Gebruiksaanwijzing /service van het product KD-SX9350 van de fabrikant JVC
Ga naar pagina of 45
GET0123-001A [J] INSTR UCTIONS MANU AL DE INSTR UCCIONES MANUEL D’INSTRUCTIONS CD RECEIVER KD-SX9350/KD-SX990 ENGLISH ESP A Ñ OL FRAN Ç AIS For installation and connections, refer to the separate manual. Para la instalación y las cone xiones, refiérase al manual separado.
2 ENGLISH BEFORE USE * For safety .... • Do not raise the volume le vel too much, as this will block outside sounds, making driving danger ous. • Stop the car befor e performing any complicated operations.
3 ENGLISH CONTENTS Thank you f or purchasing a JVC product. Please read all instructions carefully bef ore operation, to ensure your complete understanding and to obtain the best possib le performance from the unit. How to reset your unit ............
4 ENGLISH 5 1 2 4 p ; o a r e y u i 6 7 8 w 9 q d s jk l / x c h g f 3 t z LOCA TION OF THE BUTTONS Control panel 1 (standby/on/atten uator) button 2 5 (up) button +10 button 3 4 / ¢ buttons 4 Remote.
ENGLISH 5 Remote controller 3 • Selects the preset stations while listening to the radio . Each time you press the b utton, the preset station number increases, and the selected station is tuned in. • Skips to the first file of the previous f older while listening to an MP3 disc.
ENGLISH 6 Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or ar tificial lighting).
7 ENGLISH BASIC OPERA TIONS T urning on the power 1 T urn on the power . Note on One-T ouch Operation: When you select a sour ce in step 2 below , the power automatically comes on. Y ou do not have to pr ess this button to turn on the power . 2 Select the source.
8 ENGLISH Setting the clock 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y . (PSM: see page 26.) 2 Set the hour . 1 Select “ CLOCK H ” (hour) if not shown on the displa y . 2 Adjust the hour .
9 ENGLISH RADIO OPERA TIONS T o stop searching bef ore a station is received, press the same button y ou hav e pressed f or searching. Searching a station manually: Manual search 1 Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follo ws: Note: This r eceiver has three FM bands (FM1, FM2, FM3).
10 ENGLISH Storing stations in memory Y ou can use one of the f ollowing two methods to store broadcasting stations in memory . • Automatic preset of FM stations: SSM (Strong- station Sequential Mem.
11 ENGLISH Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually . Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
12 ENGLISH Refer “MP3 OPERA TIONS” on pages 18 to 22 for operating MP3 discs. Playing a CD 1 Open the control panel. Note on One-T ouch Operation: When a CD is alr eady in the loading slot, pr essing CD (CD-CH) turns on the unit and starts playback automatically .
13 ENGLISH T o stop play and eject the CD Press 0 . CD play stops and the control panel flips do wn. The CD automatically ejects from the loading slot. The source changes to the pre viously selected source. • If you change the source , CD play also stops (without ejecting the CD).
14 ENGLISH T o play back tracks repeatedly (T rack Repeat Play) Y ou can pla y back the current trac k repeatedly . 1 Press MODE to enter the functions mode while playing a CD .
15 ENGLISH Prohibiting disc ejection Y ou can prohibit disc ejection and can loc k a disc in the loading slot. While pressing CD (CD-CH), press and hold for more than 2 seconds. “ NO EJECT ” flashes on the display f or about 5 seconds, and the disc is loc ked and cannot be ejected.
16 ENGLISH MP3 INTRODUCTION Precautions when recording MP3 files on a CD-R or CD-RW This unit can only read MP3 files that are recorded in the f or mat that is compliant with ISO 9660 Le vel 1, Le vel 2, or Joliet. How are MP3 files recorded and played back? MP3 “ files (tracks) ” can be recorded in “ folder s ” —in PC terminology .
17 ENGLISH MP3 folder/ file configuration : Root : Folders : MP3 files MP3 playback/search order • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Nor mally this unit pla ys back MP3 files in the recorded order .
18 ENGLISH Refer also to “ CD OPERA TIONS ” on pages 12 to 15. Playing an MP3 disc 1 Open the control panel. Note on One-T ouch Operation: When a disc is alr eady in the loading slot, pr essing CD (CD-CH) turns on the unit and starts playback automatically .
19 ENGLISH T o stop play and eject the disc Press 0 . Playbac k stops and the control panel flips down. The disc automatically ejects from the loading slot. T o change the display information While pla ying back an MP3 file, you can change MP3 disc information shown on the displa y .
20 ENGLISH T o go to a particular file quickly within the current folder (+10 and –10 buttons) 1 Press MODE to enter the functions mode while playing an MP3 disc.
21 ENGLISH (f older) and RND indicators Ex.: When you select “ FLDR RND ” Selecting MP3 playback modes T o play back files at random (Folder Random/Disc Random Play) Y ou can pla y back all files of the current f older or all files on the MP3 disc at random.
22 ENGLISH T o play back only intros (T rack Intro Scan/Folder Intro Scan) Y ou can pla y back the first 15 seconds of each file sequentially . 1 Press MODE to enter the functions mode while playing an MP3 disc. “ MODE ” flashes on the upper par t of the display .
23 ENGLISH SOUND ADJUSTMENTS Indication For: Preset values BAS TRE LOUD USER (Flat sound) 00 00 OFF ROCK Rock or +03 +01 ON disco music CLASSIC Classical +01 –02 OFF music POPS Light music +04 +01 OFF HIP HOP Funk or rap +02 00 ON music JAZZ Jazz music +02 +03 OFF Ex.
24 ENGLISH Adjusting the sound Y ou can adjust the sound characteristics to y our preference . 1 Select the item you want to adjust. Each time you press the button, the adjustab le items change as follo ws: For KD-SX9350: For KD-SX990: Indication T o do: Range BAS* 1 Adjust the bass.
25 ENGLISH OTHER MAIN FUNCTIONS Changing the general settings (PSM) Y ou can change the items listed on the ne xt page by using the PSM (Pref erred Setting Mode) control. Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the displa y .
26 ENGLISH 2 Select... Hold... Advance Back Back Adv ance 1:00 8 Counter- clockwise F actor y-preset settings Set... See page Clockwise CLOCK H Hour adjustment CLOCK M Minute adjustment CLOCK Clock di.
27 ENGLISH T o set the clock display—CLOCK Y ou can set the cloc k to be shown on the display when the unit is turned on. When shipped from the factory , the clock is set to be shown on the displa y . • ON: Cloc k display is turned on. • OFF: Clock displa y is turned off.
28 ENGLISH T o select the scroll mode — SCROLL Y ou can select the scroll mode for the disc information (when the entire te xt cannot be shown all at once). When shipped from the factory , scroll mode is set to “ONCE. ” • ONCE: Scrolls only once.
29 ENGLISH 3 Select a character . • See below for a vailable characters. 4 Move the cur sor to the next (or previous) character position. 5 Repeat steps 3 and 4 until you finish entering the name. 6 Finish the procedure while the last selected character is flashing.
30 ENGLISH Detaching the control panel Y ou can detach the control panel when leaving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . Detaching the control panel Before detaching the control panel, be sure to turn off the power .
31 ENGLISH CD CHANGER OPERA TIONS * If you have changed “EXT IN” setting to “LINE IN” (see page 36), you cannot select the CD chang er . • When the current disc is an MP3 disc: Playbac k star ts from the first folder of the current disc once file check is completed.
32 ENGLISH T o go to a particular disc directly Press the number b utton corresponding to the disc number to start its playback (while the CD changer is playing). • T o select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly . • T o select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for more than one second.
33 ENGLISH Press 5 (up) while pla ying an MP3 disc, to go to the ne xt folder . Each time you press the b utton consecutively , the next folder is located, and the first file in the folder starts playbac k.
34 ENGLISH Selecting the playback modes T o play back tracks/files at random (Folder Random/Disc Random/Magazine Random Play) 1 Press MODE to enter the functions mode during play . “ MODE ” flashes on the upper par t of the display . 2 Press RND (random), while “ MODE ” is still flashing on the display .
35 ENGLISH Mode Active Plays repeatedl y indicator TRK RPT RPT indicator The current (or lights up. specified) track/file . FLDR RPT* and RPT All files of the indicators current (or specified) light up . folder of the current disc. DISC RPT and RPT All trac ks/files of the indicators current (or specified) light up .
36 ENGLISH EXTERNAL COMPONENT OPERA TIONS Playing an external component Y ou can connect two external components to this unit. Connect one to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied), and the other to the MP3 INPUT jack on the control panel.
37 ENGLISH TROUBLESHOOTING What appears to be trouble is not alw ays serious. Check the f ollowing points before calling a service center . Remedies Adjust it to the optimum le vel. Check the cords and connections. Press the reset button on the panel holder after detaching the control panel.
38 ENGLISH Remedies Change the disc. Add the e xtension code —mp3 to their file names. Change the disc. (Record MP3 files using a compliant application.) Skip to another file or change the disc. (Do not add the extension code—mp3 to non- MP3 files.
39 ENGLISH Remedies Inser t discs into the magazine. Inser t discs correctly . Inser t the magazine. Connect this unit and the CD changer correctly and press the reset button of the CD changer . Press the reset button of the CD changer . Press the reset button on the panel holder after detaching the control panel.
40 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-R Ws (Rewritable), and CD T exts . • This unit is also compatible with MP3 discs. How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges.
41 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum P ower Output: F ront: 50 W per channel Rear: 50 W per channel Continuous P ow er Output (RMS): F ront: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distor tion.
5 3 m m (7 - 1/4") 1 8 4 m m (2 - 1/8") KD-SX9350/KD-SX8350/KD-SX990 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESP AÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGA TIV A.
2 * Not included with this unit. * No suministrado con esta unidad. * Non fourni avec cet appareil. • When using the optional stay • Cuando emplea un sopor te opcional • Lors de l’utilisation du hauban en option Retrait de l’appareil • A vant de retirer l ’ appareil, lib é rer la section arri è re .
3 L R + - + - + - + - A T ypical Connections / Conexiones típicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully not to fail in connecting this unit. Incorrect connection may cause a serious damage to this unit.
4 R L L L RR INPUT R L R L LINE OUT REAR FRONT L R R L R L INPUT L R S ó lo para KD-SX9350/KD-SX8350: Usted podrá conectar un subwoofer a través de un amplificador para reforzar los graves. • Con respecto a sus conexiones, r efiérase a las instrucciones suministradas con sus subwoofer .
Een belangrijk punt na aankoop van elk apparaat JVC KD-SX9350 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC KD-SX9350 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC KD-SX9350 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC KD-SX9350 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC KD-SX9350 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC KD-SX9350 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC KD-SX9350 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC KD-SX9350 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
