Gebruiksaanwijzing /service van het product MX-J9 van de fabrikant JVC
Ga naar pagina of 32
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
G-1 W arnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. A TTENTION Afin d’éviter tout risque d’électrocution, d’incendie, etc.
CA-D3S CA-D3S 1 cm 1 cm 15 cm 15 cm 15 cm 15 cm 15 cm 10 cm Front view Side view Face Côté Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing.
1 English Thank you for purchasing the JVC Compact Component System. W e hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. Here you will find all the information you need to set up and use the system.
2 English T able of Contents Using the Cassette Deck (Listening to a T ape) ................................. 18 One T ouch Play .................................................. 18 Regular Play .......................................................
3 English Getting Started Accessories Check that you have all of the following items, which are supplied with the System. AM Loop Antenna (1) Remote Control (1) Batteries (2) FM Wire Antenna (1) If any of these items is missing, contact your dealer immediately .
4 English CAUTION: Make all connections before plugging the Unit into an AC power outlet. Connecting the FM Antenna Using the Supplied W ir e Antenna Connecting the AM Antenna FM AM LOOP FM 75 GND GND AM EXT ANTENNA Snap the tabs on the loop into the slots of the base to attach the AM Loop.
5 English CAUTION: Make all connections before plugging the Unit into an AC power outlet. Connecting the Speakers For each speaker , connect one end of the speaker wire to the speaker terminals on the back of the System. 1. Open each of the terminals and insert the speaker wires firmly , then close the terminals.
6 English COMPU PLA Y COMPU PLA Y is JVC’ s feature that lets you control the most frequently used functions of the System with a single touch. One T ouch Operation starts playing a CD, turns on the radio, plays a tape, etc. with a single press of the play button for that function.
7 English T ur ning the Power On and Of f T urning the System On Press the POWER button. The display comes on and the ST ANDBY indicator goes out. The System comes on ready to continue in the mode it was in when the power was last turned off.
8 English Adjusting the V olume T urn the VOLUME control clockwise to increase the volume or counterclockwise to decrease it. T urning the VOLUME control quickly also adjusts the volume level quickly. When using the Remote Control, press the VOLUME + button to increase the volume or press the VOLUME – button to decrease it.
9 English Listening to Auxiliary Equipment By playing the sound from auxiliary equipment through the System, you can gain control over how the music or program sounds. Once the connected equipment is playing through the System, you can apply the sound ef fects.
10 English Using the T uner Display kHz MHz CONT. ALL PRGM REC A.BASS EX S.MODE SLEEP MONO ST CLOCK RANDOM Band display , Frequency display , Preset channel When the System is being used, the display shows other items as well. However , we have only shown the items described in this section.
11 English Thr ee ways to select a station o Press the TUNING UP or TUNING DOWN button repeatedly to move from frequency to frequency until you find the one you want. (Manual Tuning). OR o Press and hold the TUNING UP or TUNING DOWN button for a few seconds, and the frequency starts changing on the display .
12 English Using the CD Player Display kHz MHz CONT. ALL PRGM REC A.BASS EX S.MODE SLEEP MONO ST CLOCK RANDOM Disc display Track number, Playing time, Step number Play mode indicator Repeat indicator When the System is being used, the display shows other items as well.
13 English CD CORRECT INCORRECT T ray 3. Press the 0 button to close the tray . 4. Repeat steps 1 to 3 to inser t other discs into other trays. • T o continue putting discs into other trays, even if a tray is open, by pressing the 0 button of another disc tray , the open tray will close automatically, and the new disc tray will slide out.
14 English Basics of Using the CD Player — Normal Play Playing a Disc 1. Prepare the discs. 2. Press the CD £ / 8 or CD1, CD2 or CD3 button of the disc you want to play . When using the Remote Control, press the £ / 8 button or the CD1, CD2 or CD3 buttons.
15 English PRGM A.BASS EX S.MODE T rack number Disc number Step number CONT. A.BASS EX S.MODE CONTINUE PRGM A.BASS EX S.MODE PLAY MODE CD3 CD2 CD1 or Continuous Play This function plays the disc in the Unit continuously . 1. Prepare the discs. 2. Select Continuous mode.
16 English PRGM A.BASS EX S.MODE 1 CLOCK TIMER SELECT –+ 2 3 456 789 10 + 10 SET PLAY MODE RANDOM A.BASS EX S.MODE RANDOM 3. Press the number keys (1 to 10 and +10) to select the track to program. • Example: For track 5, press 5. For track 15, press +10 then 5.
17 English P .UP P .DOWN Repeating a Selection or the Discs Y ou can have all the discs, the program or the individual selection currently playing repeat as many times as you like. Press the REPEA T button on the unit. The display changes with each press of the button, as shown below .
18 English REC START/STOP POWER STANDBY PLAY & EXCHANGER PHONES FM/AM TAPE AUX P.UP P.DOWN CD TUNING UP DECK A/B DUBBING CD REC START REV. MODE TUNING DOWN COMPU PLAY CONTROL 1 BIT DUAL D/A CONVERTER COMPACT DIGITAL AUDIO EJECT EJECT PLAY REC/PLA Y AUTO REVERSE AUTO REVERSE SOUND MODE VOLUME REPEAT RANDOM CONTINUE ACTIVE BASS EX.
19 English 3. Close the holder gently . When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected. T o change the selected deck, press the DECK A/B button. When using the Remote Control, press the A or B button. 4. Press the T APE ™ £ button (or 2 or 3 button on the Remote Con- trol).
20 English Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, have the source ready , make one or two settings, and you’re ready to record. For each source the procedure is a little bit dif ferent and now we’ll explain just what to do for each one.
21 English Note: At the start and end of cassette tapes, there is leader tape which cannot be recorded onto. Depend- ing on the recording source, the first part of the recording may be missing because of the leader .
22 English T o Pause at Any T ime During the Recording Pr ocess Press the REC P AUSE button on the Remote Control. Then press either the 2 or 3 button on the Remote Control or REC ST AR T/STOP button on the Unit to restart recording.
23 English Using the Timer When the System is being used, the display shows other items as well. However , we have only shown the items described in this section.
24 English Setting the Timer o Y ou can set the T imer whether the Unit is on or of f. Procedur e For Setting the Timer 1. Press the SHIFT button. 2. Press the TIMER button. The Timer indicator on the display lights up and the blinking “TIMER ON” changes to the On Time setting display .
25 English 8 SET SELECT –+ 4 5 8. Press the SET button. The volume level blinks on the display . 9. Press the SELECT + or – button to set the volume level. 10. Press the SET button. The display returns to the display before you set the timer . Befor e T urning the Unit Off • Check that the selected source is ready .
26 English Car e And Maintenance Cassette T apes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette. • Do not touch the tape surface.
27 English • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer , for service.
28 English Specifications Amplifier Output Pow er 60 watts per channel, min. RMS, driven into 6 ohms at 1 kHz with no more than 10% total harmonic distortion. Input Sensitivity/Impedance (1 kHz) AUX 300 mV/50 kohms Speaker terminals 6 – 16 ohms T uner FM T uner T uning Range 87.
J V C EN, FR VICTOR COMP ANY OF JAP AN , LIMITED 0499KSMMDWHIT COVER.MX-J10/J9[C]/f 99.7.6, 1:33 PM 2.
Een belangrijk punt na aankoop van elk apparaat JVC MX-J9 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen JVC MX-J9 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens JVC MX-J9 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding JVC MX-J9 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over JVC MX-J9 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van JVC MX-J9 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de JVC MX-J9 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met JVC MX-J9 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
