns, inc ludi n g secur it y, an d syst em con sol e ch ar a ct er i s t i cs .
Chapter 10 Configurin g t he HP NetServ er 113 ◊ Em bedded LAN & SCSI Settin gs – U s e this me nu to se t the emb ed d e d NI C t o en abl e , d i sa bl e, or e n a bl e a s a boot d e vi c e (Boo t ROM En abl ed) .
Chapter 10 Configurin g t he HP NetServ er 114 • Pr ess th e ri gh t - a r r ow an d l eft - ar r ow ke ys t o m ove be t we e n sel ect i on s on t he me nu b ar. T he me n u b ar is p rese nt at t he to p o f the ma in se lec tions . • Press t he up-a rr ow an d do w n -arr ow keys to mo ve be t ween fields o n eac h scr een .
Chapter 10 Configurin g t he HP NetServ er 115 5. Typ e in th e secon d s an d p r ess Enter , t h e n use t he a rro w key s to leav e this fi el d . 6.
Chapter 10 Configurin g t he HP NetServ er 116 3. If n eces sa r y , u s e th e arr ow ke y to mov e t o th e Po we r - O n Password menu sel ect i on an d p r ess Enter . The Power -On Passwor d i s h ig h li gh t ed by de faul t when th e Securit y menu is s el ect ed .
Chapter 10 Configurin g t he HP NetServ er 117 NOT E To leav e the pop-up menu w ithout enteri n g a pass w ord, press th e Esc k ey at a n y time . 8.
Chapter 10 Configurin g t he HP NetServ er 118 17. T o use th e H ardware Se cu r it y menu u nder Sec urity , use the h elp f i l es pro v ided w ith t h e se lec tions. 18 . Sel ect t h e Esc k ey to e xit t h is me nu . 19. U se the rig ht-ar row key to go to t h e Ex it menu .
Chapter 10 Configurin g t he HP NetServ er 119 3. Press Enter to c hange the orde r a nd a lis t ap pe ars v ery simila r to the o ne bel ow: 1. [CD- ROM] 2.
Chapter 10 Configurin g t he HP NetServ er 120 ◊ If m or e th an ei gh t l ogi cal dri ves ar e conn ect ed t o th e HP Net Ser ver, drive s 9 a n d ab ove (in cluding th e DAC or SCSI b oards a nd the d rive s co nn ec ted to eac h) w ill n ot b e reco gnized by the S etup U tili ty .
Chapter 10 Configurin g t he HP NetServ er 121 S had ed re ct a ng le re prese nt s the pos it ion of sli d e switc h. 2 P ro ces so r Spe e d ( Bit 1) 3 P ro ces so r Spe e d ( Bit 2) 4 P ro ces so r.
Chapter 10 Configurin g t he HP NetServ er 122 3. Use t h e arr ow k e ys to m o ve t h e cur sor , pr es s [ Enter ] to se lec t an op tio n, an d pr ess [ Esc ] to e xit . 4. T o c h ange a dapte r sett ings: ◊ Se lec t an adap ter f r om the list i n t he m ai n me nu.
Chapter 10 Configurin g t he HP NetServ er 123 Gu ide To Co n figu re Se rve r – T his me nu se lec tio n p r ov ide s three sub m enus. ◊ NOS Inst al l atio n I n struc tio n s - T his s ubme nu s ele ctio n pro v ides y ou with th e necessar y instru ct i ons t o i n sta l l th e NOS y ou have selected for this i nstal latio n.
Chapter 10 Configurin g t he HP NetServ er 124 H P Se r ver M anag e men t So lut ions – T h is me nu se lec tion p rov ide s y o u w ith a co mp r ehe n siv e su ite o f uti litie s, ap p lica tio n s , a nd b uilt- i n f eatu r es to man age multip le H P N etSe r ve r s lo cally o r fro m re mo te lo catio n s.
Chapter 10 Configurin g t he HP NetServ er 125 8. Sc r oll to "W hat ’ s N ew o n the CD" in the mai n me nu a n d r ead it c are fully befo r e b eginning y our installatio n. Yo u may also use the tw o ic ons to "S av e to Diske tte" o r "P rint" the in for m at i on on scr een.
.
127 11 Informat ion A ssistant Overview Th e HP NetServer On li ne Docume ntati o n CD-ROM in cl u d es In for ma t i on Assist an t, which con ta in s the e nt ir e set o f documen ta tion for your Net Ser ver .
Chapt er 11 Infor mat ion As sis tan t 128 Sea rch fo r a wo rd o r ph rase u sin g Sear ch . Sear ch p er for m s f ull-tex t se arc h es f o r top ic te xt. I t not o nly take s y o u to t h e to pic found, b ut highlig ht s t he wo r d or w ords fo un d by th e s earch.
Chapt er 11 Infor mat ion As sis tan t 129 Copy in g and Pr in ting I nfor mati on Yo u c an c opy to pic text i n Inf orm atio n Assistant for u se in other appli cati on s, su ch as wor d pr oces s or s , by c op yi n g t e x t on t o th e Wi n d ows C l ip boa r d an d pa stin g t he te xt into any W indo w s appl icatio n.
.
131 12 T roubleshoo ting Tr oubleshoot ing Too ls If you ar e h avin g pr oblem s in sta ll in g yo ur H P N et Ser ver, th ere ar e a n um ber of dif feren t to o ls av ailab le f o r tro ub lesho oting .
Chap ter 12 Tr oublesho oti ng 132 ◊ Event Lo g Report Ut ility: D ispl ay s all log ge d H P N etSe r ve r mana g em ent event s, Powe r - On Self Test ( POST) err or s and other s ystem ev en ts.
Chap ter 12 Tr oublesho oti ng 133 3. Pl u g a di ffer en t el ectr ical devi ce ( s u ch as a pr in t er ) in t o th e power out l et , and tu rn it o n to c h eck if the fault is wit h the po wer supply . 4. Unplug the po we r cord, w a it 20 se conds, plug th e pow er co r d i n ag ain, a n d r estart th e system.
Chap ter 12 Tr oublesho oti ng 134 4. R emove all t hird-p arty o ptio ns, a n d r ei n st al l o ne a t a time , c h ec ki n g t h e sy ste m afte r eac h i n st alla tion . 5. R eplac e all c ov ers, a nd r ec on nec t the po we r co r d a nd o ther cab le s.
Chap ter 12 Tr oublesho oti ng 135 The f ollow ing tab le d es crib es co mmo n e rr ors and the c or rec tive ac tio n y ou may take to reme dy the pro ble m: Table 12-1.
Chap ter 12 Tr oublesho oti ng 136 2. T he po w er ou tlet is w o rking . 3. Th e Net Ser ver an d mon it or ar e t urn ed on. (T h e p ower - on in d i c a t or sh ou l d be i ll u mi n at ed . ) 4. Th e d i spl a y’ s con tr ast an d bri ghtn ess set t in g s ar e cor r ect.
Chap ter 12 Tr oublesho oti ng 137 ◊ Veri fy al l DIMMs a r e HP-supplied and are seated p r operly . Th e boo t scr een pr ovides in form ati on on the in stall ed DI MMs.
Chap ter 12 Tr oublesho oti ng 138 To c lear the system c onfiguration o n th e Sy stem B oar d: 1. T urn o ff power to the HP NetServe r, and u nplug t h e po wer cord. 2. Remove th e f r ont b ezel a nd lef t side co ver (or top c ov er). Refe r t o F i gures 12-1 , 12-2, and t he Tec hni cal R eferen ce L a bel.
Chap ter 12 Tr oublesho oti ng 139 Hardware Problems T his s ec tion de sc rib es w hat to do if y ou hav e p r ob lems with y our dis play , m ass st or ag e d e vi ces , pr int e r , a cces s or y boa r ds , ke yboa r d, or m ou s e.
Chap ter 12 Tr oublesho oti ng 140 6. If th e key bo ard lo ck L ED is il lum inate d, ty pe th e passw o r d to d is able vi d e o bl an kin g. 7. If a vi d eo b oa r d is in sta ll ed in an acces s or y slot, con tact th e man ufa ct ur er of the v ideo board.
Chap ter 12 Tr oublesho oti ng 141 Hard Disk Driv es Do N o t Work If e rr or mess a ges disp lay ed o n the mo ni t or i ndicate a h ard disk f ailure, pe rform th ese ch ecks: 1.
Chap ter 12 Tr oublesho oti ng 142 8. Plu g in t h e po w er c ord, tu rn o n po w er to t h e H P N etS erv er, and allo w it to co mple te its s ta rtup rout ine . 9. If yo u wish t o set the passwor d again, durin g th e powe r - on system har d war e test press th e F2 fu n ctio n ke y to start t he S etu p Utili ty .
Chap ter 12 Tr oublesho oti ng 143 12 3 4 5 6 Batter y Co nfi gur a t io n S wi t c h Figur e 12 -2. Battery on Sy st em Board 4. Inse rt t h e new b atte ry with t he po sitiv e si g n (+) f ac ing o ut , an d ensu r e it is se ated c omple tely . 5.
.
145 13 A l ternat iv e Rack M ounting Introduct ion T his c hapte r p r ov ide s the i nstruc tio n s f o r mou nting t he H P Ne tSe rve r i n a n H P Sy stems r a ck. Figure 13-1 show s th e Sy stems rack. If y ou have the newe r HP Sy ste m/E or S y stem/U rack s, go to Chap te r 8.
Chapt er 13 Altern ativ e Ra ck M ount ing 146 Th e HP Net S er ver LC 20 0 0r r a ck moun t k it r eq uir es fi ve E I A un it s of spa ce in th e rac k. Be fo re mo unti ng t h e N etS e rve r , pl an f o r t h e Ne tSe rve r’ s lo c atio n in t h e rack rel ative to o ther rack co mpo n ents .
Chapt er 13 Altern ativ e Ra ck M ount ing 147 Safety Pr ecauti ons Alw ay s kee p the f o llow ing s af ety an d e nviro nme ntal is sue s in mi nd, esp ec ially if you in stal l th e HP NetSer ver i.
Chapt er 13 Altern ativ e Ra ck M ount ing 148 Preparing the Rack Th e col u mn a da p t er s an d th e s l i d e mech an ism mu st be con n ected t o th e r ack befo r e installi n g the H P NetSe r ver LC 2000r into the ra ck. A c ardbo ar d rac k-mo u n ting templ ate c ome s w ith t h e H P N e tSe r ve r .
Chapt er 13 Altern ativ e Ra ck M ount ing 149 1. Find the ra ck-mounting template f o r t h e H P S y stems rack. If th e H P Ne tSe rve r is s till in its b ox, t h e templ ate s h ou ld be in t h e acces s or ies tr ay sit tin g on top of t h e NetSer ver it sel f.
Chapt er 13 Altern ativ e Ra ck M ount ing 150 A ttaching the Sli d es to the Rac k T his s ec tion p rov ide s t h e i n s t ructio ns f o r co nnec ti ng t h e mo unti ng s lide s to the ra ck .
Chapt er 13 Altern ativ e Ra ck M ount ing 151 6. If yo u do n ’ t ha ve the templa te, use the ma r ki n gs s h ow n in Figu r e 13-4 to determi ne w hich hole o n the co lumn the sli de mo unt s t hr ough. Right Rear Studs on slides will mo unt th rou gh this face of col umn s.
Chapt er 13 Altern ativ e Ra ck M ount ing 152 c. In se r t th e sl i d e’ s t wo th r eaded s t u d s int o th e mar k ed h ol es on th e sides of the lef t -front and l eft-rear r ack c olumns. Se e Figu r es 13-4 and 13-5 . d. Ti gh te n t he nu ts o n bo t h sc re w s .
Chapt er 13 Altern ativ e Ra ck M ount ing 153 Pl acin g the HP NetServer in the Rack U se this to pic to pl ace the H P N etSe r ve r saf ely in t h e rac k. The fo llo w in g top ics provide instruct ion f or in stalli ng t h e Cab l e Manage ment A rm and B ezel.
Chapt er 13 Altern ativ e Ra ck M ount ing 154 T he sli de s c lick into po sitio n w he n loc ked . T his lo ck ed po sitio n pre v ents t he slid es f ro m mo ving b ack into the rack , un less the r ele ase la tches a r e pressed as sh ow n i n Figure 1 3-9.
Chapt er 13 Altern ativ e Ra ck M ount ing 155 T he mo unt ing tab s i n t h e sl ides sho uld b e i n po sitio n to fit into the ope n ings i n chass i s. See Fig ures 13-6 and 1 3-7. 8. Lo we r the NetS erve r o n to t h e s lide me mbe r s. The Ne tServe r ’ s h andles w i ll tempo r arily support the Ne t Se rver on t he slide s.
Chapt er 13 Altern ativ e Ra ck M ount ing 156 13 . Pr es s in th e r e lea s e l at ch es o n each sl i d e, an d pu sh th e Net Ser ver al l th e wa y back in to th e r ack .
Chapt er 13 Altern ativ e Ra ck M ount ing 157 A ttachin g the Ca ble Man agemen t A rm Us e t h i s pr oced u r e to m oun t th e Ca bl e M a n a g e m en t Ar m on t h e H P N e t S er ver LC 2000 r whe n mounted i n the H P Sy stem racks.
Chapt er 13 Altern ativ e Ra ck M ount ing 158 Th e ca p ti ve n uts are l oca t ed n ear th e ex t ern al S C SI C onn ector ( kn ock out ) lo catio n . C able M anag eme nt A rm Rear of H P NetSe rver Lef t Rear Rack C olu mn Fig ure 13 -11 . A ttac hing the Cab le Manag eme n t Ar m 5.
Chapt er 13 Altern ativ e Ra ck M ount ing 159 10. P lug the N etSe r ve r ’ s po w er cab le a nd al l av ailab le da ta c able s into t h e b ack of th e Ne tSe rve r . A ttachin g the Fr on t Beze l T he f r ont b eze l att ac h es to the H P N e tSe r ve r by a h inge on the le f t and a catc h o n th e r ight.
Chapt er 13 Altern ativ e Ra ck M ount ing 160 2. Pr ess do wn on t h e blue Bezel R elease tab s how n in Figure 13-12. Fig ure 13 -13 . A ttac hing the Bez el t o th e N etS e rver 3. Pre ss the b eze l onto the fro nt o f the H P Ne tServ er a n d r ele ase the Blu e Tab to e ngage t h e hinge pins.
161 A Specifications P ow er R e qu i r em ent s Table A-1 . HP N etServe r LC 200 0/2000r Inp ut Pow er Inpu t Voltage and F requency 100-240 VAC ± 10%; 50/ 60 Hz Max imu m inru sh curren t 8 AMPs p.
Appe ndi x A Specifi cat ions 162 Power Supply AC Vo ltage se lec tio n fo r this NetS e rve r is a uto matic ally d etermi n ed by th e pow er supply . Table A-3. Powe r Supply Requ i r ements (Single Un it) AC Input Power (5 0/6 0 Hz) 100 to 127 VAC, 5.
Appe ndi x A Specifi cat ions 163 Environmental Requ ir e m ents The sp ec ific ations liste d b elow can v ary if yo u i n stall a m ass s to r age dev ice in y our H P Ne tSe r ve r that has more s trin ge nt e n vi r on me nta l lim its . E n su r e the o peratin g e nvi r on me nt is s uitab le f or all mass sto rage dev ice s in us e.
Appe ndi x A Specifi cat ions 164 Ph y sical Requirements Table A-6. LC 2000r Weight and D im ensions Heig ht 216 mm (8.5 in ) Width 445 mm (17.5 i n) Depth 675 mm (26 . 5 in) Weigh t 36 kg (80 lb ) Weig h t exclu d es m on it or an d keyboar d Table A-7.
Appe ndi x A Specifi cat ions 165 Vi deo Sup port Table A-10. Video Dr i ver Suppor t Netwo r k Operating Syste m (NO S) HP NetS erv er Support ed Co mm ent s Window s NT 3.51 No No Support planned Win dows NT 4.0 Yes Pr ovided with NOS Ne tWare 5 No No Driv er is avail able SCO Open Server 5.
.
167 B Regulatory Information Regulatory Notices - El ectromagnet ic Compliance Elec tro mag n et ic Co mpatib ility ( EMC) requ ireme nts have be en es tablis hed i n many co un tri es to r egulate th e radio freque n cy ener gy gen er at ed b y In fo rm a tion Technolo g y E qui pment (ITE).
Appe ndix B Regulat or y Infor m atio n 168 • Reor i en t or r el oca t e th e r ecei vin g ant enn a. • In c r ease th e separ ati on bet w een th e eq ui p m ent an d th e r ecei ver . • Conn ect th e equip m ent in t o an out l et on a cir cuit di ff er ent from th a t t o whi ch th e r ecei ver is conn ect ed .
Appe ndix B Regulat or y Infor m atio n 169 Noti ce f o r Japan T he c o n figu ratio n of the NetS erve r y ou have pu rchas ed may be in ei ther t h e class A or class B cat egor y.
Appe ndix B Regulat or y Infor m atio n 170 Noti ce f o r Korea T he c o n figu ratio n of the NetS erve r y ou have pu rchas ed may be in ei ther t h e class A or class B cat egor y.
Appe ndix B Regulat or y Infor m atio n 171 Notice f o r Taiwan Class A Warning Stat ement Noti ce f o r Eur o pea n Union Fo r Class A Pr odu cts WARNI N G C lass A P rod ucts : I n a dome stic e nvi r onme nt t his p rodu ct may cau se r a d i o in t er fer en ce in wh i ch ca se th e user may be requ ire d to take ade qua te me asu res.
Appe ndix B Regulat or y Infor m atio n 172 Declarat ion of C onformity (US, EU , Au stralia) DECLARATION OF CONFORMITY ac co r din g t o ISO / IEC Guide 22 and E N 45014 Man u f actu rer’ s/Supplie.
Appe ndix B Regulat or y Infor m atio n 173 Regulatory Notices - Pr oduct Safet y The f ollow ing i n fo r matio n ap p lies on ly to se r ve r s w ith fac tory -insta lled comp on en t s. CD-RO M and L aser S afety Statem ents The f ollow ing i n fo r matio n ap p lies on ly to se r ve r s w ith fac tory -instal led driv es .
Appe ndix B Regulat or y Infor m atio n 174 LA SER Safety - Finlan d LASERTURVALLIS UUS LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT H P NetServer LC 2000/LC 2000 r - ver k k op a l vel im een voida an asen taa lisäv arustee na l aitte ensis ainen CD-R OM-lukul aite , jo ka on l aserla ite.
Appe ndix B Regulat or y Infor m atio n 175 CLASS 1 LASER PRODUCT T his C D-R OM D riv e U nit is c las sif ie d as a CLASS 1 LASER PRODUCT. LASSER KLASSE 1 PRODUKT The C LASS 1 LASER PRODU C T l a bel is locat ed on t h e top of t h e dr i ve. Be i diesem CD-R OM-Laufwe r k CDU 56S handelt es s ich um ei n Lase r -Produkt der Kl a sse 1.
Appe ndix B Regulat or y Infor m atio n 176 Noise and Er gon omic Saf ety S tatemen ts Noi se Declaration and Ergonomics - G ermany So un d Pressure: L pA < 5 5 dB (A) am A r be itspla tz, B e ob achte r Po sitio n (w orkpl ace , by stande r p o sitio n) norm ale r Be trieb (no r mal ope r atio n) nach DIN 45635 T .
177 C Service and Suppor t Fo r all Se r vic e a n d S uppo rt i n fo r matio n, se e th e H P N etSer ver W arr anty and Service/Sup por t Bookl et i ncluded w ith y our product.
.
179 D Warrant y and Soft w are License Warranty See t h e HP NetServ er War ranty an d Servic e/Support B ooklet i n clude d with y our product f o r all w arranty a nd se r vice / support info r m atio n. HP S oftware Product Lice nse A greement ATTENTION: USE O F TH E SOFTWA RE IS SUBJECT TO THE HP SOFTWARE L ICENSE TERMS SET FORTH B ELOW.
Appe ndix D Warra nty a nd S oft war e Lic en ses 180 If your Computer wa s shi ppe d with a R ec overy CD, (i) t h e Re covery CD and/o r Suppo rt U tility sof t ware m ay be use d only for resto r i.
181 Index A acces s or i es tr oubl e s h o ot i n g, 1 3 6 acces s or y boar d s in st al la ti on , 61 aco us tic e miss io n s, 1 63 Admini stra t or Pa ssword se tting, 1 1 7 an ti - t i p foot ra.
Index 182 cove rs remov in g, 22, 28 cust om co n figurati o n , 106 D DAC, 132 DAT tap e drive error c o des, 13 Diag To o ls, 111 suppo r t ticket, 1 11 DIMM in sta llat i on 90 ° angl e t o sy st .
Index 183 Hot Swap ma ss stor age cag e, 34 Hot Swap SCSI dr i ves ha rd w are m ir ro ri ng , 35 H W mirr o ring requ i rements, 35 RA ID level 1, 35 sof t w ar e mi rro ri ng li mitat ions, 35 HP In.
Index 184 lo ck mo de ke yboa r d d i s a ble d , 1 0 ke yboa r d l oc k , 10 Networ k Ser ver mode, 10 pow er button disab led, 10 vi d e o bl an kin g di sa bl ed, 10 M ma ss st ora g e, 34 ma ss st.
Index 185 regu lato r y in fo rmatio n, 16 7 R egulato ry Notice s - Ele ct roma gnetic Com p l ian ce, 1 6 7 R egulato ry Notice s - P rod uc t S afe t y , 173 re mo v ing pr ocessor ca g e cover , 7.
Index 186 fi n d in g th e pr obl e m , 13 3 ha r d war e pr oble m s , 1 3 9 no e rr or mess a ges, 135 pa sswor d pr oblems, 141 precautio ns, 131 t ool s, 1 3 1 U U n inte rruptib le P ow er Supp l.
Een belangrijk punt na aankoop van elk apparaat HP LC 2000R (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen HP LC 2000R heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens HP LC 2000R vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding HP LC 2000R leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over HP LC 2000R krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van HP LC 2000R bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de HP LC 2000R kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met HP LC 2000R . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
