Gebruiksaanwijzing /service van het product IC-M2A van de fabrikant Icom
Ga naar pagina of 32
INSTRUCTION MANUAL iM2A VHF MARINE TRANSCEIVER This device complies with Part 15 of the FCC Rules. Operation is sub- ject to the follow two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only dur- ing the course of employment by individuals aware of the haz- ards, and the ways to minimize such hazards.
ii IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. ❍ USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. “MA YDA Y MA YDA Y MA YDA Y .” 2. “THIS IS ..........
iii FOREWORD Thank you for purchasing this Icom product. The IC-M2A VHF MARINE TRANSCEIVER is designed and built with Icom’ s su- perior technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation.
CAUTIONS R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. R W ARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body , especially the face or eyes, while transmitting.
v SAFETY TRAINING INFORMA TION ................................... i IN CASE OF EMERGENCY ............................................... ii RECOMMENDA TION .......................................................... ii FOREWORD .......................
1 1 OPERA TING RULES D Priorities • Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy . Safety and distress calls take priority over all others. • Y ou must monitor Channel 16 when you are not operating on another channel.
2 2 P ANEL DESCRIPTION q CHANNEL/WEA THER CHANNEL SWITCH [CH/WX• U/I/C ] • Selects and toggles the regular channels and weather channel when pushed. (pgs. 6, 7) • Selects one of 3 regular channels in se- quence when pushed for 1 sec. (p. 6) - International, U.
3 2 P ANEL DESCRIPTION CAUTION!: When attaching or releasing a battery pack, make sure the rubber seal is set in the groove of the battery pack/case correctly . If the seal is not neatly in the groove it may be damaged when attaching the battery pack/case.
4 2 P ANEL DESCRIPTION ■ Function display q TRANSMIT INDICA T OR (p. 8) Appears while transmitting. w BUSY INDICA T OR (p. 8) Appears when receiving a signal or when the squelch opens. e T AG CHANNEL INDICA TOR (p. 12) Appears when a tag channel is selected.
5 2 P ANEL DESCRIPTION o DUAL W A TCH/TRI-W A TCH INDICA TORS (p. 10) “ DUAL ” appears during dualwatch; “ TRI ” appears during tri-watch. !0 SUB CHANNEL READOUT • Indicates Channel 16 during priority scan. • Indicates Channel 16 during dualwatch or tri-watch.
D U.S.A., International and Canadian channels There are 57 U.S.A., 57 International and 61 Canadian chan- nels. These channel groups may be speci fi ed for the operat- ing area. q Push [CH/WX] to select a regular channel. - If a weather channel appears, push [CH/WX] again.
7 3 BASIC OPERA TION D W eather channels There are 10 weather channels. These are used for monitor- ing weather channels from the NOAA (National Oceano- graphic and Atmospheric Administration) broadcasts. The IC-M2A can detect a weather alert tone on the selected weather channel while scanning.
8 q Rotate [OFF/VOL] clockwise to turn power ON. - Use the squelch function to mute any audio noise if necessary . Refer to the previous page for details. w Push* [SQL • MONI ] for 1 sec., and rotate volume to set audio output level. *According to Monitor action selection in SET mode (p.
9 3 BASIC OPERA TION ■ Call channel programming The call channel switch is used to select Channel 9 by de- fault, however , you can program your most often-used chan- nels in each channel group for quick recall. q Push [CH/WX • U/I/C ] for 1 sec. to select the desired channel group (USA, INT , CAN) to be programmed.
10 4 DUAL W A TCH/TRI-W A TCH ■ Description Dualwatch monitors Channel 16 while you are receiving an- other channel; tri-watch monitors Channel 16 and the call channel while receiving another channel.
11 5 SCAN OPERA TION ■ Scan types Scanning is an ef fi cient way to locate signals quickly over a wide frequency range. The transceiver has a priority scan and a normal scan. In addition, weather alert functions are available for standby convenience.
12 5 SCAN OPERA TION ■ Setting tag channels For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Chan- nels set as non-tag channels will be skipped during scanning. T ag channels can be assigned to each channel group (USA, INT , CAN) independently .
13 6 SET MODE Weather alert function OFF (default) Weather alert function ON ■ SET mode programming SET mode is used to change the conditions of 12 transceiver functions: beep tone, weather alert, s.
D Priority scan function “ Pr ” The transceiver has 2 scan types. Normal scan and priority scan. Normal scan searches all tag channels in the selected channel group. Priority scan searches all tag channels in se- quence while monitoring Channel 16.
15 6 SET MODE D Automatic backlighting “ bL ” This function is convenient for nighttime operation. The auto- matic backlighting turns the backlighting ON when pushing any key except for [PTT]. • The backlighting is automatically turned OFF after 5 sec.
16 6 SET MODE D Battery voltage indicator “ bt ” This function contains display or non-display settings of the voltage of the connected battery pack when the power is ON. • The voltage of the connected battery pack is displayed for 2 sec. after power is turned ON.
17 7 BA TTER Y CHARGING ■ Battery charging Prior to using the transceiver for the fi rst time, the Ni-Cd bat- teries must be fully charged for optimum life and operation. • Recommended temperature range for charging: +50 ° F to +104 ° F (+10 ° C to +40 ° C) • Use the supplied AC adapter (BC-147A/E or BM-95V) only .
18 7 BA TTERY CHARGING ■ Installing batteries in the battery case (Not supplied with some versions) When using a battery case attached to the transceiver , install 6 × AA(R6) size alkaline batteries as illustrated below . q Remove the battery case from the transceiver .
19 7 BA TTERY CHARGING D Rapid charging with the BC-121N+AD-103 The optional BC-121N allows up to 6 battery packs to be charged simultaneously . The following are additionally re- quired. • Six AD-103. • An AC adapter (BC-124) or the DC power cable (OPC-656).
20 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Supplied accessories The following accessories are supplied: Qty . q Flexible antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 w Swivel belt clip . . . . . . . . . . . . . . . . . .
e Insert the stopper to the back of the belt clip. Once the transceiver is locked in place, it will swivel 360 de- grees. 21 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Swivel belt clip T o attach: q Slide the stopper into the plastic loop on the back of the transceiver .
22 8 SUPPLIED ACCESSORIES AND A TT ACHMENTS T o remove: q T urn the transceiver upside down, and then lift to release the transceiver from the belt clip. w Release the belt clip. e Push the top of the stopper towards the transceiver and out at the same time, then push it downwards and free of the plastic loop.
23 9 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION . REF . No sound comes from the speaker . • Squelch level is too deep. • V olume level is too low . • Speaker has been exposed to water . p. 7 p. 8 — • Set squelch to the threshold point. • Set [OFF/VOL] to a suitable level.
24 CHANNEL LIST 10 Channel number USA CAN T ransmit Receive Frequency (MHz) INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT WX channel Frequency (MHz) T ransmit Receive 01 156.
■ Speci fi cations • GENERAL Frequency coverage : T ransmit 156.025 – 157.425 MHz Receive 156.050 – 163.275 MHz Mode : FM (16K0G3E) Channel spacing : 25 kHz Current drain (at 7.
Count on us! 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan A-61 13H-1EX- q Printed in Japan © 2001, 2002 Icom Inc..
Een belangrijk punt na aankoop van elk apparaat Icom IC-M2A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Icom IC-M2A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Icom IC-M2A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Icom IC-M2A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Icom IC-M2A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Icom IC-M2A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Icom IC-M2A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Icom IC-M2A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
