Gebruiksaanwijzing /service van het product M732201 van de fabrikant Huffy
Ga naar pagina of 21
1 01/06 ID# M732201 Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-632 7921 Internet Address: http://www.
2 ID# M732201 01/06 Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
01/06 ID# M732201 3 522730 06/05 MOVING SYSTEM HEIGHT ADJUSTMENT TO RESET OR REPOSITION BACKBOARD: 1. Grasp handle firmly and pull down to raise rim P AST highest position (above 10 feet). 2. While still holding handle firmly , CAREFULL Y lower rim to lowest position.
4 ID# M732201 01/06 IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside. NOTICE T O ASSEMBLERS Adult Assembly Required. Dispose of ALL packaging materials promptly . As with all products, periodically inspect for loose small part s.
01/06 ID# M732201 5 Get to know the basic parts of your basketball system... RIM POLE BASE SUPPORT STRUT BACKBOARD FRONT VIEW BACKBOARD RIM POLE ELEVATOR ADJUSTMENT BASE SUPPORT STRUT BACK VIEW.
6 ID# M732201 01/06 P ARTS LIST - See Hardware Identifier NOTE: Hardware kit is designed for more than one style of basketball system. Not all hardware will be used.
01/06 ID# M732201 7 * You may have extra parts with this model. HARDW ARE IDENTIFIER (BOL TS & PINS) Item #12 (6) Item #13 (1) Item #15 (6) Item #14 (4) Item #9 (1) Item #18 (2) Item #38 (7) Item .
8 ID# M732201 01/06 Item #32 (1) Item #31 (1) HARDW ARE IDENTIFIER (STEEL SP ACERS & RODS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS & CLIPS) HARDW ARE IDENTIFIER (OTHER) Item #44 (1*) Item #7 (1.
01/06 ID# M732201 9 ITEMS REQUIRED FOR THIS SECTION This is what your system will look like when you’ve finished this section. (2) 1/2” and (2) 9/16" Wrenches 9/16” 1/2” (2) Socket Wrenches and Socket s SECTION A: ASSEMBLE THE BASE 1. Correctly identify each pole section and mark indicated distance from ends with tape as shown.
10 ID# M732201 01/06 2. WOOD SCRAP (NOT SUPPLIED) 5 4 While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.
01/06 ID# M732201 11 4 5 6 WOOD SCRAP (NOT SUPPLIED) RODS SHOWN ARE FOR VISUAL REPRESENTATION OF ALIGNMENT AND ARE NOT SUPPLIED WITH THE HARDWARE Align dimple of middle pole section (5) into trough of bottom pole section (6) as shown.
12 ID# M732201 01/06 4. 5. Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel axle (2) with sp acers (17) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown.
01/06 ID# M732201 13 11 12 12 10 6 6 10 1 13 6. Secure base struts (10) to pole using bolt (1 1), washers (12), and nut (13), as shown. Rotate the non-secured ends of base strut s (10) as shown. 7. Secure both base struts (10) to base using bolts (15), washers (12), and nuts (16).
14 ID# M732201 01/06 This is what your system will look like when you’ve finished this section. (2) 1/2”, (2) 9/16” and (2) 3/4” Wrenches 9/16” 1/2” 3/4” (2) Socket Wrenches and Socket s ITEMS REQUIRED FOR THIS SECTION SECTION B: A TT ACH THE BACKBOARD Assemble backboard brackets (29) using bolt s (14) and nuts (9) as shown.
01/06 ID# M732201 15 Fit spacer (44) into p awl (27). Then secure to brackets (29) using bolt (35) and nut (52) as shown. 3. 9 35 27 44 42 43 28 42 41 41 27 38 38 29 23 43 4. DO NOT OVER TIGHTEN! It is necessary for all parts to be installed properly for this mechanism to work safely and properly.
16 ID# M732201 01/06 5 . Secure pawl (27) in place with clevis pin (34) and washers (18) as shown. 6 . S tretch spring (40) into position with pliers from clevis pin (34) to board bracket (29). USE EYE PROTECTION WHEN INSTALLING SPRINGS. W ARNING! 43 36 16 32 29 7.
01/06 ID# M732201 17 38 43 43 42 42 38 22 4 42 41 41 38 43 43 8. 9. Attach upper elevator tubes (43) to backboard bracket s (29) using spacers (41) bolt (42) and nut (38) as shown. Support pole on sawhorse. Attach upper and lower elevator tubes (43) to upper pole section (4) using bolts (42) and nut s (38) as shown.
18 ID# M732201 01/06 42 33 33 47 38 42 33 47 38 10. Attach outer handle tube (47) to upper elevator tubes (43) using bolt (42) sp acers (33) and nut (38) as shown. Attach outer handle tube (47) to lower elevator tubes (43) using bolt (42) sp acers (33) and nut (38) as shown.
01/06 ID# M732201 19 47 48 48 46 11 . Slide inner handle tube (48) into outer handle tube (47) as shown. 12. Secure inner handle tube (48) to outer handle tube (47) using screws (20) as shown.
20 ID# M732201 01/06 13. Inst all Rim to Backboard A. Fit rim (21) securely into bracket (32) as shown. Allow T -bolt (36) to slip through center hole in rim (21). B. Install reinforcement bracket (31) onto T -bolt (36) as shown. C. Install spring (30) onto T -bolt (36) as shown.
01/06 ID# M732201 21 14. Roll the completed assembly to the desired playing area. Fill tank with 33 gallons of water . 15. Apply the height adjustment and moving label (25) to the front of the pole as shown. 24 24 10 ft. (3.05 m) 25 TWO CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE.
Een belangrijk punt na aankoop van elk apparaat Huffy M732201 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Huffy M732201 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Huffy M732201 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Huffy M732201 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Huffy M732201 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Huffy M732201 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Huffy M732201 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Huffy M732201 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
