Gebruiksaanwijzing /service van het product 225 HBV van de fabrikant Husqvarna
Ga naar pagina of 32
225 HBV E P A V ersion Operator´s manual Read the operato r ’ s manual carefully and make sure that you understand the contents before using the blowe r .
Svenska – 31 Sve-5 225/232/235 Bruk 97-11-25, 08.46 31.
English – 1 CONTENTS Introduction ......................................... 2 Key to symbols .................................... 3 Safety instructions .............................. 4 Description ........................................... 6 Fuel handling .
2 – English INTRODUCTION ! WARNING! Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorised modifications and/or accessories can result in serious personal injury or the death of the operator or others.
English – 3 KEY T O SYMBOLS Symbol Description Location Operator ’s manual Blower Symbol Description Location Blower The blower operator must make sure that no bystanders or animals come nearer than 10 metres.
4 – English Personal safety equipment Fuel safety ! Special safety instructions apply to the type of fuel used for the blower . These instructions are specified under ”Fuel handling” on pages 1 1 and 12. The following instructions apply to persons operating the blower: 1.
English – 5 1. Do not allow bystanders or animals to be in the work area, i.e. 10 metres from the operator. 2. The blower may throw objects at high velocity that can ricochet and hit the operator. This may cause serious eye damage. 3. Never point the blower nozzle toward people or animals.
6 – English DESCRIPTION The blower 1. Shoulder strap 2. Throttle trigger 3. Stop switch 4. Throttle lock 5. Shoulder strap ring 6. Anti-vibration system (inside the housing) 7. Fan housing 8. Fuel cap 9. Air filter 10. Choke 1 1. Inspection cover 12.
English – 7 DESCRIPTION Accessories 21. V acuum device with collection components consisting of items 22 - 25 below . 22. V acuum bag tube. 23. Collection bag.
8 – English DESCRIPTION 34 2 ! The muffler is designed to give the lowest possible noise level and to direct the engine‘s exhaust fumes away from the operator . Muffler fitted with catalytic converter is also designed to reduce harmful exhaust components.
English – 9 DESCRIPTION 24 15 14 7 13 12 1 1 Throttle trigger (2) The speed and the output of the engine are regul- ated by the throttle trigger . The throttle lock (4) must be pressed down before the trigger will actuate the throttle. Fan casing (7) The blower fan casing (7) together with the impeller (13) provide high performance air discharge.
10 – English DESCRIPTION 17 18 8 9 19 10 Starter device (18) and starter handle (17) The starter device is located at the top on the engine shrouding and engages in the crank shaft only when the starter handle is pulled.
English – 11 Fuel mixture WARNING! Allow adequate ventilation while handling fuel. NOTE! The machine is fitted with a two-stroke engine and must always be run on a mixture of gasoline and two- stroke oil. It is important to measure the quantity of oil accurately , to ensure the correct mixture ratio.
12 – English Olja • Olje Olie • Öljyä Lit. 5 10 15 20 2%(1:50) 0,10 0,20 0,30 0,40 Bensin Bensin Benzin Bensiiniä Lit. O FUEL HANDLING Mixture • Always mix gasoline and oil in a clean container intended for fuel. • Always start by filling half the quantity of gasoline required.
English – 13 ST ARTING AND STOPPING WARNING! Never start the blower if the inspection cover is not closed, is damaged or cannot be closed. (Exception: When the vacuum tube is fitted). ! A cold engine should be started in the following manner: 1. Move the stop switch to the start position.
14 – English USING THE BLOWER WARNING! When fitting the blower tube and nozzle, the engine must be switched off and the stop switch must be in the stop position. ! The blower tube and nozzle have a bayonet mount. Fit them in the following manner: 1.
English – 15 USING THE BLOWER ! WARNING! Never start the blower if the inspection cover is not closed, is damaged or cannot be closed. (Exception: When the vacuum tube is fitted). ! 21 14 WARNING! Do not operate the blower while standing on a ladder or a stand.
16 – English USING THE BLOWER 1. Open the collection bag. Insert the collection bag tube from inside the bag to fit in the vacuum inlet opening of the bag as illustrated in the adjacent figure. Close the zipper on the bag. 2. Press the collection bag tube on the blower, turn it 1/4 of a turn until a snap is heard.
English – 17 USING THE BLOWER ! WARNING! Do not operate the blower while standing on a ladder or a stand. When operating the blower , the blower and collection bag must be secured in the shoulder strap. The strap should be worn over the shoulder as shown in the adjacent figure.
18 – English MAINTENANCE The fuel quantity required in relation to the air flow , provided by the opening in the throttle, is adjusted by the L and H jets. If they are screwed clockwise, the air/fuel mixture becomes leaner (less fuel) and if they are screwed counterclockwise, the mixture becomes richer (more fuel).
English – 19 MAINTENANCE Muffler NOTE! Some mufflers are fitted with a catalytic converter . See “T echnical data” to see whether you clearing saw is fitted with a catalytic converter . The muffler is designed to dampen the noise level and to direct the exhaust fumes away from the user .
20 – English The air filter (A) must be cleaned regularly to remove dust and dirt. This will prevent: • Carburetor malfunctions • Starting problems • Reduced performance • Unnecessary wear o.
English – 21 MAINTENANCE Starter device T o change a broken or worn cord 1. Unscrew the screws (A) to remove the starter device from the blower . 2. Pull out the cord approx. 30 cm (12”) and lift it up into the notch in the periphery of the pulley .
22 – English MAINTENANCE T o change the recoil spring 1. Dismantle the pulley according to items 1 to 5 in the instructions on the preceding page. WARNING! The recoil spring may pop out and cause injury. Wear protective goggles or a visor. ! 2. Carefully lift out the recoil spring.
English – 23 MAINTENANCE 1 2+3 4 5 8 1+3 4 5 6 7 8 2 Maintenance schedule A number of general maintenance instructions are given below . If more detailed instructions are required, get in touch with your local servicing dealer . Daily maintenance 1.
24 – English MAINTENANCE Monthly maintenance 1. Flush the fuel tank with clean gasoline, which afterward should be disposed of in an environ- mentally correct manner . 2. Clean the outside of the carburetor and the space around it. Replace damaged parts.
English – 25 TECHNICAL DA T A 25,4 34 28 3.000 8.200 7.400 0.9 kW/9000 rpm Ye s W albro MB/CD Champion RCJ 7Y 0.5 W albro/WT 0.4 5.1 92 102 2.6 4.2 Radial fan 57 (206) 425 665 560 Engine Cylinder volume, cm 3 : Cylinder bore, mm: Stroke, mm: Idling speed, rpm: Max.
EMISSION CONTROL W ARRANTY ST A TEMENT YOUR W ARRANTY RIGHTS AND OBLIGA TIONS The EPA (The US Environmental Protection Agency), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 1999 and later small nonroad engine.
Svenska – 31 Sve-5 225/232/235 Bruk 97-11-25, 08.46 31.
Svenska – 31 Sve-5 225/232/235 Bruk 97-11-25, 08.46 31.
Svenska – 31 Sve-5 225/232/235 Bruk 97-11-25, 08.46 31.
2000W01.
Een belangrijk punt na aankoop van elk apparaat Husqvarna 225 HBV (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Husqvarna 225 HBV heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Husqvarna 225 HBV vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Husqvarna 225 HBV leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Husqvarna 225 HBV krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Husqvarna 225 HBV bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Husqvarna 225 HBV kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Husqvarna 225 HBV . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
