Gebruiksaanwijzing /service van het product 600/600E (2645) van de fabrikant IBM
Ga naar pagina of 124
S10L-9619-03 IBM Mobile Systems ThinkPad 600/600E (2645) Hardware Maintenance Manual June 1999.
Note Before using this information and the product it supports, be sure to read the general information under “Notices” on page 117. Fourth Edition (June 1999) The following paragraph does not app.
Related Publications The following product publications are available through IBM or your IBM Authorized Dealer. Related Diskettes The following diskettes are available through IBM or your IBM Authorized Dealer.
Diskette Part, Form Number ThinkPad 300 (2615) Advanced Diagnostics Diskette 33G9361, S33G-9361 ThinkPad 350, 350C, 425, 425C (2618) Advanced Diagnostics Diskette A211000, GA21-1000 ThinkPad 365 (2625.
Contents General Descriptions . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . 1 Important Service Information .......... 1 Drive and Diskette Compatibility Matrix ..... 3 Safety Notices (Multi-lingual Translations) .
Beep Symptoms . . . . . . . . . . . . . . . . 57 Audio-Related Symptoms . . . . . . . . . . . 58 CD-ROM-Related Symptoms . . . . . . . . . . 58 Function-Related Symptoms . . . . . . . . . . 60 Indicator-Related Symptoms . . . . . . . . . . 60 Infrared-Related Symptoms .
Introduction General Descriptions This chapter includes the descriptions for all ThinkPad models. Some descriptions might not apply to the particular computer. Introduction Important Service Information Important Diskette fixes are customer installable.
Introduction Attention A customized setup configuration (other than default settings) may exist on the computer you are servicing. Running Automatic Configuration may alter those settings. Note the current configuration settings (using the View Configuration option) and verify that the settings are in place when service is complete.
Introduction Drive and Diskette Compatibility Matrix The following table provides identification information for 3.5-inch drives. Diskette Drive Identifying Mark 3.5-Inch - 1.44MB 1.44 on the eject button 3.5-Inch - 2.88MB 2.88 on the eject button The following table provides compatibility information for 3.
Introduction Safety Notice 1 Before the computer is powered-on after FRU replacement, make sure all screws, springs, or other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds.
Introduction Safety Notice 2 Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble it, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations.
Introduction Safety Notice 3 The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
Introduction Safety Notice 4 The lithium battery can cause a fire, explosion, or severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
Introduction Safety Notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes. Seek medical care if any symptoms from the fluid are present after washing.
Introduction Safety Notice 6 To avoid shock, do not remove the plastic cover that surrounds the lower portion of the inverter card. Afin d'éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d'alimentation.
Introduction Safety Notice 8 Before removing any FRU, power-off the computer, unplug all power cords from electrical outlets, remove the battery pack, then disconnect any interconnecting cables.
Introduction Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine. Keep your tool case away from walk areas so that other people will not trip over it. Do not wear loose clothing that can be trapped in the moving parts of a machine.
Introduction If you need to work on a machine that has exposed electrical circuits, observe the following precautions: – Ensure that another person, familiar with the power-off controls, is near you. Attention: Another person must be there to switch off the power, if necessary.
Introduction Safety Inspection Guide: The intent of this inspection guide is to assist you in identifying potentially unsafe conditions on these products. Each machine, as it was designed and built, had required safety items installed to protect users and service personnel from injury.
Introduction Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes 1. Use product-specific ESD procedures when they exceed the requirements noted here.
Introduction Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
Introduction Some CD-ROM drives contain an embedded Class 3A or Class 3B laser diode. Note the following. DANGER: Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
Read This First Read This First Before you go to the checkout guide, be sure to read this section. Important Notes Only certified trained personnel should service the computer . Read the entire FRU removal and replacement page before replacing any FRU .
Read This First Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following: Note During the warranty period, the customer may .
FRU Replacement Notices FRU Replacement Notices This section contains notices for removal and replacement. Read this section carefully before replacing any FRU. LCD Replacement Notice The TFT LCD for the computer contains over 2,359,296 thin-film transistors (TFTs).
FRU Replacement Notices Torque driver If you have a torque driver, refer to the “Torque” column with each step. Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table if you have a torque screwdriver.
FRU Replacement Notices You must restore each of those serial numbers except the system board serial number to its original number when replacing the system board. To save the original serial numbers, do the following: 1. Boot from DOS, or open an MS-DOS prompt.
FRU Replacement Notices 4. Press Ctrl + G . The UUID menu appears. 5. Press F5 to generate a new UUID, and press Enter to overwrite it to EEPROM. CPU Card Replacement Notice (600E and 770X Only) You must restore the CPU card serial number to its original number, when the CPU card is replaced.
Related Service Information Related Service Information This section provides information about the following: “How to Use Error Messages” “How to Diagnose Multiple FRUs” “Reset .
Related Service Information 1. Insert the ThinkPad Hardware Maintenance Diskette Version 1.05 or a later version into the diskette drive and power on the computer. 2. Select Format the hard disk from the main menu. 3. Select the drive from the menu. 4.
Related Service Information power-on password at the supervisor password prompt. In this case, the Password , Start up , Network , and Initialize or Asset ID (for some models) icons cannot be selected. Note: The supervisor password and hard disk password cannot be replaced if they are forgotten.
Related Service Information Standby Mode: In standby mode, the following occurs: The LCD backlight turns off. The hard disk drive motor stops. The speaker is muted. Note: Standby mode in Windows 98 is called suspend mode in Windows 95. The computer enters standby mode when the Fn + F 3 keys are pressed.
Related Service Information independent of the operating system, so the computer might behave differently from your setting if you set the low-battery alarm. The computer chooses appropriately between your setting and the default setting. Note: The computer cannot enter suspend mode if it is attached to a docking station.
Related Service Information The following events cause the computer to enter hibernation mode: The Fn + F12 keys are pressed. The Hibernation button is selected in the Fuel-Gauge program. The power switch is turned off when hibernation mode is set to Hibernate by Power Switch in the Windows 98 Power Management Properties window.
Related Service Information Fn Key Combinations The following table shows the Fn key and function key combinations and their corresponding functions. The Fn key works independently from the operating system. The operating system obtains the status through the system management interface to control the system.
Checkout Guide Checkout Guide Use the following procedure as a guide for computer problems. Note: The diagnostic tests are intended to test only IBM products. Non-IBM products, prototype cards, or modified options can give false errors and invalid system responses.
Checkout Guide Symptoms (Verified) Go To Symptoms cannot be re-created (intermittent problems). Use the customer-reported symptoms and go to “Symptom-to-FRU Index” section. Audio Checkout ISA Audio Check Out 1. Go to the diagnostic menu by selecting Test in the Easy-Setup menu.
Checkout Guide 7. Insert the blank diskette when instructed and follow the instructions on the screen. 8. If the controller test detects an error, FRU code 10 appears. Replace the system board. 9. If the controller test runs without errors, the drive read/write tests start automatically.
Checkout Guide the keyboard test. See “Running the Diagnostics” on page 39 for details. Note: When the Fn key is pressed, a black square briefly appears. If the tests detect a keyboard problem, do the following one at a time to correct the problem.
Checkout Guide If an error appears: If the computer don't have the base memory slot, replace the system board. If the computer has the base memory slot, remove the DIMM installed in the base memory slot and go to step 2 on page 33. Then if an error appears, replace the system board.
Checkout Guide Port Replicator Checkout Use the following procedure to isolate a port replicator problem. The port replicator attaches to the system expansion connector at the rear of the computer: 1. Power off the computer. 2. Remove the failing devices from the port replicator.
Checkout Guide 3. Disconnect the AC Adapter and install the charged battery pack; then check that power is supplied by the battery pack. If you suspect a power problem, see the appropriate power suppl.
Checkout Guide pack. If the charge indicator or icon still does not turn on, replace the battery pack. If the charge indicator still does not turn on, replace either the system board or DC-DC card that the battery is connected to. Then reinstall the battery pack.
Checkout Guide Checking the Backup Battery: Do the following: 1. Power off the computer and unplug the AC Adapter from the computer. 2. Turn the computer upside down. 3. Remove the backup battery (see “Removal and Replacement” section of each model).
Running the Diagnostics 2. If FRU code 10 appears, replace the system board but do not replace the CPU card. Remove the CPU card from the old system board and install it to the new system board. 3. If FRU code 11 appears, reseat the CPU card. 4. Rerun the test to verify the fix.
Running the Diagnostics Use either the TrackPoint or the cursor-moving keys to interact with the tests. The Enter key works the same as selecting the OK icon to reply OK. 1. Press and hold F1 ; then power on the computer. Hold F1 down until the Easy-Setup menu appears.
Running the Diagnostics PC Card Slots Test The green LED on the PC test card turns on when the PC Card slot test is running. If the LED does not turn on, check that the card is installed correctly by reseating it. If the LED still does not turn on after the card is reseated, try using another slot for the test.
Running the Diagnostics USB ports of the docking station and click on USB-3 and USB-4 . Displaying the Error Log Diagnostic errors are printed on a printer attached to the parallel port when the error is detected. The error is also logged in the system memory.
Running the Diagnostics The device ID and error code indicate the detailed portion of the FRU that caused the error. If replacing a FRU does not correct the problem, see the device ID or error code from the previous failure. If they have changed, the cause might be that the new FRU is defective or that the FRU was incorrectly installed.
Running the Diagnostics FRU Codes: If an error is detected by the diagnostic tests, a four-digit FRU code is displayed. The FRU code indicates two suspected FRUs. Replace the FRU that is indicated by the two leftmost digits first; then replace the FRU that indicated by the two rightmost digits.
Running the Diagnostics If the problem persists after replacement of the FRUs, go to the “Undetermined Problems” section for each model. FRU Code FRU 50 1. Reseat the diskette drive (FDD-1) 2. Diskette drive (FDD-1) 51 1. Reseat the diskette drive (FDD-2) 2.
Running the Diagnostics 46.
Running the Diagnostics ThinkPad 600 This chapter includes the descriptions for the ThinkPad 600 series computer. Model-Unique Functions . . . . . . . . . . . . . . 49 Product Overview . . . . . . . . . . . . . . . 49 Status Indicators . . . . . . . .
Running the Diagnostics Model 600 . . . . . . . . . . . . . . . . . . 102 LCD FRU (TFT) ............... 1 0 5 Model 600E . . . . . . . . . . . . . . . . . 108 LCD FRU (TFT) ............... 1 1 1 Keyboard . . . . . . . . . . . . . . . . . . 112 Miscellaneous Parts .
Model-Unique Functions Model-Unique Functions Product Overview The following table is an overview of the system features of the ThinkPad 600 series: Feature Description Processor For 600: Intel Pe.
Model-Unique Functions Feature Description Video For 600: 13.0-inch, 64K colors 1024 × 768 pixel HPA color LCD 12.1-inch, 64K colors, 800 × 600 pixel TFT color LCD 13.3-inch, 64K colors, 1024 × 768 pixel TFT color LCD For 600E: 13.3-inch, 16M colors 1024 × 768 pixel TFT color LCD Diskette Drive (External) 1.
Model-Unique Functions Status Indicators The system status indicators show the current computer status in different colors (green and orange): Symbol Color Meaning .1/ Battery Green The battery is fully charged. Orange The battery is charging. Blinking orange The battery needs charging.
Symptom-to-FRU Index Symptom-to-FRU Index The symptom-to-FRU index lists the symptoms and errors and their possible causes. The most likely cause is listed first. Note: Perform the FRU replacement or actions in the sequence shown in the “FRU/Action in Sequence” column.
Symptom-to-FRU Index Symptom / Error FRU / Action in Sequence 111 (I/O parity.) 1. Go to “Memory Checkout” on page 33. 2. Expansion unit or port replicator. 3. System board 11XX 1101: Serial_A test failure. 1 . Serial device 2. Communication cable 3.
Symptom-to-FRU Index Symptom / Error FRU / Action in Sequence 183 (Incorrect password entered at the supervisor password prompt.) Have the user examine the password. 184 (Power-on password check sum error.) Reset the power-on password in Easy-Setup. 185 (The startup sequence is not valid.
Symptom-to-FRU Index Symptom / Error FRU / Action in Sequence 1XX 1 . System board 2XX 201: Memory data error. 202: Memory line error 00–15. 203: Memory line error 16–23. 205: Memory test failure on on-board memory. 221: ROM to RAM remap error. 1.
Symptom-to-FRU Index Symptom / Error FRU / Action in Sequence 808X 8081: PCMCIA presence test failure. (PCMCIA revision number also checked.) 8082: PCMCIA register test failure. 1. PC Card slot assembly 2. PCMCIA device 3. System board 860X (Pointing device error when TrackPoint is disabled.
Symptom-to-FRU Index Beep Symptoms No Beep Symptoms Symptom / Error FRU / Action in Sequence Continuous beeps. 1 . System board One beep and a blank, unreadable, or flashing LCD. 1. Reseat the LCD connector 2. LCD assembly 3. System board One beep, and the message “Unable to access boot source.
Symptom-to-FRU Index Audio-Related Symptoms Symptom / Error FRU / Action in Sequence In OS/2, DOS, or Windows multimedia programs, no sound comes from the computer. (Only system beeps are heard at power-on.) Check that the device driver is installed correctly.
Symptom-to-FRU Index Symptom / Error FRU / Action in Sequence The CD-ROM does not work. Make sure that: The computer power is turned on and a compact disc is in the CD-ROM drive. The CD-ROM drive connector is firmly connected to the computer. The CD-ROM drive tray is firmly closed.
Symptom-to-FRU Index Function-Related Symptoms Symptom / Error FRU / Action in Sequence The system does not suspend or resume when the LCD is closed or opened. 1. Go to “Suspend Mode” on page 26, and check that the computer can enter suspend mode.
Symptom-to-FRU Index Infrared-Related Symptoms Symptom / Error FRU / Action in Sequence Unable to communicate using the Infrared (IR) Port. 1. Make sure the setup for the IR is correct. Use the ThinkPad Configurations utility. 2. Make sure there are no fluorescent lights near the computer.
Symptom-to-FRU Index LCD-Related Symptoms Important The TFT LCD for the notebook computer contains over 2,359,296 thin-film transistors (TFTs). A small number of missing, discolored, or lighted dots (on all the time) is characteristic of TFT LCD technology, but excessive pixel problems can cause viewing concerns.
Symptom-to-FRU Index PC Card-Related Symptoms Symptom / Error FRU / Action in Sequence PC Card does not work in either the upper slot or the lower slot. Diagnostic error code: DEV 080 ERR 33 FRU 7210 1. Reseat the PCMCIA slot assembly . 2. PCMCIA slot assembly 3.
Symptom-to-FRU Index Power-Related Symptoms Symptom / Error FRU / Action in Sequence Power shuts down during operation. 1. Go to “Power Systems Checkout” on page 35. 2. Battery pack 3. Remove the battery pack and let it cool for 2 hours. 4. System board 5.
Symptom-to-FRU Index Verify that all attached devices are supported by the computer. Verify that the power supply being used at the time of the failure is operating correctly. (See “Power Systems Checkout” on page 35): 1. Power off the computer. 2.
FRU Removals and Replacements FRU Removals and Replacements This section contains information about removals and replacements: Do not damage any part.
FRU Removals and Replacements 1010 Backup Battery Caution The backup battery is a lithium battery and can cause a fire, an explosion, or severe burns. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water.
FRU Removals and Replacements 1020 DIMM T op View 1 1 2 68.
FRU Removals and Replacements 1030 Battery Pack 2 Unlock Lock 1 ThinkPad 600 69.
FRU Removals and Replacements 1040 Hard Disk Drive Attention Do not drop or apply any shock to the hard disk drive. The hard disk drive is sensitive to physical shock.
FRU Removals and Replacements 1050 UltraslimBay Device The artwork shows the FDD in the UltraslimBay, one of the CD-ROM drive, DVD Drive, battery pack, or HDD with adapter is available in the UltraslimBay. 1 2 When the security screw is installed In step .
FRU Removals and Replacements 1060 Keyboard Assembly Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) 1 2 3 4 5 Turn the computer right side up. Step Screw (Quantity) Color Torque .1/ M2.5 × 19.5 mm, nylon-coated (3) Black 4 kgcm .
FRU Removals and Replacements 6 Latch 7 8 Step Screw (Quantity) Color Torque .4/ M2.5 × 3 m m , nylon-coated (4) Yellow 4 kgcm .5/ M2.5 × 4.8 mm, nylon-coated (1) Black 4 kgcm ThinkPad 600 73.
FRU Removals and Replacements 1070 Keyboard Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) Note When you tear off the insulator in step .1/ , do it gently for it is reused. 2 1 4 3 2 Bottom view 4 Step Screw (Quantity) Color Torque .
FRU Removals and Replacements 1080 Speakers Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) Note In step .1/ , remove the insulator on the left speaker. 3 2 2 4 1 4 Bottom view Step Screw (Quantity) Color Torque .
FRU Removals and Replacements Note When replacing the right speaker, see the following artwork for its cable routing. 76.
FRU Removals and Replacements 1085 Speaker Cable Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) Note In step .1/ , remove the insulator on the left speaker. 3 2 1 4 Bottom view Step Screw (Quantity) Color Torque .
FRU Removals and Replacements 1090 LCD Assembly Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) Note For the LCD FRU removals and replacement, go to “2010 LCD Front Cover” on page 88.
FRU Removals and Replacements 1100 PC Card (PCMCIA) Slot Assembly Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) 1 3 2 Connector Step Screw (Quantity) Color Torque .1/ M2.0 × 9.
FRU Removals and Replacements 1110 Modem Card Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) 1 2 3 Connector Step Screw (Quantity) Color Torque .
FRU Removals and Replacements 1115 System Kit for RFID Note This FRU is only for 600E (2645-AAU) only. Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) .
FRU Removals and Replacements 1 2 3 Step Screw (Quantity) Color Torque .2/ M2.5 × 4.8 mm, nylon-coated (2) Black 4 kgcm 82.
FRU Removals and Replacements 1130 CPU Card and Fan Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) Step Screw (Quantity) Color Torque .1/ M2.0 × 9.5 mm, nylon-coated (1) Black 2.
FRU Removals and Replacements 6 5 Fan CPU card Note When you replace the CPU card, press only on the places indicated in the figure. Press both sides at the same time. Do not press only one side or any other part of the card. . Step Screw (Quantity) Color Torque .
FRU Removals and Replacements 1140 Guide Rail, Mic. Cable, or TV Out Card Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) Note TV out card is available for 600E model only. For 600 Step Screw (Quantity) Color Torque .
FRU Removals and Replacements For 600E Note Make sure the connector on the TV out card is firmly connected. Step Screw (Quantity) Color Torque .4/ M2.0 × 9.5 mm, nylon-coated (1) Black 2.5 kgcm .5/ M2.5 × 4.8 mm, nylon-coated (2) Black 4 kgcm .7/ M2.
FRU Removals and Replacements 1150 System Board Backup Battery (1010) DIMM (1020) Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Asse.
FRU Removals and Replacements 2010 LCD Front Cover Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) LCD Assembly (1090) Important The TFT LCD for the notebook computer contains over 2,359,296 thin-film transistors.
FRU Removals and Replacements 13.3-Inch TFT Panel Step Screw (Quantity) Color Torque .1/ M2.5 × 4.8 mm, nylon-coated (2) Black 4 kgcm .1/ M2.5 × 4.8 mm, nylon-coated (4) Black 4 kgcm ThinkPad 600 89.
FRU Removals and Replacements 13.0-Inch HPA Panel (600 Only) Step Screw (Quantity) Color Torque .1/ M2.5 × 4.8 mm, nylon-coating (2) Black 4 kgcm .1/ M2.
FRU Removals and Replacements 2020 LCD Hinges and Cables Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) LCD Assembly (1090) LCD Front Cover (2010) 12.1-Inch TFT Panel (600 Only) Step Screw (Quantity) Color Torque .
FRU Removals and Replacements 13.3-Inch TFT Panel Note When you replace the cables, make sure the cables are not caught by the LCD panel. 92.
FRU Removals and Replacements Step Screw (Quantity) Color Torque .1/ M2.5 × 4.8 mm, nylon-coated (1) Black 4 kgcm ThinkPad 600 93.
FRU Removals and Replacements 13.0-Inch HPA Panel (600 Only) Note When you replace the cables, make sure the cables are not caught by the LCD panel. Step Screw (Quantity) Color Torque .
FRU Removals and Replacements ThinkPad 600 95.
FRU Removals and Replacements 2030 Inverter Card Battery Pack (1030) Hard Disk Drive (1040) CD-ROM Drive or Diskette Drive (1050) Keyboard Assembly (1060) LCD Assembly (1090) LCD Front Cover (2010) LCD Hinges and Cables (2020) 12.
FRU Removals and Replacements 13.3-Inch TFT Panel Step Screw (Quantity) Color Torque .1/ M2.5 × 4.8 mm, nylon-coating (1) Black 4 kgcm ThinkPad 600 97.
FRU Removals and Replacements 13.0-Inch HPA Panel (600 Only) 1 2 3 Step Screw (Quantity) Color Torque .1/ M2.5 × 4.8 mm, nylon-coating (1) Black 4 kgcm 98.
Locations Locations Front View .1/ PC Card Slots .2/ Infrared Port .3/ Headphone Jack .4/ Microphone Jack .5/ External Diskette Drive Connector .6/ Video Out Connector .7/ LCD Latch .8/ Diskette/CD-ROM Drive .9/ TrackPoint .1ð/ Hard Disk Drive .11/ Fn Key .
Locations Bottom View .1/ Battery Pack .2/ DIMM Cover .3/ UltraslimBay Indicator Password Pads 100.
Locations Rear View .1/ LCD Latch .2/ Security Keyhole .3/ Modem Port .4/ Power Switch .5/ Reset Switch .6/ Universal Serial Connector .7/ AC Adapter Jack .8/ Serial Connector .9/ System Expansion Connector .1ð/ Parallel Connector .11/ External Monitor Connector .
Parts List Parts List Model 600 102.
Parts List Index System Unit 1 LCD Assembly (see “LCD FRU (TFT)” on page 105.) 2 Center Cover (see misc. parts) 3 Keyboard Bezel 05K7046 3 Keyboard Bezel - Korea 05K7048 4 Speaker and Microphone Cable (see misc. parts) 5 Keyboard (see “Keyboard” on page 112) 6 Holder for CPU Card (see misc.
Parts List Index System Unit Telephone Cable 05K2707 External FDD Cover 05K6187 Blank Bay 05K4842 CD-ROM Carrying Case 05K4843 AC Adapter (56 W) 2-pin 11J8974 2-pin 02K6497 3-pin 02K7007 3-pin 02K7011.
Parts List LCD FRU (TFT) 12.1-Inch TFT Index System Unit 1 Cover Set 05K5255 2 LCD Panel 05K9335 3 Inverter Card 10L0931 4 LCD Cables 05K2655 5 Hinges 05K5257 ThinkPad 600 105.
Parts List 13.3-Inch TFT Index System Unit 1 Cover Set 05K4833 Cover Set (Korea) 05K5256 2 LCD Panel (DBU) 05K9428 LCD Panel (LG) 05K9367 3 Hinges 05K4835 4 LCD Cables 22L1891 5 Inverter Card 10L1719 .
Parts List 13.0-Inch HPA Index System Unit 1 Cover Set 05K4832 2 LCD Panel 05K9337 3 Hinges 05K4834 4 LCD Cables 05K2645 5 Inverter Card 05K3470 ThinkPad 600 107.
Parts List Model 600E 108.
Parts List Index System Unit 1 LCD Assembly (see “LCD FRU (TFT)” on page 111) 2 Center Cover (see misc. parts) 3 Keyboard Bezel 05K5856 4 Speaker and Microphone Cable 2 (see misc. parts) 5 Keyboard (see “Keyboard” on page 112) 6 Holder for CPU Card (see misc.
Parts List Index System Unit Telephone Cable 05K2707 Video Cable 05K2821 External FDD Cover 05K6187 Blank Bay 05K4842 CD-ROM Carrying Case 05K4843 AC Adapter (56 W) 2-pin 02K6554 2-pin 02K6556 3-pin 0.
Parts List LCD FRU (TFT) 13.3-Inch TFT Index System Unit 1 Cover Set 05K4833 2 LCD Panel (DBU) 05K9398 LCD Panel (HITACHI) 05K9466 LCD Panel (LG) 05K9519 LCD Panel (Samsung) 05K9546 3 Hinges 05K4835 4.
Parts List Keyboard Arabic 02K4837 Belgian 02K4801 Canadian French 02K4788 Czech 02K4839 Danish 02K4794 Dutch 02K4791 French 02K4790 German 02K4789 Greek 02K4843 Hungary 02K4841 Hebrew 02K4835 Italian.
Parts List Option Parts List 24X-10X IDE CD-ROM Drive 12J2471 20X-8X CD-ROM Drive 1969010 20X-8X Stereo CD-ROM Drive 1969011 56 AC Adapter (2-pin) 83H6739 4.
Parts List Modem Kit Australia 22L1885 Austria 22L1863 Belgium 22L1861 Brazil 22L1871 Cyprus 22L1887 Denmark 22L1879 France 22L1862 Germany 22L1877 Indonesia 22L1872 Ireland 22L1896 Italy 22L1865 Isra.
Parts List Common Parts List Tools Tri-Connector Wrap Plug 72X8546 PC Test Card 35G4703 Audio Wrap Cable 66G5180 USB Parallel Test Cable 05K2580 Screwdriver Kit 95F3598 Torque Screwdriver 05K4695 5mm Socket Wrench 05K4694 Screwdriver 27L8126 ThinkPad Hardware Maintenance Diskette Version 1.
Parts List Power Cords: IBM power cords for a specific country are usually available only in that country: For 2-pin power cords: For 3-pin power cords: P/N Used in These Countries 13H5273 Japan P/N U.
Notices Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used.
IBM Part Number: 09N1033 Printed in U.S.A. S1ðL-9619-ð3.
Een belangrijk punt na aankoop van elk apparaat IBM 600/600E (2645) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen IBM 600/600E (2645) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens IBM 600/600E (2645) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding IBM 600/600E (2645) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over IBM 600/600E (2645) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van IBM 600/600E (2645) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de IBM 600/600E (2645) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met IBM 600/600E (2645) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
