Gebruiksaanwijzing /service van het product GET0125-001A van de fabrikant JVC
Ga naar pagina of 56
GET0125-001A [E/EX] KD-SX998R/KD-SX997R CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER ENGLISH DEUTSCH NEDERLANDS FRANÇAIS For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
2 ENGLISH How to use the MODE button If you press MODE, the unit goes into functions mode (“MODE” flashes on the upper par t of the displa y). While in functions mode , the number buttons and 5 / ∞ buttons work as diff erent function buttons . Ex.
3 ENGLISH CONTENTS Thank you f or purchasing a JVC product. Please read all instructions carefully before oper ation, to ensure your complete understanding and to obtain the best possib le perf ormance from the unit. How to reset your unit ...........
4 ENGLISH LOCA TION OF THE BUTTONS Control panel 1 (standby/on/atten uator) button 2 5 (up) button +10 button 3 4 / ¢ buttons 4 Remote sensor 5 Display windo w 6 0 (eject) button 7 FM/AM (D AB) butto.
ENGLISH 5 Remote controller 3 • Selects the preset stations while listening to the radio (or the D AB tuner). Each time you press the b utton, the preset station (or ser vice) n umber increases, and the selected station (or service) is tuned in. • Skips to the first file of the previous f older while listening to an MP3 disc.
ENGLISH 6 Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or ar tificial lighting).
7 ENGLISH 4 Adjust the sound as y ou want. (See pages 30 and 31.) T o drop the volume in a moment Press briefly while listening to any source. “A TT” starts flashing on the display , and the volume le vel will drop in a moment. T o resume the pre vious volume le vel, press the button briefly again.
8 ENGLISH Setting the clock Y ou can also set the cloc k system to either 24 hours or 12 hours. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (PSM: see pages 32 and 33.) 2 Set the hour . 1 Select “ CLOCK H ” (hour) if not shown on the display .
9 ENGLISH RADIO OPERA TIONS Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a par ticular station. Searching a station automatically: Auto search 1 Select the band (FM1 – 3, AM).
10 ENGLISH When an FM stereo broadcast is hard to receive: 1 Press MODE to enter the functions mode while listening to an FM stereo broadcast. “MODE” flashes on the upper par t of the displa y . 2 Press MO (monaural), while “MODE” is still flashing on the displa y , so that the MO indicator lights up on the displa y .
11 ENGLISH Storing stations in memor y Y ou can use one of the f ollowing two methods to store broadcasting stations in memor y . • Automatic preset of FM stations: SSM (Strong- station Sequential M.
12 ENGLISH 3 Press and hold the number b utton (in this example, 1) for more than 2 seconds. 4 Repeat the abo ve procedure to store other stations into other preset number s. Notes: • A pr eviously pr eset station is erased when a new station is stor ed in the same pr eset number .
13 ENGLISH RDS OPERA TIONS What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals . For e xample, the stations send their station names, as well as inf or mation about what type of programme the y broadcast, such as spor ts or music , etc.
14 ENGLISH 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (PSM: see pages 32 and 33.) 2 Select “AF-REG” (alternative frequency/regionalization reception) if not shown on the displa y . 3 Select the desired mode—“AF , ” “AF REG, ” or “OFF .
15 ENGLISH Using PTY Standby Reception PTY Standby Reception allo ws the unit to switch temporarily to your f av or ite programme (PTY : Programme T ype) from the current source (another FM station, CD , or other connected components). • PTY Standby Reception will not work if you ar e listening to an AM station.
16 ENGLISH Searching your favorite programme Y ou can search an y one of the PTY codes. In addition, you can store y our 6 fa vorite programme types in the number b uttons. When shipped from the factory , the following 6 programme types ha ve been stored in the number buttons (1 to 6).
17 ENGLISH • If there is a station broadcasting a programme of the same PTY code as you selected, that station is tuned in. • If there is no station broadcasting a programme of the same PTY code as y ou selected, the station will not change. Note: In some ar eas, the PTY sear ch will not work corr ectly .
18 ENGLISH Setting the T A volume level Y ou can preset the v olume lev el for T A Standby Reception. When a tr affic programme is receiv ed, the volume le vel automatically changes to the preset le vel. • See also “ Changing the gener al settings (PSM) ” on page 32.
19 ENGLISH PTY codes NEWS: News AFF AIRS: T opical programmes e xpanding on current news or aff airs INFO: Programmes which impart advice on a wide variety of topics SPORT : Spor t e v ents EDUCA TE: .
20 ENGLISH Refer “MP3 OPERA TIONS” on pages 26 to 29 f or operating MP3 discs. Playing a CD 1 Open the control panel. Notes: • When an external component is connected to the A UX input jack on the contr ol panel, be car eful of handling a CD.
21 ENGLISH T o stop play and eject the CD Press 0 . CD play stops and the control panel flips do wn. The CD automatically ejects from the loading slot. The source changes to the previously selected source. • If you change the source , CD pla y also stops (without ejecting the CD).
22 ENGLISH T o play back tracks repeatedly (T rack Repeat Play) Y ou can pla y back the current trac k repeatedly . 1 Press MODE to enter the functions mode while playing a CD .
23 ENGLISH Prohibiting disc ejection Y ou can prohibit disc ejection and can loc k a disc in the loading slot. While pressing CD CD-CH (A UX), press and hold for more than 2 seconds. “ NO EJECT ” flashes on the display for about 5 seconds, and the disc is lock ed and cannot be ejected.
24 ENGLISH MP3 INTRODUCTION Precautions when recording MP3 files on a CD-R or CD-RW This unit can only read MP3 files that are recorded in the format that is compliant with ISO 9660 Le vel 1, Le vel 2, or Joliet. How are MP3 files recorded and played back? MP3 “ files (tracks) ” can be recorded in “ f olders ” —in PC terminology .
25 ENGLISH MP3 folder/ file configuration : Root : Folders : MP3 files MP3 playback/search order • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Normally this unit plays back MP3 files in the recorded order .
26 ENGLISH Refer also to “ CD OPERA TIONS ” on pages 20 to 23. Playing an MP3 disc 1 Open the control panel. Notes: • When an external component is connected to the A UX input jack on the contr ol panel, be car eful of handling a disc.
27 ENGLISH T o stop play and eject the disc Press 0 . Playbac k stops and the control panel flips down. The disc automatically ejects from the loading slot. T o change the display information While playing bac k an MP3 file, y ou can change the MP3 disc information shown on the displa y .
28 ENGLISH Press the number b utton corresponding to the folder n umber to star t pla ying the first file in the selected folder . • T o select a f older number from 01 – 06: Press 1 (7) – 6 (12) briefly . • T o select a f older number from 07 – 12: Press and hold 1 (7) – 6 (12) for more than one second.
29 ENGLISH Selecting MP3 playback modes T o play back files at random (Folder Random/Disc Random Play) Y ou can pla y back all files of the current folder or all files on the MP3 disc at random. 1 Press MODE to enter the functions mode while playing an MP3 disc.
30 ENGLISH SOUND ADJUSTMENTS Selecting preset sound modes (C-EQ: custom equalizer) Y ou can select a preset sound mode (C-EQ: custom equalizer) suitab le to the music genre. • There is a time limit in doing the follo wing procedure. If the setting is canceled before y ou finish, star t from step 1 again.
31 ENGLISH Adjusting the sound Y ou can adjust the sound char acteristics to your preference . 1 Select the item you want to adjust. Each time you press the button, the adjustab le items change as f ollows: Indication T o do: Range BAS* 1 Adjust the bass.
32 ENGLISH Changing the general settings (PSM) Y ou can change the items listed in the tab le below and on page 33 by using the PSM (Preferred Setting Mode) control. Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y .
33 ENGLISH PTY STBY PTY standby TA V O L T raffic announcement volume P-SEARCH Programme search D AB AF * 2 Alternative frequency search D AB V OL * 2 DAB v olume adjustment LEVEL Le vel displa y DIMM.
34 ENGLISH T o set the clock display—CLOCK Y ou can set the cloc k to be shown on the display when the unit is turned on. When shipped from the factory , the clock is set to be shown on the displa y . • ON: Clock displa y is turned on. • OFF: Clock display is turned off .
35 ENGLISH T o turn on/off the key-touch tone — BEEP Y ou can deactiv ate the key-touch tone if y ou do not want it to beep each time y ou press a button. When shipped from the factory , the key-touch tone is activated. • ON: Activates the k ey-touch tone .
36 ENGLISH 4 Move the cur sor to the next (or previous) character position. 5 Repeat steps 3 and 4 until you finish entering the name. 6 Finish the procedure while the last selected character is flashing. T o erase the entered characters Inser t spaces using the same procedure described on the left column.
37 ENGLISH Detaching the control panel Y ou can detach the control panel when lea ving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . Detaching the control panel Before detaching the control panel, be sure to tur n off the po wer .
38 ENGLISH CD CHANGER OPERA TIONS * If you have changed “EXT IN” setting to “LINE IN” (see page 35), you cannot select the CD chang er . • When the current disc is an MP3 disc: Playbac k star ts from the first folder of the current disc once file check is completed.
39 ENGLISH T o go to a particular disc directly Press the number b utton corresponding to the disc number to start its playback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than one second.
40 ENGLISH T o skip to the next or previous folder (only for MP3 discs) T o show the disc information for CD T ext and MP3 discs This is possible only when connecting a JVC CD changer equipped with CD T e xt and/or MP3 disc information reading capability .
41 ENGLISH Mode Active Plays repeatedl y indicator TRK RPT RPT indicator The current (or lights up. specified) track/ file. FLDR RPT* and RPT All files of the indicators current (or light up. specified) folder of the current disc. DISC RPT and RPT All tracks/files of indicators light the current (or up .
42 ENGLISH EXTERNAL COMPONENT OPERA TIONS Playing an external component Y ou can connect tw o external components to this unit. Connect one to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied), and the other to the A UX (auxiliar y) input jack on the control panel.
43 ENGLISH DAB TUNER OPERA TIONS T uning in to an ensemble and one of the services A typical ensemble has 6 or more progr ammes (services) broadcast at the same time. After tuning in to an ensemble , you can select a service you want to listen to . Before y ou star t.
44 ENGLISH 3 Start searching f or an ensemble. When an ensemble is receiv ed, searching stops. T o stop searching before an ensemb le is received, press the same button y ou have pressed f or searching. 4 Select a service (either primary or secondary) you want to listen to.
45 ENGLISH 3 T une in to an ensemble y ou want. 4 Select a service of the ensemble y ou want to listen to. 5 Press and hold the number b utton (in this example, 1) you want to store the selected service into for more than 2 seconds. 6 Repeat the abo ve procedure to store other D AB services into other preset number s.
46 ENGLISH What you can do more with DAB T racing the same program automatically (Alternative Reception) Y ou can k eep listening to the same program. • While receiving a D AB ser vice: When driving.
47 ENGLISH TROUBLESHOOTING What appears to be trouble is not alw a ys serious. Check the f ollowing points bef ore calling a service center . Remedies Adjust it to the optimum le vel. Check the cords and connections. While holding SEL (select), press (standby/on/ attenuator) f or more than 2 seconds to reset the unit.
48 ENGLISH Remedies Change the disc. Add the e xtension code —mp3 to their file names. Change the disc. (Record MP3 files using a compliant application.) Skip to another file or change the disc. (Do not add the extension code—mp3 to non- MP3 files.
49 ENGLISH Remedies Inser t discs into the magazine. Inser t discs correctly . Inser t the magazine. Connect this unit and the CD changer correctly and press the reset button of the CD changer . Press the reset button of the CD changer . While holding SEL (select), press (standby/on/ attenuator) f or more than 2 seconds to reset the unit.
50 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-R Ws (Rewritab le), and CD T e xts. • This unit is also compatible with MP3 discs. How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges.
51 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum P ower Output: F ront: 50 W per channel Rear: 50 W per channel Continuous P ower Output (RMS): F ront: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distor tion.
EN, GE, FR, NL 0103KKSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Sieh.
1 53 mm 184 mm KD-SX998R/KD-SX997R Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement Handleiding voor installatie/aansluiting ENGLISH • This unit is designed to operate on 12 V DC, NEGA TIVE ground electrical systems.
2 • When installing the unit without using the sleeve • Beim Einbau des Geräts ohne Halterung • Lors de l’installation de l’appareil scans utiliser de manchon • Wanneer u het apparaat zonder huis installeert In a T oy ota for e xample, first remov e the car radio and install the unit in its place.
3 7 2 3 4 6 1 3 * * 2 15 B1 B3 B5 B7 B2 B4 B6 B8 A5 A7 A2 A4 A8 A6 B1 B3 B5 B7 B2 B4 B6 B8 A5 A7 A2 A4 A8 A6 1 A8 A7 A5 A4 A2 B5 B6 B4 B3 B8 B7 B2 B1 5 A6 (ILLUMINATION) Before connecting: Chec k the wiring in the vehicle carefully . Incorrect connection may cause serious damage to this unit.
4 INPUT R L L R L R L R * 2 R L R * 2 L INPUT R L LINE REAR FRONT OUT R L R L R L R L L R L R L R L R Y ou can connect an amplifier and other equipment to upgrade y our car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
Een belangrijk punt na aankoop van elk apparaat JVC GET0125-001A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC GET0125-001A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC GET0125-001A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC GET0125-001A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC GET0125-001A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC GET0125-001A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC GET0125-001A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC GET0125-001A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
