Gebruiksaanwijzing /service van het product 1483DSV van de fabrikant IBM
Ga naar pagina of 141
1483/1483DSV Displa y Station Operator’ s Man ual P/N 701344-003.
ii 701344-003 E L U D E H C S N O I S I V E R / E U S S I s t n e m m o C. o N . v e Re t a D e s a e l e R l a i t i n I e u s s i e R e t e l p m o C 1 0 0 - 4 4 3 1 0 7 2 0 0 - 4 4 3 1 0 7 / 5 04 9.
701344-003 iii This equipment complies with FCC regulations for EMI. This equipment generates, uses, and can radiate radio fr equency energy , and, if not installed and used in accor - dance with the manual, may cause interference to radio communications.
Page 701344-003 v T able of Contents Chapter 1. Introduction ............................................................................................ 1- 1 Standard Features ..........................................................................
Page vi 701344-003 T ab le of Contents K eyboard Operations ...................................................................................... 4-4 Moving the Cursor ..................................................................................
Page 701344-003 vii T ab le of Contents Operation ........................................................................................................ 8-2 Entering Split Screen Mode .................................................................
Page viii 701344-003.
Page 701344-003 ix List of Illustrations Figure 2-1. 1483 Receptacle Connectors .................................................... 2- 3 Figure 2-2. Off line T est Menu .................................................................... 2-6 Figure 3-1.
701344-003 1-1 Chapter 1. Intr oduction The 1483 and the 1483DSV Enhanced Function Display Stations (hereafter referred to as the 1483) are ergonomicall y designed data entry display stations that of fer a wide range of functions and applications. The 1483 can be used with a color monitor or a monochrome monitor .
1-2 701344-003 Intr oduction • Memorex T ele x 1274 Control Unit • Memorex T ele x 1374 Control Unit • Memorex T ele x 2374 Control Unit • Memorex 2274 Control Unit • IBM 3174 Control Unit .
701344-003 1-3 Intr oduction Passwo rd Protection – Y ou can select to limit access to all the setup menus or to just the System Manager menu, or you can select no password protection at all. Selectable V ertical Refresh Rate – The 1483 is designed for use with a super V GA (SVGA) monitor .
1-4 701344-003 Intr oduction A udible Alarm – Sounds when a character is entered in the next-to-last character position of the screen (if the last character position is unprotected) or when the host system signals the terminal.
701344-003 1-5 Intr oduction Repeat Delay – Y ou can select a short, medium, or long time interv al bef ore starting the continuous display of characters on autorepeat keys. Serial Number Entry – In Offline mode, you can verify or enter the display station serial number .
701344-003 2-1 Chapter 2. Customer Installation This chapter lists the physical statistics and en vironmental requirements for the 1483. It also describes the procedures for setting up the display station and performing a pre liminary operating test. The 1483 is designed to be installed by the user .
2-2 701344-003 Customer Installation For units operating at 200–240V : The po wer cable required for domestic units is a UL listed, CSA certified, 18/3 A WG, type SVT or SJT cable (15-foot [4.6-meter] maxim um). It is ter minated on one end by a 250V , 15A grounding type attachment connector .
701344-003 2-3 Customer Installation Setting Up the Displa y Station 1 ) Place the Display element on top of the Logic element and place both within co nnecting distance of an appropriate A C po wer outlet. 2) Place the ke yboard in front of the Logic element.
2-4 701344-003 Customer Installation 5) Make sure that the Po wer-On/Off switch is set to O (Of f) on both the Logic ele ment and the Display element. There are two A C power cables. F ollow the instruction in Step 6 to install one po wer cable and follow the instructions in Step 7 to install the other po wer cable.
701344-003 2-5 Customer Installation 2) Align the end of the connector cable with the Coax connector that is on the back of the Logic element (see Figure 2-1 on Page 2-3). Connect the cab le and secure it in place by turning the retaining ring clockwise until it is tight.
2-6 701344-003 Customer Installation Conducting the Preliminary Operating T est 1) Ensure that the system control unit is powered on and operational. 2) T u rn the Power On/Of f switch to Off (O) . 3) Set the Power -On/Off switch to On ( | ) while simultaneously holding down the space bar .
701344-003 3-1 Chapter 3. Setup Men us, Contr ols, and Indicator s This chapter describes the display controls, ke yboard controls, and display indicators on the 1483 and its attached keyboard.
3-2 701344-003 Setup Menus, Contr ols, and Indicators Native Mode Nativ e mode causes the display station to provide to the attached controller uncon verted keyboard scan codes which are defined by the controller depending on ho w it is configured. Nativ e mode is av ailable on the 102/103-ke y , 104-k ey , and 122-k ey key boards.
701344-003 3-3 Setup Menus, Contr ols, and Indicators Ke yboard Contr ols This section describes keys on the 102/103-k ey , 104-key , and 122-key k eyboards that control functions associated with the display . Alt –Simultaneously press the Alt k ey and any other ke y to activ ate functions specif ied on the front key f ace.
3-4 701344-003 Setup Menus, Contr ols, and Indicators Each keyboard type contains autorepeat ke ys that repeat their functions as long as they are pressed.
701344-003 3-5 Setup Menus, Contr ols, and Indicators Press Reset to remain online with no loss of data, or press Enter to go offline. Or W ith the display po wer of f, press and hold down the space bar and sim ultaneously turn on the display station.
3-6 701344-003 Setup Menus, Contr ols, and Indicators 3) Th e User Defined Data selection displays a panel of Extended V ital Product Data information. This panel is for infor ma tion only . Extended V ital Product Dat a cannot be entered or changed from the 1483.
701344-003 3-7 Setup Menus, Contr ols, and Indicators Figure 3-3. Off line Screen Men u MONOCASE/DualCase T o select MONOCASE or DualCase mode, highlight MONOCASE/DualCase and press the Enter key to toggle between MONOCASE and DualCase . When MONOCASE is selected, all characters are displayed on the screen as uppercase letters .
3-8 701344-003 Setup Menus, Contr ols, and Indicators MUP Overstrikes W ith MUP Overstrikes set to Ye s , the selected MUP symbol ov erstrikes the displayed character .
701344-003 3-9 Setup Menus, Contr ols, and Indicators Intensity Control The Intensity Control setting enables you to deter mine the area to be highlighted. There are three settings for Intensity Control : Normal (the default), Data only , and Highlight .
3-10 701344-003 Setup Menus, Contr ols, and Indicators Offline Cursor Menu T o display the options on the Of fline Cursor menu, use the Left and Right Arrow k eys to highlight Cursor on any off line setup menu and press the Enter ke y . The Of fline Cursor menu is displayed (Figure 3-5, below).
701344-003 3-11 Setup Menus, Contr ols, and Indicators Stationary Rule The rule cursor can function as a horizontal or vertical ruler . If you select Stationary for the Stationary Rule , the rule line does not move with the cursor , but remains as an alignment aid for columns or ro ws.
3-12 701344-003 Setup Menus, Contr ols, and Indicators Offline Ke yboard Menu T o display the options on the Of fline Ke yboard menu, use the Left and Right Arro w ke ys to highlight Keyboard on an y offline setup menu and press the Enter ke y . The Of fline Ke yboard menu is displayed (Figure 3-6, below).
701344-003 3-13 Setup Menus, Contr ols, and Indicators When the display station goes of fline, the menu setting for Click Enab le is sav ed. Changes made to the keyboard clic k by the controller or by the Alt/F24 toggle key combination are not sav ed when the display station goes of fline.
3-14 701344-003 Setup Menus, Contr ols, and Indicators • Data Entry Keyboard (Nativ e Mode Data Entry Ke yboard) • APL Keyboard (Nativ e Mode APL Ke yboard) • User Define - 01 (Nativ e Mode T yp.
701344-003 3-15 Setup Menus, Contr ols, and Indicators 3) If you entered the password correctly , you ar e prompted for a new passwo rd. The next three ke ystrokes are taken as the ne w pass word. 4) Y ou are then prompted to reenter the ne w password to verify the change.
3-16 701344-003 Setup Menus, Contr ols, and Indicators Highlight Printer on the Of fline Printer menu and press Enter to cycle through these choices: • 4201 Proprinter (IBM Proprinters II and III) .
701344-003 3-17 Setup Menus, Contr ols, and Indicators Pr ogram Setup Strings for Prints Y ou can specify print attrib utes for any suppor ted printer by setting the po wer-on sequence. T he programmed po wer-on sequence over rides the printer’ s resident p ow e r - on sequence when the printer is powered on or the display station goes online.
3-18 701344-003 Setup Menus, Contr ols, and Indicators Figure 3-8. Pr ogrammable Setup Strings f or Prints Screen Host Addressable Print The host addressable print feature enables the host to send print requests to the 1483’ s attached printer . LU2 (screen) prints are always formatted by the display according to the printer menu selections.
701344-003 3-19 Setup Menus, Contr ols, and Indicators If you select System , then formatting of LU1 or LU3 will not be handled by the display . In addition, CPI/LPI menu information will not be used to initializ e the printer , and there will not be automatic form feed or new line performed by the display .
3-20 701344-003 Setup Menus, Contr ols, and Indicators FF ignored when not in first print position If you select Ye s for this option, a form feed character in the first position or ne xt to the maximum print position is executed w hile for m feed commands in an y other positions are printed as blank characters and are otherwise ignored.
701344-003 3-21 Setup Menus, Contr ols, and Indicators Printer TRPQs A collection of printer TRPQs can be accessed from the Of fline Printer menu by pressing the F9 (or PF9) key . The TRPQs are software features that permit additional printer controls.
3-22 701344-003 Setup Menus, Contr ols, and Indicators Offline Miscellaneous Menu T o display the options on the Of f line Miscellaneous menu, use the Left and Right Arro w keys to highlight Miscellaneous on an y off line setup menu and press the Enter key .
701344-003 3-23 Setup Menus, Contr ols, and Indicators Dim Style When Status Row Only is selected and the display has been inacti ve f or the amount of time set in the Dim T imer, the screen blanks, and only the operator status r ow and cur sor are displayed.
3-24 701344-003 Setup Menus, Contr ols, and Indicators T o turn the Coax indicator on or of f, highlight Coax Indicator and pr ess the Enter key to toggle the indicator On or Off (default).
701344-003 3-25 Setup Menus, Contr ols, and Indicators Color T o change the display color selections, highlight Color and press the Enter key to c ycle through the selections. When a selection is displayed, it is acti ve. Note: If you select the same color for the foreground and background, the foreg round color defaults to black.
3-26 701344-003 Setup Menus, Contr ols, and Indicators 2) Press the Enter ke y to cycle up (increment) through numbers 1 through 63 . As each new number is displayed, the color of the number changes. F or example, if you change C1 Blue from 10 (the default setting) to 55 (white), all f ields to which C1 Blue has been assigned are no w white.
701344-003 3-27 Setup Menus, Contr ols, and Indicators Online Setup Mode The follo wing parameters are set or changed utilizing full screen menus that are displayed after you enter Setup mode. Setup mode can be entered at any time while the display station is operating either online or of fline.
3-28 701344-003 Setup Menus, Contr ols, and Indicators • Play/Record Options • Reset NVRAM 6) When you finish selecting options on an Online Setup menu, press the Reset ke y to store the current v alues or continue to select options on other Online Setup menus.
701344-003 3-29 Setup Menus, Contr ols, and Indicators Online Cursor Men u T o display the options on the Online Cursor menu, use the Left and Right Ar r o w ke ys to highlight Cursor on any online setup men u and press the Enter key . The Online Cursor menu is displayed (Figure 3-12, below).
3-30 701344-003 Setup Menus, Contr ols, and Indicators Online Ke yboard Menu T o display the options on the Online K eyboard menu, use the Left and Right Arrow ke ys to highlight Keyboard on an y online setup menu and pr ess the Enter key . The Online Ke yboard menu is displa yed (Figure 3-13, belo w).
701344-003 3-31 Setup Menus, Contr ols, and Indicators Online Printer Menu T o display the options on the Online Printer men u, use the Left and Right Arrow k eys to highlight Printer on any online setup menu and press the Enter key . The Online Printer menu is displayed (Figure 3-14, below).
3-32 701344-003 Setup Menus, Contr ols, and Indicators Print Quality If the local screen printer supports it, you can select a print quality setting of NLQ (Near Letter Quality) or Draft (Draft Quality). T o change the print quality , highlight Quality on the Online Printer menu and press Enter to toggle to the setting required.
701344-003 3-33 Setup Menus, Contr ols, and Indicators Wide P aper Y ou can specify the use of wide paper on a printer that suppor ts it. T o change the setting, highlight Wide Paper on the Online Printer menu and press Enter to to ggle between No (default) and Ye s .
3-34 701344-003 Setup Menus, Contr ols, and Indicators Suppress Null Lines This menu selection enables you to print more data on the printer page by suppressing the printing of null lines. T o set this feature on or of f, highlight Suppress Null Lines on the Online Printer menu and press Enter to select Ye s or No .
701344-003 3-35 Setup Menus, Contr ols, and Indicators • C6 (yellow) • C7 (white) For monochrome monitors: Press the Enter ke y to toggle between Intensified (the default) and Nor mal . Print P osition By adjusting Print Position , y ou can specify the alignment of printed output.
3-36 701344-003 Setup Menus, Contr ols, and Indicators • HEX DUMP – con verts each byte of data which would ha v e normally been sent to the printer to two bytes of data in a hexadecimal format. The tw o bytes are then sent to the printer so that the data stream is printed out as hex bytes to allo w for analysis of the data being sent.
701344-003 3-37 Setup Menus, Contr ols, and Indicators Multiple Pairs The %%-%% data string turns on exclusion mode b ut is not sent to the Exclusion Mode printer . Nothing is sent to the printer unless it is within the Multiple Pairs NDS. The %%+%% data string turns of f the exclusion mode and is not sent to the printer .
3-38 701344-003 Setup Menus, Contr ols, and Indicators Online Miscellaneous Menu T o display the options on the Online Miscellaneous menu, use the Left and Right Arro w keys to highlight Miscellaneous on an y online setup menu and press the Enter key .
701344-003 3-39 Setup Menus, Contr ols, and Indicators Online Color Menu The Color option and Color menu are displayed only if a color monitor is attached to the 1483. T o display the Online Color menu, use the Left and Right Arro w keys to highlight Color and press the Enter key .
3-40 701344-003 Setup Menus, Contr ols, and Indicators Operator Status Row Indicator s The operator status ro w is the area below the last data ro w and is separated from the rest of the screen by one nonintensified line. The operator sta tus ro w contains symbols that indicate current operating conditions.
701344-003 3-41 Setup Menus, Contr ols, and Indicators Readiness and System Connection Symbols These symbols are displayed either alone or in combinations to indicate the readiness status of the display station, control unit, and system.
3-42 701344-003 Setup Menus, Contr ols, and Indicators l o b m y S e m a N g n i n a e M ? r e b m u N t a h W s i h T . d l e i f s i h t n i d e r e t n e e b n a c s r e t c a r a h c c i r e m u n n i a t r e c y l n O t o n s i r e b m u n D I r e t n i r P d e t c e l e s a n e h w d e y a l p s i d s i l o b m y s .
701344-003 3-43 Setup Menus, Contr ols, and Indicators Reminder Symbols These messages are a reminder that a condition has occurred. Shift and Mode Symbols These messages indicate the shift and mode the keyboard is using . l o b m y S e m a N g n i n a e M k c o L y t i r u c e S c i n o r t c e l E e h t g n i s U “ o t r e f e R .
3-44 701344-003 Setup Menus, Contr ols, and Indicators Printer Status Symbols These messages are displayed during print operations to indicate where the operation is performed and the progress of the print job .
701344-003 3-45 Setup Menus, Contr ols, and Indicators Response Time Monitor Indicator s Local Symbols The following types of operator status ro w symbols are generated by a locally attached device: .
3-46 701344-003 Setup Menus, Contr ols, and Indicators Record/Pla y Symbols These messages are displayed on the operator status ro w when the display station is in Record/Play mode. Device Dependent Symbols l o b m y S e m a N g n i n a e M K N d n a , K , Ly a l p s i Dl a n i m r e Tr o r r E o t r e f e R .
701344-003 4-1 Chapter 4. Operating Pr ocedures Before you begin to operate the 1483, ensure that the display station is attached to a powered, operational control unit or processor . Refer to P a ge 1-1 for a list of compatible control units and processors.
4-2 701344-003 Operating Procedures Adjusting the Screen Displa y The 1483 is designed to operate with a color SVGA or VGA, or a monochrome SV GA or VGA monitor .
701344-003 4-3 Operating Procedures Assigning a Coax Printer Each display station in a system configuration can be assigned a Host printer for generating copies of information displayed on the screen. T hese copies can be used to maintain records of terminal/CPU transactions.
4-4 701344-003 Operating Procedures Figure 4-1. T ypical Formatted Screen Unprotected fields are classified as either alphan umer ic or numeric. Alphanumeric fields can accommoda te both alphabetic and numeric data characters.
701344-003 4-5 Operating Procedures Mo ving the Cursor The cursor always indicates the ne xt available character position on the screen. Fo r applications using an unformatted display screen, select the location for the next character to be entered by moving the cursor to the selected screen position.
4-6 701344-003 Operating Procedures Entering Data Characters and Selecting Modes Alphabetic, numeric, and special characters can be entered by pressing their corresponding keys.
701344-003 4-7 Operating Procedures The Shift Lock key does not o verride the Numeric Lock feature. K eystr oke Record/Playbac k The Ke ystroke Record/Playbac k function enables you to reduce the number of k ey strokes required for a frequently repeated entry such as a logon sequence or an ad dr ess.
4-8 701344-003 Operating Procedures 5) If you want to stop recording keystrok es momentarily to perform other operations, press the Alt key follo wed by the Pause k ey . The symbol R ^ is displayed on the operator status row . Press the Pause ke y again to continue recording keystrokes.
701344-003 4-9 Operating Procedures Cursor Select Data Entry The Cursor Select ke y , CrSel, can be used to select cer tain data fields from a formatted screen. The application program must define selectable fields by wr it ing the appropriate attrib ute.
4-10 701344-003 Operating Procedures Press the Delete ke y ( ) (Delete on 102/103-key ke yboard) to remove a character at the cursor’ s current position.
701344-003 4-11 Operating Procedures Print Function The display station can send a print request to the host system or it can print data locally if a local screen printer is attached. A desktop/screen printer must be ordered separately . T o initiate host printing or local screen printing, press the Print k ey .
4-12 701344-003 Operating Procedures If you select the PRINT TRIM option, the screen is displayed with a box around the printable area or the last print area def ined with this option.
701344-003 4-13 Operating Procedures Session Control Select Session Control b y using the arrow ke ys to highlight Session Control on the Paper Control Options menu.
4-14 701344-003 Operating Procedures P ar titioning The Partitioning function is a controlled function. T o use the Partitioning function, y our display station must be attached to a controller that supports partitioning. The display receiv es partitioning commands from the host only while in Nati ve mode.
701344-003 4-15 Operating Procedures Figure 4-6. Extended Select Over lay (102-Key K eyboards) Entry Assist The Entry Assist function facilitates the crea tion and editing of text such as memos, letters, and documents. For more informa tion on the Entry Assist function, see Chapter 5, “Entry Assist.
4-16 701344-003 Operating Procedures Setting the Ke yboard Switches thr ough Ke y Sequences T o set the keyboard switches through k ey sequences, follo w these steps: 1) Press the left Alt, Reset, and Caps Lock ke ys at the same time. Y ou enter ID Set mode with all switches set to Off (indicated by I in the table abo v e).
701344-003 4-17 Operating Procedures Displa y Indicators P ower-On When lit, the Logic element Power -On indicator indicates that the Logic element is powered on and the Display element Po wer-On indicator indicates that the Display element is powered on.
4-18 701344-003 Operating Procedures Using the Electr onic Security Lock T o in vok e the secure (locked) mode, the operator enters the Lock sequence (Right Alt key , Right Shift k ey , and Enter key).
701344-003 5-1 Chapter 5. Entry Assist The Entry Assist function enhances data entry , formatting, and editing on the 1483. Access to the Entry Assist function with the 104-key , and 122-key ke yboards is achieved b y pressing the ExSel key , follo wed by the F13 or PF13 (Document-On/Off) ke y .
5-2 701344-003 Entr y Assist In addition to the format controls (discussed below) supported in Change F or mat mode, the following functions are supported in Document mode: • Screen margins • T ab.
701344-003 5-3 Entr y Assist Figure 5-1. The Format Scale T o hide the format scale, press the Chg Fmt key again. Use the Cursor Left ( ) and Cursor Right ( ) keys to mov e the format scale cursor to the desired position. Once the format scale cursor is in position, press the appropriate format function key .
5-4 701344-003 Entr y Assist When a margin is redef ined, the margin symbol is replaced by a symbol for the ne w margin. T ab stops and the end-of-line signal mar ker are retained e ven if the y are placed outside the new mar gins.
701344-003 5-5 Entr y Assist T ab stops are set by placing the format scale cursor in the desir ed position, then pressing the Forward T ab ke y . The format scale displays an underscore ( _ ) in the ne w tab stop position unless a margin symbol or end-of-line signal symbol is in the selected position.
5-6 701344-003 Entr y Assist • Delete word to the right. • Autorepeat deletion of character to the right. • T ab function inserting space characters. • Backtab function. • Backspacing with deletion. • New line function observing left mar gin.
701344-003 5-7 Entr y Assist If the display is in Insert mode and a word is inserted on a line, any w or d pushed beyond the right margin may be wrapped to the ne xt line if the next line contains enough spaces after its last word or its mar gins contain enough nulls to make room for the wrapped word.
5-8 701344-003 Entr y Assist Cursor T abbing Pressing the Forw ard T ab key ( ) causes the cursor to mo ve to the next unprotected tab stop. Intervening unprotected null characters are con verted to space characters to preserve the format when data is transmitted to the host CPU.
701344-003 6-1 Chapter 6. Calculator Operation The 1483 has a built-in calculator that allo ws you to add, subtract, multiply , and divide positiv e and ne gativ e numbers in decimal, binary , or Hex, and calculate percentages in decimal. Computations up to 13 digits long are supported.
6-2 701344-003 Calculator Operation J umping Between Calculator Mode and Normal Operation If you want to return ke yboard functionality to the coax screen without losing the calculator display , pr ess the F12/F24 k ey . Mak e the changes to the coax screen, then press the Alt and F12/F24 k eys to return to Calculator mode.
701344-003 6-3 Calculator Operation T o set the decimal place, with the 1483 in Decimal Calculator mode, press the PF3 key , then: T o set from 0 thr ough 9 decimal places – press the 0 through 9 key ( D0 through D9 is displayed at the top of the Results field) Or T o not specify the number of decimal places – press the N key .
6-4 701344-003 Calculator Operation The calculated percentage is displayed in the Results field of the calculator simulation. Other Calculator Functions Press the C/E ke y once to clear the current entry . Press the C/E key a second time to clear the current total.
701344-003 6-5 Calculator Operation Binary Calculator Figure 6-2. Simulated Binary Calculator Binary Mathematical Operations Use the numeric keys on the numeric keypad or the main k eypad (1 or 0) to enter numbers for calculation. After entering a number , enter the mathematical symbol designating the operation to be performed.
6-6 701344-003 Calculator Operation Other Calculator Functions Press the C/E key once to clear the current entry . Press the C/E key again to clear the current total. Y ou can also use the Clear ke y on the main keyboard. Press the M + X key to add the currently displayed v alue to memory .
701344-003 6-7 Calculator Operation Hex Mathematical Operations Use the numeric keys on the numeric keypad (0 thr ough 9) and the keys A through F to enter numbers to be operated on. Y ou can also use the main k eypad to enter numbers (0 through 9) and the ke ys A through F .
701344-003 7-1 Chapter 7. Pr oblem Determination and Maintenance Diagnostic T esting Function The 1483 Display Station can perform two types of diagnostic tests: of fline tests that check the operatio.
7-2 701344-003 Prob lem Determination and Maintenance System Manager Menu T o utilize the System Manager menus, highlight System Manager Menus on the Offline T est menu and press the Enter k ey . If passwor d protection is enabled (see Pag e 7-5), you are prompted to enter the password.
701344-003 7-3 Pr oblem Determination and Maintenance KBD T est T o test the keyboard, highlight KBD T est on the System Manager menu and press the Enter key . A sample ke yboard layout is displayed. Figure 7-2. KDB T est Note: This is a sample keyboar d test screen.
7-4 701344-003 Prob lem Determination and Maintenance Mod Size T est T o start this test, highlight Mod Siz e T est on the System Manager menu and press Enter . This test displays a test screen for each of the selectable screen sizes. The test screen changes from Mod 2, to Mod 3, to Mod 4, to Mod 5 each time you press the Enter k ey .
701344-003 7-5 Pr oblem Determination and Maintenance Press the F3 ke y to decrease the contrast le vel or press the F4 ke y to incr ease the contrast lev el. Figure 7-4. Scr een Centering Scr een Selecting Pass wor d Pr otection Use the Password option to set password security options for access to setup menus.
7-6 701344-003 Prob lem Determination and Maintenance Before changing keyboard styles, clear out the current password by selecting Disabled , change keyboards, then enable passw ord protection by selecting System Manager Menu or All Menus and enter a ne w password with the Enter Password option, belo w .
701344-003 7-7 Pr oblem Determination and Maintenance Init NVRAM Counters This menu selection enables you to reset the NVRAM counter to zero. The NVRAM counter records all resets to NVRAM by the system or by the operator . T o initialize the NVRAM counters, highlight Init NVRam counters on the System Manager menu and press the Enter key .
7-8 701344-003 Prob lem Determination and Maintenance Reset NVRAM When you reset NVRAM, you reset all setup options to their default settings. T o reset NVRAM, highlight Reset NVRAM on the System Manager menu and press the Enter key .
701344-003 7-9 Pr oblem Determination and Maintenance s n o i t p O p u t e S r o f s g n i t t e S t l u a f e D n o i t p O g n i t t e S t l u a f e D n o i t i s o p t n i r p t s r i f n i t o n .
7-10 701344-003 Prob lem Determination and Maintenance s n o i t p O p u t e S r o f s g n i t t e S t l u a f e D n o i t p O g n i t t e S t l u a f e D r o l o c d n u o r g k c a B* * 0 C .
701344-003 7-11 Pr oblem Determination and Maintenance Figure 7-5. User Def ined Data Scr een User Defined Data Screen Fields Label – A 15-character information-only f ield. Y ou cannot enter or change information in this field. Data – A 25-character information-only field.
7-12 701344-003 Prob lem Determination and Maintenance Symptom/Action Char t m o t p m y S n o i t c A d e d n e m m o c e R r o t a c i d n i n O – r e w o P e h T . f f o s y a t s . n o d e h c t i w s s i h c t i w s r e w o P e h t t a h t e r u s n E .
701344-003 7-13 Pr oblem Determination and Maintenance Symptom Recommended A cti on The alarm f ail s to so und. 1. Enter eith er Offline Setup mode ( K eybo ard menu ) or Onli ne Setup mod e (Alarm V olume Functi on) as desc ribed i n Chapter 3 t o set the Alarm V olume to the de sired lev e l.
7-14 701344-003 Prob lem Determination and Maintenance Error Code (Operator Stat us Ro w) Recommended A cti on 1. This is not a display stat ion failure. 2. Press the Reset key to retr y the failed operation. 3. If the s ymptom persists, notify y our supervisor .
701344-003 8-1 Chapter 8. Operating the Split Screen Feature W ith the 1483 Display Station, you can display and operate two sessions on one monitor in either a top and bottom format or a zoomed session (that is, one of the two sessions occupies the entire display surface and you toggle between the two sessions).
8-2 701344-003 Operating the Split Screen Feature Operation The following sections tell you ho w to enter Split Screen mode and use the split screen enhancements. Entering Split Screen Mode T o enter Split Screen mode, press and hold down the Alt ke y while you press the Dual key .
701344-003 8-3 Operating the Split Screen Feature K ey Assignments Only the 122-key k eyboard is supported for Split Screen mode. See Figure 8-2, below , for the location of the split screen command keys.
8-4 701344-003 Operating the Split Screen Feature Select T op Press the Select T op ke y ( ) to position the cursor in the session on the top of the display when the display is in split format. The Select T op ke y operates in zoom and split modes. T he session on the top is no w the acti v e session and recei v es immediate screen updates.
701344-003 8-5 Operating the Split Screen Feature Step Active Session Press and hold the Alt key while you press the ChgSc ke y to chang e the acti ve session to make the next highest session the acti ve session. Do not change the acti ve session using any other ke ystroke sequence.
8-6 701344-003 Operating the Split Screen Feature Mark T o select a field as the source field for a subsequent paste operation, hold do wn the Alt key while you press the F4 ke y (Mark).
701344-003 8-7 Operating the Split Screen Feature Mark/P aste Use the Mark/Paste feature to cop y data between sessions. W ith this feature, you can quickly mark and paste data between fields in dif ferent sessions. Mark Field The mark field is the f ield you highlight as the source da ta f ield .
8-8 701344-003 Operating the Split Screen Feature Block Cop y While the top session is activ e, use Alt-PF11 to acti v ate the Block Cop y feature. A trim box will appear in the top session and a rev erse f ield block will appear in the bottom session.
701344-003 8-9 Operating the Split Screen Feature After locating the Rev erse V ideo box, use the Paste key to copy the data to the bottom session. Since the Block Copy Feature remains acti ve, you can mov e the block and copy again to a second location.
8-10 701344-003 Operating the Split Screen Feature Screen Print Mode T o perform a screen print in Split Screen mode, you must Zoom in on the session from which you want to print.
701344-003 9-1 Chapter 9. Operating the Dual Screen Feature W ith the 1483DSV Display Station, you can display and operate two sessions on one monitor in either a side-by-side format or a zoomed session (that is, one of the two sessions occupies the entire display surface and you toggle between the two sessions).
9-2 701344-003 Operating the Dual Screen Features Operation The following sections tell you ho w to enter Dual Screen mode and use the dual screen enhancements. Entering Dual Screen Mode T o enter Dual Screen mode, press and hold down the Alt ke y while you pr ess the Dual key .
701344-003 9-3 Operating the Dual Screen Features K ey Assignments Only the 122-key ke yboard is supported for Dual Screen mode. See Figure 9-2, below , for the location of the dual screen command keys.
9-4 701344-003 Operating the Dual Screen Features Select Left Press the Select Left ke y ( ) to position the cursor in the session on the left side of the display when the display is in side-by-side format. The Select Left k ey operates in zoom and side-by-side modes.
701344-003 9-5 Operating the Dual Screen Features Step Active Session Press and hold the Alt key while you press the ChgSc ke y to chang e the acti ve session to make the next highest session the acti v e session. The cursor does not change sides and the session that is not selected is not aff ected.
9-6 701344-003 Operating the Dual Screen Features Mark T o select a field as the source field for a subsequent paste operation, hold do wn the Alt key while you press the F4 ke y (Mark).
701344-003 9-7 Operating the Dual Screen Features Mark/P aste Use the Mark/Paste feature to cop y data between sessions. W ith this feature, you can quickly mark and paste data between fields in dif ferent sessions. Mark Field The mark field is the f ield you highlight as the source da ta f ield .
9-8 701344-003 Operating the Dual Screen Features W alk Through The following e xample shows y ou ho w to set up a dual scr een session on the 1483. First, power on the display station, then follo w these steps: 1) Press the Alt-Dual k ey sequence. Y ou enter Dual Screen mode.
701344-003 A-1 Appendix A. Printer Inf ormation This appendix describes the supported character sets and DIP or Mode Select switch settings for some supported printers. Suppor ted Character Sets Switch Settings Set the following DIP or Mode Select switches to ensure optimal printer performance.
A-2 701344-003 Printer Information Hewlett-P ackar d DeskJet Refer to the manual that came with your printer for the location of the Mode Select switches.
701344-003 A-3 Printer Information Epson FX1050 Refer to the manual that came with your printer for the location of the DIP switches. DIP Sw itch Setting Desc rip ti on 1-1 Down (o f f ) The de fault .
A-4 701344-003 Printer Information Epson LQ1050 Refer to the manual that came with your printer for the location of the DIP switches. 4019 Datastream Modes The 1483 supports two datastream modes for the 4019, Personal Printer Data Stream (PPDS) mode and Hewlett-P ackard (HP) Emulation mode.
701344-003 Index-1 Symbols 4019 datastream modes, A-4 A Alarm V olume option, 3-12 Alt key , 3-3 Arro w keys, 4-5 Auto Skip Mode option, 3-34 Auto Skip option, 3-34 Autorepeat ke ys, 3-4, 5-7 B Backsp.
Index-2 701344-003 Index Cursor Speed option, 3-13 D Data entry Characters, entering, 4-5 Cursor , moving, 4-5 Cursor Select, 4-9 Description of, 4-3 Editing, 4-9 Extended Select function, 4-14 Messag.
701344-003 Index-3 Index Entry Assist continued Cursor , moving, 5-5 Cursor tabbing, 5-8 Delete word, 5-7 Description of, 4-15 Document mode, 5-2 Editing, 5-5 End-of-line signal, 5-5 Forma t controls,.
Index-4 701344-003 Index K eys continued Autorepeat, 3-4, 5-7 Backspace, 4-5, 5-8 Backtab, 4-5, 5-8 Change Format, 5-2 CrSel, 4-9 Cursor Left, 5-7 Cursor Right, 5-7 Cursor Select, 4-9 Decimal calculat.
701344-003 Index-5 Index Modes continued Numeric Lock, 4-6 Offline Setup, 3-4 - 3-26, 7-2 - 7-10 Online Setup, 3-27 - 3-39 Personal Printer Data Stream (PPDS) mode, A-4 Record/Play Security , 4-8 Shif.
Index-6 701344-003 Index Rule Stationary , 3-11 Style, 3-10 Rule Color option, 3-11 Rule Style option, 3-10 S Screen Adjusting display of, 2-5, 4-2 Partitioning, 3-8 Row/Column, position of, 3-8 Size,.
701344-003 Index-7 Index Split screen mode Activ e and suspended screens, 8-2 Enhancements, 8-3 Entering, 8-2 Example, 8-9 Ke y assignments, 8-3 Ke yboard keys, 8-3 Screen Print mode, 8-10 T op and bo.
Een belangrijk punt na aankoop van elk apparaat IBM 1483DSV (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen IBM 1483DSV heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens IBM 1483DSV vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding IBM 1483DSV leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over IBM 1483DSV krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van IBM 1483DSV bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de IBM 1483DSV kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met IBM 1483DSV . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
