Gebruiksaanwijzing /service van het product REV 06 van de fabrikant Aastra
Ga naar pagina of 146
Release Note Release 2.2 SI S I P I I P PHONE P H O N E 51i, 53i, 55i, 57i, and 57i CT 5 1 i , 5 3 i , 5 5 i , 5 7 i , an d 5 7 i C T RN-001029-00 Rev 06.
Aastra T elecom will not accept liability for any da mag es and/or long distance charges, which result from unauthorized and/or unlawful use. While every ef fort has been made to ensure accuracy , Aastra T elecom will not be liable for technical or editorial errors or omissions contained within this documentation.
RN-001029-00, Rev 06, Rel ease 2.2 iii C o n t e n t s Contents General Information ...................... ............. ............ ............. ............. ................ ............. .. 2 Release Content Information ............. ...........
iv RN-001029-00 , Rev 06, Release 2.2 C o n t e n t s BroadSoft Interoperability Fe atures ............. ............. ............. ............. ............. ....... 126 CMS Support ............ ............. ............. ............. ...........
RN-001029-00, Rev 06, Re lease 2.2 1 SIP IP Phone Models 51i, 53i, 55i, 57i, and 57i CT Release Note 2.2 About this Document This document provid es an overview of th e 2.
General Information 2 RN-001029-00, Rev 06, Release 2.2 IP Phone Release Notes 2.2 General Information Release Content Information This document provides release content in formation on the Aastra 51i, 53i, 55i, 57i, and 57i C T SIP IP phone firmware.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 3 5i Series IP Ph one Release Notes Features in Release 2.2 Description This section describes the new features includ ed in Rele ase 2.2 of the 5i Series IP Phones. The following table specifies th e 2.
Features in Releas e 2.2 4 RN-001029-00, Rev 06, Release 2.2 IP Phone Release Notes 2.2 BroadSoft Interop erability Fe atures CMS Support page 126 Server-Side Do Not Disturb (DND), Call Forward (CFWD).
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 5 5i Series IP Ph one Release Notes Usability Features Dial Plan Support for Secondary Dial T one The IP phones now support a feature that allows the user to dial a predefined dial string, obtain a dial to ne, and continue dialing.
Features in Releas e 2.2 6 RN-001029-00, Rev 06, Release 2.2 IP Phone Release Notes 2.2 Account-Based Do Not Disturb (DND) and Call Forward (CFW D) In previous releases of the IP Phone, you could config ure a DND key to set “do not disturb” on all the lines on the phone.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 7 5i Series IP Ph one Release Notes The following describes the soft key behavior for each DND mode. • Account - DND key toggles the a ccount in focus on the IP Phone UI, to ON or OFF if DND enabled for that account.
Features in Releas e 2.2 8 RN-001029-00, Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring DND Using the Configuration Files Y ou use the following parameters to configure DND on the IP Phone.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 9 5i Series IP Ph one Release Notes Example The following is an example of configuring the mode fo r DND in the configuration files: dnd key.
Features in Releas e 2.2 10 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring DND Using the Aastra W eb UI Use the following procedu re to configure DND mode using the Aastra W eb UI: Aastra Web UI 1 Click on Basic Se ttings->Preferences-> General.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 11 5i Series IP Ph one Release Notes 3 Click to save your changes. The change takes effect immediately without a reboot. 4 Click on Basic Settings->Acc ount Configuration . . 5 For each account, enable DND by pla cing a check mark in the box.
Features in Releas e 2.2 12 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 6 Click to save your changes. The change takes effect immediately without a reboot. 7 Click on Operation ->Sof tkeys and XML ; or Click on Operation->Progra mmable Keys; or Click on Operation->Expansion Module .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 13 5i Series IP Ph one Release Notes Using DND Modes via the IP Phone UI If you add a DND key using the co nfiguration files or the Aastra W eb UI, you can toggle the DND state using the IP Phon e UI.
Features in Releas e 2.2 14 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 . Aastra IP Phone UI Ste p Action DND in Account Mode On the 51i and 53i: With the account in focus on the IP Phone UI, press the DND key to toggle DND ON or OFF for the account.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 15 5i Series IP Ph one Release Notes DND in Phone Mode On the 51i and 53i: Press the DND key to toggle DND ON or OFF for all accounts on the phone. T oggling to ON enables DND on all accounts on the phone.
DND in Custom Mode On the 51i and 53i: Press the DND key on the phone. The screen d isplays a lis t of the acco unts on the phone and allows you to enable/disable a sp ecific account or all ac counts. Use the UP and DOWN arro w keys to scroll through the a ccounts.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 17 5i Series IP Ph one Release Notes DND in Custom Mode (continued) On the 55i, 57i, and 57i CT : Press the DND key on the phone. The screen d isplays a lis t of the acco unts on the phone and allows you to enable/disable a sp ecific account or all ac counts.
Features in Releas e 2.2 18 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 CFWD Account-Based Configura tion Call Forward (CFWD) on the IP phone allo ws incoming calls to be forwarded to another destination.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 19 5i Series IP Ph one Release Notes In previous releases, you could configure one phone number and then select the current mode (All, Of f, Busy , No Answer , Busy No Answer).
Features in Releas e 2.2 20 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Important Notes • In the configuration files, the new “ call forward key mode ” parameter listed in the section “Configuring CFWD Us ing the Configuration Files” , is in addition to the previous call forward parameter ( call forward disabled ).
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 21 5i Series IP Ph one Release Notes Configuring CFWD Using the Con figuration Files Y ou use the following parameters to set CF WD on the I.
Features in Releas e 2.2 22 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Parameter – call forward key mode Aastra Web UI: Basic Settings->Preference s->General Configurati on Files aastra.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 23 5i Series IP Ph one Release Notes Y ou use the fol lowing parameters to configure a CFWD k ey and number of rings: • softkeyN type, top.
Features in Releas e 2.2 24 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring CFWD Using the Aastra W eb UI Use the following procedure to configur e CFWD mo de using the Aastr.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 25 5i Series IP Ph one Release Notes 3 Click on Basic Se ttings->Preferences-> General. . Note: If there is no CFWD key configured on the phone or it is removed, you can still set the CFWD modes via the IP Phone UI at the path Options->Call Forward.
Features in Releas e 2.2 26 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 4 In the “ Call Forward Key Mode ” field, select a call fo rward mo de to us e on th e phone. V alid values are: Account, Phone, Custo m. Default is Account .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 27 5i Series IP Ph one Release Notes 6 Click on Basic Settings->Acc ount Configuration .
Features in Releas e 2.2 28 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 8 For each account, in the “ Number ” field, enter the phone number for which you want the incoming calls to forward to if the phone is in the sp ecified state.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 29 5i Series IP Ph one Release Notes Using CFWD Modes via the IP Phone UI If you enable/disable CFWD using the configuration fil es or the Aastra W eb UI, you can use the CFWD scre ens that displa y to the IP Phone UI.
Features in Releas e 2.2 30 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 . Aastra IP Phone UI Ste p Action CFWD in Account M ode (51i and 53i) 1U s e t h e RIGHT and LEFT arrow keys to scroll through each acco unt. In the above example, Screenname1, Screen name2 , and Screenname 3, are three accounts configured on the phone.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 31 5i Series IP Ph one Release Notes 3 Select a state for the account(s) in focus using the UP and DOWN arrow keys.
Features in Releas e 2.2 32 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 7 In the CFWD S tate screen, pres s the DOWN arrow key to scroll to the CFWD Number screen and press CHANGE . 8 Enter a p hone number to appl y to the cu rrent st ate in focus.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 33 5i Series IP Ph one Release Notes 10 For the CFWD No Answer state, In the CFWD Number scre en, press the DOWN arrow key to scroll to the CFWD No.
Features in Releas e 2.2 34 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 14 Press # to confirm the change(s) each time the “Apply Changes” screen displays.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 35 5i Series IP Ph one Release Notes CFWD in Phone Mode (51i and 53i) 1U s e t h e RIGHT and LEFT arrow keys to scroll through each acco unt. In the above example, Screenname1, Screen name2 , and Screenname 3, are three accounts configured on the phone.
Features in Releas e 2.2 36 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 2 Press the Call Forward key . The Call Forw ard Mode screen displays. Use th e UP and DOWN arrow keys to scroll through each state type. In the above example, the account has CFWD All a nd CFWD NoAns enabled as indicated by a checkmark ( 3 ).
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 37 5i Series IP Ph one Release Notes 3 Select a state using the UP and DOWN arrow keys. Y ou can enable/disable a specific account on the ph one with any or all of the following states. However , the configurati on you set will apply to all accounts on the phone.
Features in Releas e 2.2 38 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 5 Press the CHANGE key in the CFW D S tate screen. Press NEXT to toggle the state of the CFWD state ON or OFF . In the example in S tep 4, you press NEXT to change the option to OFF .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 39 5i Series IP Ph one Release Notes 10 For the CFWD No Answe r state, in the CFWD Number screen, press the DOWN arrow key to scroll to the CFWD No.
Features in Releas e 2.2 40 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 14 Press # to confirm the change(s) each time the “Apply Changes” screen displays.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 41 5i Series IP Ph one Release Notes CFWD in Custom Mode (51i an d 53i) 1U s e t h e RIGHT and LEFT arrow keys to scroll through each acco unt. In the above example, Screenname1, Screen name2 , and Screenname 3, are three accounts configured on the phone.
Features in Releas e 2.2 42 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 2 Select an account to configure. Press the CHAN GE key . The CFWD Mode scre en displays.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 43 5i Series IP Ph one Release Notes 3 Select a state for the account(s) in focus using the UP and DOWN arrow keys.
Features in Releas e 2.2 44 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 5 Press the CHANGE key in the CFW D S tate screen. Press NEXT to toggle the state of the CFWD state ON or OFF . In the example in S tep 4, you press NEXT to change the option to OFF .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 45 5i Series IP Ph one Release Notes 10 For the CFWD No Answe r state, in the CFWD Number screen, press the DOWN arrow key to scroll to the CFWD No.
Features in Releas e 2.2 46 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 13 Press DONE to save CFWD All Number , CFWD All S t ate, CFWD Busy Number , CFWD Busy S tate, CFWD No Answer Number , CFWD No Answer S tate, CFWD No Answer Rings.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 47 5i Series IP Ph one Release Notes . Aastra IP Phone UI Ste p Action CFWD in Account Mode (55i, 57i, and 57i CT) 1U s e t h e RIGHT and LEFT arrow keys to scroll through each acco unt.
Features in Releas e 2.2 48 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 3 Select a state for the account(s) in focus using the UP and DOWN arrow keys.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 49 5i Series IP Ph one Release Notes 4 For the CFWD No Answer state, press the CHANGE key for the mode you selected in step 2. Th is displays the Call Forward S tate screen. In the following example, the CFWD All state is ON.
Features in Releas e 2.2 50 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 5 Press the CHANGE key in the CFW D S tate screen. With the cursor in the “ St at e ” field, toggle the state ON and OFF by pressing the CHANGE key .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 51 5i Series IP Ph one Release Notes CFWD in Phone Mode (55i, 57i, and 57i CT) 1U s e t h e RIGHT and LEFT arrow keys to scroll through each acco unt. In the above example, Screenname1, Screen name2 , and Screenname 3, are three accounts configured on the phone.
Features in Releas e 2.2 52 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 3 Select a state for the phone using the UP and DOWN arrow keys. Y ou can enable/disable a specific account on the ph one with any or all of the following states.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 53 5i Series IP Ph one Release Notes 4 In the CFWD No Answer state, press the CHANGE key for the mode you sele cted in step 2. This displays the Call Forward S tate screen. In the following example, the CFWD All state is ON.
Features in Releas e 2.2 54 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 6U s e t h e DOWN arrow key to scroll to the “ Nu mber ” field. Enter a phone number to apply to the current state in focus. When the phone is in the state you specified, and a call comes in to the phone, it forwards the call to the numb er you specify .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 55 5i Series IP Ph one Release Notes CFWD in Custom Mode (55i, 57i, and 57i CT 1U s e t h e RIGHT and LEFT arrow keys to scroll through each acco unt. In the above example, Screenname1, Screen name2 , and Screenname 3, are three accounts configured on the phon e.
Features in Releas e 2.2 56 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 3 Select an account using the UP and DOWN arrow keys. Y ou can also use the following keys if required : All Off Key - Disable s CFWD for all accounts on the phone.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 57 5i Series IP Ph one Release Notes 5 Select a state for the selected account(s) using the UP and DOWN arrow keys.
Features in Releas e 2.2 58 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 6 Press the CHANGE key for the mode you sele cted in step 4. This displays the Call Forward S tate screen.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 59 5i Series IP Ph one Release Notes 7 Press the CHANGE key in the CFW D S tate screen. With the cursor in the “ St at e ” field, toggle the state ON and OFF by pressing the CHANGE key .
Features in Releas e 2.2 60 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Multicast Group Paging An Administrator or User can configure a specific softkey on the phone that allows you to send/receive a Real T ime T ransport Protocol (R TP) stream to/from pre-configured multicast address(es) with out involving SIP signaling.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 61 5i Series IP Ph one Release Notes The recipien t can drop the incomi ng page if required. The recipient can also set Do Not Disturb (DND) to i gnore any incoming p ages. For incoming R TP multicasts, the ring ing display is dependan t on the “ Allow Barge-In ” parameter .
Features in Releas e 2.2 62 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring Group Paging R TP Settings Receiving End of Page Using the Configuration Files Use the following parameters to configur e R TP streaming on the receiving end for Paging applicatio ns using the configuration fi les.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 63 5i Series IP Ph one Release Notes Receiving End of Page Using the Aastra W eb UI Use the following procedure to configure R TP streaming on the receiving end for Paging applications usin g the Aastra W eb UI .
Features in Releas e 2.2 64 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Sending End of Page Using the Con figuration Files Use the following parameters to configur e R TP streaming on the sending end for Paging applicatio ns using the configuration fi les.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 65 5i Series IP Ph one Release Notes Sending End of Page Using the Aastra W eb UI Use the following procedure to configure R TP streaming for Paging applicat ions using the Aastra W eb UI . Aastra Web UI 1 Click on Softkeys and XML.
Features in Releas e 2.2 66 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 4 In the “ Va l u e ” field, enter a multicast IP address and a port number for the Paging key . When you press this key , th e phone initiates an outgoing mu lticast RTP session to the specified address(es) using the specified po rt.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 67 5i Series IP Ph one Release Notes Using the Configured Paging Key o n the IP Phone The following procedure describes the us e of the Paging key . The procedures assumes you have already configur ed the Paging key using th e configuration files or the Aastra W eb UI.
Features in Releas e 2.2 68 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Simplified T ransfer Using BLF and S peeddial Keys In Release 2.2, a transfer (Xfer) enhanc eme nt has been added to the original functionality of the BLF and Speeddial keys - BLF/Xfer and Speeddial/Xfer .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 69 5i Series IP Ph one Release Notes BLF/Xfer Key Requirements and Functionality • BLF/Xfer and BLF A BLF/Xfer key can be configured for subscribing to a n extension and monitor the status of the extension, si milar to the the BLF key functionality .
Features in Releas e 2.2 70 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Speeddial/Xfer Key Requirements and Func tionality The Speeddial/Xfer key has the following capabilities: • .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 71 5i Series IP Ph one Release Notes Configuring the BLF/Xfer Key and the Speeddial/ Xfer Key Using the Configuration Files Y ou use the following parameters in th e configurat ion files to configure the BLF/Xfer key and/or Spee ddial/Xfer key on the IP Phone.
Features in Releas e 2.2 72 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring the BLF/Xfer Key and the Speeddial/ Xfer Key Using the Aastra W eb UI Y ou configure the BLF/Xfer k ey and/or the Speeddial/Xfer Key on the IP ph one similar to configuring a BLF key or speeddial key using the Aastra W eb UI.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 73 5i Series IP Ph one Release Notes T op Keys T ab (57i example) 2 Choose a key that you want to assign the BLF /Xf er key or a S peeddial/Xfe r key to, and select BLF/ Xfer or Speeddial/Xfer from the “ Ty p e ” field.
Features in Releas e 2.2 74 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Ability to Disable Switching Focus to a Ringing Line When on a Ca ll In Release 2.2, it is now possib le to control the behavior of the ph one when it receives an incoming call when it is alread y in a conn ected call.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 75 5i Series IP Ph one Release Notes Configuring “Switch Focus to Ringing Line” Using the Aastra W eb UI Use the following procedure to enable or disable the “Switch Focus to Ringing Line” using the Aastra W eb UI .
Features in Releas e 2.2 76 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Security Features 802.1x Support The IP phones now support the IEEE 802.1x protocol. The 802.1x protocol is a standard for passing Extens ible Authentication Protocol (EAP) over a wired or wireless Local Area Network (LAN).
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 77 5i Series IP Ph one Release Notes Certificates and Private Key Info rmation • If the certificates and private key are NO T stored in the phone: — the phone co nnects to an open un authenticated VLAN and the certificates are downloaded.
Features in Releas e 2.2 78 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring the 802.1x Protocol Us ing the Configuration Fi les Use the following parame ters to configure the 8 02.1x Protocol on yo ur phone using the configuration files.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 79 5i Series IP Ph one Release Notes Parameter – pc port passthru enabled IP phone UI Options->Administrator Menu-> Network Settings->Ethe rnet Link Aastra Web UI Advanced Settings->Network-> Basic Network Settings Configurati on Files aastra.
Features in Releas e 2.2 80 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Parameter – identity IP Phone UI: Options->Administrator Menu-> Network Settings->Etherne t Link-> 802.1x Settings->EAP-MD5 Settings Aastra Web UI: Advanced Settings->802 .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 81 5i Series IP Ph one Release Notes Parameter – 802.1x root and intermediate certificates Aastra Web UI: Advanced Settings->802 .1x Support-> EAP-TLS Settings Configurati on Files aastra.
Features in Releas e 2.2 82 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Parameter – 802.1x trusted certi ficates Aastra Web UI: Advanced Settings->802 .1x Support-> EAP-TLS Settings Configurati on Files aastra.cfg, <mac>.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 83 5i Series IP Ph one Release Notes Configuring the 802.1x Protocol Us ing the IP Ph one UI Use the following procedure to configure the 8 02.1x Protocol on your phone using the IP Phone UI.
Features in Releas e 2.2 84 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 4 The PC PassThru Port is enable d by default. Note: The PC PassThru Port must be enabled to use the 802.1x Pro tocol. 5 Press Done . 6S e l e c t 802.1 x Settings.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 85 5i Series IP Ph one Release Notes 8S e l e c t EAP-MD5 to con figure the phone to use MD5 authentication; or Select EAP-TLS to configure the phone to use TLS authentica tion. Note: The 802.
Features in Releas e 2.2 86 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 12 Enter the identity or user name used for authenticati ng the phone. 13 Use the softkeys as applicable while entering the username; then press Done . 14 Enter the password used for authenticating the phone.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 87 5i Series IP Ph one Release Notes Configuring the 802.1x Protoco l Using the Aastra Web UI Use the following procedure to configure the 8 02.1x Protocol on your phone using the Aastra W eb UI.
Features in Releas e 2.2 88 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 21 Click on Advanced Settings->Networ k->Basic Network Settings . 22 The “ PC Port PassThr u Enab le/Dis able ” field is enabled by d efault. T o disabl e this field, uncheck the box.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 89 5i Series IP Ph one Release Notes 5 In the “ Privat e Key ” field, enter the filename that cont ains the private key . For example: privatekey .pem . 6 In the “ T r usted Certificates ” field, en ter the filename th at co ntains the trusted certificates.
Features in Releas e 2.2 90 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Improved Configuration File Encry ption The IP phones have an encryption feat ure that allows Service Providers the capability of storing encrypted files on t h eir server to protect against unauthorized access and tampering of sensitive info rmation (i.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 91 5i Series IP Ph one Release Notes XML Features SIP NOTIFY T riggers an XML Event In order for an XML push to bypass the NA T/ firewall, in Release 2.2 the ph one now supports a proprietary SIP NOTIFY event (aastra-xml) with or without XML content.
Features in Releas e 2.2 92 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 When the phone receives the SI P NOTIFY , it will trigger the action uri xml sip notify parameter , if it has been previously configur ed using the conf iguration files or the Aastra W eb UI.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 93 5i Series IP Ph one Release Notes Configuring XML SIP NOTIFY Feature Using the Config uration Files Y ou can enable or disable the XML SI.
Features in Releas e 2.2 94 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring XML SIP NOTIFY Feature Using the Aas tra W eb UI Use the following procedure to enable/d isable the XML SIP NOTIFY feature in the Aastra W eb UI.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 95 5i Series IP Ph one Release Notes Configuring the Action URI for a n empty XML SIP NOTIFY using the Configuration Files If the content is.
Features in Releas e 2.2 96 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring the Action URI for a n empty XML SIP NOTIFY using the Aastra W eb UI Use the following procedure to configur e the Action URI for an empty XML SIP NOTIFY using the Aastra W eb UI.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 97 5i Series IP Ph one Release Notes RTP and Multicast RTP via XML The IP Phones have new XML commands an Administrator can use with the “ AastraIPPhoneExecute ” object.
Features in Releas e 2.2 98 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 RTP R x The R TPRx URI instructs the phone to receive a Unicast R TP stream or stop receiving Unicast or Multicast R TP streams.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 99 5i Series IP Ph one Release Notes RT PT x The R TP Tx URI instructs the phone to transmit a Unicast R TP stream or to stop transmitting Unicast or Multicast R TP streams.
Features in Releas e 2.2 100 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 RTP M R x The R TPMRx URI instructs the phone to re c ei v e a Multicast R TP stream.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 101 5i Series IP Ph one Release Notes RTP M T x The R TPMTx URI instructs the phone to transmit a Multicast R TP stream.
Features in Releas e 2.2 102 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 T ext W rap for XML T extMenu Items The AastraIPPhoneT extMenu object now supports text wrapping on two lines for its items. This is done us ing a new attribute called " wrapList ".
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 103 5i Series IP Ph one Release Notes Configuring the T ext W rapping Para meter Y ou use the following parameter with the XML AastraIPPhoneT extMenu object: •w r a p L i s t Example <AastraIPPhoneTextMenu destr oyOnExit’”yes” wrapList =”yes”.
Features in Releas e 2.2 104 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Polling Action URI Another way to reach a pho ne behind a NA T/firewall is to ha ve the phone make an XML call at periodic intervals. A new Action URI was added in Release 2.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 105 5i Series IP Ph one Release Notes Configuring Polling Action URI via the Aastra W eb UI Use the following procedure to config ure polling Action URI using the Aastra We b U I . Aastra Web UI 1 Click on Advanced Settings->Action URI .
Features in Releas e 2.2 106 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Deployability Features SIP Registration S t atus in Aastra Web UI The IP Phones now show the SIP registra tion status on the IP Phone’ s Network S tatus screen in the Aastra W eb UI.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 107 5i Series IP Ph one Release Notes S t atus Cond ition Desription Registered Displays this status on accounts that HA VE been registered with the SIP proxy server . Example : Backup Registrar Line SIP Account Status Used? 1 9057604603 @anasipprox y.
Features in Releas e 2.2 108 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Support for HTTP and HTTPS Configuration Servers on Non-St andard Port s Prior to Release 2.2, the IP Phones us ed the def ault port numbers for loading configuration over HTTP (Port 80), HTTPS (Port 443) and DHCP option 66.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 109 5i Series IP Ph one Release Notes Configuring HTTP and HTTPS Port Using the IP Phone UI Use the following procedure to configur e the HTTP or HTTPS port using the IP Phone UI.
Features in Releas e 2.2 110 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 4 Enter the HTTP port that the server uses to load the configuration to the phone over HTTP . Press Done . 5 Press Options to save your changes and exit from the Options Menu.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 111 5i Series IP Ph one Release Notes Configuring HTTP and HTTPS Port Using the Aastra W eb UI Use the following procedure to config ure the HTTP or HTTPS port using the Aastra W eb UI.
Features in Releas e 2.2 112 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring HTTPS Port 1 Click on Advanced Settings->Configu ration Server->Settings .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 113 5i Series IP Ph one Release Notes Ability to Set TFTP and FTP Path for Confi guration Servers The IP Phones now allow the acqu isition of configuration files from subdirectories when connecting to either a TFTP or FTP server .
Features in Releas e 2.2 114 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Parameter – alternate tf tp path Aastra Web UI Advanced Setti ngs-> Configuration Serve r->Settings IP Phone UI Options->Administrator Menu-> Configuration Serve r->TFTP Setti ngs Configurati on Files aastra.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 115 5i Series IP Ph one Release Notes Configuring a TFTP or FTP Path Using the Aastra W eb UI Use the following procedure to configure a TFTP path or FTP path on the IP Phones.
Features in Releas e 2.2 116 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring FTP Path 1 Click on Advanced Settings->Configu ration Server->Settings . 2I n t h e “ FTP Path ” field, enter the path name for which the co n figuration files reside on th e FTP server for downloadi ng to the IP Ph one.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 117 5i Series IP Ph one Release Notes Configuring a TFTP or FTP Pa th Using the IP Phone UI Use the following procedure to configur e a TFTP or FTP path using the IP P hone UI. Aastra IP Phone UI Ste p Action Configuring TFTP Pat h 1 Press Options-> Administr ator Menu .
Features in Releas e 2.2 118 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 5 Press DONE to save the entry for the TFTP Path to th e phone’s configuration. Configuring Alternate TFTP Path 1 Press Options-> Administr ator Menu . 2 Enter your Ad ministrator password and press Enter .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 119 5i Series IP Ph one Release Notes 5 Press DONE to save the entry fo r the Alternate TFTP Pa th to the phone’s configuration. Configuring FTP Path 1 Press Options-> Administr ator Menu .
Features in Releas e 2.2 120 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 NA T T raversal Features Configurable SIP and TLS Source Port s A System Administrator can no w configur e the SIP and TLS source ports on the IP Phone. Previously , the IP phone used default values ( 5060 for UDP/TCP and 5061 for TLS).
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 121 5i Series IP Ph one Release Notes Configuring SIP and TLS Source Ports Using the Configuration Files Parameter – sip local port Aastra Web UI: Advanced Settings->Gl obal SIP-> Advanced SIP Settings Configurati on Files aastra.
Features in Releas e 2.2 122 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring SIP and TLS Source Ports Using the Aastra W eb UI Use the following procedure to configure SIP and TLS source ports using t he Aastra W eb UI. . Aastra Web UI 1 Click on Advanced Settings->Global SI P->Advanced SIP Settings.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 123 5i Series IP Ph one Release Notes RPORT Support The Session Initiation Protocol (SIP) operates over UDP and TCP .
Features in Releas e 2.2 124 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring Rport Using the Configuration Fil es Use the following parameter to configu re Rport on your phone.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 125 5i Series IP Ph one Release Notes Configuring Rport Using the Aas tra W eb UI Use the following procedure to configure Rp ort on your p hone using the Aastra We b U I . Aastra Web UI 1 Click on Advanced Settings->Network->Advance d Network Settings .
Features in Releas e 2.2 126 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 BroadSof t Interoperability Features CMS Support The IP phones now suppor t HTTP/HTTPS digest authentication as defined in RFC 2617. (The HTTP client supports digest authentication; the HTT P server does not; the HTTP server supports basic authentication).
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 127 5i Series IP Ph one Release Notes Configuring HTTP/HTTPS Digest Authenti cation Using the Configuration Files Use the following parameters to conf i gure HTTP/HTTPS Digest Authentication on the phone.
Features in Releas e 2.2 128 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 How it Works with the BroadSoft CMS T ool If you enable the HTTP/HTTPS digest auth entication feature, the phone behaves as follows with the BroadSoft CMS tool: 1.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 129 5i Series IP Ph one Release Notes 4. Press the “ Log In " key to displays the userna me/password screen.
Features in Releas e 2.2 130 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Server-Side Do Not Dis turb (DND), Call Forward (CFWD) , and Automatic Call Distribution (ACD) Support The IP phones now support server -side DND, CFWD, and ACD feature events.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 131 5i Series IP Ph one Release Notes When you press the DND, CFWD, or ACD key , onl y one attempt is made to enable/disable the “as-feature-event” feature on the server . The message “ T rying ” displays on the phone’ s LCD after pressing the key .
Features in Releas e 2.2 132 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Note: IMPOR T ANT ! If DND and CFWD are configured to use “ Account ” mode on the IP Phone, pressing the DND and CFWD ke ys apply to the account in focus as described in the section, “Account-Based Do Not Dis turb (DND) and Call Forward (CFWD)” .
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 133 5i Series IP Ph one Release Notes Configuring Server-Side DND, CFWD, and ACD Using the Configuration Files If the phone-side features of the DND, CFWD, and ACD keys a re enabled, the phone uses the existing parameter values fo r these keys .
Features in Releas e 2.2 134 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Configuring Server-Side DND, CFWD, and ACD Using the Aastra We b UI Use the following procedure to enable/dis able the server -si de “as-feature-event” on the IP Phone using the Aastra W e b UI.
Features in Release 2. 2 RN-001029-00, Rev 06, Re lease 2.2 135 5i Series IP Ph one Release Notes 4 Click on Advanced Settings->Global SI P->Advanced SIP Settings .
Issues Resolved on Series 5 i Phones in Release 2.2 136 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Issues Resolved on Series 5i Phones in Release 2.2 This section describes the issues resolv ed on the Series 5i IP phones in Release 2.
Issues Resolved o n Series 5i Phone s in Release 2.2 RN-001029-00, Rev 06, Re lease 2.2 137 5i Series IP Ph one Release Notes DEF08852 Auto-a nswer calls are no longer rejected when you are already in a call; the y are now treated as normal calls. Th e previo us behavior a ffected Fonality HUD users.
Issues Resolved on Series 5 i Phones in Release 2.2 138 RN-001029-00 , Rev 06, Release 2.2 IP Phone Release Notes 2.2 Robustness DEF07948 Phones now work properly whe n they fail to renew a registration, either because of network issues or because of SIP message floods.
Contacting Aastra Telecom Support RN-001029-00, Rev 06, Re lease 2.2 139 5i Series IP Ph one Release Notes Cont acting Aastra T elecom Support If you’ve read this release note, and consulted the T roubleshooting section of your phone model’ s manual and still have prob lems, please send inqu iries via email to support@aastra.
.
.
Generic SIP IP Phone Model 5i Series 2.2 Release Notes Copyright © 2008 Aastra T elecom. All rights reserv ed. Inform ation in this document is subject to change without notice. Aastra T elecom assumes no re sponsibility for any err ors that may appear in this document.
Een belangrijk punt na aankoop van elk apparaat Aastra REV 06 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Aastra REV 06 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Aastra REV 06 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Aastra REV 06 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Aastra REV 06 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Aastra REV 06 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Aastra REV 06 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Aastra REV 06 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
