Gebruiksaanwijzing /service van het product Compass (2008) van de fabrikant Jeep
Ga naar pagina of 399
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS m Introduction ........................... 4 m Rollover W arning ........................ 4 m How T o Use This Manual .................. 5 m W arnings And Cautions ................... 7 m V ehicle Identification Number ..........
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
Failure to use driver and passenger seat belts pr ovided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year , and could reduce disabling injuries by 2 million annually .
6 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against pr ocedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Locking Doors W ith The Key .............. 1 4 ▫ Key-In-Ignition Reminder ................ 1 4 m Steering Wheel Lock — Manual T ransmission Only .
▫ T o Lock The Doors And Liftgate ............ 2 1 ▫ Using The Panic Alarm .................. 2 1 ▫ T o T urn Off “Flash Lights W ith Lock” ........ 2 2 ▫ Programming Additional T ransmitters ........ 2 2 ▫ General Information ..........
▫ Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag ............ 4 6 ▫ Event Data Recorder (EDR) ............... 5 5 ▫ Child Restraint ........................ 5 7 m Engine Break-In Recommendations ........... 6 5 m Safety T ips .
A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer .
NOTE: If you try to r emove the key befor e you place the lever in P ARK, the key may become trapped temporarily in the ignition cylinder . If this occurs, rotate the key to the right slightly , then remove the key as described.
Locking Doors With The Key Y ou can insert the key with either side up. T o lock the door , turn the key rearward, to unlock the door , turn the key forward. See Section 7 of this manual for door lock lubrication. Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition, sounds a signal to remind you to remove the key .
SENTR Y KEY The Sentry Key Immobilizer System pr events unautho- rized vehicle operation by disabling the engine. The system does not need to be armed or activated.
• Exxon/Mobil Speed Pass,™ additional Sentry Keys, or any other transponder-equipped components on the same key chain will not cause a key-related (transpon- der) fault unless the additional part is physically held against the ignition key being used when starting the vehicle.
Customer Key Programming If you have two valid sentry keys, you can program new sentry keys to the system by performing the following procedur e: 1. Cut the additional Sentry Key T ransponder blank(s) to match the ignition switch lock cylinder key code.
General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interference that may cause undes- ired operation.
T o Disarm the System 1. Press UNLOCK on the Keyless Entry T ransmitter . 2. Starting the vehicle with a valid Sentry key will disarm the system. A valid key is one that is pr ogrammed to that particular vehicle. A valid key will disarm the system, an invalid key will allow the engine to run for 2 seconds and stop.
T o Unlock the Doors and Liftgate Press and release the UNLOCK button on the key fob once to unlock only the driver’s door or twice to unlock all the doors and liftgate. When the UNLOCK button is pressed, the illuminated entry will initiate, and the parking lights will flash on twice.
NOTE: Pressing the LOCK button on the keyfob while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. 5.
T o T urn Off “Flash Lights With Lock” NOTE: The Flash Lights W ith Lock feature can be turned on or off. On electronic vehicle information center (EVIC) equipped vehicles refer to 9 Personal Settings 9 in the EVIC section of this manual. On non EVIC - equipped vehicles perform the following steps: 1.
Use the Following procedur e to program additional key fobs if the vehicle is not equipped with Sentry Key: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (Fastening the seatbelt will cancel any chiming that may confuse you during this program- ming procedur e).
General Information This device complies with part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause undesired operation.
2. Remove and replace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o assemble the transmitter case, snap the two halves together .
DOOR LOCKS Manual Door Locks Use the manual door lock plunger to lock the doors from inside the vehicle. If the plunger is down when the door is closed, the door will lock. Therefore, make sure the keys are not inside the vehicle before closing the door .
CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended. Power Door Locks A door lock switch is located on the driver door panel. Press this switch to lock or unlock the doors.
3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not pr eviously locked using the power door lock switch or remote keyless entry transmitter . The Automatic Door Lock feature can be enabled or disabled.
1. The Auto Unlock feature is enabled. 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 3. The transmission is in NEUTRAL or P ARK. 4. The driver door is opened. 5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h).
NOTE: Use the Auto Door Locks and Auto Unlock features in accordance with local laws. “Child-Protection” Door Lock System (Rear Doors) — If Equipped Insert the tip of the ignition key into the lock and rotate to the lock or unlock position. W ARNING! A void trapping anyone in a vehicle in a collision.
NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down window and open the door with the outside door handle. POWER WINDOWS— IF EQUIPPED Power Window Switches The control on the left front door has up-down switches that give you finger tip control of all four power win- dows.
Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. T o disable the window contr ols on the other doors, press the window lock button. T o enable the window controls, press the window control button again.
NOTE: In the event of a power malfunction, or the remote transmitter is inoperative, insert the key into the liftgate lock cylinder and turn to the right (manual lock models only). Using the liftgate handle, pull the liftgate open with one fluid motion.
Gas pr ops support the liftgate in the open position. However , because the gas pressur e dr ops with tempera- ture, it may be necessary to assist the pr ops when opening the liftgate in cold weather . OCCUP ANT RESTRAINTS Some of the most important safety featur es in your vehicle are the restraint systems.
ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All the seats in your vehicle are equipped with Lap/ Shoulder Belts. The belt webbing retractor is designed to lock during very sudden stops or collisions.
W ARNING! • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of a collision the best. • W earing your belt in the wrong place could make your injuries in a collision much worse.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
6. T o release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
As a guide, if you ar e shorter than average, you will prefer a lower position, and if you ar e taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
3. Route the shoulder belt to the inside of the right head restraint. 4. When the belt is long enough to fit, insert the mini latch plate into the mini buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow the belt to go around your lap.
6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, pull on the lap belt.
8. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retractor will withdraw any slack in the belt. 9.
The pretensioners are triggered by the Airbag Control Module (refer to information on Airbags in this section). Like the front airbags, the pretensioners are single use items. After a collision that is severe enough to deploy the airbags and pretensioners, both must be replaced.
NOTE: W atch for the Seat Belt W arning Light to turn on while unbuckling and off while re-buckling the seat belt. It may be necessary to retract the seat belt. 4. T urn the ignition switch to the LOCK position. A single chime will sound to signify that you have success- fully completed the programming.
Seat Belts And Pregnant Women W e recommend that pregnant women use the seat belts throughout their pregnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible.
to a window . If the vehicle is equipped with side curtain airbags, they are located above the side windows. Their covers are also labeled SRS AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment.
NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the curtain airbags. Along with the seat belts, front airbags work with the instrument panel knee bolsters to provide improved protection for the driver and fr ont passenger .
5. If a child from 1 to 12 years old must ride in the fr ont passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child restraint (refer to information on Child Restraint in this section).
Air Bag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Side Remote Acceleration Sensors (If Equipped) • Airbag W arning Light • Driver A.
• The ORC also turns on the Airbag W arning Light in the instrument panel for 6 to 8 seconds as a self-check when the ignition is first turned on. After the self-check, the Airbag W arning Light will turn off. If the ORC detects a malfunction in any part of the system, it turns on the Airbag W arning Light either momentarily or continu- ously .
• The Side Impact SRS Side Curtain Airbag are de- signed to activate only in certain side collisions. When the ORC (with side impact option) detects a collision requiring the side curtain airbag to inflate, it signals the inflators on the crash side of the vehicle.
However , if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately . • As the airbags deflate, you may see some smoke-like particles. The particles are a normal by-pr oduct of the process that generates the nontoxic gas used for airbag inflation.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you.
Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to recor d up to 5 - seconds of specific vehicle data param- eters (see list below) in an event data r ecorder prior to .
custodial entity upon request. General data that does not identify particular vehicles or crashes may be released for incorporation in aggregate crash databases, such as those maintained by the US government and various states.
• Cruise contr ol status • T raction/stability control status • T ire pressur e monitoring system status Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces require that small childr en ride in pr oper restraint systems.
• Safety experts recommend that children ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and 9 convertible 9 child seats.
shoulder belt. (Some booster seats are equipped with a front shield and are held in the vehicle by the lap portion.) NOTE: For additional information refer to www .seatcheck.org. W ARNING! • Improper installation can lead to failure of an infant or child restraint.
restraint so that it is not necessary to use a locking clip. If the seat belt has a cinching latch plate, pulling up on the shoulder portion of the lap/shoulder belt will tighten the belt.
Automatic-Locking Retractor (ALR) T o operate the switchable retractor , pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle. Then pull on the belt until it is all removed from the r etractor .
LA TCH-compatible, you can only install the child re- straints using the vehicle’s seat belts. Please refer to, Installing the Child Restraint System for typical installa- tion instructions. Child restraints systems having attachments designed to connect to the lower anchorages are now available.
NOTE: When using the LA TCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant r estraints are stowed and out of reach of children. It is recommended that befor e installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child r estraint and out of reach.
rear of the seat back. Then tighten all three straps as you push the child r estraint rearwar d and downwar d into the seat. Not all child restraint systems will be installed as we have described here. Again, car efully follow the instruc- tions that come with the child restraint system.
• The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle.
A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the break-in and not interpreted as an indication of difficulty . SAFETY TIPS Exhaust Gas W ARNING! Exhaust gases can injure or kill.
Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor , torn webbing, etc. If there is any question r egarding belt or retractor condition, replace the belt.
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors ............................... 7 3 ▫ Inside Day/Night Mirror — If Equipped ...... 7 3 ▫ Outside Mirror—Driver’s Side ............. 7 3 ▫ Outside Mirror—Passenger’s Side .
▫ Manual Seat Height Adjustment — If Equipped ......................... 1 0 4 ▫ Manual Lumbar— If Equipped ............ 1 0 5 ▫ Driver’s Seat Back Recline ............... 1 0 5 ▫ Adjustable Head Restraints .............. 1 0 6 ▫ Heated Seats — If Equipped .
▫ Intermittent W iper System ............... 1 2 2 ▫ Adding W asher Fluid .................. 1 2 2 m T ilt Steering Column .................... 1 2 2 m Electronic Speed Control — If Equipped ...... 1 2 3 ▫ T o Activate ........................
▫ T roubleshooting T ips ................... 1 4 0 ▫ General Information ................... 1 4 0 m Power Sunroof — If Equipped ............. 1 4 1 ▫ Opening The Sunroof .................. 1 4 2 ▫ Closing The Sunroof ................... 1 4 2 ▫ Pinch Protect Feature .
MIRRORS Inside Day/Night Mirror — If Equipped Adjust the mirror to center on the view through the rear window . A two point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).
Outside Mirror—Passenger’s Side Adjust the convex outside mirror so you can just see the side of your vehicle in the part of the mirr or closest to the vehicle with your head close to the center of the vehicle. W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
T o adjust a mirror , turn the control wand toward the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirror to move. When finished adjusting the mirror , turn the contr ol to the center position to prevent accidentally moving a mirror .
V anity Mirrors — If Equipped T o use the mirror , rotate the sun visor down and swing the mirror cover upward. Sun Visor Sliding Feature The sun visors may be pulled out to provide extended coverage of the side glass.
NOTE: For UConnect™ customer support, visit the following web sites: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect • or call 1–877–855–8400 UConnect.
Phone Button The r earview mirror contains the microphone for the system (depending on the type of mirror and radio equipped), and either the radio or the mirror has the two control buttons (Phone Button and V oice Recognition Button) that will enable you to access the system.
• Prior to giving a voice command, one must wait for the beep, which follows the 9 Ready 9 prompt or another prompt. • For certain operations, compound commands can be used. For example, instead of saying 9 Setup 9 and then 9 Phone Pairing, 9 the following compound command can be said: 9 Setup Phone Pairing.
Pair (Link) UConnect™ System to a Cellular Phone T o begin using your UConnect™ system, you must pair your compatible Bluetooth™ enabled cellular phone. T o complete the pairing pr ocess, you will need to r eference your cellular phone owner’s manual.
Dial by Saying a Number • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Dial. 9 • System will pr ompt you to say the number you want call. • For example, you can say 9 234-567-8901. 9 The phone number that you enter must be of valid length and combination.
Add Names to Y our UConnect™ Phonebook NOTE: Adding names to phone book is recommended when vehicle is not in motion. • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook New Entry . 9 • When pr ompted, say the name of the new entry .
Exchange Profile (OBEX). Please see your phone owners’ manual for specific instructions on how to send these entries from your phone. NOTE: • Phone handset must support Bluetooth OBEX trans- fers of phonebook entries to use this feature.
9 Phonebook Edit 9 can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number , but you can add John Doe’s work number later using the 9 Phonebook Edit 9 feature.
• After confirmation, the phone book entries will be deleted. • Note that only the phone book in the current language is deleted. List All Names in the UConnect™ Phonebook • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook List Names.
Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progr ess and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the ’Phone’ button to place the current call on hold and answer the incoming call.
Conference Call When two calls are in pr ogress (one active and one on hold), press and hold the “Phone” button until you hear a double beep indicating that the two calls have been joined into one conference call.
Call Continuation Call continuation is pr ogression of a phone call on UConnect™ system after the vehicle ignition key has been switched to off. Call continuation functionality available on the vehi.
Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the UConnect™ system is operational, you may reach the emer gency number as follows: • Press the “Phone” button to begin.
Please r efer to the 24-Hour “T owing Assistance” cover- age details in the W arranty information booklet and on the 24–Hour T owing Assistance Card.
Y ou can also send stored UConnect™ phonebook entries as tones for fast and easy access to voicemail and pager entries. T o use this feature, dial the number you wish to call and then press the “V oice Recognition” button and say “Send.
Phone and Network Status Indicators If available on the radio and/or on a premium display such as the instrument panel cluster , and supported by your cell phone, the UConnect™ system will provide notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect™.
Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred from your cellular phone to the UConnect™ system without terminating the call.
Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously paired to the UConnect™ system that you want to use it with. • Press the “Phone” button to begin.
Things Y ou Should Know About Y our UConnect™ System UConnect™ T utorial T o hear a brief tutorial of the system features, press the “Phone” button and say “UConnect™ T utorial.
• Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition.
Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, and • dry weather condition. • operation from driver seat.
98 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 99 3 I n f o r m a t i o n P r o v i d e d b y :.
100 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration.
W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Manual Lumbar— If Equipped The Lumbar adjustment is located on the outboard side of the driver’s seat. T o incr ease or decrease support, rotate the handle up or down. Driver’s Seat Back Recline T o recline: 1. Lean forward before lifting the handle, then lean back to the desired position and release the handle.
Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear . Pull up or push down on the head restraints so that the upper edge is as high as practical. T o raise the head restraint, pull up on the head restraint.
Heated Seats — If Equipped W ARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater .
When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated.
Folding Rear Seat T o pr ovide additional storage area, each r ear seatback can be folded forward. Pull the strap forward to move the seat forward and flat.
Reclining Rear Seat — If Equipped Rear Seat Folded Flat Rear Seat Recline Pull 1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
For additional comfort, pull the strap forward just enough to r elease the seatback latch. Then push the seatback to a reclined position, approximately 35 degrees maximum, and release the strap. W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
TO OPEN AND CLOSE THE HOOD T o open the hood, two latches must be released. First pull the hood release lever located on the left kick panel. Then move the safety catch located under the fr ont edge of the hood, near the center and raise the hood.
T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 20 cm (8 inches) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
NOTE: The lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. They will not turn off automatically .
Daytime Running Lights (DRL) — If Equipped The high beam lights will come on as Daytime Running Lights (DRL) at DRL intensity (lower), whenever the ignition is on, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is of f, and the gear shift is in any position except park.
Fog Lights — If Equipped The front fog light switch is on the Multi-Function Control Lever . T o activate the front fog lights, turn on the parking lights or the low beam headlights and pull out the end of the control lever . NOTE: The fog lights will only operate with the head- lights on low beam.
Move the Multi-Function Control Lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Y ou can signal a lane change by moving the lever partially up or down without moving beyond the detent.
Passing Light Y ou can signal another vehicle with your headlights by lightly pulling the Multi-Function Control Lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is released.
The auxiliary Off-Road lights can be turned on by pressing the top of the switch when Off-Road conditions requir e additional lighting. T o turn off the auxiliary lights press the bottom of the switch. WINDSHIELD WIPERS AND W ASHERS The wipers and washers are operated by a switch on the control lever .
If the lever is pulled while in the OFF position, the wipers will operate for two wipe cycles, then turn OFF . Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of r oad mist or spray from a passing vehicle.
CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted.
Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever . Rotate the knob upward (clockwise) to decrease the delay time and downward (counterclockwise) to increase the delay time.
W ARNING! T ilting the steering column while the vehicle is moving is dangerous. Without a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving.
W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it.
T apping “RESUME ACCEL” once will result i na1m p h (1.6 km/h) speed increase. Each time the lever is tapped, speed increases so that tapping the lever three times will increase speed by 3 mph (4.8 km/h), etc. T o decrease speed while speed control is ON, push down and hold “SET DECEL”.
Using Speed Control On Hills NOTE: The speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills a greater speed loss or gain may occur so it may be preferable to drive without speed control.
ELECTRONIC BRAKE CONTROL SYSTEM – ABS/TCS/BAS/ERM/ESP Y our vehicle may be equipped with an optional ad- vanced electronic brake contr ol system that includes Anti-Lock Brake System (ABS), T raction Control System (TCS), Brake Assist System ( BAS), Electr onic Roll Miti- gation (ERM) and Electronic Stability Program (ESP).
Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressur e to the brakes.
Electronic Roll Mitigation (ERM) This system anticipates the potential for wheel lift by monitoring the driver ’s steering wheel input and the speed of the vehicle.
ESP (Electronic Stability Program) This system enhances directional contr ol and stability of the vehicle under various driving conditions. ESP cor- rects for over/under steering of the vehicle by applying the brake of the appr opriate wheel to assist in counter- acting the over/under steer condition.
W ARNING! • Electronic Stability Program (ESP) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
gravel conditions and more wheel spin than ESP would normally allow is requir ed to gain traction. T o turn ESP on again, momentarily depr ess the “ESP Control Switch”. This will restore the normal “ESP On” mode of operation. W ARNING! In the Partial ESP mode, the engine torque reduction and stability features are desensitized.
In this mode, ESP and TCS, except for the “limited slip” feature described in the TCS section, are turned off until the vehicle reaches a speed of 35 mph (56 km/h). At 35 mph (56 km/h) the normal ESP stability function returns with the exception of engine power r eduction.
W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP is unavailable. In an emer- gency evasive maneuver , the ESP system will not engage to assist in maintaining stability . “ESP Off” mode is intended for off-highway or off-road use, only .
W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety stan- dards.
Y our vehicle should be parked outside of the garage when programming. 1. T urn the ignition switch to the ON/RUN position. 2. Hold the battery side of the hand-held transmitter away from the HomeLink t button you wish to program.
5. PROGRAMMING A ROLLING CODE SYSTEM At the garage door opener motor (in the garage), locate the “learn” or “training” button. This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open & close the door).
7. Return to the vehicle and pr ess the programmed HomeLink t button twice (holding the button for 2 sec- onds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, pr ess the button a third time (for 2 seconds) to complete the training.
Using HomeLink T T o operate, simply press and r elease the programmed HomeLink t button. Activation will now occur for the trained device (i.e. garage door opener , gate operator , security system, entry door lock, home/office lighting, etc. The hand-held transmitter of the device may also be used at any time.
T roubleshooting Tips If you are having tr ouble pr ogramming HomeLink t , here are some of the most common solutions: • Replace the battery in the original transmitter . • Press the Learn Button on the Garage Door Opener to complete the training for Rolling Code.
POWER SUNROOF — IF EQUIPPED The power sunroof switch is located in the reading lamp. W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Opening the Sunroof Manual Mode T o open the sunroof, press and hold the switch rearwar d to full open. Any release of the switch will stop the movement and the sunroof will remain in a partial open condition until the switch is pushed and held rearward again.
Pinch Protect Feature This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an ob- struction in the path of the sunr oof is detected, the sunroof will automatically retract. Next, press the switch forward and release to Express Close.
the rear windows open, open the front and r ear windows together to minimize the buf feting. If the buffeting occurs with the sunr oof open, adjust the sunr oof opening to minimize the buffeting or open any window . Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel.
W ARNING! T o A void Serious Injury or Death: • D on o tu s ea3- Prong Adaptor . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use, and while driving the vehicle • If this outlet is mishandled it may cause an electric shock and failure.
Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
CONSOLE FEA TURES W ARNING! Do not operate this vehicle with the console compart- ment lid in the open position. Cell phones, music players, and other hand held electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury .
CARGO AREA FEA TURES Cargo Light/Removable Self Recharging Flashlight – If Equipped The dual-function light is mounted in the headliner above the cargo area to illuminate the cargo area, and part of it snaps out of the bezel to serve as a flashlight when needed.
Removing Flashlight Three Press Switch UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 149 3 I n f o r m a t i o n P r o v i d e d b y :.
Cargo Cover — If Equipped The cargo area trim panels include two notches for mounting the available cargo cover that accommodates the reclining rear seat. W ARNING! In an accident a cargo cover loose in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle.
Cargo Tie-Down Loops There are four D-rings tie-down loops in the lower trim for securing cargo.The tie-downs located on cargo area floor should be used to safely secure loads when vehicle is moving. W ARNING! • Cargo tie-down Loops are not safe anchors for a child seat tether strap.
Fold Down Speakers – If Equipped When the liftgate is open, the speakers can swing down from the trim panel to face rearward, for tailgating and other activities. REAR WINDOW FEA TURES Rear Window Wiper/W asher A switch on the right side of the steering column controls operation of the r ear wiper/washer function.
If the rear wiper is operating when the ignition is turned OFF , the wiper will automatically return to the “Park” position if power accessory delay is active. Power acces- sory delay can be cancelled by opening the door , if this happens the rear wiper will stop at its current position and will not go to park.
The defroster will automatically turn off after about ten minutes. For five more minutes of operation, press the switch again. T o prevent excessive battery drain, use the defroster only when the engine is operating. CAUTION! Use care when washing the inside of the rear window to prevent damage to heating elements.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panel Features ................. 1 5 8 m Instrument Cluster—Premium .............. 1 5 9 m Instrument Cluster Descriptions ............ 1 6 0 m Electronic V ehicle Information Center (EVIC) – If Equipped .
▫ AM Reception ....................... 1 8 1 ▫ FM Reception ........................ 1 8 1 m Electronic Digital Clock .................. 1 8 2 ▫ Clock Setting Procedur e................. 1 8 2 m Sales Code REF — AM/FM/CD (Single Disc) Radio W ith Optional Satellite Radio And Hands Free Phone Capability .
▫ Operating Instructions — Satellite Radio (If Equipped) ........................ 2 0 5 ▫ REC Setting The Clock ................. 2 0 5 ▫ Audio Clock Display ................... 2 0 7 m Satellite Radio — If Equipped .............. 2 0 8 ▫ System Activation .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Glove Box 9 — Hazard W arning Flasher 2 —Demisters 6 — Storage Bin 10 — ESP OFF Switch — If Equipped 3 — Instrument Cluster 7 — Climate.
INSTRUMENT CLUSTER—PREMIUM UNDERST ANDING YOUR INSTRUMENT P ANEL 159 4 I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge/Fuel Door Location When the ignition switch is in the ON position, the pointer will show the level of fuel remain- ing in the fuel tank. The fuel pump symbol points to the side of the vehicle where the fuel door is located.
4. Oil Pressur e W arning Light Shows low engine oil pr essure. The light will come on and remain on when the ignition switch is turned fr om the OFF to the ON position, and the light will turn off after the engine is started. If the bulb does not come on during starting, have the system checked by an authorized dealer .
10. Anti-Lock Brake W arning Light — If Equipped This light monitors the Anti-Lock Brake System (ABS) described elsewhere in this manual. This light will come on when the ignition key is turned to the ON position and may stay on for as long as four seconds.
13. Engine Coolant T emperature W arning Light This light warns of an overheated engine condi- tion. If the engine is critically hot, a warning chime will sound 10 times. After the chime turns off, the engine will still be critically hot until the light goes out.
In the event of an EBD failure, the Brake W arning Light will turn on along with the ABS Light. Immediate repair to the ABS system is requir ed. The operation of the Brake W arning Light can be checked by turning the ignition switch from the OFF position to the ON position.
the pointer drops back into the normal range. If the pointer remains on the H (red) mark, turn the engine off immediately and call for service. There are steps that you can take to slow down an impending overheat condition. If your air conditioning is on, turn it off.
vehicle placard or tir e inflation pr essure label, you should determine the proper tire inflation pressur e for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires are significantly under-inflated.
NOTE: If this indicator comes on, it will brighten to FULL DA YTIME INTENSITY and will not be dimmable. CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle.
replacement, be sure to keep a record of the reading before and after the service so that the corr ect mileage can be determined. Change Oil Message Y our vehicle is equipped with an engine oil change indicator system.
Certain conditions such as a loose or missing gas cap, poor fuel quality , etc. may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations the vehicle will drive normally and will not requir e towing.
cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your autho- rized dealer as soon as possible. 29. 4WD! W arning Light — If Equipped This light monitors the Four -Wheel-Drive (4WD) system.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) – IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the lower left part of the cluster below the fuel and engine tem- perature gauge.
• Left Front T urn Signal Lamp Out (with a single chime) • Left Rear T urn Signal Lamp Out (with a single chime) • Right Front T urn Signal Lamp Out (with a single chime) • Right Rear T urn Si.
Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. T o turn off the message temporarily , press and release the T rip Odometer button on the instrument cluster . T o r eset the oil change indicator system (after performing the scheduled maintenance) refer to the fol- lowing procedur e.
• Distance T o Empty (DTE) • Elapsed T ime • T ire Pressur e Monitor (TPM) • Personal Settings T o Reset The Display Pressing and holding the EVIC button once will clear the function currently being displayed. Reset will only occur if a resettable function is currently being displayed.
Distance T o Empty (DTE) Shows the estimated distance that can be travelled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , according to the current fuel tank level.
Language When in this display you may select dif ferent languages for all display nomenclature, including the trip functions. Pressing the EVIC button while in this display selects English, Espanol, Deutsch, Italiano, or Francais depend- ing on availability .
Sound Horn with Remote Key Lock When ON is selected a short horn sound will occur when the remote keyless entry “Lock” button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature. Pr ess and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection.
power outlets will remain active for up to 60 minutes after the ignition switch has been turned off. Opening a vehicle door will cancel this feature. Press and hold the EVIC button when in this display until “Off”, “45 sec.”, “5 min.”, or “10 min.
T o Set the V ariance: with the ignition in the ON position, with a short button press (less than one second) press and release the EVIC button several times until you have displayed the Personal Settings (Customer Program- mable Features) menu.
NOTE: The factory default Zone is 8. During program- ming, the Zone value will wrap around from Zone 15 to Zone 1. Compass Calibration The Compass will automatically calibrate if the Cal indicator is .
RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent reception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning.
will remain active for up to 10 minutes after the ignition switch has been turned off. Opening a vehicle front door will cancel this feature. ELECTRONIC DIGIT AL CLOCK The clock and radio each use the display panel built into the radio.
SALES CODE REF — AM/FM/CD (SINGLE DISC) RADIO WITH OPTIONAL SA TELLITE RADIO AND HANDS FREE PHONE CAP ABILITY NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Mode Button (Radio Mode) Press the mode button repeatedly to select between the CD player and Satellite Radio (if equipped). SEEK Button (Radio Mode) Press and release the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode.
Clock Setting Procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side T une/ Audio control. 3. After the hours are adjusted, press the right side T une/Audio control to set the minutes. The minutes will begin to blink.
Press the r otary TUNE control a fourth time and BAL will display . T urn the TUNE control to the right or left to adjust the sound level fr om the right or left side speakers.
Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player and the CD icon will illuminate on the radio display .
SCAN Button (CD Mode) Press this button to play the first 10 seconds of each track. T o stop the scan function, press the button a second time. EJECT Button (CD Mode) Press this button and the disc will unload and move to the entrance for easy removal.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player , cassette player , or microphone and utilize the vehicle’s audio system to amplify the sour ce and play through the vehicle speakers.
TIME Button (Auxiliary Mode) Press this button to change the display from elapsed playing time to time of day . The time of day will display for 5 seconds.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio.
SEEK Button (Radio Mode) Press and release the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Press the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion.
Clock Setting Procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side T une / Audio control. 3. After the hours are adjusted, press the right side T une / Audio control to set the minutes. The minutes will begin to blink.
Press the rotary TUNE control a fourth time and BAL- ANCE will display . T urn the TUNE contr ol to the right or left to adjust the sound level from the right or left side speakers.
Nostalgia Nostalgia Oldies Oldies Personality Personality Public Public Rhythm and Blues Rhythm_and_Blues Religious Music Religious_Music Religious T alk Religious_T alk Rock Rock Soft Soft Soft Rock .
display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM,12 FM and 12 Satellite (if equipped) stations to be stored into push-button memory . The stations stored in SET 2 memory can be selected by pressing the push-button twice.
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the disc number , the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
LOAD / EJT - Eject Press the LOAD/ EJT button and the push- button with the corresponding number where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show 9 EJECTING DISC 9 when the disc is being ejected and pr ompt the user to remove the disc.
RND/PTY Button (Random Play Button) (CD MODE for CD Audio Play) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the SEEK button to move to the next randomly selected track.
The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator 9 .
MPEG Specifi- cation Sampling Fre- quency (kHz) Bit rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.
Operation Instructions - (CD Mode for MP3 Audio Play) SEEK Button (CD Mode for MP3 Play) Pressing the right side of the SEEK button plays the next MP3 File. Pressing the left side of the SEEK button plays the beginning of the MP3 file. Pressing the button within the first ten seconds plays the previous file.
MSG or INFO Button (CD Mode for MP3 Play) Press and MSG or INFO button while playing MP3 disc. The radio scrolls through the following T AG information: Song T itle, Artist, File Name, and Folder Name (if avail- able). Press the MSG or INFO button once more to r eturn to 9 elapsed time 9 priority mode.
Operating Instructions - Satellite Radio Mode (If Equipped) Refer to the Satellite Radio section of the Owner’s Manual. Operating Instructions - V ideo Entertainment System (VES t ) (If Equipped) Refer to separate V ideo Entertainment System (VES t ) Guide.
menus and instructions for selecting a variety of destina- tions and routes, AM/FM stereo radio and six-disc CD changer with MP3 capability . Mapping information for navigation is supplied on a DVD that is loaded into the unit. One map DVD covers all of North America.
2. T o show the GPS clock, select “Displayed Clock: GPS Clock” and press ENTER. 3. T o adjust the time zone, Select “T ime Zone” and press ENTER. Select the appropriate time zone and press ENTER. 4. T o turn daylight savings on or off, select “Daylight Savings” and press ENTER.
3. T o decrease the clock by one hour , use the Select Encoder to highlight the “-” sign. Press ENTER. Press ENTER again to decrease the clock by another hour . 4. T o increase the clock by minutes, make sure “MIN +” is highlighted and press ENTER.
3. T o switch the clock to the small clock, quickly pr ess TIME again. 4. T o toggle back to the large clock, simply pr ess TIME. SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast.
Electronic Serial Number/Sirius Identification Number (ESN/SID) The Electronic Serial Number/Sirius Identification Num- ber is needed to activate your Sirius Satellite Radio system.
Selecting Satellite Mode — RAQ Radio Press the MODE button repeatedly until the word 9 SA T 9 appears in the display . These radios will also display the current station name and program type. For more information such as song title and artist press the MSG or INFO button.
Using the PTY (Program T ype) Button (if equipped) Follow the PTY button instructions that apply to your radio. PTY Button ( SCAN ( When the desired program type is obtained, press the 9 SCAN 9 button within five seconds. The radio will play 7 seconds of the selected channel befor e moving to the next channel of the selected program type.
Reception Quality Satellite reception may be interrupted due to one of the following reasons. • The vehicle is parked in an underground parking structur e or under a physical obstacle. • Dense tr ee coverage may interrupt reception in the form of short audio mutes.
The right hand control is a r ocker type switch with a push button in the center . Pressing the top of the switch will increase the volume and pressing the bottom of the switch will decrease the volume. The button located in the center of the right hand control will switch modes to Radio or CD.
CD/DVD DISC MAINTENANCE T o keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge.
The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmosphere. The controls are as follows: Fan Control Use this control to regulate the amount of air forced through the system in any mode you select.
Mode Control (Air Direction) The mode control allows you to choose fr om several pat- terns of air distribution. Y ou can select either a primary mode, as identified by the symbols, or a blend of two of these modes. The closer the control is to a particular mode, the more air distribu- tion you receive from that mode.
Defrost Air is directed through the windshield and side window demist outlets. Use this mode with maxi- mum fan and temperature settings for best windshield and side window defrosting. NOTE: The air conditioning compressor operates in both Mix and Defrost or a blend of these modes even if the Air Conditioning Snowflake button is not pressed.
Air Conditioning MAX A/C For maximum cooling use the A/C and recirculate buttons at the same time. NOTE: See “Circulation Contr ol” later in this section, for proper or extended use of this position. Air Conditioning (Normal) Use this button to engage the Air Conditioning.
Circulation Control Use this button to choose be- tween outside air intake or recir culation of the air inside the vehicle. A lamp will illu- minate when you are in recir- culate mode.
Operating Tips 220 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
W indow Fogging V ehicle side windows tend to fog on the inside in mild rainy or humid weather . T o clear the windows, set mode to the mix or defrost position. Direct the panel outlets toward the side windows. Do not use recirculate without A/C for long periods as fogging may occur .
Side W indow Demisters A side window demister outlet is at each end of the instrument panel. These nonadjustable outlets direct air toward the side windows when the system is in either the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows through which you view the outside mirrors.
ST ARTING AND OPERA TING CONTENTS m Starting Procedures ..................... 2 2 7 ▫ Manual T ransaxle ..................... 2 2 7 ▫ Automatic T ransaxle ................... 2 2 7 ▫ Normal Starting ...................... 2 2 7 ▫ Extremely Cold W eather (Below 2 20°F Or 2 29°C) .
▫ AutoStick General Information ............ 2 3 7 m Four Wheel Drive Operation — If Equipped .... 2 3 8 m Driving On Slippery Surfaces .............. 2 3 8 ▫ Acceleration ......................... 2 3 8 ▫ T raction ...........................
▫ Replacement T ires ..................... 2 6 3 ▫ Alignment And Balance ................. 2 6 4 m T ire Chains ........................... 2 6 5 m T ire Rotation Recommendations ............ 2 6 5 m T ire Pressure Monitoring System (TPMS) — If Equipped .
▫ T railer T owing W eights (Maximum T railer W eight Ratings) ...................... 2 8 5 ▫ T railer And T ongue W eight .............. 2 8 6 ▫ T owing Requirements .................. 2 8 7 ▫ T owing T ips ......................... 2 9 2 m Recreational T owing (Behind Motorhome, Etc.
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.
start within 15 seconds, turn the ignition switch to the “OFF” position, wait 10 to 15 seconds, then repeat the normal starting procedur e. W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- axle cannot be started this way .
W ARNING! Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing serious personal injury . CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time.
Fully depress the clutch pedal before you shift gears. As you release the clutch pedal, lightly depress the accelera- tor pedal. Use each gear in numerical order - do not skip a gear . Be sure the transaxle is in 1st gear , (not 3rd), when starting from a standing position.
Recommended Shift Speeds T o use your manual transaxle for optimal fuel economy , it should be upshifted as listed in table. Manual T ransaxle Recommended Shift Speeds Units in mph (km/h) Engine Size .
AUTOMA TIC TRANSAXLE — IF EQUIPPED CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into P (Park) only after the vehicle has come to a complete stop. • Shift into or out of R (Reverse) only after the vehicle has come to a complete stop and the engine is at idle speed.
W ARNING! It is dangerous to shift the selector lever out of P (Park) or N (Neutral) if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
Gear Ranges For Continuously V ariable Automatic T ransaxle (CVT) DO NOT race the engine when shifting from P (Park) or N (Neutral) positions into another gear range. P (Park) Supplements the parking brake by locking the transmis- sion. The engine can be started in this range.
The following indicators should be used to ensure that you have engaged the transmission shift lever into the P (Park) position: • When shifting into P (Park), firmly move the lever all the way forward until it stops. • Look at the shift indicator window on the shifter bezel to ensure it is in the P (Park) position.
AUTOSTICK — IF EQUIPPED Autostick is a driver-interactive transmission that offers six manual ratio changes to provide you with more control. Autostick allows you to maximize engine brak- ing, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance.
Autostick operation is activated in the 9 D 9 position by moving the shift lever side to side. Moving the lever to the (+) side will activate Autostick and shift up to the next higher manual ratio, unless you are already operat- ing in or near overdrive in which case, 6th ratio will be selected.
FOUR WHEEL DRIVE OPERA TION — IF EQUIPPED This feature provides full time, on-demand, Four Wheel Drive (4WD). Where one or more wheels have wheel spin or if addi- tional traction is needed in sand, deep snow , or loose traction surfaces, activate the 4WD LOCK switch by pulling up once and releasing.
W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet, mud, loose sand, etc.
Flowing/Rising W ater W ARNING! Do not drive on or cross a road or a path where water is flowing and/or rising (as in storm run-off). Flow- ing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly .
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances.
NOTE: The parking brake lever will not release unless the lever is pulled up slightly past its applied position. When parking on a hill, it is important to set the parking brake before placing the gear selector in Park, otherwise the load on the automatic transaxle locking mechanism may make it difficult to move the selector out of Park.
BRAKE SYSTEM Y our vehicle is equipped with power assisted brakes as standard equipment. In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function.
Anti-Lock Brake System (ABS) — If Equipped The Anti-Lock Brake System pr ovides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up.
The ABS light monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir ed.
• and a slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS. W ARNING! The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment.
W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible.
• European Metric tire sizing is based on European design standards. T ires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter 9 P 9 is absent from this tire size designation. Example: 215/65R15 96H • L T (Light T ruck)-Metric tire sizing is based on U.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ( ....blank.... ( = Passenger car tire based on European design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar .
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loadi.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle.
ST ARTING AND OPERA TING 255 5 I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, af fect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will r educe tr ead life resulting in a need for earlier tire replacement. Under inflation, also increases tire r olling resistance and results in higher fuel consump- tion.
check tire pressure. Do not make a visual judgement when determining pr oper inflation. Radial tir es may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped).
T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important.
Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tir es. It is engineered to be used on your style vehicle only . Since this tire has limited tread life, the original tire should be repaired (or replaced) and rein- stalled at the first opportunity .
original equipped tir e on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling. Since it is not the same tir e, replace (or repair) the original tire and reinstall on the vehicle at the first opportunity .
T read Wear Indicators T read wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tr ead depth becomes 1/16 inch (2 mm).
W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of un- approved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle.
Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear . TIRE CHAINS Due to limited clearance, tire chains are not recom- mended.
Follow the r ecommended tire rotation fr equency for your type of driving found in the “Maintenance Schedules” Section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corr ected befor e rotating.
pressur e will also increase as the vehicle is driven - this is normal and there should be no adjustment for this increased pressure. • The TPM System will warn the driver of a low tire pressur e if.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style.
• Seasonal temperature changes will affect tire pressur e, and the TPM system will monitor the actual tire pressur e in the tire. Base System – If Equipped This is the T ire Pressur e Monitoring System warn- ing indicator located in the instrument cluster .
The T ire Pressur e Monitoring T elltale Lamp will flash on and off for 75 seconds, and remain on solid when a system fault is detected. The system fault will also sound a chime. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists.
5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare tire, the TPMS will update automatically and the TPM T elltale Light will turn OFF , as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires.
addition, the Electronic V ehicle Information Center (EVIC) will display a graphic of the pr essure value(s) with the low tire(s) flashing. Should a low tire condition occur on any of the four active .
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the T ire Pressure Monitoring T elltale Light will no longer flash, the 9 CHECK TPM SYSTEM 9 text message will not be present, and a pressure value will be displayed instead of dashes.
1. The compact spare tire does not have a tire pressure monitoring sensor . Therefor e, the TPMS will not monitor the tire pressure in the compact spare tire.
SNOW TIRES Some areas of the country require the use of snow tires during winter . Standard tir es are of the all season type and satisfy this requir ement as indicated by the M+S designation on the tire sidewall. If you need snow tires, select tires equivalent in size and type to the original equipment tir es.
symptoms, try another brand of gasoline (with the ap- propriate octane rating for your engine) before consider- ing service for the vehicle. Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline r eferred to as “Reformulated Gasoline”.
MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber . Gasolines blended with MMT offer no performance advantage beyond gasolines of the same octane number without MMT .
• An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service.
• Guard against carbon monoxide with proper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly .
NOTE: T ighten the gas cap about 1/4 turn until you hear one click. This is an indication that cap is properly tightened. If the gas cap is not tighten properly , the Malfunction Indicator Light will come on. Be sure the gas cap is tightened every time the vehicle is refueled.
VEHICLE LOADING V ehicle Loading Capacities Front Seat Occupants ....................... 2 Rear Seat Occupants ....................... 3 Luggage ....................... 1 7 5 lbs. (80 kg) V ehicle Rated Capacity ............ 9 2 5 lbs. (420 kg) Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle.
Gross T railer W eight (GTW) The gr oss trailer weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temporary) loaded in or on the trailer in its 9 loaded and ready for operation 9 condition.
Frontal Area The maximum height and maximum width of the front of a trailer . T railer Sway Control The trailer sway control is a telescoping link that can be installed between the hitch receiver and .
W ARNING! An improperly adjusted W eight Distributing Hitch system may reduce handling, stability , braking per- formance, and could result in an accident.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. (See Note 1) 2.
T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer -installed options, must be consider ed as part of the total load on your vehicle.
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be dif ficult for the driver to control.
4. T ongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tire.
− T railer brakes are recommended for trailers over 1,000 lbs (454 kg) and requir ed for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity .
T owing Requirements — T railer Lights & Wiring Whenever you pull a trailer , regardless of the trailer size, stop lights and turn signals on the trailer are requir ed for motoring safety . The T railer T ow Package may includ ea4a n d7p i n wiring harness.
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. T owing T ips — Automatic T ransmission The automatic transmission fluid and filter should be changed if you REGULARL Y tow a trailer for mor e than 45 minutes of continuous operation.
T owing T ips — Cooling System T o r educe potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods of time, put transmission in neutral but do not increase engine idle speed. − Highway Driving Reduce speed.
I n f o r m a t i o n P r o v i d e d b y :.
WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher .................. 2 9 6 m If Y our Engine Overheats ................. 2 9 6 m Automatic T ransaxle Overheating ........... 2 9 8 m Jacking And T ire Changing ................ 2 9 8 ▫ Jack Location .
HAZARD W ARNING FLASHER The flasher switch is located on the instrument panel, below the radio. Depress the switch and both cluster indicators and all front and rear directional signals will flash. Depress the switch again to turn Hazard W arning Flashers off.
the normal range. If the pointer remains on the H (red) mark for more than a minute, turn the engine off imme- diately and call for service. NOTE: There are steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it of f.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7, Maintenance, of this manual.
Jack Location The jack and jack-handle are stowed under the load floor in the cargo area. Spare Tire Stowage The compact spar e tire is stowed under the rear load floor in the cargo area. Spare T ire Removal Lift up the load floor cover and remove the hold down.
• T urn on the Hazard W arning Flasher . • Block both the front and rear of the wheel diagonally oppo- site the jacking position. For example, if changing the right front tire, block the left rear wheel. • Passengers should not remain in the vehicle while the vehicle is being jacked.
3. There are two front jacking locations and two rear jacking locations on each side of the body . The front locations are outlined by two triangular cutouts, the rear ones by two rectangular cutouts. For vehicles equipped with plastic trim, the plastic has been cut away to expose the jacking locations in the body .
7. Lower the vehicle by turning the jack screw to the left. 8. Finish tightening the nuts. Push down on the wrench while tightening the wheel nuts. Alternate nuts until each nut has been tightened twice. Correct wheel nut torque is 100 ft. lbs (135 N·m).
JUMP-ST ARTING PROCEDURES DUE TO A LOW BA TTER Y W ARNING! T ake care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. Y ou can be hurt by the fan. W ARNING! Do not attempt to push or tow your vehicle to get it started.
W ARNING! W ear eye protection and remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. Y ou could be seriously injured.
W ARNING! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or clothing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush the contaminated area immediately with large quantities of water .
and First gear . Usually the least accelerator pedal pres- sure to maintain the r ocking motion without spinning the wheels is most effective. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause axle, tire damage or failure.
All T ransaxles CAUTION! If the vehicle being towed requires steering, the ignition switch must be in the ACCESSOR Y posi- tion, not in the LOCK position. Do not attempt to use sling type equipment when towing. When securing vehicle to flat bed truck, do not attach to front or rear suspension components.
I n f o r m a t i o n P r o v i d e d b y :.
MAINT AINING YOUR VEHICLE CONTENTS m Engine Compartment — Gasoline ........... 3 1 2 m Onboard Diagnostic System — OBD II ........ 3 1 3 ▫ Loose Fuel Filler Cap Message ............ 3 1 4 m Emissions Inspection And Maintenance Programs .........
▫ Front Suspension Ball Joints .............. 3 2 7 ▫ Body Lubrication ..................... 3 2 7 ▫ W indshield W iper Blades ................ 3 2 8 ▫ W indshield W asher Reservoir ............. 3 2 8 ▫ Exhaust System ......................
▫ Off-Road Light ....................... 3 5 8 m Fluids And Capacities ................... 3 6 0 m Fluids, Lubricants, And Genuine Parts ........ 3 6 1 ▫ Engine .
ENGINE COMP ARTMENT — GASOLINE 312 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems.
Loose Fuel Filler Cap Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is possible loose or improperly installed. A GASCAP message will be dis- played in the instr ument cluster . T ighten the gas cap until a 9 clicking 9 sound is heard.
Y our vehicle has a simple ignition key actuated test, which you can use prior to going to the test station. T o check if your vehicle’s OBD system is r eady , you must do the following: 1. Insert your ignition key into the ignition switch. 2. T urn the ignition to the ON position, but do not crank or start the engine.
vehicle serviced befor e going to the I/M station. The I/M station can fail your vehicle because the MIL symbol is on with the engine running. REPLACEMENT P ARTS Use of genuine Mopar t parts for normal/scheduled maintenance and repairs is highly recommended to in- sure the designed performance.
MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there ar e fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance.
Checking the oil while the vehicle is on level ground and only when the engine is hot, will improve the accuracy of the oil level readings. Maintain the oil level between the range markings on the dipstick.
American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. Engine Oil V iscosity (SAE Grade) SAE 5W -20 engine oil is recommended for all operating temperatures.
Disposing of Used Engine Oil Care should be taken in disposing of used engine oil fr om your vehicle. Used oil, indiscriminately discarded, can present a problem to the environment. Contact your dealer , service station, or governmental agency for advice on how and where used oil can be safely discarded in your area.
Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic con- verter will not requir e maintenance.
W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Fuel Filter A plugged fuel filter can cause hard starting or limit the speed at which a vehicle can be driven. Should an excessive amount of dirt accumulate in the fuel tank, frequent filter replacement may be necessary . The fuel filters are located inside the fuel tank.
Maintenance-Free Battery Y ou will never have to add water , nor is periodic main- tenance requir ed. CAUTION! When servicing the battery , always reinstall the bat- tery thermowrap. The thermowrap provides battery heat protection and will extend overall battery life.
CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
W ARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to insure accurate fluid level reading. Do not overfill. Use only manufacturers recommended power steering fluid. If necessary , add fluid to restore to the proper indicated level.
Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner or use the washer solvent. This will remove accumulations of salt, waxes or road film and help reduce streaking and smearing.
when the underside or rear of the vehicle is damaged; have a competent technician inspect the complete ex- haust system and adjacent body areas for broken, dam- aged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment.
Coolant Checks Check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather , where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed and r efilled with fr esh coolant.
CAUTION! Mixing of coolants other than specified Hybrid Or- ganic Additive T echnology (HOA T) engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOA T coolant is intro- duced into the cooling system in an emergency , it should be replaced with the specified coolant as soon as possible.
The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system. Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cording to the temperatures occurring in the ar ea where the vehicle is operated.
Disposal of Used Engine Coolant Used ethylene glycol based engine coolant is a regulated substance r equiring proper disposal. Check with your local authorities to determine the disposal rules for your community .
If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check coolant freeze point in the radiator and in the coolant recovery bottle.
Hoses And V acuum/V apor Harnesses Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage. Hard or soft spots, brittle rubber , cracking, tears, cuts, abrasions, and exc.
W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou wouldn’t have your full braking capacity in an emergency .
W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuf fing, or worn spots, have the brake hoses replaced immediately .
W ARNING! Use of a brake fluid that may have a lower initial boiling point or unidentified as to specification, may result in sudden brake failure during hard prolonged braking. Y ou could have an accident. CAUTION! Use of improper brake fluids will affect overall clutch system performance.
Automatic T ransaxle (CVT) Selection Of Lubricant It is important that the proper lubricant is used in the transaxle to assur e optimum transaxle performance.
Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more that 3/16” (4.7 mm) below the bottom of the hole. Add fluid, if necessary , to maintain the proper level.
Power T ransfer Unit (PTU) – A WD/4WD Models Only Lubricant Selection Use only the manufacturers recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” for correct fluid type. Fluid Level Check V isually inspected the unit at each oil change for leakage.
What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar .
Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose of f the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, r ocker panels and trunk be kept clear and open.
YES Essentials t Fabric Cleaning Procedure – If Equipped YES Essentials t seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel.
W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights.
Instrument Panel Bezels CAUTION! When installing hanging air fresheners in your ve- hicle, read the installation instructions carefully . Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface.
FUSES/INTEGRA TED POWER MODULE (IPM) An Integrated Power Module is located in the engine compartment near the air cleaner assembly . This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover .
Cavity Cartridge Fuse Mini Fuse Description 14 10 Amp Red IOD CCN/ Interior Lighting 15 40 Amp Green RAD Fan Relay Bat- tery Feed 16 15 Amp Lt. Blue IGN Run/Acc Cigar Ltr/Sunroof 17 10 Amp Red IOD Feed Mod-Wcm 18 40 Amp Green ASD Relay Contact PWR Feed 19 20 Amp Y ellow PWR Amp 1 & Amp 2 Feed 20 15 Amp Lt.
Cavity Cartridge Fuse Mini Fuse Description 32 30 Amp Pink ENG ASD Control Feed 1 33 10 Amp Red ABS MOD/J1962 Conn/PCM 34 30 Amp Pink ABS V alve Feed 35 40 Amp Green ABS Pump Feed 36 30 Amp Pink Headl.
VEHICLE STORAGE If you will not be using your vehicle for mor e than 21 days you may want to take steps to pr eserve your battery . Y ou may: • Disengage the mini fuse in the Power Distribution Center labeled IOD (Ignition Off-Draw). • Or , disconnect the negative cable from the battery .
BULB REPLACEMENT Headlamps • Raise the hood and locate connector behind the head- lamp. Locating Headlamp Connector Releasing Red Lock T ab MAINT AINING YOUR VEHICLE 351 7 I n f o r m a t i o n P r .
• Reach into engine compartment and pull red lock out at connector . • T wist the bulb to the left and pull outward from assembly . NOTE: These are halogen bulbs. T ake care not to touch the bulb with your fingers. Body oils from your fingers could cause excessive heat buildup which reduces bulb life.
Fog Lights 1. Access lamp through the lower fascia cutout. 2. Rotate bulb and connector 1/4 turn counterclockwise. 3. Pull bulb off of connector . Removing Halogen Bulb From Assembly Fog Light and Con.
T ail Lights, Rear T urn Signals And Backup Lights — Replacement 1. Remove the two push-pins from the tail light housing. Removing Push-Pins Push-Pins Removed 354 MAINT AINING YOUR VEHICLE I n f o r.
2. Grasp the tail lamp and pull firmly to disengage the lamp from the aperture panel. 3. T wist and remove socket fr om lamp. Pulling Lamp From Body Removing Socket and Bulb MAINT AINING YOUR VEHICLE .
4. Remove bulb from socket and replace. License Lights 1. Use a scr ew driver to gently pry against the side of the snap tab to remove the lamp from the liftgate.
2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket. Removing Socket from Lamp Removing Bulb From Socket MAINT AINING YOUR VEHICLE 357 7 I n f o r m a t i o n P r o v i d e d b y .
Center High-Mounted Stoplight Light is an LED assembly . See your authorized dealer for replacement. Off-Road Light 1. Remove the three screws attaching the lens to the housing.
2. Unlatch the wire clasp securing the bulb into the housing and rotate it into the position shown. 3. Disconnect the bulb from the lamp harness to replace the bulb.
FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 13.5 Gallons 51.0 Liters Engine Oil-W ith Filter All Gasoline Engines (Use API Certified SAE 5W -20 Engine Oil.) 4.5 Quarts 4.26 Liters Cooling System * Mopar t Antifreeze/Coolant 5 Y ear/100,000 Miles Formula), or equivalent.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil.
Chassis Component Fluids, Lubricants and Genuine Parts. Automatic T ransaxle (CVT) Fluid Mopar t CVTF + 4 Manual T ransaxle Fluid Mopar t A TF+4 MS9602 Rear Drive Assembly (RDA) Mopar t Gear & Axle Lubricant SAE 80W -90 API GL 5 or equivalent non- synthetic product.
MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 3 6 4 m Maintenance Schedule ................... 3 6 5 ▫ Required Maintenance Intervals .
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system.
MAINTENANCE SCHEDULE The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. On Electronic V ehicle Information Center (EVIC) equipped vehicles “Oil Change Required” will be dis- played in the EVIC and a single chime will sound, indicating that an oil change is necessary .
At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut of f. Checking the oil level while the vehicle is on level ground will improve the accu- racy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark.
Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter . 6,000 10 000 6 Rotate T ires.
Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the spark plugs (2.
Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the automatic transmission fluid & filter . 120,000 200 000 120 Replace Accessory Drive Belt(s).
I n f o r m a t i o n P r o v i d e d b y :.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 3 7 2 ▫ Prepare For The Appointment ............ 3 7 2 ▫ Prepare A List ........................ 3 7 2 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
T o contact NHTSA, you may either call the Auto Safety Hotline toll fr ee at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administrator , NHTSA, 400 Seventh Str eet, SW ., W ash- ington, DC 20590.
• Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer- controlled vehicle systems and featur es.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car .
T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
I n f o r m a t i o n P r o v i d e d b y :.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
ABS (Anti-Lock Brake System) .............. 2 4 4 Adding Engine Coolant (Antifreeze) .......... 3 3 1 Adding Fuel ........................... 2 7 9 Adding W asher Fluid .................. 122,153 Additives, Fuel ......................... 2 7 7 Air Cleaner , Engine (Engine Air Cleaner Filter) .
Ball Joints ............................. 3 2 7 Battery ............................... 3 2 4 Keyless T ransmitter Replacement (RKE) ....... 2 4 Belts, Drive ............................ 3 2 0 Body Mechanism Lubrication ............... 3 2 7 B-Pillar Location .
Carrier , Luggage ........................ 1 5 4 Catalytic Converter ...................... 3 2 1 Caution, Exhaust Gas ...................... 6 6 CD (Compact Disc) Player ............... 183,190 CD (Compact Disc) Player Maintenance ........ 2 1 4 Cellular Phone .
Points to Remember ................. 332,333 Pressur e Cap ......................... 3 3 2 Selection of Coolant (Antifreeze) ........... 3 3 0 Corrosion Protection ..................... 3 4 1 Crankcase Emission Control System .......... 3 2 2 Cruise Light .
Electronic Speed Control (Cruise Control) ...... 1 2 3 Electronic Stability Program (ESP) ............ 1 3 0 Electronic V ehicle Information Center (EVIC) .... 1 7 1 Emergency , In Case of Jacking ............................. 2 9 8 Jump Starting ....
Flooded Engine Starting ................... 2 2 8 Fluid, Brake ........................... 3 6 2 Fluid Capacities ......................... 3 6 0 Fluid Leaks ............................. 6 7 Fluid Level Checks Automatic T ransaxle ...................
Gasoline (Fuel) ....................... 275,360 Gasoline, Reformulated ................... 2 7 6 Gauges Coolant T emperature .................... 1 6 4 Fuel ................................ 1 6 0 Odometer ........................... 1 6 7 T achometer .
Infant Restraint .......................... 5 7 Information Center , V ehicle ................. 1 7 1 Inside Rearview Mirror .................... 7 3 Instrument Cluster ....................... 1 6 0 Instrument Panel and Contr ols .............. 1 5 8 Instrument Panel Cover .
Bulb Replacement ...................... 3 5 1 C a r g o .............................. 1 4 8 Center Mounted Stop ................... 3 5 8 Daytime Running ...................... 1 1 5 Dimmer Switch, Headlight ................ 1 1 4 Electronic Stability Program (ESP) Indicator .
Maintenance, General ..................... 3 1 7 Maintenance Procedur es ................... 3 1 7 Maintenance Schedule .................... 3 6 5 Malfunction Indicator Light (Check Engine) . . 168,314 Manual, Service ......................... 3 7 6 Manual T ransaxle .
Identification Logo ..................... 3 1 9 Materials Added to ..................... 3 1 9 Recommendation ................... 318,360 Synthetic ............................ 3 1 9 V iscosity ............................ 3 1 9 Oil Pressur e Light ..
Pretensioners Seat Belts ............................. 4 3 Programmable Electronic Features ............ 1 7 5 Programming T ransmitters (Remote Keyless Entry) ................................. 2 2 Radial Ply T ires ......................... 2 5 9 Radio Broadcast Signals .
Roof Rack (Luggage Rack) ................. 1 5 4 Rotation, T ires .......................... 2 6 5 Safety Checks Inside V ehicle ................. 6 6 Safety Checks Outside V ehicle ............... 6 7 Safety Defects, Reporting .................. 3 7 5 Safety Information, T ire .
Service Assistance ....................... 3 7 2 Service Contract ......................... 3 7 4 Service Manuals ........................ 3 7 6 Setting the Clock ................ 182,185,193,205 Settings, Personal ........................ 1 7 5 Shift Speeds, Manual T ransaxle .
T achometer ............................ 1 6 2 T aillights .............................. 3 5 4 T emperature Gauge, Engine Coolant ....... 164,297 T ether Anchor , Child Restraint ............... 6 1 Theft Alarm (Security Alarm) ................ 1 8 Theft System (Security Alarm) .
T owing ............................... 2 8 1 Disabled V ehicle ....................... 3 0 6 Guide .............................. 2 8 5 Recreational .......................... 2 9 3 W eight .............................. 2 8 5 T raction .............
Unleaded Gasoline ....................... 2 7 5 V acuum/V apor Harnesses ................. 3 3 5 V anity Mirrors ........................... 7 6 V ariance, Compass ....................... 1 7 8 V ehicle Identification Number (VIN) ............ 7 V ehicle Loading .
INTRODUCTION INTRODUCTION ROLLOVERWARNING HOW TO USETHIS MANUAL WARNINGSAND CAUTIONS VEHICLE IDENTIFICA TION NUMBER VEHICLE MODIFICA TIONS/ALTERA TIONS THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE A W.
Een belangrijk punt na aankoop van elk apparaat Jeep Compass (2008) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Jeep Compass (2008) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Jeep Compass (2008) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Jeep Compass (2008) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Jeep Compass (2008) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Jeep Compass (2008) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Jeep Compass (2008) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Jeep Compass (2008) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
