Gebruiksaanwijzing /service van het product IC-M88 van de fabrikant Icom
Ga naar pagina of 40
INSTRUCTION MANUAL iM88 VHF MARINE TRANSCEIVER This device complies with Part 15 of the FCC Rules. Operation is sub- ject to the follow two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SAFETY TRAINING INFORMA TION Y our Icom radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the haz- ards, and the ways to minimize such hazards.
ii IN CASE OF EMERGENCY If your vessel requires assistance, contact other vessels and the Coast Guard by sending a distress call on Channel 16. ❍ USING CHANNEL 16 DISTRESS CALL PROCEDURE 1. “MA YDA Y MA YDA Y MA YDA Y .” 2. “THIS IS ..........
iii FOREWORD Thank you for purchasing this Icom product. The IC-M88 VHF MARINE TRANSCEIVER is designed and built with Icom’s state of the art technology and craftsmanship. With proper care this product should provide you with years of trouble-free operation.
PRECAUTION R W ARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. R W ARNING! NEVER hold the transceiver so that the antenna is very close to, or touching exposed parts of the body , especially the face or eyes, while transmitting.
v SAFETY TRAINING INFORMA TION ................................... i IN CASE OF EMERGENCY ............................................... ii RECOMMENDA TION .......................................................... ii FOREWORD .......................
1 1 OPERA TING RULES D Priorities • Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy . Safety and distress calls take priority over all others. • Y ou must monitor Channel 16 when you are not operating on another channel.
2 2 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Supplied accessories The following accessories are supplied: Qty . • Swivel belt clip . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 • Stopper for the swivel belt clip . . . . . . . . . . . . .
3 2 SUPPLIED ACCESSORIES AND A TT ACHMENTS D Flexible antenna Connect the supplied fl exible an- tenna to the antenna connector . CAUTION: Transmitting with- out an antenna may damage the transceiver . NEVER HOLD by the antenna when carrying the transceiver .
4 3 P ANEL DESCRIPTION q VOLUME CONTROL [VOL] T urns power ON and adjusts the audio level. w ANTENNA CONNECTOR (p. 3) Connects the supplied antenna. e SPEAKER-MICROPHONE CONNECTOR [SP MIC] (p.27) Connects the optional speaker-microphone. r SCAN [SCN•DUAL] (pgs.
5 3 P ANEL DESCRIPTION w q Battery pack Battery release button ï BA TTERY P ACK RELEASE BUTTON T o release the battery pack: Push the battery release button in the direction of the arrow ( q ) as shown below .
6 3 P ANEL DESCRIPTION ■ Function display !5 !6 !7 q w e r t y u i o !0 !1 !2 !3 !4 q TRANSMIT INDICA TOR (p. 10) Appears while transmitting. w BUSY INDICA TOR (p. 10) Appears when receiving a signal or when the squelch opens. “” blinks while monitoring.
7 3 P ANEL DESCRIPTION i WEA THER CHANNEL/WEA THER ALERT INDICA TORS • “ WX ” appears when the weather channel group is se- lected. (p. 9) • “ AL T ” appears while the weather alert function is acti- vated. o BELL INDICA TOR Blinks when an alert tone is received.
8 4 BASIC OPERA TION D Channel 9 (Call channel) Channel 9 is the leisure-use call channel. Each regular chan- nel group has separate call channels. In addition, each call channel is monitored during tri-watch. The call channels can be reprogrammed (p.
9 4 BASIC OPERA TION D Weather channels (A vailable for USA version only) There are 10 weather channels. They are used for monitoring weather channels from the NOAA (National Oceanographic and Atmospheric Administration) broadcasts. q Push [CH/WX • U/I/C/L ] to select the weather channel group.
10 4 BASIC OPERA TION q Rotate [VOL] clockwise to turn power ON. w Use the squelch function to mute any audio noise if necessary . After pushing the [SQL] for 1 sec., the squelch function is cut off until [SQL] is released. (default) e Push [SQL] for 1 sec.
11 4 BASIC OPERA TION ■ Adjusting the squelch level The IC-M88 has a squelch even though there is no control knob for it. In order to receive signals properly , as well as for the scan to function effectively , the squelch must be adjusted to the proper level.
12 4 BASIC OPERA TION ■ Call channel programming The call channel key is used to select Channel 9 by default, however , you can program your most often-used channels in each channel group for quick recall. q Push [CH/WX • U/I/C/L ] for 1 sec. several times to select the de- sired channel group (USA, INT , CAN) to be programmed.
13 5 SCAN OPERA TION ■ Scan types Scanning is an ef fi cient way to locate signals quickly over a wide frequency range. The transceiver has priority scan and normal scan. In addition, the weather alert and auto scan function is avail- able for standby convenience.
14 5 SCAN OPERA TION ■ Setting tag channels For more efficient scanning, add desired channels as tag channels or clear tag channels for unwanted channels. Non- tag channels will be skipped during scanning. T ag channels can be assigned to each channel group (USA, INT , CAN) inde- pendently .
15 6 DUAL W A TCH/TRI-W A TCH ■ Description Dualwatch monitors Channel 16 while you are receiving an- other channel; tri-watch monitors Channel 16 and the call channel while receiving another channel. ■ Operation q Select the desired operating channel.
16 7 LAND CHANNEL OPERA TION ■ LAND Channel Group A max. of 22 free LAND mobile channels (allocated 146.000 to 174.000 MHz) can be programmed into the LAND channel group for simple communication with LMR transceivers in the VHF band. Moreover , any of the marine channels in the USA, INT and CAN channel groups can be programmed.
17 8 SET MODE ■ SET mode programming SET mode is used to change the condition of 13 transceiver functions: beep tone function, weather alert function, priority scan function, scan resume timer , aut.
18 8 SET MODE ■ SET mode items D Beep tone function “ bP ” Y ou can select silent operation by turning the beep tones OFF , or you can have 2 types of con fi rmation beeps sound at the push of a switch. When ON is selected, a fi xed beep (Pi) sounds and when US is selected, the preset beeps (e.
19 8 SET MODE D Auto scan function “ AS ” The Auto scan function starts the desired scan automatically when no signal is received, or no operation is performed for 30 sec. D Dual/T ri-watch function “ dt ” This item selects dual or tri-watch as desired.
20 8 SET MODE D LCD contrast selection “ LC ” The contrast of the LCD can be adjusted from 4 levels. • 1 (bright) – 4 (dark); 3 (default) D Auto power save function “ PS ” The auto power save function reduces current drain by deac- tivating the receiver circuit for preset intervals.
21 8 SET MODE D Battery voltage indicator “ bt ” This function contains display or non-display settings of the voltage of the connected battery pack when the power is ON. • The voltage of the connected battery pack is displayed for 2 sec. after power is turned ON.
22 9 BA TTER Y CHARGING ■ Battery charging Prior to using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation.
23 9 BA TTERY CHARGING ï Charging connections q Attach the BC-152 to a fl at surface, such as desk or cabin, etc., if desired. w Connect the AC adapter (BC-147A/E) as shown below . e Insert the battery pack with/without the transceiver into the charger .
24 9 BA TTERY CHARGING ■ Optional BP-226 battery case When using the optional battery case attached to the trans- ceiver , install 5 × AA (R6) size alkaline batteries as illustrated at right. The IC-M88 meets JIS waterproof speci fi cation grade 7.
25 9 BA TTERY CHARGING ■ AD-100 installation Install the AD-100 desktop charger adapter into the holder space of the BC-1 19N/121N. Screws supplied with the charger adapter Desktop charger adapter C.
26 D Rapid charging with the BC-121N+AD-100 The optional BC-121N allows up to 6 battery packs to be charged simultaneously . The following are additionally re- quired. • Six AD-100 charger adapters • An AC adapter (BC-124) or the DC power cable OPC-656, supplied with the BC-121N.
27 10 SPEAKER-MICROPHONE ■ HM-138 Description NEVER immerse the connector in water . If the connector be- comes wet, be sure to dry it BEFORE attaching it to the trans- ceiver . NOTE: The microphone is located at the top of the speaker-microphone, as shown in the diagram above.
28 11 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION . REF . No sound from speaker . • Squelch level is too deep. • V olume level is too low . • Speaker has been exposed to water . p. 1 1 p. 10 — • Set squelch to the threshold point. • Set [VOL] to a suitable level.
29 12 VHF MARINE CHANNEL LIST Channel number USA CAN T ransmit Receive Frequency (MHz) INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT Channel number Frequency (MHz) USA CAN T ransmit Receive INT WX channel Frequency (MHz) T ransmit Receive 01 156.
30 13 SPECIFICA TIONS GENERAL • Frequency coverage Marine TX : 156.025 – 157.425 MHz RX : 156.050 – 163.275 MHz LMR TX/RX : 146.000 – 174.000 MHz • Mode Marine : 16K0G3E (Wide) LMR : 16K0F3E (Wide)/8K50F3E (Narrow) • Channel spacing : 25 kHz (Wide) 12.
Important operating instructions are summed up in this and the following page for your simple reference. By cutting along the line and folding on the dotted line, it will become a card sized operating guide which can easily be carried in a card case or wallet, etc.
■ DUAL/TRI-W A TCH (p. 15) q w Push [ Y ]/[ Z ] to select the desired channel. Push [SCN • DU AL] for 1 sec. to star t dualwatch or tri-watch de - pending on SET mode setting (p . 19). ■ T AG CHANNELS (p. 14) q w Push [ Y ]/[ Z ] to select the desired channel.
33 15 OPTIONS • BP-226 BA TTERY CASE Battery case for 5 × AA (R6) alkaline cells. • BP-227 L i - I on BA TTERY P ACK 7.2 V/1700 mAh Li-Ion battery pack. The same as supplied with the transceiver . BP-227 must be charged with the sup- plied BC-152 or the optional BC-1 19N/121N.
INST Count on us! 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0002 Japan A-6214H-1EX- w Printed in Japan © 2002 Icom Inc. IC-M88-2.qxd 02.11.22 3:25 PM Page 34 (1,1).
Een belangrijk punt na aankoop van elk apparaat Icom IC-M88 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Icom IC-M88 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Icom IC-M88 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Icom IC-M88 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Icom IC-M88 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Icom IC-M88 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Icom IC-M88 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Icom IC-M88 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
