Gebruiksaanwijzing /service van het product InteriArt 0205MKH-VT-VT van de fabrikant JVC
Ga naar pagina of 50
©2005 Victor Company of Jap an, Limited 0205MKH-VT -VT 50060737 1 INSTRUCTIONS ENGLISH L T -17D50BK L T -23D50BK INTEGRA TED DIGIT AL WIDE LCD P ANEL TV D igital ideo roadcasting V B DV B Trade Mark .
- 1 - i Contents For your safety ........................................ 2 Important Instruction ............................. 4 Where to install ...................................... 5 Distance Recommendation ................ 5 Important Information .
- 2 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best re- sults and safety is to be assured. So, please read the points below for your own safety.
- 3 - DONT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment. DONT place hot objects or naked flame sources, such as lighted candles or night-lights on, or close to the equipment.
- 4 - WARNING Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down. The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.
- 5 - Where to install WARNING When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV . Make sure the TV is inst alled on the wall by a skilled inst aller . Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recom- mended for comfortable viewing.
- 6 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by: fire; earthquake; accidental dama.
- 7 - Control Panel Buttons ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.p65 24.02.2005, 08:19 7.
- 8 - Using the stand This TV comes with a Table Top Stand already attached. This stand can be used to adjust the direction of the TV screen 10° backward and 5° forward . Tilt the TV up and down: While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly tilt the TV up and down.
- 9 - Remote Control Buttons / I = (S t and By) button TV / VCR / DVD Switch Number buttons AV button (EXT -1,EXT -2,EXT -3,EXT -4, S-VIDEO, PC, DIGIT AL) Colour button MENU = Menu button = Cursor Up .
- 10 - Features It is a remote controlled Integrated Digital colour television and PC monitor . 100 programmes from VHF , UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system.
- 11 - Getting Started Follow Step 1 to 7 to set up your TV : Step 1: Checking the accessories supplied Remote control unit x 1 AA/R6 battery x 2 AC adapter x 1 Power cord x 1 Step 2: Inserting batteries Remove the battery cover located on the back of the remote control by gently pulling upwards from the indicated part.
- 12 - 100 mm mount based on VESA regulation is equipped. The handle and the stand can be left by loosing the screws with a screwdriver when mount- ing the TV on a wall. Spread a soft cloth on a flat table and then place the TV on the cloth with the screen facing downwards when you leave the handle and the stand.
- 13 - IMPORTANT: Only use the adaptor supplied with this TV. Model 17D50BK: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives 12 V DC voltage. Connect this adaptor to a system that supplies 100-240 V AC, 50 Hz.
- 14 - Step 6: Switching the TV ON/OFF To switch the TV on Your TV will switch on by two steps: 1- Connect the power supply cord to the sys- tem. Then the TV switches itself to stand- by mode and the power lamp becomes red located on the front of the TV .
- 15 - I f you select Yes, Analogue terrestrial broadcasting AUTOMATIC PROGRAMMING SYSTEM (A.P.S.) window is displayed. To cancel APS before starting, press BLUE button. First of all choose the Language which the menus of the analogue part of the TV will ap- pear.
- 16 - If you do not want to continue press the BLUE button to exit the menu. If FEATURE NOT AVAILABLE is displayed, download was not performed correctly. Be- fore trying to download again, check that: The VCR power is turned on. The VCR is T -V LINK compatible.
- 17 - Programme Selection (Previous or next programme) Press button to select the previous programme. Press button to select the next programme. Programme Selection (direct access): Press digit buttons on the remote control to select programmes between 0 and 9.
- 18 - The information banner gives a number of facts on the channel selected and the programmes on it. The name of the channel is displayed, along with its channel list num- ber and an indication of the strength of the signal received on this tuning channel.
- 19 - When the TV is being watched, it automati- cally changes to the channel of the re- minded programme when the start time of the scheduled programme is reached.
- 20 - Timers (DTV Timer Recording) By setting the timer, you can record a Digital terrestrial broadcasting (DVB-T) programme with a VCR connected to Ext-2 while you are out. Before using DTV timer recording, the VCR and TV must be connected correctly .
- 21 - input position moves. Press the button. End: Set the timer end time with the number but- tons. When the / buttons are pressed, the input position moves. Press the button. Date: Set the date for the timer to work with the numbers.
- 22 - Cancelling the timer setting Display the REC TIMER menu and press the / buttons to choose which timer setting to cancel. Press the / buttons so that Inactive appears in the Mode column.
- 23 - Receiver Upgrade Set the method to upgrade the Digital terres- trial broadcast (DVB-T) receiver software. 1. Press the / buttons and choose Receiver Upgrade, and press the OK button. The setting window appears. The actual version may be different to the Receiver Upgrade version displayed above.
- 24 - edit channel names. lock channels so that they can not be watched by children. set Favourites so that you can easily choose from only the channels you often watch. Sometimes you may notice a drop in picture quality while watching your programme in the quarter-screen.
- 25 - When a locked channel is chosen, the En- ter PIN code input window will appear. If the correct PIN code is input, the picture appears. When you forget the PIN code for the Lock, you can unluck locked channels by performing Automatic Search (see IN- STALLATION ).
- 26 - Manual Search: This is for searching for digital channels on a single broadcast frequency. The frequency channel number (21-68) is entered in the box at the top left of the screen and the re- ceived signal level and signal quality can be observed on the two bar graphs at the bot- tom.
- 27 - Setting The TV Menu System Your TVs analogue part has been designed with a menu system to provide an easy ma- nipulation of a multi-function system. The TV is controlled by choosing the commands, which are displayed on the screen. MAIN MENU Press the MENU button.
- 28 - Setting Sharpness Using or button select Sharpness. Press button to increase sharpness level. Press button to decrease sharpness level. Setting Colour Using or button select Colour .
- 29 - Sound Menu As you enter the main menu, sound will be the second item. In the main menu, select Sound using or button, then enter the sound menu by pressing / or OK button. Setting V olume: As you enter the sound menu, Volume will be the first selected option.
- 30 - In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option. So when somebody lis- tens to the original language from the loud- speakers, somebody else can listen to the dubbed language from headphone.
- 31 - In EXT mode, Install menu appears like this: You can change only Colour system and VCR. Selecting Programme Using or button select Programme . To select programme number, you can use / button or Digit Buttons Selecting Band Band, can be chosen either, C or S by or button.
- 32 - Program Menu Press " MENU " button, now you are in main menu. In the main menu, select Program using or button. Then enter the Programme menu by pressing / or OK button. Note: There is no Program menu in any EXT modes.
- 33 - transmission of programme systems in your area. First of all choose the Country by using or button. Then press the Red but- ton to start Autostore. After Autostore is finalized, a programme list will appear on the screen.
- 34 - this volume is set to the preceding value, and the second one is increasing the vol- ume level. No-Signal Detection (TV mode) If no valid signal detected, it takes 5 minutes to switch to the Stand-By mode unless any signal detected or any Remote Control com- mand is accessed.
- 35 - The top and bottom of the picture are slightly cut off. 14:9 ZOOM: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. 16:9 ZOOM: This zooms up the wide picture (16:9 aspect ratio) to the full screen.
- 36 - Auto Position If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. Select Auto position item by using or buttons. Press OK button.
- 37 - Contrast, Bright-1, Colour and Sharpness are described at Picture menu on page 27 . Setting PIP Size Using or button select PIP Size. Press or button to change PIP size. Two different PIP sizes are available.
- 38 - To select a page of Teletext Press the appropriate digit buttons for the required T eletext p age number . The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen.
- 39 - For Fastext and T optext The subject-heading for the information may have a p articular colour . Press an appropriate RED , GREEN , YELLOW or BLUE button in order to reach the relevant page quickly . For TOPTEXT If Toptext transmission is present, colour coded buttons will appear in status row.
- 40 - Via the RCA jacks If you have an equipment (such as a Cam- corder) which has the RCA jacks, connect it to the EXT-4 terminal with the video and au- dio cables. If you have a device which outputs compo- nent signal, connect it to the EXT-3 terminal with a component video cable.
- 41 - Connecting the PC Connect PC monitor with 15-pin PC cable to the 15-pin connector on the rear of the com- puter. For detail installation procedure see Installation in PC mode. To connect to S-Video input Connect your camera or camcorder at the back side of your TV.
- 42 - Peripheral Equipment Connections ** The picture represents the rear view of Model 17D50BK. The connections for Model 23D50BK are identical. ENG-IDTV-JVC-1724W-17 INCH TFT LCD.
- 43 - Peripheral Equipment Connections DECODER FOR SATELLITE RECEIVER VIDEO HEADPHONE AUDIO Antenna Connections ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.
- 44 - PC Input T ypical Display Modes (Model: 17D50BK) The display has a maximum resolution of 1280 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
- 45 - PC Input T ypical Display Modes (Model: 23D50BK) The display has a maximum resolution of 1360 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
- 46 - PC Picture If no PC picture appears, check that the D- SUB cable is connected properly. Check that your PC's resolution set correctly. See pages 44-45 for supported modes.
- 47 - Specifications Broadcasting Systems P AL B G , DK, I Channels and Digital : 474 MHz - 858 MHz Frequencies Analogue : 46.25 MHz - 862.25 MHz Cable TV (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync.
- 48 - Specifications Broadcasting Systems P AL B G , DK, I Channels and Digital : 474 MHz - 858 MHz Frequencies Analogue : 46.25 MHz - 862.25 MHz Cable TV (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync.
The following corrections are made on the related pages. Page 25: You can either perform a First Time Installa- tion, effectively resetting the receiver to its factory setting condition, or just search for channels.
Een belangrijk punt na aankoop van elk apparaat JVC InteriArt 0205MKH-VT-VT (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC InteriArt 0205MKH-VT-VT heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC InteriArt 0205MKH-VT-VT vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC InteriArt 0205MKH-VT-VT leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC InteriArt 0205MKH-VT-VT krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC InteriArt 0205MKH-VT-VT bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC InteriArt 0205MKH-VT-VT kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC InteriArt 0205MKH-VT-VT . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
