Gebruiksaanwijzing /service van het product JLDWW 1205 van de fabrikant John Lewis
Ga naar pagina of 36
JLDWW 1205 Dishwasher Instruction manual.
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, o.
• Keep all detergents in a safe place out of children’s reach. • Keep children well a way from the dishwasher when th e door is open. Correct use • This dishwasher is only intended for washing household utensils suitable for machine washing. • Do not put any solvents in the dishwasher.
• 45°-70° Auto Wash Programme: This machine is fitted with a turbidity sensor which intelligently adjusts the temperature and rinsing cycles during the wash programme, dependin g on the degree of soiling on the dishes. This helps to reduce energy and wa ter consumption on lightly soiled loads.
Contents For the user Important safety information 2 Description of the appliance 6 Control panel 7 Washing programmes 9 When the dishwasher is first installed 11 The water softener 11 Filling with di.
Description of the appliance 1. Upper basket 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Rinse aid dispenser 6. Rating plate 7. Filters 8.
Control panel 1. On/Off butto n 2. Programme selection buttons 3. Multi tab button 4. Half load button 5. Delay start buttons 6. Digital display 7. Programme lights and indicator lights 8.
The digital display indicates: • the level of ha rdness to which the water softener is set, • the approximate remaining time of the running programme, • activation/deactivation of the rinse aid .
Setting mode Press the On/Off button; if ALL programme lights are illuminated the appliance is in setting mode. Always remember that when performing operations such a s: • selecting a washing programme, • setting the water softener level, • activating/deactivating the rinse a id dispenser, the appliance MUST be in setting mode.
Programm e Degree of soil Type of load Programme description Rinse hold Any. Partial load (to be completed later in the day). 1 cold rinse (to avoid food scraps from sticking). This programme does not require the use of detergent. 1) During th e Auto washing pr ogramme the level of soiling on the dishes is d etermined by how cloudy the water is.
When the dishwasher is first installed Before using your dishwasher for the first time: • Ensure that the electrical and water connections comply with the in stallation instructions • Remove all p.
Water hardness Adjusting the water hardness setting Use of salt Clarke °TH mmol/l man ually electronically < 5 < 7 < 0,7 1 level 1 no Setting the water softener The water softener must be set in two ways: manually, using the wa ter hardness dial and electronically.
Filling with dishwasher salt Warning! Only use salt specifically designed for use in dishwas hers. All other types of salt not specifically designed for use in a dishwasher , especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes.
2. Add the rinse aid in the container. The maximum level for filling is indicated by "max". The dispenser holds about 110 ml of rinse aid, which is sufficient f or between 16 and 40 dishwashing cycles, de pending upon the dosage setting. 3. Ensure that the lid is closed after every refill.
Daily use • Check if it's necessary to refill with dishwasher salt or rin se aid. • Open the door and slide o ut the baskets to load the dis hes. • Load cutlery and dishes into the dishwasher. • Fill with dishwasher detergent. • Select a wash progra mme suitable for the cutlery and di shes.
The lower basket The lower basket is design ed to take saucepans, lids, plate s, salad bowls, cutlery, etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely. The two ro ws of prongs in the lo wer basket can lie flat to allow you to load pots, pans and bowls.
If the handles protrude from th e bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles fa cing upwards. Mix spoons with other cutlery to prevent them from sticking together. For best results we recommend you use the cutlery grids.
Maximum height of the dishes in the lower basket With upper basket raised 31 cm With upper basket lowered 27 cm To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mechanism is engaged and the basket is stable.
20 = approximately 20 g of detergent 30 = approximately 30 g of detergent 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will be used during the pr ewash phase.
Multi tab function This appliance is equipped with the Multi tab function, that a llows the use of combi detergent tablets. These products are detergents with a combined cleaning, rinsing a nd salt functions.
5. To memorise the operation, switch off the dishwasher by pressing the On/off button. If you decide to revert back to the use of individual detergents we advise that you: 1. Deactivate the Multi tab function. 2. Fill up the salt container and the rinse aid dispenser again.
Setting and starting the programme with delay start 1. After having selected the washing programm e, press one of th e delay st art buttons until the flashing number of hours for the delay start appear in the digital display. The start of th e selected washing programme can be delayed for between 1 and 19 hours.
Unloading the dishwasher • Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. • Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
7. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly. 8. Place the coarse filter (A) in the microfilter (B) and press together. 9. Put the filter combination in place and lock by turning the handle clockwise to the stop.
Something not working The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without cal ling out an engineer.
Malfunction Possible caus e and solution The programme does not start • The dishwasher door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the main plug. • The fuse has blown out in th e household fuse box.
The wash results are not satisfactory The dishes are not clean • The wrong prog ramme has been selected. • The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. • The spray arms do not rota te freely due to incorrect arrangement of the load.
Installation Warning! It is dangerous to alter the specifications or attempt to modify this product in any way. This appliance is heavy. Care should be taken when moving it. Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Insert the machine after adjusting the levelling with the adjustable f eet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashe d. During all operations that involve a ccessibility to internal components the dishwasher has to be unplugged.
This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back in to the drinking water system. This appliance complies with the applicable plumbing regulation s. Water inlet hose with safety valve After connecting the doub le-walled water inlet hose, the safety valve is next to the tap.
The drain hose can face either to the right or left of the dishwasher. Ensure the hose is not bent or squashe d as this could prevent o r slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could caus e the water to syph on back into the machine.
Electrical connection Warning! Safety standards re quire the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed.
4. The purchase date (found on your receipt). 5. The model and serial number of the appliance (found on the rating plate). So that you always have the se numbers at hand, we recomme nd that you make a note of them here: Mod. : . . . . . . . . . . . . .
34.
35.
John Lewis Partne rship 171 Victoria Street London SW1E 5NN www. johnlewis.com 117986670 - 01 - 062007 - Subject to change without notice.
Een belangrijk punt na aankoop van elk apparaat John Lewis JLDWW 1205 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen John Lewis JLDWW 1205 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens John Lewis JLDWW 1205 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding John Lewis JLDWW 1205 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over John Lewis JLDWW 1205 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van John Lewis JLDWW 1205 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de John Lewis JLDWW 1205 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met John Lewis JLDWW 1205 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
