Gebruiksaanwijzing /service van het product KD-BT11 van de fabrikant JVC
Ga naar pagina of 38
ENGLISH CD RECEIVER KD-BT11 For installation and connections, refer to the separate manual. INSTRUCTIONS GET0508-003A [EX/EU] For canceling the display demonstration, see page 4.
G-1 Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC 0984 English: Español: Hereby, JVC, declares that this KD-BT11 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC.
G-2 Svenska: Lietuviu: Härmed intygar JVC att denna KD-BT11 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Šiuo JVC deklaruoja, kad šis KD-BT11 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see pages 10 and 11). How to forcibly eject a disc • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit.
ENGLISH 4 INTRODUCTIONS Preparation Cancel the display demonstration and set the clock • See also pages 24 and 25. 1 Turn on the power. 2 Enter the PSM settings. 3 Cancel the display demonstrations Select “DEMO,” then “DEMO OFF.” Set the clock Select “CLOCK HOUR,” then adjust the hour.
ENGLISH 5 OPERATIONS Basic operations Using the control panel r • Adjust the sound mode. • Enter the PSM settings [Hold]. t • Enter functions mode. Press M MODE, then one of the following buttons (within 5 seconds)... EQ : Select the sound mode.
ENGLISH 6 Display window 1 Status of Bluetooth device (Device number, [1 – 5]; signal strength, [0 – 3]*; battery reminder, [0 – 3]*) * As the number increases, the signal/battery power becomes stronger.
ENGLISH 7 OPERATIONS To listen to a preset station The following features are available only for FM RDS stations. Searching for FM RDS programme — PTY Search You can tune in to a station broadcasting your favorite programme by searching for a PTY code.
ENGLISH 8 Storing your favorite programme types You can store six favorite programme types. Preset programme types in the number buttons (1 to 6): 1 Select a PTY code (see page 7). 2 Select the preset number (1 – 6) you want to store into. 3 Repeat steps 1 and 2 to store other PTY codes into other preset numbers.
ENGLISH 9 OPERATIONS Tracing the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).
ENGLISH 10 Using the Bluetooth ® devices Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each other.
ENGLISH 11 OPERATIONS Connecting a Bluetooth device for the first time Pairing and PIN code When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. Pairing allows Bluetooth devices to communicate with each other.
ENGLISH 12 Connecting a registered device (PHONE/ AUDIO) Perform steps 1 and 2 on page 11, then... 1 Select “CNNCT PHONE” or “CNNCT AUDIO.” 2 Select a device you want. “CONNECTING” flashes, then “CONNECTED” appears on the display when the device is connected.
ENGLISH 13 OPERATIONS When a call comes in.... The source is automatically changed to “BLUETOOTH,” then “RCV CALL” (receive call) and the phone number appear alternately. When “AUTO ANSWER” is activated.... The unit answers the incoming calls automatically, see page 27.
ENGLISH 14 How to enter phone number 1 Select a number. 2 Move the entry position. 3 Repeat steps 1 and 2 until you finish entering the number. 4 Confirm the entry. To delete the phone numbers • Make sure that the Bluetooth phone is connected. 1 Display the phone number you want to delete by using one of the “CALL” items.
ENGLISH 15 OPERATIONS Using the Bluetooth audio player • Operations and display indications differ depending on their availability on the connected audio player. 1 Select “BLUETOOTH.” • Pressing can enter the Bluetooth menu directly. 2 — Establish the connection with a Bluetooth audio player.
ENGLISH 16 [Press] Select track [Hold] Reverse/fast-forward track MP3: Select folders After pressing M MODE, press the following buttons... Skip 10 tracks MP3: Within the same folder TRACK RPT : Repea.
ENGLISH 17 EXTERNAL DEVICES Listening to the iPod Selecting a track from the menu 1 Enter the main menu. This mode will be canceled if no operations are done for about 5 seconds. 2 Select the desired menu. PLAYLISTS Ô ARTISTS Ô ALBUMS Ô SONGS Ô GENRES Ô COMPOSERS Ô (back to the beginning) 3 Confirm the selection.
ENGLISH 18 Listening to the DAB tuner Before operating, connect the JVC DAB tuner , KT-DB1000 (separately purchased) to the CD changer jack on the rear of the unit. Preparation: Make sure “CHANGER” is selected for the external input setting, see page 26.
ENGLISH 19 EXTERNAL DEVICES Storing DAB services in memory You can preset six DAB services (primary) for each band. 1 Select a service you want (see steps 1 to 4 on page 18). 2 Select the preset number (1 – 6) you want to store into. Tuning in to a preset DAB service 1 2 Select the preset DAB service (primary) number (1 – 6) you want.
ENGLISH 20 Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters (separately purchased): – Li.
ENGLISH 21 EXTERNAL DEVICES This unit can be remotely controlled as instructed here (with an optionally purchased remote controller). We recommend that you use remote controller RM-RK50 with your unit.
ENGLISH 22 EXTERNAL DEVICES & SETTINGS Selecting a preset sound mode You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). 1 Enter functions mode. 2 Select a preset sound mode. 7 • Searches for stations (or DAB services) if pressed briefly.
ENGLISH 23 SETTINGS Sound elements Range/selectable items BASS MID TRE Frequency 60 Hz 80 Hz 100 Hz 200 Hz 500 Hz 1.0 kHz 1.5 kHz 2.5 kHz 10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz Level (LVL) –06 to +06 –06 to +06 –06 to +06 Q Q1.0 Q1.25 Q1.5 Q2.0 Q0.
ENGLISH 24 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table below and on pages 25 and 26. 1 Enter the PSM settings.
ENGLISH 25 SETTINGS Continued on the next page Indications Item ( : Initial) Setting, [reference page] 24H/12H Time display mode • 12 HOUR • 24 HOUR : See also page 4 for setting. CLOCK ADJ * 2 Clock adjustment • AUTO • OFF : The built-in clock is automatically adjusted using the clock data provided via the satellite radio channel.
ENGLISH 26 Indications Item ( : Initial) Setting, [reference page] SCROLL * 5 Scroll • ONCE • AUTO • OFF : Scrolls the displayed information once. : Repeats scrolling (at 5-second intervals). : Cancels. • Pressing DISP for more than one second can scroll the display regardless of the setting.
ENGLISH 27 SETTINGS AUTO ANSWER ON : The unit answers the incoming calls automatically. OFF : The unit does not answer the calls automatically. Answer the calls manually.
ENGLISH 28 Basic operations Turning on the power • By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.
ENGLISH 29 REFERENCES Continued on the next page • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, or for the following reasons: – Discs are dirty or scratched. – Moisture condensation has occurred on the lens inside the unit.
ENGLISH 30 • Some operations and display information may be different according to the connected phone. • This unit may not work for some Bluetooth devices. • Connecting condition may vary depending on the circumstances around you. • When the unit is turned off, the device is disconnected.
ENGLISH 31 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 32 Symptoms Remedies/Causes MP3/WMA playback • Tracks do not play back in the order you have intended them to play. The playback order is determined when the files are recorded. • The elapsed playing time is not correct. This sometimes occurs during playback.
ENGLISH 33 REFERENCES Symptoms Remedies/Causes DAB • “noSIGNAL” appears on the display. Move to an area with stronger signals. • “RESET 8” appears on the display. Connect this unit and the DAB tuner correctly and reset the unit (see page 3).
ENGLISH 34 How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 35 REFERENCES Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
EN, FR 1207DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-.
Een belangrijk punt na aankoop van elk apparaat JVC KD-BT11 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC KD-BT11 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC KD-BT11 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC KD-BT11 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC KD-BT11 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC KD-BT11 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC KD-BT11 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC KD-BT11 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
