Gebruiksaanwijzing /service van het product NuPRO-850 van de fabrikant Intel
Ga naar pagina of 50
Recycled Paper NuPRO-850 Full-Size ePCI-X System Host Board Intel® Pentium® 4 processor User’s Manual.
.
© Copyright 2004 ADLINK Technology Inc. All Rights Reserved. Manual Rev. 1.00: June 18, 2004 Part Number: 50-13045-100 The information in this document is s ubject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.
Getting Service from ADLINK Customer Satisfaction is top priority for ADLINK Technology Inc. If y ou need any help or service, please contact us. A DLINK TECHNOLOGY INC. Web S ite http ://www.a dlin ktec h.co m Sales & Service Service@adlinktech.com TEL +886-2-82265877 FAX +886-2-82265717 Address 9F, No.
List of Tables and Figures • i Table of Contents Chapter 1 In troduction .................................................................. 1 1.1 Unpacking Che cklist ........................................................................ 2 1.2 Features .
ii • How to Use This Guide Ho w to Use T his Guide This manual is designed to help user s configure the NuPRO-850 Full-Size ePCI-X System Host Board w ith Dual Xeon CPU. It is divided into five chapters. Chapter 1 Introduction Gives an overview of the pr oduct features, applications, and specifications.
Introduction • 1 1 Intr oduction The NuPRO-850 is a full-size ePCI-X System Host Board (SHB) based on the Intel® Pentium® 4 processor and 875P Memory Controller Hub / 6300ESB I/O Controller Hub chipset. It features AG P4X/8X VGA, Serial ATA I/F, Gigabit Ethernet, and USB v2.
2 • Introduction 1.1 Unpacking Checklist Check the shipping carton for any dam age. If the shipping carton and contents are damaged, notify the dealer for a replacement. Retain the shipping carton and packing materials for inspection by the dealer. Obtain authorization before returning any product to ADLINK.
Introduction • 3 1.2 Features • PICMG 1.2 Rev 1.0 Embedded PCI- X Specification compliant. • PCI Local Bus Specification, Rev 2.2 compliant. • Single Intel® Pentium® 4 processor with 1MB L2 cache, 533/800MHz FSB, Hyper-Threading Technology. • Four 184-pin DIMM sockets, support single/dual channel DDR DIMM.
4 • Introduction 1.3 Functional Blocks and Main Board The following topics provide an overview of the NuPRO-850 main features as shown in the functional block diagr am below and also the main board.
Introduction • 5 Main Board Drawing Figure 2: Main Board Draw ing.
6 • Introduction 1.3.1 Intel® Pentium® 4 Processor The Intel® Pentium® 4 processor is based on Intel® NetBurst® microarchitecture and built w ith In tel®'s 0.13-micron and 90nm manufacturing process and featuring Hyper-Threading technology, a 1MB level tw o-cache size.
Introduction • 7 1.3.7 Softw are The NuPRO-850 is compatible with all major PC operating systems. ADLINK provides support, which may include additi onal drivers for ADLINK peripherals. Software device drivers for the NuPR O-850 may be found in the ADLINK CD.
8 • Introduction 1.4 Specifications Compliant Specifications • PICMG 1.2 Rev 1.0 Embedded PCI- X Specification compliant. • PCI Local Bus Specification, Rev 2.2 compliant. Form Factor • Standard Full-Size ePCI-X System Host Board, 338.6mm x 122mm (13.
Introduction • 9 DDR DIMM timing register, which provides the DIMM speed control for the entire array, must be programmed to us e the timings of the slow est DIMMs installed.
10 • Introduction • The NuPRO-850 edge connector uses three standard 32-bit PCI connectors. These three connectors carry two busses, one PCI-X 64-bit/66MHz bus and one PCI 32-bi t/33MHz bus. Both busses are provided by Intel 6300ESB ICH. Hardw are Monitor • The W83L784R provides temperature, fans, and voltage monitors.
Jumpers and Connectors • 11 2 J umper s and Connector s This chapter will familiarize the user w ith the NuPRO-850 with the interfaces and connections available before getting star ted.
12 • Jumpers and Connectors 2.1 NuPRO-850 Board Outline and Illustration 2.1.1 NuPRO-850 Top View CN16 LAN1 CN13 CN3 CN6 CN4 CN7 CN9 JP1 CN10 JPY1 CN11 CN12 CN14 CN17 CN1 CN2 FN1 PN1 U12 FN2 DIMM1 D.
Jumpers and Connectors • 13 2.1.2 Front View Figure 4: View of Face Plate Position Description CN1 Case open pin header CN2 Front panel pin header CN3 COM1 connector CN4 Secondary IDE connector CN6 .
14 • Jumpers and Connectors Table 1: Description of Connector Locations 2.2 NuPRO-850 Connector Pin Assignments A detailed description and pin-out for eac h connector is given in the following section. 2.2.1 VGA CRT connector (CN13) Table 2: VGA Connector Pin Definition 2.
Jumpers and Connectors • 15 2.2.3 Gigabit Ethernet connector (LAN1) Table 4: Gigabit Ethernet Connector Pin Definition LED Color Status Function Orange 1000Mbps Green / Orange (Speed status) Green 100Mbps ON Link OFF No link Yellow (Link status) Blinking Data transfer in progress Table 5: Ethernet Color LED Status 2.
16 • Jumpers and Connectors 2.2.5 AC’97 connector (CN6) PIN SIGNA L FUNCTION 1 GND Ground 2 GND Ground 3 5VCC +5V 4 5VCC +5V 5 AC_SYNC AC’97 Sync 6 AC_BITCLK AC’97 Bit Clock 7 AC_SDIN0 AC’97 Serial Data In 0 8 AC_SDOUT AC’97 Serial Data Out 9 AC_SDIN1 AC’97 Serial Data In 1 10 AC_RST# AC’97 Reset Table 7: AC’97 connector (CN6) 2.
Jumpers and Connectors • 17 2.2.7 VGA 2 nd CRT pin header (CN12) Table 9: VGA 2 nd CRT pin header (CN12) 2.2.8 SATA-0 / SATA-1 connectors (CN11, CN10) CN11: SATA-0 CN10: SATA-1 Table 10: SATA-0 / SA.
18 • Jumpers and Connectors 2.2.9 LVDS connector (CN14) Table 11: LVDS connector (CN14) PIN SIGNA L FUNCTION 1 LVDS_PWR LVDS Power 2 LVDS_PWR LVDS Power 3 GND Ground 4 GND Ground 5 LVDS_L0N LVDS low.
Jumpers and Connectors • 19 2.2.11 ATX 12V 4-pin connector (PN1) Table 12: Floppy Connector Pin Definition 2.2.12 Fan1 / Fan2 connector (FN1/FN2) Pin # Signal Name 1 GND 2 Fan power 3 Fan speed Tabl.
20 • Jumpers and Connectors 2.2.13 Primary/Secondary IDE Connector (CN7, CN4) CN7: Primary IDE CN4: Secondary IDE Signal Name Pin # Pin # Signa l Name Reset IDE 1 2 Ground Host data 7 3 4 Host data .
Jumpers and Connectors • 21 2.2.14 Front Panel Pin Header (CN2) PI N SIGNAL FUNCTION PIN GROUP 1 +5V Power 2 WDTLED# Watch Dog LED Signal 3 PLED Power LED Signal Power LED 4 NC No Connect 5 GND Grou.
22 • Jumpers and Connectors 2.2.15 Mini PCI Socket (CN9) PIN SIGNAL PIN SIGNAL 1 NC 2 NC 3 NC 4 NC 5 NC 6 NC 7 NC 8 NC 9 NC 10 NC 11 NC 12 NC 13 NC 14 NC 15 GND 16 EX_INTC# 17 INTB# 18 +5V 19 +3.3V 20 INTA# 21 EX_CLK 22 EX_INTD# 23 GND 24 +3.3VS 25 CLK 26 RESET# 27 GND 28 +3.
Jumpers and Connectors • 23 63 +3.3V 64 FRAME# 65 CLKRUN# 66 TRDY# 67 SERR# 68 STOP# 69 GND 70 +3.3V 71 PERR# 72 DEVSEL# 73 C/BE[1] 74 GND 75 AD[14] 76 AD[15] 77 GND 78 AD[13] 79 AD[12] 80 AD[11] 81 AD[10] 82 GND 83 GND 84 AD[9] 85 AD[8] 86 C/BE[0] 87 AD[7] 88 +3.
.
Getting Started • 25 3 Getting Star ted This chapter gives a summary of what is required to setup an operational system using the NuPRO-850, including hardware installation and an overview of the BIOS.
26 • Getting Started 3.2 Memory Installation This section details the procedure fo r installing system memory on the NuPRO-850. Correct memory configurat ion is critical for proper system operation. 3.2.1 Memory Configuration Options The NuPRO-850 has flexible memory configuration options.
Getting Started • 27 To install either types of module, follow these procedures: Figure 6: Inserting DIMM into Socket 1. Align the module to the socke t so that the edge connectors on the module match the socket sections. 2. Hold the module perpendicular to the motherboard and press the edge connector into the socket.
28 • Getting Started 3.4 BIOS Configuration Overview This section gives an introduction to the Phoenix/Award Plug and Play BIOS Setup Utility. For more detailed informa tion about the BIOS and other utilities, please refer to the BIOS Manual. The BIOS has many separately confi gurable features.
Getting Started • 29 3.5 Operating System Installation For more detailed information about y our operating system, refer to the documentation provided by t he operating system vendor. Install peripheral devices. NuPRO devices are automatically configured by the BIOS during the boot sequence.
.
Device Driver Installation • 31 4 De vice Driv er Installa tion To install drivers for the NuPRO-850, refe r to the installation information in this chapter.
32 • Driver Installation 4.1.2 Hardw are Configuration File Installation This section describes how to install the hardw are configur ation files into a system operating Window s 2000/XP. 1. Check the System Requirements. Windows 2000/XP must be fully installed and running on the system prior to running this softw are.
Device Driver Installation • 33 4.2.2 LAN Driver Installation This section describes the LAN dr iver installation process for the In tel® 82547 Gigabit Ethernet controller under Wi ndows 2000/XP. The Intel® softw are utilities package include Diagnostics utility; Makedisk utility; and 10/100/1000Mbps Ethernet device drivers.
.
Watchdog Timer • 35 5 W atc hdog Timer 5.1 Watchdog Timer The operation of the Nupr o-850’s watchdog timer is described in this chapter. An overview of the w atchdog operat ion and features, as well as the programming procedure is provided to gi ve the user an insight into the workings of the w atchdog timer.
36 • Watchdog Timer The Intel 6300ESB ICH includes a tw o-stage Watchdog Timer (WDT) that provides a resolution that ranging fr om 1 micro second to 10 minutes. The timer uses a 35-bit Down-Counter. The c ounter is loaded w ith the value from the first Preload register.
Watchdog Timer • 37 General Interrupt Status Regis ter This register is at Base + 08H. Bit 0 is set when the first stage of down-counter reaches zero. Bit 0 = 0 – No Interrupt Bit 1 = 1 – Interrupt Active NOTE: This bit is not set in free-running mode.
38 • Watchdog Timer 5.1.2 GPIO Control Registers There are two GPIOs on Nupro-850 that relate to wa tchdog timer. They are listed below. The GPIO control base port is 480H. WDT_TOUT# pin selec tion WDT_TO UT# signal is multiplexed w ith GPIO32. When using WDT, this signal must be switched to WDT_TOUT# function.
Watchdog Timer • 39 5.1.4 Utilities ADLINK provides a demo DO S utility, HRWDT.EXE. It is included in the driver CD. Run “ hrwdt /? ” under the following directory : X:CHIPDRVWDTHRWDT for a more detailed explanation. User also can download the Intel WDT demo wi ndows application from Intel driver download center.
.
ePCI-X Bus Details • 41 6 ePCI-X Bus Details 6.1 NuPRO-850 ePCI-X Bus The NuPRO-850 provides PCI-X/PCI buses . Bus-A can run up to 64-bit PCI-X 66. Bus-B can run PCI 33MHz. The ePCI-X Bus pin assignment is com patible with the PICMG 1.2 ePCI-X specifications.
42 • ePCI-X Bus Details 6.2.5 PME# The NuPRO-850 implement PME# signal and connect it to 6300ESB 6.3 PCI-X Bus Signals 6.3.1 Backplane Present The a_PRSNT# and b_PRSNT # signals are connected to the super I/O chip’s GP25 and GP26 pins respectively .
War ra nty P oli cy • 43 W ar r anty P olicy Thank you for choosing ADLINK. To understand your rights and enjoy all the after-sales services we offer, please read the following carefully. 1. Before using ADLINK’s products pl ease read the user manual and follow the instructions exactly.
44 • Wa rra nt y P oli cy • Damage from improper r epair by unauthorized ADLINK technicians. • Products with altered and/or damaged serial numbers are not entitled to our service. • This warranty is not tr ansferable or extendible. • Other categories not prot ected under our warranty .
Een belangrijk punt na aankoop van elk apparaat Intel NuPRO-850 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Intel NuPRO-850 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Intel NuPRO-850 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Intel NuPRO-850 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Intel NuPRO-850 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Intel NuPRO-850 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Intel NuPRO-850 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Intel NuPRO-850 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
