Gebruiksaanwijzing /service van het product 211954E van de fabrikant Huffy
Ga naar pagina of 22
1 01/04 P/N 211954E © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211954E 01/04 BEFORE YOU ST ART! T o ensure optimal playability of backboard system, a close tolerance fit between the elevator component s and hardware is required. T est-fit large bolt s into large holes of elevator tubes, backboard bracket s, and triangle plates.
01/04 P/N 211954E 3 W ARNING F AILURE T O FOLLOW THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • DO NO T HANG on the rim or any part of the system including bac kboard, support braces or net.
4 P/N 211954E 01/04 For more information on assembly, placement, proper use, and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are packed inside.
01/04 P/N 211954E 5 2 2 1 3 TO ADJUST BACKBOARD: 1. While holding handle, remove pin. 2. Move elevator up or down to desired height. 3. Replace pin full length to lock system at desired height. 201252 2/99 1 2 4 3 MOVING SYSTEM 1. Adjust basketball backboard height to lowest position.
6 P/N 211954E 01/04 Get to know the basic parts of your basketball system..... SUPPOR T STRUT BACKBOARD FRONT RIM BASE POLE WHEELS ELEV A TOR SYSTEM.
01/04 P/N 211954E 7 P ARTS LIST - See Hardware Identifier Item Qty. Part No. Description 1 1 206336 Tank 2 2 206330 Wheel Axle, 4-1/4 Long 3 2 226401 Wheel, 4“ (Black) 4 1 904847 Top Pole Section 5 1 908024 Middle Pole Section 6 1 908487 Bottom Pole Section 7 1 202820 Rod, 3/8 O.
8 P/N 211954E 01/04 * You may have extra parts with this model. Item #14 (1) Item #18 (2) Item #21 (4) Item #22 (2) Item #25 (1) Item #30 (2) Item #31 (1) Item #38 (4) Item #35 (4) Item #48 (1) Item #.
01/04 P/N 211954E 9 Insert axle rod (2) through wheel (3), as shown. Secure wheel assembly to tank (1) by t apping wheel downward with hammer , snapping it into position. Repeat for opposite side, then carefully , turn t ank (1) over . Remove all contents from underside of tank.
10 P/N 211954E 01/04 IMPORT ANT! Center alignment slot of lower pole section (6) in a lower hole of middle pole section (5) as in step 3. While maintaining alignment, bounce top & middle pole assembly (4 & 5) onto lower pole section (6) as shown until top & middle pole assembly no longer moves toward taped reference mark on bottom pole.
01/04 P/N 211954E 11 Insert pole assembly into tank assembly as shown. Install rod (7) through holes in bottom pole section (6) and eyebolt (8). DO NOT OVER TIGHTEN IMPORT ANT!: DO NOT OVER TIGHTEN IMPORT ANT!: TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
12 P/N 211954E 01/04 1 11 15 16 11 1 13 13 11 12 13 6 14 13 4 16 37 18 18 16 17 Secure strut tubes (1 1) to bottom pole section (6) as shown. Carefully place unit in the side position and secure strut (1 1) to t ank (1) as shown. Completely tighten. Repeat for opposite side.
01/04 P/N 211954E 13 19 21 21 19 19 20 20 19 17 22 22 23 23 Attach sp acers (22, 23) to pole mount bracket (17) with bolt s (21), washers (19), and nuts (20) as shown. Tighten just until washers (19) stop moving. IMPORT ANT!: 17 16 26 24 24 27 25 FIG .
14 P/N 211954E 01/04 30 29 16 28 28 Apply logo and height indicator labels (29) to adjustment rod (28) as shown. Attach handle part s (32, 33) to adjustment rod with screw (31), carriage bolt (30), and flange nut (16) as shown. Insert handle assembly through pole mount assembly as shown.
01/04 P/N 211954E 15 36 36 21 21 20 20 34 Attach backboard support bracket s (34) to the backboard frame using bolt s (21), spacers (36), and nut s (20) as shown.
16 P/N 211954E 01/04 47 42 40 41 40 55 57 57 34 39 Attach rim to board as shown. For spring loaded rim assembly , refer to instructions included with rim hardware. Assemble lower elevator tubes (40) as shown. DO NOT overtighten. IMPORT ANT!: Refer to instructions included with board and rim hardware for backboard and rim assembly .
01/04 P/N 211954E 17 Assemble upper elevator tubes (43) to backboard brackets (34). DO NOT overtighten. SAWHORSE OR SUPPORT TABLE Support pole on sawhorse. Attach backboard assembly to top pole section (4) as shown. Install pole cap (46). USE CAUTION; ELEVATOR ASSEMBLY IS HEAVY.
18 P/N 211954E 01/04 47 39 44 44 28 Install upper elevator tubes (43) to triangle plates (45) as shown. Then, install handle assembly to lower elevator tubes (40) using bolt (47), spacers (44), and nut (39) as shown. Before going on to next step, set adjustable system assembly to the 10’ (3.
01/04 P/N 211954E 19 41 39 47 43 43 53 49 52 Insert bolt (47) through left side upper elevator tube (43), then stretch spring (41) onto bolt (47). Insert bolt (47) through right side upper elevator tube (43) and secure with nut (39) . Roll completed assembly to desired position.
20 P/N 211954E 01/04 26 9. 10. 11 . 54 10 f t. (3.05 m) While holding handle, remove pin (26). Move elevator up or down to desired height. Replace pin (26) full length to lock system at desired height. Apply height and transport label (54) to front of pole as shown.
01/04 P/N 211954E 21 CLIP “ARM” CLIP “BODY” A A B B C C 50 Install net clips. Installez les pinces du filet. Netzhalteklammern anbringen. Instale los sujetadores de la red.
22 P/N 211954E 01/04 NET INST ALLA TION Install net. Installez le filet. Das Netz anbringen Instale la red. Insert net into bottom of clip as shown. Insérez le filet dans la base de la pince, comme illustré. Das Netz wie gezeigt unten in den Clip stecken.
Een belangrijk punt na aankoop van elk apparaat Huffy 211954E (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Huffy 211954E heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Huffy 211954E vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Huffy 211954E leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Huffy 211954E krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Huffy 211954E bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Huffy 211954E kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Huffy 211954E . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
