Gebruiksaanwijzing /service van het product 6736-HB0 van de fabrikant IBM
Ga naar pagina of 30
L200p User’s Guide Color Monitor English.
ii i First Edition (February / 2003) Note : For important information, refer to the Monitor Safety and Warranty manual that comes with this monitor..
ENGLISH 1 Safety (Read first) .......................................................................................................2 Setting up the monitor .............................................................................................
2 í í í T710_E_update.fm Page 2 Monday, July 8, 2002 11:44 AM.
ENGLISH 3 Setting up the monitor Handling Instructions Handling Instructions 1. Lift the monitor by placing your hands where indicated below. 2. Before using your monitor for the first time, remove the clear protective film from the front of the screen.
4 i This section gives advice on what you should consider before you set up your monitor. W orkplace Preparation Height Position the monitor so that the top of the screen is slightly below your eye level when you sit at your workstation.
ENGLISH 5 5 i With the IBM Flat Panel Monitor, you can adjust its position in various ways for maximum comfort. Viewing Angle You can tilt the screen forward and backward as shown below in Figure A. Swivel You can swivel the screen to the left or the right as shown below in Figure A.
6 Be sure to turn off the power before you perform any maintenance on the monitor. Clean your monitor as follows: • Gently wipe the covers and the screen with a soft cloth. Do not use solvents or abrasives. • Remove finger marks and grease with a damp cloth and mild detergent.
A ENGLISH 7 Connecting your Monitor 1. Turn off your computer and all attached devices. Next, unplug the power cord(s) to your computer and all attached devices. 2. Connect the signal cable. The analog signal cable is already connected to your monitor.
8 1. Switch on your computer. 2. Switch on the monitor power source by pushing the power switch on side rear panel of the monitor.(See Figure B) 3. Switch on your monitor by pushing and releasing the power switch marked [ ] at the front of the bezel. [To switch off your monitor, push and release the power switch again.
ENGLISH 9 To install the device driver in Microsoft ® Windows ® 95 or Windows 98, do the following: You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows 95 or Windows 98. Note: 1. Turn off the computer and all attached devices.
10 To install the device driver in Microsoft Windows 2000 Professional or Microsoft Windows Millennium Edition (Me), do the following: You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows 2000 or Windows Me.
ENGLISH 11 To install the device driver in Windows XP, do the following: You must download files from the User’s Guide and Installation Files CD to use the Plug and Play feature in Windows XP. Note: 1. Turn off the computer and all attached devices.
12 For digital input, image setup is not required. When you first use your monitor, you must perform Auto Setup for analog input. If you are using digital input, continue with the instructions on page 6. This procedure sets up your monitor to process the video signals from your computer without image discoloration or smearing.
ENGLISH 13 To set up the monitor automatically in DOS, do the following. 1. Turn on the monitor first; then turn on the computer. If the message CHECK SIGNAL CABLE is displayed, or if nothing is displayed, check: • that the video interface cable is not connected properly.
6. When the dot pattern appears, press the button at the bottom of the monitor. This activates the I MAGE S ETUP procedure, which will optimize the display settings with the provided dot-patterns. The screen will momentarily turn black while auto adjustment proceeds.
Normally, you can complete the setup procedure using Automatic Image S etup; however, if your screen image is still distorted after you perform Image S etup or the setup CD does not run on your system, perform M ANUAL I MAGE S ETUP . To manually adjust the image setting, do the following: 1.
16 Adjusting Y our LCD Monitor User controls USER CONTROL FEATURES i The image is already optimized for many display modes, however the user controls can be used to adjust the image to your liking. i The settings are saved after adjustment and when exiting the OSD and will be effective thereafter.
ENGLISH 17 The settings adjustable with the user controls are viewed through the On - Screen Display (OSD). Press the enter button [ ] to display the main OSD menu. Initial appearance of OSD On-screen display (OSD) controls i The LCD monitor needs time to become thermally stable the first time you turn it on each day.
18 OSD Icon Select the COLOR MODE you find most comfortable or fine tune the colors using the CUSTOM menu, if necessary. This function displays the image in its original size or enlarged size so as to fit in the full screen of the LCD panel.
ENGLISH 19 Use this button to make the analog or digital connector active. This feature is used when two computers are connected to the monitor. The default setting is analog. Input Signal • English • Fran ç ais • Italiano • Deutsch • Espa ñ ol OSD Icon Display the detailed information of mode, model name and microcode.
20 i If your computer has previously been used with a CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have reconfigured the computer, preferably to 1600 x 1200 at 60Hz.
ENGLISH 21 To benefit from power management, the monitor must be used in conjunction with a computer that implements the Video Electronics Standards Association (VESA) Display Power Management Signaling (DPMS) Standard.
22 T roubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM, try the suggested actions that are appropriate to your problem. Problem No power to monitor. Possible Cause Suggested Action Reference Brightness and Contrast may be too low.
ENGLISH 23 i For image problems, you may want to run I MAGE S ETUP again before consulting to this section. In most cases, I MAGE SETUP can fix the problems. See Autometic Image Setup for the computer on page 12 for details. Problem Possible Cause Suggested Action Reference There are noises in the video signal The color setting may be incorrect.
24 If you are unable to correct the problem yourself, you may seek further help as follows: Call the IBM HelpCenter ® . In the U.S.A and Puerto Rico call 1-800-772-2227 In Canada(Toronto Only) call 416-383-3344 In Canada(all other) call 1-800-565-3344 In other countries contact your dealer, retailer, or other IBM authorized Servicer.
ENGLISH 25 This color monitor (Type-model 6736-HB0) uses a 20.1-inch TFT LCD. i Power consumption figures are for the monitor and the power supply combined. Weight 8.35 kg (18.41 lbs) 20.1-inch (510.54 mm) 306 mm (12.05 inch) 408 mm (16.04 inch) 0.255 mm (H) x 0.
FRU Monitor FRU Stand FRU Video Cable Hybrid Hybrid Analog SB SB Black 6736-HB0 6736-HB0 6736-HB0 26 Service Information The following parts are for use by IBM service, or IBM authorized dealers, to support the customer warranty. Parts are for service use only.
ENGLISH 27 Notices and T rademarks This section contains information on notices and trademarks. Notices IBM may not offer the products, services, or feature discussed in this document in all countries. Consult your local IBM representative for information on the products and services currently available in your area.
28 Trademarks The following terms, used in this publication, are trademarks or service marks of the IBM Corporation in the United States, other countries, or both; HelpCenter IBM E NERGY S TAR ® is a U.
Een belangrijk punt na aankoop van elk apparaat IBM 6736-HB0 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen IBM 6736-HB0 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens IBM 6736-HB0 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding IBM 6736-HB0 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over IBM 6736-HB0 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van IBM 6736-HB0 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de IBM 6736-HB0 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met IBM 6736-HB0 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
