Gebruiksaanwijzing /service van het product CA-UXB70 van de fabrikant JVC
Ga naar pagina of 36
UX-B70 — Consists of CA-UXB70 and SP-UXB70 MICRO COMPONENT SYSTEM UX-B70 MICRO COMPONENT SYSTEM INSTRUCTIONS WJEM GVT0103-003B [B] AUX/DVD DISC SELECT TREBLE BASS VOLUME FM/AM TAP E PHONES CD CD1 CD.
G-1 W arnings, Cautions and Other s Caution— button! Disconnect the mains plug to shut the pow er off completely (the ST ANDBY/ON lamp goes off). The button in any position does not disconnect the mains line. • When the unit is on standby , the ST ANDBY/ON lamp lights red.
G-2 SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manuf actured to meet inter national saf ety standards, but lik e any electrical equipment, care must be tak en if you are to obtain the best results and saf ety is to be assured.
1 Power sources • When unplugging the unit from the w all outlet, alw ays pull on the plug, not the A C power cord. DO NO T handle the AC po wer cord with wet hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room.
2 Contents Location of the Buttons and Controls ............................. 3 Front Panel ................................................................................ 3 Remote Control .............................................................
3 Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Front Panel Front panel See pages in parentheses for details.
4 1 2 3 4 5 C D PRGM A - B T APE AU TO ST ANDBY MONO STEREO SLEEP REC D AIL Y CD ALL RANDOM REC AHB PRO 2 1 45 6 3 8 79 0 - Display window on the front panel Display window See pages in parentheses for details.
5 ST ANDBY/ON DISPLA Y CLOCK/ TIMER SLEEP TREBLE DISC UP DISC DOWN BASS CANCEL SET 3 / 8 CD 23 T APE FM/AM AUX REPEA T AHB PRO REV . MODE REC CD REC MODE PLA Y MODE 13 2 46 5 79 8 10 +10 RM-SUXB70R REMOTE CONTROL DIMMER V OLUME FM MODE A.
6 Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM (MW) loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately .
7 AM (MW) antenna 1 Connect the AM (MW) loop antenna to the AM LOOP terminals as illustrated. 2 T urn the AM (MW) loop antenna until y ou ha ve the best reception. T o connect an outdoor AM (MW) antenna When reception is poor , connect a single vinyl-co vered wir e to the AM EXT terminal and extend it horizontally .
8 T o remove the speaker grilles The speaker grilles are remo vable as illustrated belo w: T o remov e the speaker grille, insert your fingers at the top of the speaker grille, then pull to wards you. Also pull the bottom to wards you. T o attach the speaker grille, follo w the illustration abov e.
9 Basic and Common Operations Setting the Clock Before operating the unit any further , first set the unit’ s c lock. When you plug in the po wer cord, “0:00” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode.
10 T o turn off the unit automatically (Auto Standby) Using the Auto Standby function, the unit automatically turns itself off if no sound comes in f or more than 3 minutes when “ CD ” or “ T APE ” is selected as the source.
11 Reinforcing the Bass Sound The richness and fullness of the bass sound is clearly maintained regardless of ho w low you set the v olume — Activ e Hyper Bass Pro. • This function also af fects the sound from headphones. • This function only af fects the playback sound, and does not af fect your recording.
12 Adjusting the T one Y ou can adjust the bass le vel (low frequenc y rang e) and the treble le vel (high frequenc y rang e) within a range of “– 5 ” to “ +5. ” When shipped, each le vel is set to “ +2. ” • This function also af fects the sound from headphones.
13 T uning in to a Station 1 Pr ess FM/AM to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei ved station—either FM or AM (MW). • Each time you press the button, the band alternates between FM and AM (MW).
14 4 Pr ess SET a gain. “ STORED ” appears on the display for a while. The tuned station in step 1 is stored in the preset number selected in step 3 .
15 RDS (Radio Data System) allo ws FM stations to send an additional signal along with their regular pr ogram signals. For e xample, the stations send their station names, as well as information about what type of program the y broadcast, such as sports or music, etc.
16 Switching T emporarily to a Program T ype of Y our Choice The Enhanced Other Networks function allo ws the unit to switch temporarily to a broadcast program of your choice (T A, News, and Info) from a dif ferent station. • The function only works when you are listening to a preset FM RDS stations providing the data.
17 Loading Discs On the unit ONL Y : 1 Press one of the disc eject b uttons (CD1 0 – CD5 0 ) f or the disc tray you want to load a disc onto. The unit automatically turns on and the selected disc tray comes out. 2 Place a disc correctl y on the circle of the disc tray , with its label side up.
18 Playing Back All the Entire Discs —Continuous Play Y ou can play discs continuously . 1 Load discs into the 5-CD Changer . 2 Select a disc to play . On the r emote contr ol: 1 Press 3 / 8 CD, then 7 . 2 Press DISC UP or DISC DO WN to select the disc y ou want.
19 T o start playing a disc during playback of another disc On the r emote contr ol: Press DISC UP or DISC DO WN. Each time you press the button, the ne xt or previous disc is selected and playback starts. On the unit: Press DISC SELECT repeatedly . Each time you press the button, the ne xt disc is selected and playback starts.
20 4 Pr ess the number buttons to select a track fr om the disc selected in the abov e step. • For ho w to use the number buttons, see “ T o go to another track directly using the number buttons ” on the pre vious page. 5 Pr ogr am other tracks y ou want.
21 2 Press SET at the starting point fr om which y ou want to repeat (point A). 3 Press SET again at the end point to which y ou want to repeat (point B). The unit automatically locates point A and starts repeating the portion between points A and B. T o cancel A-B Repeat Play , press REPEA T to select “ REPEA T OFF .
22 T o remov e the cassette, push 0 on the unit. The and tape operation indicators go of f. Pressing 0 (tape eject) button also tur ns on the unit. DO NO T press 0 dur ing tape pla y . T o play both sides—Reverse Mode Y ou can set the deck to play just one side or both sides of a tape once, or both sides continuously .
23 IMPORT ANT : • It should be noted that it may be unlawful to r e-record pr e-recorded tapes, r ecords, or discs without the consent of the owner of copyright in the sound or video recording , broadcast or cable prog ram and in any literary , dramatic, musical, or artistic embodied therein.
24 Recording Discs — Disc Synchronized Recording Y ou ha ve three methods to record from discs onto a tape. Using the synchronized recording methods, you can start and stop disc play and recording at the same time. • One Disc Synchr onized Recording — Records the entire disc.
25 T o stop while recording, press 7 . The tape stops after 4 seconds. T o remo ve the cassette, press 0 on the unit. When recording discs A 4-second blank is automatically made on the tape before each track. T o record without the blank, follow the procedure belo w: 1 Load discs you want to record into the 5-CD Changer .
26 First T rack Recording First T rack Recording allows you to record the f irst track of each loaded disc. 1 Insert a recorda ble cassette into the cassette compartment with the exposed part of the tape facing left. 2 Load discs into the 5-CD Changer .
27 Using the T imers DAIL Y On the r emote control ONL Y : 1 Press CLOCK/TIMER. The (timer) indicator lights up and the timer mode indicator ( D AIL Y or REC ) flashes on the display . The unit enters the on-time setting mode. 2 Set the on-time y ou want the unit to turn on.
28 6 Press DISC UP or DISC DO WN to set the volume le vel, then press CLOCK/TIMER. • Y ou can select the v olume le vel between “ V OLUME – –” and “ VOLUME 0 ” to “ V OLUME 40. ” If you select “ V OLUME – – , ” the v olume le vel is set to the current v olume.
29 If y ou set the Sleep Timer after the Daily T imer star ts playing the selected source The Daily timer is canceled. The unit turns of f when the Sleep T imer shut-off time comes. Y ou cannot set the Sleep T imer while the Recording T imer is working.
30 Maintenance T o get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and k eep them in cabinets or on shelves.
31 If you are ha ving a pr oblem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physically damaged, call a qualif ied person, such as your dealer , for service.
32 Classification of the PTY codes for some FM stations may be different fr om the above list on this page. Alarm function If an “ ALARM ” (Emer gency) signal is recei ved from a station while lis.
VICTOR COMPANY OF JAPAN, LIMITED U X MIC R UX-B70 MICRO COMPONENT SYSTEM © 2003 VICTOR COMPANY OF JAPAN, LIMITED EN 0503MWMMDWJEM Cover_UX_B70[B]B.p65 03.
Een belangrijk punt na aankoop van elk apparaat JVC CA-UXB70 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC CA-UXB70 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC CA-UXB70 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC CA-UXB70 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC CA-UXB70 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC CA-UXB70 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC CA-UXB70 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC CA-UXB70 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
