Gebruiksaanwijzing /service van het product LTH140 van de fabrikant Husqvarna
Ga naar pagina of 51
L TH140 Owner’ s Manual.
2 Look for this symbol to point out impor- tant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED. SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS.
3 PRODUCT SPECIFICA TIONS HORSEPOWER: 14.0 GASOLINE CAPACITY 5 QUARTS AND TYPE: UNLEADED REGULAR OIL TYPE (API-SF/SG): SAE 10W30 (above 32 ° F) SAE 5W-30 (below 32 ° F) OIL CAPACITY: W/ FILTER: 4.0 PINTS W/O FILTER: 3.5 PINTS SPARK PLUG: CHAMPION RC12YC (GAP: .
4 T ABLE OF CONTENTS INDEX A Adjustments : Brake ........................................... 21 Carburetor ................................... 24 Clutch .......................................... 21 Mower: Front-To-Back ........................ 20 Side-To-Side .
5 CONTENTS OF HARD W ARE P A CK (2) Hex Bolts 1/4-20 x 3/4 (2) Washers 9/32 x 5/8 x 16 Gauge (2) Lock Washers 1/4 (2) Hex Nuts 1/4-20 Parts packed separately in carton Parts Bag contents shown.
6 ASSEMBL Y STEERING WHEEL ADAPTER FIG. 1 Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor, all parts and hardware you assemble must be tightened securely.
7 ASSEMBL Y INSTALL SEAT (See Fig. 3) Adjust seat before tightening adjustment knob. • Remove cardboard packing on seat pan. • Place seat on pan and assemble shoulder bolt. • Assemble adjustment knob and flat washer loosely. Do not tighten. • Tighten shoulder bolt securely.
8 ASSEMBL Y INSTALL BATTERY (See Figs. 4 and 5) CAUTION: Do not short battery termi- nals. Before installing battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to prevent sparking from acciden- tal grounding.
9 ASSEMBL Y ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 7) Assemble gauge wheels with tractor on a flat level surface. • Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).
10 OPERA TION KNO W Y OUR TRA CT OR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Our tractors conform to the safety standards of the American National Standards Institute. ATTACHMENT CLUTCH SWITCH : Used to engage the mower blades, or other attachments mounted to your tractor.
11 OPERA TION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recom- mend wide vision safety mask for over the spectacles or standard safety glasses.
12 OPERA TION TO OPERATE MOWER (See Fig. 11) Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the mower clutch engaged will shut off the engine. • Select desired height of cut.
13 OPERA TION CAUTION: Fill to bottom of gas tank filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. PURGE TRANSMISSION CAUTION: Never engage or disengage freewheel lever while the engine is run- ning.
14 CUST OMER RESPONSIBILITIES BEFORE EACH USE ✔ ✔ ✔ ✔ ✔ T R A C T 0 R Adjust Motion Drive Belt(s) Tension Inspect Muffler/Spark Arrester Lubrication Chart Check Brake Operation Clean Air Fil.
15 CUST OMER RESPONSIBILITIES TRACT OR Always observe safety rules when performing any mainte- nance. BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and Adjust- ments section of this manual).
16 CUST OMER RESPONSIBILITIES BATTERY (See Fig. 16) Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend it's life. • Acid solution level in each battery cell should be even with bottoms of vent wells.
17 CUST OMER RESPONSIBILITIES ENGINE LUBRICATION Only use high quality detergent oil rated with API service classification SF or SG. Select the oil's SAE viscosity grade according to your expected operating temperature.
18 CUST OMER RESPONSIBILITIES CLEAN AIR INTAKE/COOLING AREAS To insure proper cooling, make sure the grass screen, cooling fins, and other external surfaces of the engine are kept clean at all times. Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds.
19 SER VICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: • Depress clutch/brake pedal fully and set parking brake. • Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position.
20 SER VICE AND ADJUSTMENTS FRONT-TO-BACK ADJUSTMENT (See Figs. 23 and 24) IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO- SIDE.
21 SER VICE AND ADJUSTMENTS .012" ROTOR BRAKE PLATE SLOT (3) NYLON LOCKNUT (3) CLUTCH PLATE FIG. 26 TO ADJUST BRAKE (See Fig. 27) Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.
22 SER VICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT (See Fig. 28) Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. • Remove mower (See “TO REMOVE MOWER” in this section of this manual.
23 SER VICE AND ADJUSTMENTS NEGATIVE TERMINAL POSITIVE TERMINAL NEGATIVE TERMINAL POSITIVE TERMINAL CHARGED BATTERY CABLES CHASSIS TO ADJUST STEERING WHEEL ALIGNMENT If steering wheel crossbars are no.
SER VICE AND ADJUSTMENTS 24 TO REPLACE FUSE Replace with 30 amp automotive-type plug-in fuse. The fuse holder is located in the engine compartment, directly in front of the dash. TO REPLACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill.
25 SER VICE AND ADJUSTMENTS IDLE FUEL ADJUSTING NEEDLE IDLE SPEED ADJUSTING SCREW FIG. 34 TO ADJUST CARBURETOR (See Fig. 34) The carburetor has been preset at the factory and adjust- ment should not be necessary. However, minor adjust- ment may be required to compensate for differences in fuel, temperature, altitude or load.
26 ST ORA GE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark.
TROUBLESHOOTING POINTS 27 Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug.
TROUBLESHOOTING POINTS 28 PROBLEM CAUSE CORRECTION Engine continues to run 1. Faulty operator-safety presence control system. 1. Check wiring, switches and connections. If not when operator leaves seat corrected, contact an authorized service center/ with attachment clutch department.
29 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) SCHEMATIC HEADLIGHT SWITCH (OFF) HEADLIGHTS BATTERY G B S M L IGNITION SWITCH NON-REMOVABLE CONNECTIONS REMOVABLE CONNECTIONS .
30 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . 954001192A ELECTRICAL Comm. Harn. 140421 22 21 24 42 43 40 34 26 28 25 30 44 44 31 32 33 29 23 19 20 19 20 41 51 50 39 38 36 36 70 140426 2 3 4 1 5 6 9 7 8 BATTERY BOX WITH LID 45 D.
31 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . 954001192A ELECTRICAL 1 532121537 Battery 12 Volt 30 Amp 2 874760412 Bolt Hex Hd 1/4-20unc X 3/4 3 819091016 Washer 9/32 X 5/8 X 16 Ga 4 810040.
32 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO .954001192A CHASSIS AND ENCLOSURES 81 3 2 3 38 39 35 26 3 3 13 35 26 33 10 34 1 3 11 3 59 9 15 64 76 25 26 71 69 71 70 82 83 84 24 26 91 92 90 86.
33 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . 954001192A CHASSIS AND ENCLOSURES KEY PART NO. NO. DESCRIPTION KEY PART NO. NO. DESCRIPTION 1 532140341 Chassis 11 ga 2 532140356 Drawbar 3 817490612 Screw, Thd., Roll. 3/8-16 x 3/4 6 532125453 Saddle 8 532126471 Clip Insulator .
34 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) DRIVE 88 86 87 51 32 61 30 52 61 58 32 45 59 42 42 51 31 81 38 61 49 19 27 37 41 42 40 44 48 45 19 97 16 73 18 103 102 94 .
35 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) DRIVE KEY PART NO. NO. DESCRIPTION 1 532144436 Transaxle Assembly 2 532142431 Spring, Return, Brake 3 532143995 Pulley, Tr.
36 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) ENGINE 2 1 OPTIONAL EQUIPMENT Spark Arrester 29 24 23 44 31 33 37 33 40 73 75 74 76 32 77 4 80 79 79 3 14 38 15 16 62 6.
37 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) ENGINE 1 532132753 Control Th/ch 2 817720410 Screw Hex Thd Cut 1/4-20x5/8 T 3 - - - - - - - - Engine Kohl 14 HP Model No.
38 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) STEERING ASSEMBLY 5 9 5 7 7 9 4 33 35 34 33 3 34 35 32 43 6 43 8 17 18 19 22 21 20 8 27 23 11 12 24 29 25 5 8 10 12 11 11 .
39 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) STEERING ASSEMBLY 1 532124415 Wheel Steering 2 532142033 Axle Asm Fr LT W/gzks 38/42 3 532135227 Spindle Asm LH 4 53213522.
40 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (H954001192A) SEAT ASSEMBLY 1 24 16 15 12 13 17 25 4 3 8 9 7 8 9 7 18 11 2 6 22 21 5 10 5 14 KEY PART NO.
41 KEY PART NO. NO. DESCRIPTION 1 532138956 Decal Instruction Dash Eng/fr 2 532140863 Decal Ins Hood RH LTH140 Hydro 3 532140728 Decal Hood RH Husq 4 532140729 Decal Hood LH Husq 5 532121549 Decal Cau.
42 REP AIR P AR TS 1 4 HP 42" TRA CT OR - MODEL NO . L TH140 ( 954001192A) 42" MOWER 15 14 12 13 11 10 9 8 16 68 30 31 32 33 35 54 34 55 56 40 40 17 1 46 44 21 22 24 25 26 27 2 28 29 23 21 2.
43 REP AIR P AR TS 1 4 HP 42" TRA CT OR - MODEL NO . L TH140 ( 954001192A) 42" MOWER 1 532144393 Deck Asm MWR 42"weldment 2 872140506 Bolt Rdhd Sqnk 5/16-18unc X3/4 3 532138017 Bracket .
44 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) MOWER LIFT ASSEMBLY 15 20 16 17 18 20 20 15 20 4 5 6 2 3 1 6 5 4 7 8 10 21 22 23 24 25 26 27 28 29 30 37 41 35 36 40 38 12.
45 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) MOWER LIFT ASSEMBLY KEY PART NO. NO. DESCRIPTION 1 532136971 Wire Asm Inner W/plunger 17 32 2 532136968 Shaft Asm Lift 93 .
46 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) HYDRO-GEAR TRANSAXLE - MODEL NO. 310-0750.
47 REP AIR P AR TS 14 HP 42" TRA CT OR - MODEL NO . L TH140 (954001192A) HYDRO-GEAR TRANSAXLE - MODEL NO. 310-0750 KEY PART NO. NO. DESCRIPTION 1 532142930 Housing, Lower 2 532142931 Assembly, Up.
48 SER VICE NO TES.
49 SER VICE NO TES.
50 15° MAX. SIGHT AND HOLD THIS LEVEL WITH SKY LINE OR TREE. CUT OUT ON DOTTED LINES THIS IS A 15° SLOPE SIGHTING GUIDE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION Operate your Tractor up and down the face of slopes (not greater than 15°), never across the face.
51 Effective May 1, 1992 W ARRANTY ST A TEMENT (2) Failure to operate or maintain the unit in accordance with the Owner’s/Operator’s manual or instruction sheet furnished by Husqvarna.
Een belangrijk punt na aankoop van elk apparaat Husqvarna LTH140 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Husqvarna LTH140 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Husqvarna LTH140 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Husqvarna LTH140 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Husqvarna LTH140 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Husqvarna LTH140 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Husqvarna LTH140 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Husqvarna LTH140 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
