Gebruiksaanwijzing /service van het product 130T van de fabrikant Intel
Ga naar pagina of 18
Intel Express 130T Standalone Hub User Guide.
Y ear 2000 Capable An Intel product, when used in accordance with its associated documentation, is "Y ear 2000 Capable" when, upon installation, it accurately stores, displays, processes, pr.
1 23 45 Blink = Activity Orange = Autodisab led Speed 100 10 1 Quic k Star t Install the hub Place the hub on a shelf or table, then plug the power supply into the hub and into a power outlet. Use only the power supply provided with the unit. Leave at least 3 inches (7.
2 Frequently asked questions Does each port operate at 10Mbps or 100Mbps? Yes. Each port on the Express 130T Standalone Hub is capable of 10Mbps or 100Mbps half-duplex operation. Do I have to set a port’s speed? No. Ports on the Express 130T Standalone Hub automatically detect and match the speed of an attached device.
3 Over vie w The Intel Express 130T Standalone Hub is an 8-port hub that operates at 10 or 100Mbps. • All ports on the hub are capable of 10 or 100Mbps half-duplex operation. • Each port on the hub automatically detects the highest possible speed of an attached device (either 10Mbps or 100Mbps) and matches that speed.
4 Connection Guidelines You can connect the Intel Express 130T Standalone Hub to various PCs, switches, routers, servers, and print servers running at either 10Mbps or 100Mbps. Each port on the Express 130T Standalone Hub automatically matches the highest possible speed of an attached device.
5 LED Indicators The LEDs on the front of the hub indicate the status of each port as well as the overall condition of the hub. LED Color Meaning Power Green Hub is receiving power. Traffic % Green Utilization is low to medium (3-12 percent). Orange Utilization is medium to high (25-50+ percent).
6 You can connect the Express 130T Standalone Hub to a 100Mbps hub that supports daisy-chaining. Connecting to Hubs and Switches Connecting to another 130T hub Using no more than 5 meters of CAT 5 UTP cable, connect the Daisy- chain port on one hub to any port except the Daisy-chain port on the other hub.
7 Do not connect the Express 130T Standalone Hub to a 100Base-T Class I hub, such as the Express 10/100 Stackable Hub. Don’t connect the Express 130T Standalone Hub to a 100Base-T Class I hub.
8 Connecting to a switch Connecting hubs to a switch, such as the Intel Express 510T Switch, allows you to extend your network topology. The cable length between the Express 130T Standalone Hub and the switch must not exceed 100 meters. If you’re connecting to a 10Mbps switch, make sure you use no more than 100 meters of CAT 3, 4, or 5 UTP.
9 T r oub leshooting Symptoms and solutions Most problems with the Express 130T Standalone Hub are caused by incorrect cabling. If you have problems connecting devices, check your cabling first. A port LED is orange. This means the hub has autodisabled (partitioned) a port.
10 Cabling Requirements Straight-through vs. crosso ver cables Ports 1-8 on the Express 130T Standalone Hub are wired MDI-X (indicated by the ‘x’ next to the port number), which allows you to use a straight-through cable when connecting to a PC or server (network adapter cards are wired MDI).
11 T esting a cable Here’s an easy way to test the link integrity of a cable: 1 Plug one end of the cable into the Daisy-chain port. 2 Plug the other end of the cable into port 2X. 3 Check port 1 and port 2 Speed LEDs on the front of the unit. If these ports are lit, you have a functioning straight-through cable.
12 Limited Hardwar e W arranty Intel warrants to the original owner that the hardware product deliv ered in this package will be free from defects in material and workmanship for three (3) years follo.
13 Limited Hardwar e W arranty (Europe only) Intel warrants to the original owner that the hardware product deliv ered in this package will be free from defects in material and workmanship for three (.
14 Regulatory information Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
15 WARNUNG Das System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der entwickelt. Der Standort sollte: · sauber und staubfrei sein (Hausstaub ausgenommen); · gut gelüftet und.
World Wide Web & Internet FTP Intel BBS Access Intel’s World Wide Web home page Use Intel’s Bulletin Board. Dial in by or download information using modem at 8-N-1, and up to 14.
Een belangrijk punt na aankoop van elk apparaat Intel 130T (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Intel 130T heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Intel 130T vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Intel 130T leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Intel 130T krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Intel 130T bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Intel 130T kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Intel 130T . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
