Gebruiksaanwijzing /service van het product KD-G115 van de fabrikant JVC
Ga naar pagina of 66
ENGLISH CD RECEIVER KD-G116/KD-G115 KD-G116/KD-G115 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-G116/KD-G115 .......
4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Control panel — KD-G116/KD-G115 Display window 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/atten.
6 ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute.
8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again.
9 ENGLISH 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station Storing stations in memory You can preset six stations for each band.
10 ENGLISH All tracks will be played repeatedly until you stop playback. To stop play and eject the disc Disc operations Playing a disc Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track number To fast-forward or reverse the track Fast-forwards.
11 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected Mode Plays repeatedly TRK RP T : The current track. • RPT lights up.
12 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ E x.
13 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.
14 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
15 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN14-19_KD-G116[U_UH] f .
16 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
17 ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search.
18 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all.
19 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2004 Victor Company of Japan, Limited EN, TH 1004DTSMDTJEIN Rear_KD-G116_001A_ f .indd 2 10/14/04, 10:44:30 AM.
KD-G116/KD-G115 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0252-004A [U/UH] 1004DTSMDTJEIN EN, TH ENGLISH This receiver is designed to operate on 1 2 V DC, N EGA T IVE g round e le ctri cal syste ms.
ELECTRICAL CONNECTIONS T o prevent short circuits, we recommend that you disconnect the batteryʼs negative terminal and make all electrical connections before installing the receiver . • B e sure to g round t his re cei ver to the c ar ’ s ch assi s agai n af ter ins tall atio n.
ENGLISH INDONESIA CD RECEIVER KD-G116/KD-G115 ALA T PENERIMA CD KD-G116/KD-G115 For canceling the display demonstration, see page 7. Untuk membatalkan tampilan demonstrasi, lihat halaman 7. For installation and connections, refer to the separate manual.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-G116/KD-G115 .......
4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Control panel — KD-G116/KD-G115 Display window 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/atten.
6 ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute.
8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again.
9 ENGLISH 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station Storing stations in memory You can preset six stations for each band.
10 ENGLISH All tracks will be played repeatedly until you stop playback. To stop play and eject the disc Disc operations Playing a disc Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track number To fast-forward or reverse the track Fast-forwards.
11 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected Mode Plays repeatedly TRK RP T : The current track. • RPT lights up.
12 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ E x.
13 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.
14 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
15 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN14-19_KD-G116[U_UH] f .
16 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
17 ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search.
18 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all.
19 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2004 Victor Company of Japan, Limited EN, IN 1004DTSMDTJEIN Rear_KD-G116_003A_f.indd 2 10/12/04, 9:03:25 AM.
KD-G116/KD-G115 Installation/Connection Manual Manual Pemasangan/Penyambungan GET0252-006A [UN] 1004DTSMDTJEIN EN, IN ENGLISH This receiver is designed to operate on 12 V DC, NEGA TIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
15 ELECTRICAL CONNECTIONS T o prevent short circuits, we recommend that you disconnect the battery ’ s negative terminal and make all electrical co fore installing the receiver . • B e sur e to gro und t his r ec eive r to th e car ’ s ch ass is ag ain a ft er in sta lla tion .
ENGLISH CD RECEIVER KD-G116/KD-G115 KD-G116/KD-G115 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 ENGLISH How to reset your unit ........................... 2 How to forcibly eject a disc ................... 2 How to read this manual ........................ 4 How to use the MODE button ............... 4 Control panel — KD-G116/KD-G115 .......
4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH Control panel — KD-G116/KD-G115 Display window 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/atten.
6 ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.
7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute.
8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again.
9 ENGLISH 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station Storing stations in memory You can preset six stations for each band.
10 ENGLISH All tracks will be played repeatedly until you stop playback. To stop play and eject the disc Disc operations Playing a disc Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track number To fast-forward or reverse the track Fast-forwards.
11 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected Mode Plays repeatedly TRK RP T : The current track. • RPT lights up.
12 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ E x.
13 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.
14 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
15 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control panel EN14-19_KD-G116[U_UH] f .
16 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
17 ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search.
18 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all.
19 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
© 2004 Victor Company of Japan, Limited EN, CT 1004DTSMDTJEIN Rear_KD-G116_007A_f.indd 2 10/15/04, 12:05:41 PM.
KD-G116/KD-G115 Installation/Connection Manual GET0252-008A [UT] 1004DTSMDTJEIN EN, CT ENGLISH This receiver is designed to operate on 1 2 V DC, N EGA T IVE g round e le ctri cal syste ms . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
15 ELECTRICAL CONNECTIONS T o prevent short circuits, we recommend that you disconnect the batteryʼs negative terminal and make all electrical connections before installing the receiver . • B e sure to g round t his re cei ver to the c ar ’ s ch assi s agai n af ter ins tall atio n.
Een belangrijk punt na aankoop van elk apparaat JVC KD-G115 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC KD-G115 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC KD-G115 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC KD-G115 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC KD-G115 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC KD-G115 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC KD-G115 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC KD-G115 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
